From e6532261b1514d99cfa07db05c1fafaf32ffbfb2 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Thu, 21 May 2026 15:15:44 -0400 Subject: [PATCH] ARM: dts: imx6-display5: replace marvell,88E1510 with ethernet-phy-ieee802.3-c22 Replace the vendor-specific PHY compatible string with the generic ethernet-phy-ieee802.3-c22 compatible. The marvell,88E1510 compatible is listed in whitelist_phys[] and is never matched against a PHY driver. PHY devices are expected to use the generic ethernet-phy-ieee802.3-c22 compatible unless a specific MDIO driver match is required. The 88E1510 is compatible with Clause 22 PHY devices, so use the generic compatible string instead. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dtb: /soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@0: failed to match any schema with compatible: ['marvell,88E1510'] Known other user (uboot) did not use marvell,88E1510. Signed-off-by: Frank Li --- arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi index 4e448b4810f2..21e8bbdab4e6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi @@ -208,7 +208,7 @@ mdio { #address-cells = <1>; #size-cells = <0>; ethernet_phy0: ethernet-phy@0 { - compatible = "marvell,88E1510"; + compatible = "ethernet-phy-ieee802.3-c22"; device_type = "ethernet-phy"; /* Set LED0 control: */ /* On - Link, Blink - Activity, Off - No Link */