diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 7ead87b4eb65..1e39122ec09f 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -158,6 +158,7 @@ static const struct uart_ops qcom_geni_uart_pops;
 static struct uart_driver qcom_geni_console_driver;
 static struct uart_driver qcom_geni_uart_driver;
 
+static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport);
 static void __qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport);
 static void qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport);
 static int qcom_geni_serial_port_setup(struct uart_port *uport);
@@ -636,35 +637,34 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
 	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
 }
 
+static void qcom_geni_serial_flush_buffer_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+
+	qcom_geni_serial_stop_tx_dma(uport);
+	port->tx_remaining = 0;
+	port->tx_queued = 0;
+}
+
 static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
-	bool done;
 
-	if (!qcom_geni_serial_main_active(uport))
-		return;
+	if (qcom_geni_serial_main_active(uport))
+		__qcom_geni_serial_cancel_tx_cmd(uport);
 
 	if (port->tx_dma_addr) {
+		writel(1, uport->membase + SE_DMA_TX_FSM_RST);
+		if (!qcom_geni_serial_poll_bit(uport, SE_DMA_TX_IRQ_STAT,
+					       TX_RESET_DONE, true))
+			dev_err_ratelimited(uport->dev, "TX DMA reset failed");
+		writel(TX_RESET_DONE | TX_DMA_DONE,
+		       uport->membase + SE_DMA_TX_IRQ_CLR);
+
 		geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr,
 				      port->tx_remaining);
 		port->tx_dma_addr = 0;
-		port->tx_remaining = 0;
 	}
-
-	geni_se_cancel_m_cmd(&port->se);
-
-	done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
-					 M_CMD_CANCEL_EN, true);
-	if (!done) {
-		geni_se_abort_m_cmd(&port->se);
-		done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
-						 M_CMD_ABORT_EN, true);
-		if (!done)
-			dev_err_ratelimited(uport->dev, "M_CMD_ABORT_EN not set");
-		writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
-	}
-
-	writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 }
 
 static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
@@ -1180,7 +1180,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	uart_port_unlock_irq(uport);
 }
 
-static void qcom_geni_serial_flush_buffer(struct uart_port *uport)
+static void qcom_geni_serial_flush_buffer_fifo(struct uart_port *uport)
 {
 	qcom_geni_serial_cancel_tx_cmd(uport);
 }
@@ -1769,7 +1769,7 @@ static const struct uart_ops qcom_geni_console_pops = {
 	.request_port = qcom_geni_serial_request_port,
 	.config_port = qcom_geni_serial_config_port,
 	.shutdown = qcom_geni_serial_shutdown,
-	.flush_buffer = qcom_geni_serial_flush_buffer,
+	.flush_buffer = qcom_geni_serial_flush_buffer_fifo,
 	.type = qcom_geni_serial_get_type,
 	.set_mctrl = qcom_geni_serial_set_mctrl,
 	.get_mctrl = qcom_geni_serial_get_mctrl,
@@ -1792,6 +1792,7 @@ static const struct uart_ops qcom_geni_uart_pops = {
 	.request_port = qcom_geni_serial_request_port,
 	.config_port = qcom_geni_serial_config_port,
 	.shutdown = qcom_geni_serial_shutdown,
+	.flush_buffer = qcom_geni_serial_flush_buffer_dma,
 	.type = qcom_geni_serial_get_type,
 	.set_mctrl = qcom_geni_serial_set_mctrl,
 	.get_mctrl = qcom_geni_serial_get_mctrl,