hwmon: (pmbus/tps53679) Add support for TPS53622 and TPS53659

TPS53622 and TPS53659 are dual-channel D-CAP+ step-down controllers that
use the VID VOUT format and VOUT_MODE identification like the existing
TPS53679/TPS53688, so they reuse tps53679_identify().

Shorten the Kconfig prompt to the family name and list the supported
chips in the help text instead; this also adds TPS53685, which is already
supported by the driver but was missing from the list. Update the driver
documentation, including the per-attribute lists, and fix an existing
"TPS53588" typo (should be TPS53688) in those lists.

Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://patch.msgid.link/20260901211129.360792-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/tps53679.rst

@@ -3,6 +3,14 @@ Kernel driver tps53679
 
 Supported chips:
 
+  * Texas Instruments TPS53622
+
+    Prefix: 'tps53622'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.ti.com/lit/gpn/TPS53622
+
   * Texas Instruments TPS53647
 
     Prefix: 'tps53647'
@@ -11,6 +19,14 @@ Supported chips:
 
     Datasheet: https://www.ti.com/lit/gpn/tps53647
 
+  * Texas Instruments TPS53659
+
+    Prefix: 'tps53659'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.ti.com/lit/gpn/TPS53659
+
   * Texas Instruments TPS53667
 
     Prefix: 'tps53667'
@@ -108,7 +124,7 @@ in1_crit_alarm		Input voltage critical high alarm.
 in[N]_label		"vout[1-2]"
 
 			- TPS53647, TPS53667: N=2
-			- TPS53679, TPS53588: N=2,3
+			- TPS53622, TPS53659, TPS53679, TPS53688: N=2,3
 
 in[N]_input		Measured output voltage.
 
@@ -135,7 +151,7 @@ in[N]_crit_alarm	Output voltage critical high alarm.
 temp[N]_input		Measured temperature.
 
 			- TPS53647, TPS53667: N=1
-			- TPS53679, TPS53681, TPS53588: N=1,2
+			- TPS53622, TPS53659, TPS53679, TPS53681, TPS53688: N=1,2
 
 temp[N]_max		Maximum temperature.
 
@@ -152,7 +168,7 @@ power1_input		Measured input power.
 power[N]_label		"pout[1-2]".
 
 			- TPS53647, TPS53667: N=2
-			- TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
+			- TPS53622, TPS53659, TPS53676, TPS53679, TPS53681, TPS53688: N=2,3
 
 power[N]_input		Measured output power.
 
@@ -175,7 +191,7 @@ curr[N]_label		"iout[1-2]" or "iout1.[0-5]".
 			telemetry supported on TPS53676 and TPS53681 only.
 
 			- TPS53647, TPS53667: N=2
-			- TPS53679, TPS53588: N=2,3
+			- TPS53622, TPS53659, TPS53679, TPS53688: N=2,3
 			- TPS53676: N=2-8
 			- TPS53681: N=2-9
 

drivers/hwmon/pmbus/Kconfig

@@ -790,10 +790,11 @@ config SENSORS_TPS40422
 	  be called tps40422.
 
 config SENSORS_TPS53679
-	tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
+	tristate "TI TPS536xx family"
 	help
 	  If you say yes here you get hardware monitoring support for TI
-	  TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
+	  TPS53622, TPS53647, TPS53659, TPS53667, TPS53676, TPS53679, TPS53681,
+	  TPS53685, and TPS53688.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.

drivers/hwmon/pmbus/tps53679.c

@@ -16,7 +16,8 @@
 #include "pmbus.h"
 
 enum chips {
-	tps53647, tps53667, tps53676, tps53679, tps53681, tps53685, tps53688
+	tps53622, tps53647, tps53659, tps53667, tps53676, tps53679, tps53681,
+	tps53685, tps53688
 };
 
 #define TPS53647_PAGE_NUM		1
@@ -277,6 +278,8 @@ static int tps53679_probe(struct i2c_client *client)
 	case tps53676:
 		info->identify = tps53676_identify;
 		break;
+	case tps53622:
+	case tps53659:
 	case tps53679:
 	case tps53688:
 		info->pages = TPS53679_PAGE_NUM;
@@ -301,7 +304,9 @@ static int tps53679_probe(struct i2c_client *client)
 
 static const struct i2c_device_id tps53679_id[] = {
 	{ .name = "bmr474", .driver_data = tps53676 },
+	{ .name = "tps53622", .driver_data = tps53622 },
 	{ .name = "tps53647", .driver_data = tps53647 },
+	{ .name = "tps53659", .driver_data = tps53659 },
 	{ .name = "tps53667", .driver_data = tps53667 },
 	{ .name = "tps53676", .driver_data = tps53676 },
 	{ .name = "tps53679", .driver_data = tps53679 },
@@ -314,7 +319,9 @@ static const struct i2c_device_id tps53679_id[] = {
 MODULE_DEVICE_TABLE(i2c, tps53679_id);
 
 static const struct of_device_id __maybe_unused tps53679_of_match[] = {
+	{.compatible = "ti,tps53622", .data = (void *)tps53622},
 	{.compatible = "ti,tps53647", .data = (void *)tps53647},
+	{.compatible = "ti,tps53659", .data = (void *)tps53659},
 	{.compatible = "ti,tps53667", .data = (void *)tps53667},
 	{.compatible = "ti,tps53676", .data = (void *)tps53676},
 	{.compatible = "ti,tps53679", .data = (void *)tps53679},