diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 0fe52c73fc8f..4efdc6bdfe12 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -38,6 +38,18 @@ fan0: fan { #cooling-cells = <2>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + panel_lvds1: panel-lvds1 { /* compatible panel in overlay */ backlight = <&backlight_lvds1>; @@ -126,6 +138,13 @@ reg_vcc_1v8_exp_con: regulator-vcc-1v8 { regulator-name = "VCC_1V8_EXP_CON"; }; + sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "audio-hdmi"; + audio-cpu = <&aud2htx>; + hdmi-out; + }; + thermal-zones { soc-thermal { trips { @@ -146,6 +165,10 @@ map1 { }; }; +&aud2htx { + status = "okay"; +}; + /* TPM */ &ecspi1 { #address-cells = <1>; @@ -201,6 +224,32 @@ &flexcan2 { status = "okay"; }; +&hdmi_pai { + status = "okay"; +}; + +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -244,6 +293,10 @@ &i2c3 { scl-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; +&lcdif3 { + status = "okay"; +}; + &ldb_lvds_ch1 { remote-endpoint = <&panel1_in>; }; @@ -444,6 +497,15 @@ MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2