diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml
new file mode 100644
index 000000000000..f028d2cec7ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/zte.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/zte.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZTE zx platforms
+
+maintainers:
+  - Stefan Dösinger <stefandoesinger@gmail.com>
+
+description: |
+  ARM platforms using SoCs designed by ZTE. Currently this supports devices
+  based on the zx297520v3 SoC which is found in LTE routers.
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - dlink,dwr932m
+          - const: zte,zx297520v3
+
+additionalProperties: true
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe38eb25301..28fba538d552 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -39,3 +39,4 @@ subdir-y += unisoc
 subdir-y += vt8500
 subdir-y += xen
 subdir-y += xilinx
+subdir-y += zte
diff --git a/arch/arm/boot/dts/zte/Makefile b/arch/arm/boot/dts/zte/Makefile
new file mode 100644
index 000000000000..f052cfbd636c
--- /dev/null
+++ b/arch/arm/boot/dts/zte/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_SOC_ZX297520V3) += \
+	zx297520v3-dlink-dwr932m.dtb
diff --git a/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts b/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts
new file mode 100644
index 000000000000..1700f46aba86
--- /dev/null
+++ b/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2026 Stefan Dösinger <stefandoesinger@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "zx297520v3.dtsi"
+
+/ {
+	model = "D-Link DWR-932M";
+	compatible = "dlink,dwr932m", "zte,zx297520v3";
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zte/zx297520v3.dtsi b/arch/arm/boot/dts/zte/zx297520v3.dtsi
new file mode 100644
index 000000000000..a16c30a164bb
--- /dev/null
+++ b/arch/arm/boot/dts/zte/zx297520v3.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2026 Stefan Dösinger <stefandoesinger@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+		};
+	};
+
+	/* Base bus clock and default for the UART. It will be replaced once a clock driver has
+	 * been added.
+	 */
+	uartclk: uartclk-26000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		clock-frequency = <26000000>;
+		interrupt-parent = <&gic>;
+		/* I don't think uboot sets CNTVOFF and the stock kernel doesn't use the
+		 * arm timer at all. Since this is a single CPU system I don't think it
+		 * really matters that the offset is random though.
+		 */
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		/* The GIC has a non-standard way of configuring ints between level-low/level
+		 * high or rising edge/falling edge at 0xf2202070 and onwards. See AP_INT_MODE_BASE
+		 * and AP_PPI_MODE_REG in the ZTE kernel, although the offsets in the kernel source
+		 * seem wrong.
+		 *
+		 * Everything defaults to active-high/rising edge, but the timer is active-low. We
+		 * currently rely on the boot loader to change timer IRQs to active-low for us for
+		 * now.
+		 */
+		gic: interrupt-controller@f2000000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xf2000000 0x10000>,
+			      <0xf2040000 0x20000>;
+		};
+
+		uart0: serial@131000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x0018c011>;
+			reg = <0x00131000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&uartclk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@1408000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x0018c011>;
+			reg = <0x01408000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&uartclk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@140d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x0018c011>;
+			reg = <0x0140d000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&uartclk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};