diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index e500ec84e3ef..689eccf6a592 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -2407,6 +2407,12 @@ quirk_flags
           the requested rate.  A device advertising a single rate is otherwise
           never sent the request at all, and some require it before streaming
           will start.
+        * bit 33: ``swap_rates``
+          The clock source applies a requested rate to the other base-rate
+          family, i.e. asking for 44100 makes the device run at 48000 and vice
+          versa (same for 88200 <-> 96000 and 176400 <-> 192000).  The driver
+          sends the partner rate in SET_CUR so the device ends up running at the
+          requested one.
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 34832183a1f0..cc77eace7b59 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -549,6 +549,30 @@ static int get_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
 	return le32_to_cpu(data);
 }
 
+/*
+ * Return the partner rate in the other base-rate family.
+ * See QUIRK_FLAG_SWAP_RATES.
+ */
+static unsigned int swap_base_rate(unsigned int rate)
+{
+	switch (rate) {
+	case 44100:
+		return 48000;
+	case 48000:
+		return 44100;
+	case 88200:
+		return 96000;
+	case 96000:
+		return 88200;
+	case 176400:
+		return 192000;
+	case 192000:
+		return 176400;
+	default:
+		return rate;
+	}
+}
+
 /*
  * Try to set the given sample rate:
  *
@@ -585,6 +609,9 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip,
 	if (!writeable)
 		return 0;
 
+	if (chip->quirk_flags & QUIRK_FLAG_SWAP_RATES)
+		rate = swap_base_rate(rate);
+
 	data = cpu_to_le32(rate);
 	err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 20140cf7f4aa..1c248075c48e 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -2776,6 +2776,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_MIC_RES_16),
 	DEVICE_FLG(0x36f9, 0xc009, /* XIBERIA K03S */
 		   QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY),
+	DEVICE_FLG(0x3703, 0x2000, /* NUX NAI-24 */
+		   QUIRK_FLAG_SWAP_RATES),
 	DEVICE_FLG(0x3c20, 0x3d21, /* AB13X USB Audio */
 		   QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY),
 	DEVICE_FLG(0x413c, 0xa506, /* Dell AE515 sound bar */
@@ -2901,6 +2903,7 @@ static const char *const snd_usb_audio_quirk_flag_names[] = {
 	QUIRK_STRING_ENTRY(MIXER_GET_CUR_OK),
 	QUIRK_STRING_ENTRY(PLAYBACK_URB_FIXUP),
 	QUIRK_STRING_ENTRY(ALWAYS_SET_RATE),
+	QUIRK_STRING_ENTRY(SWAP_RATES),
 	NULL
 };
 
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 24436473931d..c6d59218d35f 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -258,6 +258,10 @@ extern bool snd_usb_skip_validation;
  *  Issue SET_CUR for the sample rate even when the clock already reports the
  *  requested rate.  A device advertising a single rate is otherwise never sent
  *  the request at all, and some require it before streaming will start.
+ * QUIRK_FLAG_SWAP_RATES
+ *  The device applies a requested sample rate to the other base-rate family
+ *  (44100 <-> 48000, 88200 <-> 96000, 176400 <-> 192000).  Send the partner
+ *  rate in SET_CUR so that the device runs at the requested rate.
  */
 
 enum {
@@ -294,6 +298,7 @@ enum {
 	QUIRK_TYPE_MIXER_GET_CUR_OK		= 30,
 	QUIRK_TYPE_PLAYBACK_URB_FIXUP		= 31,
 	QUIRK_TYPE_ALWAYS_SET_RATE		= 32,
+	QUIRK_TYPE_SWAP_RATES			= 33,
 /* Please also edit snd_usb_audio_quirk_flag_names and alsa-configuration.rst */
 };
 
@@ -332,5 +337,6 @@ enum {
 #define QUIRK_FLAG_MIXER_GET_CUR_OK		QUIRK_FLAG(MIXER_GET_CUR_OK)
 #define QUIRK_FLAG_PLAYBACK_URB_FIXUP		QUIRK_FLAG(PLAYBACK_URB_FIXUP)
 #define QUIRK_FLAG_ALWAYS_SET_RATE		QUIRK_FLAG(ALWAYS_SET_RATE)
+#define QUIRK_FLAG_SWAP_RATES			QUIRK_FLAG(SWAP_RATES)
 
 #endif /* __USBAUDIO_H */