From df41d58048a51e0f9c9b7a3710349f23efbfe64b Mon Sep 17 00:00:00 2001 From: Antony Kurniawan Soemardi Date: Sun, 21 Sep 2025 03:08:01 +0000 Subject: [PATCH] ARM: dts: qcom: msm8960: reorder nodes and properties Reorder the nodes in qcom-msm8960.dtsi by unit address and sort properties, as recommended in the Devicetree style guide. This is a cosmetic change only, with no functional impact. Tested-by: Rudraksha Gupta Tested-by: Shinjo Park Signed-off-by: Antony Kurniawan Soemardi Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-1-26c478366d21@smankusors.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 857 ++++++++++++----------- 1 file changed, 436 insertions(+), 421 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 6e272d5345a8..6884f7f5b118 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -15,6 +15,35 @@ / { compatible = "qcom,msm8960"; interrupt-parent = <&intc>; + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = ; + qcom,no-pc-write; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,9 +51,9 @@ cpus { cpu@0 { compatible = "qcom,krait"; + reg = <0>; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; - reg = <0>; next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -32,9 +61,9 @@ cpu@0 { cpu@1 { compatible = "qcom,krait"; + reg = <1>; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; - reg = <1>; next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -52,6 +81,411 @@ memory@80000000 { reg = <0x80000000 0>; }; + soc: soc { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + rpm: rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = , + , + ; + interrupt-names = "ack", + "err", + "wakeup"; + }; + + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + qfprom: efuse@700000 { + compatible = "qcom,msm8960-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_calib: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_backup: backup-calib@414 { + reg = <0x414 0x10>; + }; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960", "syscon"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", + "pxo", + "pll4"; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = ; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", + "qcom,msm-timer"; + reg = <0x0200a000 0x100>; + interrupts = , + , + ; + clock-frequency = <27000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; + }; + + saw0: power-manager@2089000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + + saw0_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + + saw1: power-manager@2099000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + + saw1_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; + }; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x12180000 0x2000>; + arm,primecell-periphid = <0x00051180>; + interrupts = ; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x4000>; + interrupts = ; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1: mmc@12400000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x12400000 0x2000>; + arm,primecell-periphid = <0x00051180>; + interrupts = ; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x4000>; + interrupts = ; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = ; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + #reset-cells = <1>; + + status = "disabled"; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-msm8960", + "qcom,usb-hs-phy"; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + #phy-cells = <0>; + }; + }; + }; + + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16000000 0x100>; + ranges; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + cs-gpios = <&msmgpio 8 0>; + clocks = <&gcc GSBI1_QUP_CLK>, + <&gcc GSBI1_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + ranges; + cell-index = <3>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = ; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", + "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16400000 0x100>; + ranges; + cell-index = <5>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI5_UART_CLK>, + <&gcc GSBI5_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + + gsbi8: gsbi@1a000000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a000000 0x100>; + ranges; + cell-index = <8>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi8_serial: serial@1a040000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a040000 0x1000>, + <0x1a000000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI8_UART_CLK>, + <&gcc GSBI8_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + }; + thermal-zones { cpu0-thermal { polling-delay-passive = <250>; @@ -94,35 +528,6 @@ cpu_crit1: trip1 { }; }; - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = ; - qcom,no-pc-write; - }; - - clocks { - cxo_board: cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "cxo_board"; - }; - - pxo_board: pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - clock-output-names = "pxo_board"; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "sleep_clk"; - }; - }; - /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; @@ -131,395 +536,5 @@ vsdcc_fixed: vsdcc-regulator { regulator-max-microvolt = <2700000>; regulator-always-on; }; - - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "simple-bus"; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x02000000 0x1000>, - <0x02002000 0x1000>; - }; - - timer@200a000 { - compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", - "qcom,msm-timer"; - interrupts = , - , - ; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>; - clocks = <&sleep_clk>; - clock-names = "sleep"; - cpu-offset = <0x80000>; - }; - - qfprom: