diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 36f4c997b0b3..1df078d7d89b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -19,7 +19,7 @@ chosen {
 	ext_l2: gpio-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ext_l2";
-		gpio = <&msmgpio 91 0>;
+		gpio = <&tlmm 91 0>;
 		startup-delay-us = <10000>;
 		enable-active-high;
 	};
@@ -38,12 +38,12 @@ &gsbi1_spi {
 	ethernet@0 {
 		compatible = "micrel,ks8851";
 		reg = <0>;
-		interrupt-parent = <&msmgpio>;
+		interrupt-parent = <&tlmm>;
 		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <5400000>;
 		vdd-supply = <&ext_l2>;
 		vdd-io-supply = <&pm8921_lvs6>;
-		reset-gpios = <&msmgpio 89 0>;
+		reset-gpios = <&tlmm 89 0>;
 	};
 };
 
@@ -56,7 +56,7 @@ &gsbi5_serial {
 	status = "okay";
 };
 
-&msmgpio {
+&tlmm {
 	spi1_default: spi1-default-state {
 		 mosi-pins {
 			pins = "gpio6";
@@ -90,7 +90,7 @@ clk-pins {
 };
 
 &pm8921 {
-	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &pm8921_keypad {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 49d117ea033a..5ee919dce75b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -31,7 +31,7 @@ gpio-keys {
 
 		key-home {
 			label = "Home";
-			gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_HOMEPAGE>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
@@ -40,14 +40,14 @@ key-home {
 
 		key-volume-up {
 			label = "Volume Up";
-			gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		key-volume-down {
 			label = "Volume Down";
-			gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
@@ -102,7 +102,7 @@ &gsbi3_i2c {
 	touchscreen@4a {
 		compatible = "atmel,maxtouch";
 		reg = <0x4a>;
-		interrupt-parent = <&msmgpio>;
+		interrupt-parent = <&tlmm>;
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		vdda-supply = <&pm8921_lvs6>;
 		vdd-supply = <&pm8921_l17>;
@@ -111,7 +111,7 @@ touchscreen@4a {
 	};
 };
 
-&msmgpio {
+&tlmm {
 	spi1_default: spi1-default-state {
 		mosi-pins {
 			pins = "gpio6";
@@ -160,7 +160,7 @@ touchscreen: touchscreen-int-state {
 };
 
 &pm8921 {
-	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
index f2f59fc8b9b6..591dc837e600 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -54,7 +54,7 @@ &gsbi8_serial {
 };
 
 &pm8921 {
-	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &pm8921_gpio {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 0aaf60dcda64..38bd4fd8dda5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -121,11 +121,11 @@ tsens_backup: backup-calib@414 {
 			};
 		};
 
-		msmgpio: pinctrl@800000 {
+		tlmm: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
 			reg = <0x800000 0x4000>;
 			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 152>;
+			gpio-ranges = <&tlmm 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
@@ -533,7 +533,7 @@ gsbi1_spi: spi@16080000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				cs-gpios = <&msmgpio 8 0>;
+				cs-gpios = <&tlmm 8 0>;
 				clocks = <&gcc GSBI1_QUP_CLK>,
 					 <&gcc GSBI1_H_CLK>;
 				clock-names = "core",