github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-07-30 11:11:26 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: Add support for LX2160 Twins board in single configuration

Browse Source 
Add support for the SolidRun LX2160A Twins board in its single cpu
configuration.

The twins board is designed to host a pair of LX2160A CEX-7 modules,
sharing a single PCI-E connector in multi-host mode.

It may be assembled in two configurations (different assembly options
facilitating signal re-routing), with a single or with dual CEX-7
module. Their marketing names are:

- SolidWAN Single LX2160
- SolidWAN Dual LX2160

Add the single configuration, featuring:
- 8x SFP (1Gbps)
- 8x SFP+ (1/10Gbps)
- PCI-E OCP card connector
- USB-3.0 front-panel header with single port
- microSD
- dual hot-swappable power supplies

Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This commit is contained in:
Josua Mayer 2026-05-24 16:54:48 +02:00 committed by Frank Li
parent 76eeabd859
commit df70a90b03
4 changed files with 848 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm64/boot/dts/freescale/Makefile
View File

@ -51,6 +51,8 @@ DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
DTC_FLAGS_fsl-lx2160a-half-twins := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-half-twins.dtb
DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map

8
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
View File

@ -65,7 +65,7 @@ i2c-mux@77 {
#size-cells = <0>;
reg = <0x77>;
i2c@0 {
ddr_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@ -91,7 +91,7 @@ eeprom@57 {
};
};
i2c@1 {
fan_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
@ -102,7 +102,7 @@ fan-temperature-ctrlr@18 {
};
};
i2c@2 {
power_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
@ -113,7 +113,7 @@ regulator@5c {
};
};
i2c@3 {
i2c_smb: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;

830
arch/arm64/boot/dts/freescale/fsl-lx2160a-half-twins.dts Normal file
View File

