dmaengine: dw-edma: Add virtual IRQ for interrupt-emulation doorbells

Interrupt emulation can assert the dw-edma IRQ line without updating the
DONE/ABORT bits. With the shared read/write/common IRQ handlers, the
driver cannot reliably distinguish such an emulated interrupt from a
real one and leaving a level IRQ asserted may wedge the line.

Allocate a dedicated, requestable Linux virtual IRQ (db_irq) for
interrupt emulation and attach an irq_chip whose .irq_ack runs the
core-specific deassert sequence (.ack_emulated_irq()). The physical
dw-edma interrupt handlers raise this virtual IRQ via
generic_handle_irq(), ensuring emulated IRQs are always deasserted.

Export the virtual IRQ number (db_irq) and the doorbell register offset
(db_offset) via struct dw_edma_chip so platform users can expose
interrupt emulation as a doorbell.

Without this, a single interrupt-emulation write can leave the level IRQ
line asserted and cause the generic IRQ layer to disable it.

Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260215152216.3393561-3-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/dw-edma/dw-edma-core.c

@@ -663,7 +663,96 @@ static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
 	chan->status = EDMA_ST_IDLE;
 }
 
-static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
+static void dw_edma_emul_irq_ack(struct irq_data *d)
+{
+	struct dw_edma *dw = irq_data_get_irq_chip_data(d);
+
+	dw_edma_core_ack_emulated_irq(dw);
+}
+
+/*
+ * irq_chip implementation for interrupt-emulation doorbells.
+ *
+ * The emulated source has no mask/unmask mechanism. With handle_level_irq(),
+ * the flow is therefore:
+ *   1) .irq_ack() deasserts the source
+ *   2) registered handlers (if any) are dispatched
+ * Since deassertion is already done in .irq_ack(), handlers do not need to take
+ * care of it, hence IRQCHIP_ONESHOT_SAFE.
+ */
+static struct irq_chip dw_edma_emul_irqchip = {
+	.name		= "dw-edma-emul",
+	.irq_ack	= dw_edma_emul_irq_ack,
+	.flags		= IRQCHIP_ONESHOT_SAFE | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int dw_edma_emul_irq_alloc(struct dw_edma *dw)
+{
+	struct dw_edma_chip *chip = dw->chip;
+	int virq;
+
+	chip->db_irq = 0;
+	chip->db_offset = ~0;
+
+	/*
+	 * Only meaningful when the core provides the deassert sequence
+	 * for interrupt emulation.
+	 */
+	if (!dw->core->ack_emulated_irq)
+		return 0;
+
+	/*
+	 * Allocate a single, requestable Linux virtual IRQ number.
+	 * Use >= 1 so that 0 can remain a "not available" sentinel.
+	 */
+	virq = irq_alloc_desc(NUMA_NO_NODE);
+	if (virq < 0)
+		return virq;
+
+	irq_set_chip_and_handler(virq, &dw_edma_emul_irqchip, handle_level_irq);
+	irq_set_chip_data(virq, dw);
+	irq_set_noprobe(virq);
+
+	chip->db_irq = virq;
+	chip->db_offset = dw_edma_core_db_offset(dw);
+
+	return 0;
+}
+
+static void dw_edma_emul_irq_free(struct dw_edma *dw)
+{
+	struct dw_edma_chip *chip = dw->chip;
+
+	if (!chip)
+		return;
+	if (chip->db_irq <= 0)
+		return;
+
+	irq_free_descs(chip->db_irq, 1);
+	chip->db_irq = 0;
+	chip->db_offset = ~0;
+}
+
+static inline irqreturn_t dw_edma_interrupt_emulated(void *data)
+{
+	struct dw_edma_irq *dw_irq = data;
+	struct dw_edma *dw = dw_irq->dw;
+	int db_irq = dw->chip->db_irq;
+
+	if (db_irq > 0) {
+		/*
+		 * Interrupt emulation may assert the IRQ line without updating the
+		 * normal DONE/ABORT status bits. With a shared IRQ handler we
+		 * cannot reliably detect such events by status registers alone, so
+		 * always perform the core-specific deassert sequence.
+		 */
+		generic_handle_irq(db_irq);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static inline irqreturn_t dw_edma_interrupt_write_inner(int irq, void *data)
 {
 	struct dw_edma_irq *dw_irq = data;
 
