mirror of
https://github.com/torvalds/linux.git
synced 2026-05-30 18:13:41 +02:00
arm64: dts: qcom: Add The Fairphone (Gen. 6)
Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based on the Milos/SM7635 SoC. Supported functionality as of this initial submission: * Debug UART * Regulators (PM7550, PM8550VS, PMR735B, PM8008) * Remoteprocs (ADSP, CDSP, MPSS, WPSS) * Power Button, Volume Keys, Switch * PMIC-GLINK (Charger, Fuel gauge, USB-C mode switching) * Camera flash/torch LED * SD card * USB Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-9-b05fddd8b45c@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Luca Weiss
Bjorn Andersson
parent
d9d59d105f
commit
e25834d769
|
|
@ -39,6 +39,7 @@ lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo
|
|||
|
||||
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
|
||||
|
|
|
|||
790
arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
Normal file
790
arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
Normal file
|
|
@ -0,0 +1,790 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#define PMIV0104_SID 7
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "milos.dtsi"
|
||||
#include "pm7550.dtsi"
|
||||
#include "pm8550vs.dtsi"
|
||||
#include "pmiv0104.dtsi" /* PMIV0108 */
|
||||
#include "pmk8550.dtsi" /* PMK7635 */
|
||||
#include "pmr735b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "The Fairphone (Gen. 6)";
|
||||
compatible = "fairphone,fp6", "qcom,milos";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart5;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&volume_up_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
switch {
|
||||
label = "Switch";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_MUTE_DEVICE>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic-glink {
|
||||
compatible = "qcom,milos-pmic-glink",
|
||||
"qcom,sm8550-pmic-glink",
|
||||
"qcom,pmic-glink";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
connector@0 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <0>;
|
||||
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vreg_ff_afvdd_2p8: regulator-ff-afvdd-2p8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ff_afvdd_2p8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 93 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_bob>;
|
||||
};
|
||||
|
||||
vreg_uw_afvdd_2p8: regulator-uw-afvdd-2p8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uw_afvdd_2p8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_bob>;
|
||||
};
|
||||
|
||||
vreg_uw_dvdd: regulator-uw-dvdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uw_dvdd";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 28 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_s1b>;
|
||||
};
|
||||
|
||||
vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ois_avdd0_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_bob>;
|
||||
};
|
||||
|
||||
vreg_ois_vdd: regulator-ois-vdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ois_vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
vreg_oled_dvdd_1p2: regulator-oled-dvdd-1p2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "oled_dvdd_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_s2b>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_s1j: regulator-pm3001a-s1j {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pm3001a_s1j";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
startup-delay-us = <1000>;
|
||||
|
||||
gpio = <&pmr735b_gpios 1 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
|
||||
pinctrl-0 = <&s1j_enable_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vreg_vtof_ldo_3p3: regulator-vtof-ldo-3p3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtof_ldo_3p3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100>;
|
||||
|
||||
gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
pm8008-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
thermal-sensors = <&pm8008>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm7550-rpmh-regulators";
|
||||
|
||||
vdd-l1-supply = <&vreg_s1b>;
|
||||
vdd-l2-l3-supply = <&vreg_s3b>;
|
||||
vdd-l4-l5-supply = <&vreg_s2b>;
|
||||
vdd-l6-supply = <&vreg_s2b>;
|
||||
vdd-l7-supply = <&vreg_s1b>;
|
||||
vdd-l8-supply = <&vreg_s1b>;
|
||||
vdd-l9-l10-supply = <&vreg_s1b>;
|
||||
vdd-l11-supply = <&vreg_s1b>;
|
||||
vdd-l12-l14-supply = <&vreg_bob>;
|
||||
vdd-l13-l16-supply = <&vreg_bob>;
|
||||
vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
vreg_s1b: smps1 {
|
||||
regulator-name = "vreg_s1b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2080000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s2b: smps2 {
|
||||
regulator-name = "vreg_s2b";
|
||||
regulator-min-microvolt = <1256000>;
|
||||
regulator-max-microvolt = <1408000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s3b: smps3 {
|
||||
regulator-name = "vreg_s3b";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2b: ldo2 {
|
||||
regulator-name = "vreg_l2b";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3b: ldo3 {
|
||||
regulator-name = "vreg_l3b";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <912000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4b: ldo4 {
|
||||
regulator-name = "vreg_l4b";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5b: ldo5 {
|
||||
regulator-name = "vreg_l5b";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7b: ldo7 {
|
||||
regulator-name = "vreg_l7b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8b: ldo8 {
|
||||
regulator-name = "vreg_l8b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9b: ldo9 {
|
||||
regulator-name = "vreg_l9b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10b: ldo10 {
|
||||
regulator-name = "vreg_l10b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11b: ldo11 {
|
||||
regulator-name = "vreg_l11b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12b: ldo12 {
|
||||
regulator-name = "vreg_l12b";
|
||||
/*
|
||||
* Skip voltage voting for UFS VCC.