@ -0,0 +1,830 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for single LX2160A CEX-7 on Twins board.
//
// Copyright 2022 SolidRun Ltd.
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "fsl-lx2160a-rev2.dtsi"
#include "fsl-lx2160a-cex7.dtsi"
/ {
compatible = "solidrun,twins-single", "solidrun,lx2160a-cex7", "fsl,lx2160a";
model = "SolidRun LX2160A SolidWAN Single";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &expander0;
gpio5 = &expander1;
gpio6 = &expander2;
gpio7 = &expander3;
i2c0 = &i2c0;
i2c1 = &i2c2;
i2c2 = &i2c4;
i2c3 = &fan_i2c;
i2c4 = &power_i2c;
i2c5 = &i2c_smb;
i2c6 = &sfp0_i2c;
i2c7 = &sfp1_i2c;
i2c8 = &sfp2_i2c;
i2c9 = &sfp3_i2c;
i2c10 = &twins_sfp_c1_at_i2c;
i2c11 = &twins_sfp_c1_ab_i2c;
i2c12 = &twins_sfp_c1_bt_i2c;
i2c13 = &twins_sfp_c1_bb_i2c;
i2c14 = &twins_sfp_c2_at_i2c;
i2c15 = &twins_sfp_c2_ab_i2c;
i2c16 = &twins_sfp_c2_bt_i2c;
i2c17 = &twins_sfp_c2_bb_i2c;
i2c18 = &twins_sfp_c3_at_i2c;
i2c19 = &twins_sfp_c3_ab_i2c;
i2c20 = &twins_sfp_c3_bt_i2c;
i2c21 = &twins_sfp_c3_bb_i2c;
i2c22 = &htwins_sfp_c3_at_i2c;
i2c23 = &htwins_sfp_c3_ab_i2c;
i2c24 = &htwins_sfp_c3_bt_i2c;
i2c25 = &htwins_sfp_c3_bb_i2c;
i2c26 = &ddr_i2c;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led_ht_c3_bt: led-sfp-1 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&expander3 14 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac5>;
linux,default-trigger = "netdev";
};
led_ht_c3_bb: led-sfp-2 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&expander3 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac15>;
linux,default-trigger = "netdev";
};
led_ht_c3_at: led-sfp-3 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
gpios = <&expander3 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac6>;
linux,default-trigger = "netdev";
};
led_ht_c3_ab: led-sfp-4 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <4>;
gpios = <&expander3 12 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac11>;
linux,default-trigger = "netdev";
};
led_c1_bt: led-sfp-9 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <9>;
gpios = <&expander1 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac4>;
linux,default-trigger = "netdev";
};
led_c1_bb: led-sfp-10 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <10>;
gpios = <&expander1 3 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac17>;
linux,default-trigger = "netdev";
};
led_c1_at: led-sfp-11 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <11>;
gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac3>;
linux,default-trigger = "netdev";
};
led_c1_ab: led-sfp-12 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <12>;
gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac12>;
linux,default-trigger = "netdev";
};
led_c2_bt: led-sfp-13 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <13>;
gpios = <&expander1 10 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac8>;
linux,default-trigger = "netdev";
};
led_c2_bb: led-sfp-14 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <14>;
gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac16>;
linux,default-trigger = "netdev";
};
led_c2_at: led-sfp-15 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <15>;
gpios = <&expander1 5 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac7>;
linux,default-trigger = "netdev";
};
led_c2_ab: led-sfp-16 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <16>;
gpios = <&expander1 6 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac18>;
linux,default-trigger = "netdev";
};
led_c3_bt: led-sfp-17 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <17>;
gpios = <&expander1 14 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac10>;
linux,default-trigger = "netdev";
};
led_c3_bb: led-sfp-18 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <18>;
gpios = <&expander1 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac14>;
linux,default-trigger = "netdev";
};
led_c3_at: led-sfp-19 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <19>;
gpios = <&expander1 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac9>;
linux,default-trigger = "netdev";
};
led_c3_ab: led-sfp-20 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_LAN;
function-enumerator = <20>;
gpios = <&expander1 12 GPIO_ACTIVE_LOW>;
trigger-sources = <&dpmac13>;
linux,default-trigger = "netdev";
};
led-status {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_STATUS;
function-enumerator = <0>;
gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
led-status-twin {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_STATUS;
function-enumerator = <1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
led-fault {
color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
function = LED_FUNCTION_FAULT;
function-enumerator = <0>;
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led-fault-twin {
color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
function = LED_FUNCTION_FAULT;
function-enumerator = <1>;
gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
};
};
mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
/*
* This gpio controlled mux can route the tacho signals of 6 PWM FAN connectors
* to the tacho inputs of both CEX-7 modules (twins).
*
* The first twin controls this mux and monitors four fan connectors, two intended
* for itself, and two for the OCP card.
*
* The second twin monitors only two fan connectors intended for itself.
*
* The table below maps selector GPIO states to monitored fan connector per twin:
*
* | SEL1 | SEL0 | Twin 1 | Twin 2 |
* | ---: | ---: | :------| ------ |
* | 0 | 0 | J10 | J5024 |
* | 0 | 1 | J5016 | J5024 |
* | 1 | 0 | J5026 | J5025 |
* | 1 | 1 | J5013 | J5025 |
*/
mux-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>, /* SEL0 */
<&expander0 15 GPIO_ACTIVE_HIGH>; /* SEL1 */
};
ht_c3_bt_sfp: sfp-1 {
compatible = "sff,sfp";
i2c-bus = <&htwins_sfp_c3_bt_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander2 13 GPIO_ACTIVE_LOW>;
};
ht_c3_bb_sfp: sfp-2 {
compatible = "sff,sfp";
i2c-bus = <&htwins_sfp_c3_bb_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander2 14 GPIO_ACTIVE_LOW>;
};
ht_c3_at_sfp: sfp-3 {
compatible = "sff,sfp";
i2c-bus = <&htwins_sfp_c3_at_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander2 11 GPIO_ACTIVE_LOW>;
};
ht_c3_ab_sfp: sfp-4 {
compatible = "sff,sfp";
i2c-bus = <&htwins_sfp_c3_ab_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
};
c1_bt_sfp: sfp-9 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c1_bt_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
};
c1_bb_sfp: sfp-10 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c1_bb_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 4 GPIO_ACTIVE_LOW>;
};
c1_at_sfp: sfp-11 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c1_at_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
};
