diff --git a/MAINTAINERS b/MAINTAINERS
index 5b11839cba9d..c4bc270679a5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8201,6 +8201,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/sitronix,st7567.yaml
 F:	Documentation/devicetree/bindings/display/sitronix,st7571.yaml
 F:	drivers/gpu/drm/sitronix/st7571-i2c.c
+F:	drivers/gpu/drm/sitronix/st7571.h
 
 DRM DRIVER FOR SITRONIX ST7701 PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
diff --git a/drivers/gpu/drm/sitronix/st7571-i2c.c b/drivers/gpu/drm/sitronix/st7571-i2c.c
index 2b52919d7dd4..af27658a5e15 100644
--- a/drivers/gpu/drm/sitronix/st7571-i2c.c
+++ b/drivers/gpu/drm/sitronix/st7571-i2c.c
@@ -35,6 +35,8 @@
 #include <video/display_timing.h>
 #include <video/of_display_timing.h>
 
+#include "st7571.h"
+
 #define ST7571_COMMAND_MODE			(0x00)
 #define ST7571_DATA_MODE			(0x40)
 
@@ -78,95 +80,6 @@
 #define DRIVER_MAJOR 1
 #define DRIVER_MINOR 0
 
-enum st7571_color_mode {
-	ST7571_COLOR_MODE_GRAY = 0,
-	ST7571_COLOR_MODE_BLACKWHITE = 1,
-};
-
-struct st7571_device;
-
-struct st7571_panel_constraints {
-	u32 min_nlines;
-	u32 max_nlines;
-	u32 min_ncols;
-	u32 max_ncols;
-	bool support_grayscale;
-};
-
-struct st7571_panel_data {
-	int (*init)(struct st7571_device *st7571);
-	int (*parse_dt)(struct st7571_device *st7571);
-	struct st7571_panel_constraints constraints;
-};
-
-struct st7571_panel_format {
-	void (*prepare_buffer)(struct st7571_device *st7571,
-			       const struct iosys_map *vmap,
-			       struct drm_framebuffer *fb,
-			       struct drm_rect *rect,
-			       struct drm_format_conv_state *fmtcnv_state);
-	int (*update_rect)(struct drm_framebuffer *fb, struct drm_rect *rect);
-	enum st7571_color_mode mode;
-	const u8 nformats;
-	const u32 formats[];
-};
-
-struct st7571_device {
-	struct drm_device drm;
-	struct device *dev;
-
-	struct drm_plane primary_plane;
-	struct drm_crtc crtc;
-	struct drm_encoder encoder;
-	struct drm_connector connector;
-
-	struct drm_display_mode mode;
-
-	const struct st7571_panel_format *pformat;
-	const struct st7571_panel_data *pdata;
-	struct i2c_client *client;
-	struct gpio_desc *reset;
-	struct regmap *regmap;
-
-	/*
-	 * Depending on the hardware design, the acknowledge signal may be hard to
-	 * recognize as a valid logic "0" level.
-	 * Therefor, ignore NAK if possible to stay compatible with most hardware designs
-	 * and off-the-shelf panels out there.
-	 *
-	 * From section 6.4 MICROPOCESSOR INTERFACE section in the datasheet:
-	 *
-	 * "By connecting SDA_OUT to SDA_IN externally, the SDA line becomes fully
-	 * I2C interface compatible.
-	 * Separating acknowledge-output from serial data
-	 * input is advantageous for chip-on-glass (COG) applications. In COG
-	 * applications, the ITO resistance and the pull-up resistor will form a
-	 * voltage  divider, which affects acknowledge-signal level. Larger ITO
-	 * resistance will raise the acknowledged-signal level and system cannot
-	 * recognize this level as a valid logic “0” level. By separating SDA_IN from
-	 * SDA_OUT, the IC can be used in a mode that ignores the acknowledge-bit.
-	 * For applications which check acknowledge-bit, it is necessary to minimize
-	 * the ITO resistance of the SDA_OUT trace to guarantee a valid low level."
-	 *
-	 */
-	bool ignore_nak;
-
-	bool grayscale;
-	bool inverted;
-	u32 height_mm;
-	u32 width_mm;
-	u32 startline;
-	u32 nlines;
-	u32 ncols;
-	u32 bpp;
-
-	/* Intermediate buffer in LCD friendly format */