|
||||
*/
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13b: ldo13 {
|
||||
regulator-name = "vreg_l13b";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14b: ldo14 {
|
||||
regulator-name = "vreg_l14b";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15b: ldo15 {
|
||||
regulator-name = "vreg_l15b";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16b: ldo16 {
|
||||
regulator-name = "vreg_l16b";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17b: ldo17 {
|
||||
regulator-name = "vreg_l17b";
|
||||
regulator-min-microvolt = <3104000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18b: ldo18 {
|
||||
regulator-name = "vreg_l18b";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19b: ldo19 {
|
||||
regulator-name = "vreg_l19b";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20b: ldo20 {
|
||||
regulator-name = "vreg_l20b";
|
||||
regulator-min-microvolt = <1620000>;
|
||||
regulator-max-microvolt = <3544000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21b: ldo21 {
|
||||
regulator-name = "vreg_l21b";
|
||||
regulator-min-microvolt = <1620000>;
|
||||
regulator-max-microvolt = <3544000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22b: ldo22 {
|
||||
regulator-name = "vreg_l22b";
|
||||
regulator-min-microvolt = <3200000>;
|
||||
regulator-max-microvolt = <3200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l23b: ldo23 {
|
||||
regulator-name = "vreg_l23b";
|
||||
regulator-min-microvolt = <1650000>;
|
||||
regulator-max-microvolt = <3544000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-name = "vreg_bob";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8550vs-rpmh-regulators";
|
||||
|
||||
vdd-l1-supply = <&vreg_s3b>;
|
||||
vdd-l3-supply = <&vreg_s3b>;
|
||||
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vreg_l2c: ldo2 {
|
||||
regulator-name = "vreg_l2c";
|
||||
regulator-min-microvolt = <320000>;
|
||||
regulator-max-microvolt = <650000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmr735b-rpmh-regulators";
|
||||
|
||||
vdd-l1-l2-supply= <&vreg_s3b>;
|
||||
vdd-l3-supply= <&vreg_s3b>;
|
||||
vdd-l4-supply= <&vreg_s1b>;
|
||||
vdd-l5-supply= <&vreg_s2b>;
|
||||
vdd-l6-supply= <&vreg_s2b>;
|
||||
vdd-l7-l8-supply= <&vreg_s2b>;
|
||||
vdd-l9-supply= <&vreg_s3b>;
|
||||
vdd-l10-supply= <&vreg_s1b>;
|
||||
vdd-l11-supply= <&vreg_s3b>;
|
||||
vdd-l12-supply= <&vreg_s3b>;
|
||||
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
vreg_l1f: ldo1 {
|
||||
regulator-name = "vreg_l1f";
|
||||
regulator-min-microvolt = <852000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2f: ldo2 {
|
||||
regulator-name = "vreg_l2f";
|
||||
regulator-min-microvolt = <751000>;
|
||||
regulator-max-microvolt = <824000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3f: ldo3 {
|
||||
regulator-name = "vreg_l3f";
|
||||
regulator-min-microvolt = <650000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4f: ldo4 {
|
||||
regulator-name = "vreg_l4f";
|
||||
regulator-min-microvolt = <1700000>;
|
||||
regulator-max-microvolt = <1950000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5f: ldo5 {
|
||||
regulator-name = "vreg_l5f";
|
||||
regulator-min-microvolt = <1140000>;
|
||||
regulator-max-microvolt = <1260000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6f: ldo6 {
|
||||
regulator-name = "vreg_l6f";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7f: ldo7 {
|
||||
regulator-name = "vreg_l7f";
|
||||
regulator-min-microvolt = <1080000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8f: ldo8 {
|
||||
regulator-name = "vreg_l8f";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9f: ldo9 {
|
||||
regulator-name = "vreg_l9f";
|
||||
regulator-min-microvolt = <870000>;
|
||||
regulator-max-microvolt = <970000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10f: ldo10 {
|
||||
regulator-name = "vreg_l10f";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11f: ldo11 {
|
||||
regulator-name = "vreg_l11f";
|
||||
regulator-min-microvolt = <320000>;
|
||||
regulator-max-microvolt = <864000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>,
|
||||
<GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>,
|
||||
<GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
|
||||
<GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
|
||||
<GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>,
|
||||
<GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
/* Samsung NFC @ 0x27 */
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
/* AW88261FCR amplifier (top) @ 0x34 */
|
||||
/* AW88261FCR amplifier (bottom) @ 0x35 */
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
pm8008: pmic@8 {
|
||||
compatible = "qcom,pm8008";
|
||||
reg = <0x8>;
|
||||
|
||||
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_RISING>;
|
||||
reset-gpios = <&pmr735b_gpios 3 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vdd-l1-l2-supply = <&vreg_s2b>;
|
||||
vdd-l3-l4-supply = <&vreg_bob>;
|
||||
vdd-l5-supply = <&vreg_bob>;
|
||||
vdd-l6-supply = <&vreg_s1b>;
|
||||
vdd-l7-supply = <&vreg_bob>;
|
||||
|
||||
pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pm8008 0 0 2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
#thermal-sensor-cells = <0>;
|
||||
|
||||
regulators {
|
||||
vreg_l1p: ldo1 {
|
||||
regulator-name = "vreg_l1p";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
vreg_l2p: ldo2 {
|
||||
regulator-name = "vreg_l2p";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1144000>;
|
||||
};
|
||||
|
||||
vreg_l3p: ldo3 {
|
||||
regulator-name = "vreg_l3p";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
vreg_l4p: ldo4 {
|
||||
regulator-name = "vreg_l4p";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
vreg_l5p: ldo5 {
|
||||
regulator-name = "vreg_l5p";
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
vreg_l6p: ldo6 {
|
||||
regulator-name = "vreg_l6p";
|
||||
regulator-min-microvolt = <1700000>;
|
||||
regulator-max-microvolt = <1896000>;
|
||||
};
|
||||
|
||||
vreg_l7p: ldo7 {
|
||||
regulator-name = "vreg_l7p";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* VL53L3 ToF @ 0x29 */
|
||||
/* AW86938FCR vibrator @ 0x5a */
|
||||
};
|
||||
|
||||
&pm8550vs_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmiv0104_eusb2_repeater {
|
||||
vdd18-supply = <&vreg_l7b>;
|
||||
vdd3-supply = <&vreg_l17b>;
|
||||
|
||||
qcom,tune-res-fsdif = /bits/ 8 <0x5>;
|
||||
qcom,tune-usb2-amplitude = /bits/ 8 <0x8>;
|
||||
qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>;
|
||||
qcom,tune-usb2-preem = /bits/ 8 <0x6>;
|
||||
};
|
||||
|
||||
&pmr735b_gpios {
|
||||
s1j_enable_default: s1j-enable-default-state {
|
||||
pins = "gpio1";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <0>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
pm8008_reset_n_default: pm8008-reset-n-default-state {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
&pm7550_gpios {
|
||||
volume_up_default: volume-up-default-state {
|
||||
pins = "gpio6";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <1>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pm7550_flash {
|
||||
status = "okay";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-sources = <1>, <4>;
|
||||
led-max-microamp = <350000>;
|
||||
flash-max-microamp = <1500000>;
|
||||
flash-max-timeout-us = <400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
firmware-name = "qcom/milos/fairphone/fp6/adsp.mbn",
|
||||
"qcom/milos/fairphone/fp6/adsp_dtb.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
firmware-name = "qcom/milos/fairphone/fp6/cdsp.mbn",
|
||||
"qcom/milos/fairphone/fp6/cdsp_dtb.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
firmware-name = "qcom/milos/fairphone/fp6/modem.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_wpss {
|
||||
firmware-name = "qcom/milos/fairphone/fp6/wpss.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vmmc-supply = <&vreg_l13b>;
|
||||
vqmmc-supply = <&vreg_l23b>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
|
||||
pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
|
||||
pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
/* Eswin EPH8621 touchscreen @ 0 */
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <8 4>, /* Fingerprint SPI */
|
||||
<13 1>, /* NC */
|
||||
<63 2>; /* WLAN UART */
|
||||
|
||||
sdc2_card_det_n: sdc2-card-det-state {
|
||||
pins = "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pm8008_int_default: pm8008-int-default-state {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
dr_mode = "otg";
|
||||
|
||||
/* USB 2.0 only, HW does not support USB 3.x */
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vreg_l2b>;
|
||||
vdda12-supply = <&vreg_l4b>;
|
||||
|
||||
phys = <&pmiv0104_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user