c1_ab_sfp: sfp-12 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c1_ab_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
};
c2_bt_sfp: sfp-13 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c2_bt_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 9 GPIO_ACTIVE_LOW>;
};
c2_bb_sfp: sfp-14 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c2_bb_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 10 GPIO_ACTIVE_LOW>;
};
c2_at_sfp: sfp-15 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c2_at_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
};
c2_ab_sfp: sfp-16 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c2_ab_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
};
c3_bt_sfp: sfp-17 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c3_bt_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 13 GPIO_ACTIVE_LOW>;
};
c3_bb_sfp: sfp-18 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c3_bb_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 14 GPIO_ACTIVE_LOW>;
};
c3_at_sfp: sfp-19 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c3_at_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 11 GPIO_ACTIVE_LOW>;
};
c3_ab_sfp: sfp-20 {
compatible = "sff,sfp";
i2c-bus = <&twins_sfp_c3_ab_i2c>;
maximum-power-milliwatt = <2000>;
mod-def0-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
};
};
/*
* This board supports industrial grade temperatures,
* the LX2160A SoC maximum junction temperature is 105°C.
*
* Raise thermal thresholds to allow operation near maximum temperature.
*/
&ccn_dpaa_alert {
temperature = <100000>;
};
&ccn_dpaa_crit {
temperature = <105000>;
};
&cluster2_3_alert {
temperature = <100000>;
};
&cluster2_3_crit {
temperature = <105000>;
};
&cluster4_alert {
temperature = <100000>;
};
&cluster4_crit {
temperature = <105000>;
};
&cluster5_alert {
temperature = <100000>;
};
&cluster5_crit {
temperature = <105000>;
};
&cluster6_7_alert {
temperature = <100000>;
};
&cluster6_7_crit {
temperature = <105000>;
};
&dce_qbman_alert {
temperature = <100000>;
};
&dce_qbman_crit {
temperature = <105000>;
};
/* sfp port 11 */
&dpmac3 {
managed = "in-band-status";
phys = <&serdes_1 7>;
sfp = <&c1_at_sfp>;
};
/* sfp port 9 */
&dpmac4 {
managed = "in-band-status";
phys = <&serdes_1 6>;
sfp = <&c1_bt_sfp>;
};
/* sfp port 1 */
&dpmac5 {
managed = "in-band-status";
phys = <&serdes_1 5>;
sfp = <&ht_c3_bt_sfp>;
};
/* sfp port 3 */
&dpmac6 {
managed = "in-band-status";
phys = <&serdes_1 4>;
sfp = <&ht_c3_at_sfp>;
};
/* sfp port 15 */
&dpmac7 {
managed = "in-band-status";
phys = <&serdes_1 3>;
sfp = <&c2_at_sfp>;
};
/* sfp port 13 */
&dpmac8 {
managed = "in-band-status";
phys = <&serdes_1 2>;
sfp = <&c2_bt_sfp>;
};
/* sfp port 19 */
&dpmac9 {
managed = "in-band-status";
phys = <&serdes_1 1>;
sfp = <&c3_at_sfp>;
};
/* sfp port 17 */
&dpmac10 {
managed = "in-band-status";
phys = <&serdes_1 0>;
sfp = <&c3_bt_sfp>;
};
/* sfp port 4 */
&dpmac11 {
managed = "in-band-status";
phys = <&serdes_2 0>;
sfp = <&ht_c3_ab_sfp>;
};
/* sfp port 12 */
&dpmac12 {
managed = "in-band-status";
phys = <&serdes_2 1>;
sfp = <&c1_ab_sfp>;
};
/* sfp port 20 */
&dpmac13 {
managed = "in-band-status";
phys = <&serdes_2 6>;
sfp = <&c3_ab_sfp>;
};
/* sfp port 18 */
&dpmac14 {
managed = "in-band-status";
phys = <&serdes_2 7>;
sfp = <&c3_bb_sfp>;
};
/* sfp port 2 */
&dpmac15 {
managed = "in-band-status";
phys = <&serdes_2 4>;
sfp = <&ht_c3_bb_sfp>;
};
/* sfp port 14 */
&dpmac16 {
managed = "in-band-status";
phys = <&serdes_2 5>;
sfp = <&c2_bb_sfp>;
};
/* sfp port 10 */
&dpmac17 {
/* override connection to on-COM phy */
/delete-property/ phy-handle;
/delete-property/ phy-connection-type;
managed = "in-band-status";
phys = <&serdes_2 2>;
sfp = <&c1_bb_sfp>;
};
/* sfp port 16 */
&dpmac18 {
managed = "in-band-status";
phys = <&serdes_2 3>;
sfp = <&c2_ab_sfp>;
};
&esdhc0 {
pinctrl-0 = <&esdhc0_cd_wp_pins>, <&esdhc0_cmd_data30_clk_vsel_pins>;
pinctrl-names = "default";
/*
* Disable 1.8V modes so that microsd state is same between
* power-on-reset, u-boot and linux.
* This avoids sporadic read errors after hard reset with some cards.
*/
no-1-8-v;
status = "okay";
};
&i2c2 {
expander0: gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
};
expander1: gpio@21 {
compatible = "nxp,pca9555";
reg = <0x21>;
#gpio-cells = <2>;
gpio-controller;
};
expander2: gpio@24 {
compatible = "nxp,pca9555";
reg = <0x24>;
#gpio-cells = <2>;
gpio-controller;
};
expander3: gpio@25 {
compatible = "nxp,pca9555";
reg = <0x25>;
#gpio-cells = <2>;
gpio-controller;
};
/* Half twins configuration; take over c3 from the other twin side */
i2c-mux@73 {
compatible = "nxp,pca9547";
reg = <0x73>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
htwins_sfp_c3_at_i2c: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
htwins_sfp_c3_ab_i2c: i2c@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
htwins_sfp_c3_bt_i2c: i2c@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
htwins_sfp_c3_bb_i2c: i2c@6 {
reg = <6>;
#address-cells = <1>;
#size-cells = <0>;
};
};
i2c-mux@76 {
compatible = "nxp,pca9547";
reg = <0x76>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
twins_sfp_c1_at_i2c: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c1_ab_i2c: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c1_bt_i2c: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c1_bb_i2c: i2c@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c2_at_i2c: i2c@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c2_ab_i2c: i2c@6 {
reg = <6>;
#address-cells = <1>;
#size-cells = <0>;
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
twins_sfp_c2_bt_i2c: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c2_bb_i2c: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c3_at_i2c: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c3_ab_i2c: i2c@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c3_bt_i2c: i2c@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
twins_sfp_c3_bb_i2c: i2c@6 {
reg = <6>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&pcie5 {
status = "okay";
};
&pcs_mdio3 {
status = "okay";
};
&pcs_mdio4 {
status = "okay";
};
&pcs_mdio5 {
status = "okay";
};
&pcs_mdio6 {
status = "okay";
};
&pcs_mdio7 {
status = "okay";
};
&pcs_mdio8 {
status = "okay";
};
&pcs_mdio9 {
status = "okay";
};
&pcs_mdio10 {
status = "okay";
};
&pcs_mdio11 {
status = "okay";
};
&pcs_mdio12 {
status = "okay";
};
&pcs_mdio13 {
status = "okay";
};
&pcs_mdio14 {
status = "okay";
};
&pcs_mdio15 {
status = "okay";
};
&pcs_mdio16 {
status = "okay";
};
&pcs_mdio17 {
status = "okay";
};
&pcs_mdio18 {
status = "okay";
};
&rgmii_phy1 {
/*
* COM has a phy at address 1 connected to SoC Ethernet Controller 1.
* It competes for WRIOP MAC17, and no connector has been wired.
*/
status = "disabled";
};
&serdes_2 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&wriop_alert {
temperature = <100000>;
};
&wriop_crit {
temperature = <105000>;
};

