mirror of
https://github.com/torvalds/linux.git
synced 2026-07-30 19:21:28 +02:00
net: mvmdio: Support setting the MDC frequency on XSMI controllers
Support the standard "clock-frequency" attribute to set the generated MDC frequency. If not specified, the driver will leave the divisor untouched. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231204100811.2708884-4-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
parent
7dd12fe346
commit
eb6a6605ff
|
|
@ -53,6 +53,13 @@
|
|||
#define MVMDIO_XSMI_BUSY BIT(30)
|
||||
#define MVMDIO_XSMI_ADDR_REG 0x8
|
||||
|
||||
#define MVMDIO_XSMI_CFG_REG 0xc
|
||||
#define MVMDIO_XSMI_CLKDIV_MASK 0x3
|
||||
#define MVMDIO_XSMI_CLKDIV_256 0x0
|
||||
#define MVMDIO_XSMI_CLKDIV_64 0x1
|
||||
#define MVMDIO_XSMI_CLKDIV_32 0x2
|
||||
#define MVMDIO_XSMI_CLKDIV_8 0x3
|
||||
|
||||
/*
|
||||
* SMI Timeout measurements:
|
||||
* - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
|
||||
|
|
@ -225,6 +232,40 @@ static int orion_mdio_xsmi_write_c45(struct mii_bus *bus, int mii_id,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void orion_mdio_xsmi_set_mdc_freq(struct mii_bus *bus)
|
||||
{
|
||||
struct orion_mdio_dev *dev = bus->priv;
|
||||
struct clk *mg_core;
|
||||
u32 div, freq, cfg;
|
||||
|
||||
if (device_property_read_u32(bus->parent, "clock-frequency", &freq))
|
||||
return;
|
||||
|
||||
mg_core = of_clk_get_by_name(bus->parent->of_node, "mg_core_clk");
|
||||
if (IS_ERR(mg_core)) {
|
||||
dev_err(bus->parent,
|
||||
"MG core clock unknown, not changing MDC frequency");
|
||||
return;
|
||||
}
|
||||
|
||||
div = clk_get_rate(mg_core) / (freq + 1) + 1;
|
||||
clk_put(mg_core);
|
||||
|
||||
if (div <= 8)
|
||||
div = MVMDIO_XSMI_CLKDIV_8;
|
||||
else if (div <= 32)
|
||||
div = MVMDIO_XSMI_CLKDIV_32;
|
||||
else if (div <= 64)
|
||||
div = MVMDIO_XSMI_CLKDIV_64;
|
||||
else
|
||||
div = MVMDIO_XSMI_CLKDIV_256;
|
||||
|
||||
cfg = readl(dev->regs + MVMDIO_XSMI_CFG_REG);
|
||||
cfg &= ~MVMDIO_XSMI_CLKDIV_MASK;
|
||||
cfg |= div;
|
||||
writel(cfg, dev->regs + MVMDIO_XSMI_CFG_REG);
|
||||
}
|
||||
|
||||
static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct orion_mdio_dev *dev = dev_id;
|
||||
|
|
@ -303,6 +344,9 @@ static int orion_mdio_probe(struct platform_device *pdev)
|
|||
dev_warn(&pdev->dev,
|
||||
"unsupported number of clocks, limiting to the first "
|
||||
__stringify(ARRAY_SIZE(dev->clk)) "\n");
|
||||
|
||||
if (type == BUS_TYPE_XSMI)
|
||||
orion_mdio_xsmi_set_mdc_freq(bus);
|
||||
} else {
|
||||
dev->clk[0] = clk_get(&pdev->dev, NULL);
|
||||
if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) {
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user