@@ -672,7 +761,7 @@ static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
 				       dw_edma_abort_interrupt);
 }
 
-static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
+static inline irqreturn_t dw_edma_interrupt_read_inner(int irq, void *data)
 {
 	struct dw_edma_irq *dw_irq = data;
 
@@ -681,12 +770,33 @@ static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
 				       dw_edma_abort_interrupt);
 }
 
-static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
+static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
 {
 	irqreturn_t ret = IRQ_NONE;
 
-	ret |= dw_edma_interrupt_write(irq, data);
+	ret |= dw_edma_interrupt_write_inner(irq, data);
-	ret |= dw_edma_interrupt_read(irq, data);
+	ret |= dw_edma_interrupt_emulated(data);
+
+	return ret;
+}
+
+static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+
+	ret |= dw_edma_interrupt_read_inner(irq, data);
+	ret |= dw_edma_interrupt_emulated(data);
+
+	return ret;
+}
+
+static inline irqreturn_t dw_edma_interrupt_common(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+
+	ret |= dw_edma_interrupt_write_inner(irq, data);
+	ret |= dw_edma_interrupt_read_inner(irq, data);
+	ret |= dw_edma_interrupt_emulated(data);
 
 	return ret;
 }
@@ -973,6 +1083,11 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 	if (err)
 		return err;
 
+	/* Allocate a dedicated virtual IRQ for interrupt-emulation doorbells */
+	err = dw_edma_emul_irq_alloc(dw);
+	if (err)
+		dev_warn(dev, "Failed to allocate emulation IRQ: %d\n", err);
+
 	/* Setup write/read channels */
 	err = dw_edma_channel_setup(dw, wr_alloc, rd_alloc);
 	if (err)
@@ -988,6 +1103,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 err_irq_free:
 	for (i = (dw->nr_irqs - 1); i >= 0; i--)
 		free_irq(chip->ops->irq_vector(dev, i), &dw->irq[i]);
+	dw_edma_emul_irq_free(dw);
 
 	return err;
 }
@@ -1010,6 +1126,7 @@ int dw_edma_remove(struct dw_edma_chip *chip)
 	/* Free irqs */
 	for (i = (dw->nr_irqs - 1); i >= 0; i--)
 		free_irq(chip->ops->irq_vector(dev, i), &dw->irq[i]);
+	dw_edma_emul_irq_free(dw);
 
 	/* Deregister eDMA device */
 	dma_async_device_unregister(&dw->dma);

include/linux/dma/edma.h

@@ -73,6 +73,8 @@ enum dw_edma_chip_flags {
  * @ll_region_rd:	 DMA descriptor link list memory for read channel
  * @dt_region_wr:	 DMA data memory for write channel
  * @dt_region_rd:	 DMA data memory for read channel
+ * @db_irq:		 Virtual IRQ dedicated to interrupt emulation
+ * @db_offset:		 Offset from DMA register base
  * @mf:			 DMA register map format
  * @dw:			 struct dw_edma that is filled by dw_edma_probe()
  */
@@ -94,6 +96,10 @@ struct dw_edma_chip {
 	struct dw_edma_region	dt_region_wr[EDMA_MAX_WR_CH];
 	struct dw_edma_region	dt_region_rd[EDMA_MAX_RD_CH];
 
+	/* interrupt emulation */
+	int			db_irq;
+	resource_size_t		db_offset;
+
 	enum dw_edma_map_format	mf;
 
 	struct dw_edma		*dw;