efuse@700000 { - compatible = "qcom,msm8960-qfprom", "qcom,qfprom"; - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - tsens_calib: calib@404 { - reg = <0x404 0x10>; - }; - - tsens_backup: backup-calib@414 { - reg = <0x414 0x10>; - }; - }; - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8960-pinctrl"; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 152>; - #gpio-cells = <2>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960", "syscon"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - clocks = <&cxo_board>, - <&pxo_board>, - <&lcc PLL4>; - clock-names = "cxo", "pxo", "pll4"; - - tsens: thermal-sensor { - compatible = "qcom,msm8960-tsens"; - - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = ; - interrupt-names = "uplow"; - - #qcom,sensors = <5>; - #thermal-sensor-cells = <1>; - }; - }; - - lcc: clock-controller@28000000 { - compatible = "qcom,lcc-msm8960"; - reg = <0x28000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&pxo_board>, - <&gcc PLL4_VOTE>, - <0>, - <0>, <0>, - <0>, <0>, - <0>; - clock-names = "pxo", - "pll4_vote", - "mi2s_codec_clk", - "codec_i2s_mic_codec_clk", - "spare_i2s_mic_codec_clk", - "codec_i2s_spkr_codec_clk", - "spare_i2s_spkr_codec_clk", - "pcm_codec_clk"; - }; - - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - clocks = <&pxo_board>, - <&gcc PLL3>, - <&gcc PLL8_VOTE>, - <0>, - <0>, - <0>, - <0>, - <0>; - clock-names = "pxo", - "pll3", - "pll8_vote", - "dsi1pll", - "dsi1pllbyte", - "dsi2pll", - "dsi2pllbyte", - "hdmipll"; - }; - - l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - #clock-cells = <0>; - }; - - rpm: rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; - }; - - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu0_aux"; - #clock-cells = <0>; - }; - - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu1_aux"; - #clock-cells = <0>; - }; - - saw0: power-manager@2089000 { - compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - - saw0_vreg: regulator { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - }; - }; - - saw1: power-manager@2099000 { - compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - - saw1_vreg: regulator { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - }; - }; - - gsbi5: gsbi@16400000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <5>; - reg = <0x16400000 0x100>; - clocks = <&gcc GSBI5_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon-tcsr = <&tcsr>; - - status = "disabled"; - - gsbi5_serial: serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = ; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - }; - - gsbi8: gsbi@1a000000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <8>; - reg = <0x1a000000 0x100>; - clocks = <&gcc GSBI8_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon-tcsr = <&tcsr>; - - status = "disabled"; - - gsbi8_serial: serial@1a040000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a040000 0x1000>, - <0x1a000000 0x1000>; - interrupts = ; - clocks = <&gcc GSBI8_UART_CLK>, - <&gcc GSBI8_H_CLK>; - clock-names = "core", - "iface"; - - status = "disabled"; - }; - }; - - ssbi: ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; - - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; - }; - - sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = ; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc3bam: dma-controller@12182000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12182000 0x4000>; - interrupts = ; - clocks = <&gcc SDC3_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = ; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc1bam: dma-controller@12402000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12402000 0x4000>; - interrupts = ; - clocks = <&gcc SDC1_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-msm8960", "syscon"; - reg = <0x1a400000 0x100>; - }; - - gsbi1: gsbi@16000000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <1>; - reg = <0x16000000 0x100>; - clocks = <&gcc GSBI1_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - status = "disabled"; - - gsbi1_spi: spi@16080000 { - compatible = "qcom,spi-qup-v1.1.1"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x16080000 0x1000>; - interrupts = ; - cs-gpios = <&msmgpio 8 0>; - - clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - }; - - usb1: usb@12500000 { - compatible = "qcom,ci-hdrc"; - reg = <0x12500000 0x200>, - <0x12500200 0x200>; - interrupts = ; - clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; - clock-names = "core", "iface"; - assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; - assigned-clock-rates = <60000000>; - resets = <&gcc USB_HS1_RESET>; - reset-names = "core"; - phy_type = "ulpi"; - ahb-burst-config = <0>; - phys = <&usb_hs1_phy>; - phy-names = "usb-phy"; - #reset-cells = <1>; - status = "disabled"; - - ulpi { - usb_hs1_phy: phy { - compatible = "qcom,usb-hs-phy-msm8960", - "qcom,usb-hs-phy"; - clocks = <&sleep_clk>, <&cxo_board>; - clock-names = "sleep", "ref"; - resets = <&usb1 0>; - reset-names = "por"; - #phy-cells = <0>; - }; - }; - }; - - gsbi3: gsbi@16200000 { - compatible = "qcom,gsbi-v1.0.0"; - reg = <0x16200000 0x100>; - ranges; - cell-index = <3>; - clocks = <&gcc GSBI3_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - - gsbi3_i2c: i2c@16280000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16280000 0x1000>; - pinctrl-0 = <&i2c3_default_state>; - pinctrl-1 = <&i2c3_sleep_state>; - pinctrl-names = "default", "sleep"; - interrupts = ; - clocks = <&gcc GSBI3_QUP_CLK>, - <&gcc GSBI3_H_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - }; }; #include "qcom-msm8960-pins.dtsi"