-	u8 *hwbuf;
-
-	/* Row of (transformed) pixels ready to be written to the display */
-	u8 *row;
-};
-
 static inline struct st7571_device *drm_to_st7571(struct drm_device *drm)
 {
 	return container_of(drm, struct st7571_device, drm);
diff --git a/drivers/gpu/drm/sitronix/st7571.h b/drivers/gpu/drm/sitronix/st7571.h
new file mode 100644
index 000000000000..c6fd6f1d3aa3
--- /dev/null
+++ b/drivers/gpu/drm/sitronix/st7571.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Header file for:
+ * Driver for Sitronix ST7571, a 4 level gray scale dot matrix LCD controller
+ *
+ * Copyright (C) 2025 Marcus Folkesson <marcus.folkesson@gmail.com>
+ */
+
+#ifndef __ST7571_H__
+#define __ST7571_H__
+
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_encoder.h>
+
+#include <linux/regmap.h>
+
+enum st7571_color_mode {
+	ST7571_COLOR_MODE_GRAY = 0,
+	ST7571_COLOR_MODE_BLACKWHITE = 1,
+};
+
+struct st7571_device;
+
+struct st7571_panel_constraints {
+	u32 min_nlines;
+	u32 max_nlines;
+	u32 min_ncols;
+	u32 max_ncols;
+	bool support_grayscale;
+};
+
+struct st7571_panel_data {
+	int (*init)(struct st7571_device *st7571);
+	int (*parse_dt)(struct st7571_device *st7571);
+	struct st7571_panel_constraints constraints;
+};
+
+struct st7571_panel_format {
+	void (*prepare_buffer)(struct st7571_device *st7571,
+			       const struct iosys_map *vmap,
+			       struct drm_framebuffer *fb,
+			       struct drm_rect *rect,
+			       struct drm_format_conv_state *fmtcnv_state);
+	int (*update_rect)(struct drm_framebuffer *fb, struct drm_rect *rect);
+	enum st7571_color_mode mode;
+	const u8 nformats;
+	const u32 formats[];
+};
+
+struct st7571_device {
+	struct drm_device drm;
+	struct device *dev;
+
+	struct drm_plane primary_plane;
+	struct drm_crtc crtc;
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+
+	struct drm_display_mode mode;
+
+	const struct st7571_panel_format *pformat;
+	const struct st7571_panel_data *pdata;
+	struct i2c_client *client;
+	struct gpio_desc *reset;
+	struct regmap *regmap;
+
+	/*
+	 * Depending on the hardware design, the acknowledge signal may be hard to
+	 * recognize as a valid logic "0" level.
+	 * Therefor, ignore NAK if possible to stay compatible with most hardware designs
+	 * and off-the-shelf panels out there.
+	 *
+	 * From section 6.4 MICROPOCESSOR INTERFACE section in the datasheet:
+	 *
+	 * "By connecting SDA_OUT to SDA_IN externally, the SDA line becomes fully
+	 * I2C interface compatible.
+	 * Separating acknowledge-output from serial data
+	 * input is advantageous for chip-on-glass (COG) applications. In COG
+	 * applications, the ITO resistance and the pull-up resistor will form a
+	 * voltage  divider, which affects acknowledge-signal level. Larger ITO
+	 * resistance will raise the acknowledged-signal level and system cannot
+	 * recognize this level as a valid logic “0” level. By separating SDA_IN from
+	 * SDA_OUT, the IC can be used in a mode that ignores the acknowledge-bit.
+	 * For applications which check acknowledge-bit, it is necessary to minimize
+	 * the ITO resistance of the SDA_OUT trace to guarantee a valid low level."
+	 *
+	 */
+	bool ignore_nak;
+
+	bool grayscale;
+	bool inverted;
+	u32 height_mm;
+	u32 width_mm;
+	u32 startline;
+	u32 nlines;
+	u32 ncols;
+	u32 bpp;
+
+	/* Intermediate buffer in LCD friendly format */
+	u8 *hwbuf;
+
+	/* Row of (transformed) pixels ready to be written to the display */
+	u8 *row;
+};
+
+#endif /* __ST7571_H__ */