diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index a48586bb8edb..07b7f8ab0ccb 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1818,6 +1818,18 @@ endmenu menu "Auxiliary Bus GPIO drivers" depends on AUXILIARY_BUS +config GPIO_AD7768 + tristate "Analog Devices AD7768 GPIO support" + depends on AD7768 + depends on GPIOLIB + select GPIO_REGMAP + help + Say yes here to expose the AD7768 utility pins as GPIOs when the + device tree node is marked as a GPIO controller. + + To compile this driver as a module, choose M here: the module will be + called gpio-ad7768. + config GPIO_LTC4283 tristate "Analog Devices LTC4283 GPIO support" depends on SENSORS_LTC4283 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index dc9e6d643b5b..ce56e9b3f55d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_104_IDI_48) += gpio-104-idi-48.o obj-$(CONFIG_GPIO_104_IDIO_16) += gpio-104-idio-16.o obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o +obj-$(CONFIG_GPIO_AD7768) += gpio-ad7768.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5585) += gpio-adp5585.o diff --git a/drivers/gpio/gpio-ad7768.c b/drivers/gpio/gpio-ad7768.c new file mode 100644 index 000000000000..c37e1ac30612 --- /dev/null +++ b/drivers/gpio/gpio-ad7768.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Analog Devices AD7768 GPIO auxiliary driver + * + * Copyright 2026 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AD7768_REG_GPIO_CONTROL 0x0E +#define AD7768_GPIO_UGPIO_ENABLE BIT(7) + +#define AD7768_REG_GPIO_WRITE 0x0F +#define AD7768_REG_GPIO_READ 0x10 + +#define AD7768_NUM_GPIOS 5 +#define AD7768_FILTER_GPIO 4 + +static int ad7768_gpio_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + if (ngpios > AD7768_FILTER_GPIO && + fwnode_property_match_string(gc->fwnode, "clock-names", "mclk") < 0) + __clear_bit(AD7768_FILTER_GPIO, valid_mask); + + return 0; +} + +static int ad7768_gpio_reg_mask_xlate(struct gpio_regmap *gpio, + enum gpio_regmap_operation op, + unsigned int base, unsigned int offset, + unsigned int *reg, unsigned int *mask) +{ + struct regmap *regmap = gpio_regmap_get_drvdata(gpio); + int ret; + + *reg = base; + *mask = BIT(offset); + + if (op != GPIO_REGMAP_GET_OP) + return 0; + + /* + * AD7768 has separate input-state and output-latch registers. For an + * output line, report the programmed value from the output latch; + * input lines continue to use the input-state register. + */ + ret = regmap_test_bits(regmap, AD7768_REG_GPIO_CONTROL, *mask); + if (ret < 0) + return ret; + if (ret) + *reg = AD7768_REG_GPIO_WRITE; + + return 0; +} + +static int ad7768_gpio_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct gpio_regmap_config config; + struct device *dev = &adev->dev; + struct device *parent = dev->parent; + struct regmap *map; + int ret; + + map = dev_get_regmap(parent, NULL); + if (!map) + return -ENODEV; + + PM_RUNTIME_ACQUIRE_AUTOSUSPEND(parent, pm); + ret = PM_RUNTIME_ACQUIRE_ERR(&pm); + if (ret) + return ret; + + ret = regmap_set_bits(map, AD7768_REG_GPIO_CONTROL, AD7768_GPIO_UGPIO_ENABLE); + if (ret) + return ret; + + config = (struct gpio_regmap_config) { + .parent = dev, + .regmap = map, + .label = dev_name(parent), + .ngpio = AD7768_NUM_GPIOS, + .reg_dat_base = AD7768_REG_GPIO_READ, + .reg_set_base = AD7768_REG_GPIO_WRITE, + .reg_dir_out_base = AD7768_REG_GPIO_CONTROL, + .pm_dev = parent, + .fwnode = dev_fwnode(parent), + .reg_mask_xlate = ad7768_gpio_reg_mask_xlate, + .init_valid_mask = ad7768_gpio_init_valid_mask, + .drvdata = map, + }; + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &config)); +} + +static const struct auxiliary_device_id ad7768_gpio_ids[] = { + { .name = "ad7768.gpio" }, + { } +}; +MODULE_DEVICE_TABLE(auxiliary, ad7768_gpio_ids); + +static struct auxiliary_driver ad7768_gpio_driver = { + .probe = ad7768_gpio_probe, + .id_table = ad7768_gpio_ids, +}; +module_auxiliary_driver(ad7768_gpio_driver); + +MODULE_AUTHOR("Janani Sunil "); +MODULE_DESCRIPTION("Analog Devices AD7768 GPIO auxiliary driver"); +MODULE_LICENSE("GPL");