24
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
View File

@ -499,13 +499,13 @@ ddr-ctrl5-thermal {
thermal-sensors = <&tmu 1>;
trips {
ddr-cluster5-alert {
cluster5_alert: ddr-cluster5-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
ddr-cluster5-crit {
cluster5_crit: ddr-cluster5-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@ -519,13 +519,13 @@ wriop-thermal {
thermal-sensors = <&tmu 2>;
trips {
wriop-alert {
wriop_alert: wriop-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
wriop-crit {
wriop_crit: wriop-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@ -539,13 +539,13 @@ dce-thermal {
thermal-sensors = <&tmu 3>;
trips {
dce-qbman-alert {
dce_qbman_alert: dce-qbman-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
dce-qbman-crit {
dce_qbman_crit: dce-qbman-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@ -559,13 +559,13 @@ ccn-thermal {
thermal-sensors = <&tmu 4>;
trips {
ccn-dpaa-alert {
ccn_dpaa_alert: ccn-dpaa-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
ccn-dpaa-crit {
ccn_dpaa_crit: ccn-dpaa-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@ -579,13 +579,13 @@ cluster4-thermal {
thermal-sensors = <&tmu 5>;
trips {
clust4-hsio3-alert {
cluster4_alert: clust4-hsio3-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
clust4-hsio3-crit {
cluster4_crit: clust4-hsio3-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@ -599,13 +599,13 @@ cluster2-3-thermal {
thermal-sensors = <&tmu 6>;
trips {
cluster2-3-alert {
cluster2_3_alert: cluster2-3-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cluster2-3-crit {
cluster2_3_crit: cluster2-3-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";