From 29fd3d7f8317d738b340ca7f5144bf915243cdea Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Thu, 30 Jan 2025 16:14:25 +0100 Subject: [PATCH 01/89] arm64: dts: rockchip: add support for sound output over HDMI on RK3399 Puma Haikou The Haikou carrierboard exposes an HDMI connector and audio can also be output, therefore let's enable it on RK3399 Puma. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250130-rk3399-hdmi-audio-v1-1-406244333111@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 947bbd62a6b0..a60779bbbaaa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -154,6 +154,10 @@ &hdmi { status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -191,6 +195,10 @@ &i2c6 { clock-frequency = <400000>; }; +&i2s2 { + status = "okay"; +}; + &pcie_phy { status = "okay"; }; From 0cd57b5e5dde94129a13f6d2897cdb82f8943f9f Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Wed, 29 Jan 2025 06:40:04 +0000 Subject: [PATCH 02/89] arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E The Radxa ROCK Pi E has USB D+/D- signals on the 40-pin header[1]. Enable it for use as an OTG port. [1] https://docs.radxa.com/en/rockpi/rockpie/hardware/gpio Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20250129064004.162136-1-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts index 6310b58de77f..a4bdd87d0729 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -428,10 +428,18 @@ &u2phy_host { status = "okay"; }; +&u2phy_otg { + status = "okay"; +}; + &uart2 { status = "okay"; }; +&usb20_otg { + status = "okay"; +}; + &usbdrd3 { dr_mode = "host"; status = "okay"; From 6ed35e6ff556626734c400fff5a636b38b91fe19 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Mon, 20 Jan 2025 23:22:46 +0400 Subject: [PATCH 03/89] arm64: dts: rockchip: Add finer-grained PWM states for the fan on Rock 5C Radxa Heatsink 6540B, which is the official cooling accessory for the Rock 5C board, includes a small 5V fan, which in my testing spins up reliably at a PWM setting of 24 (out of 255). It is also quite loud at the current minimum setting of 64, and noticeably less so at 24. Introduce two intermediate PWM states at the lower end of the fan's operating range to enable better balance between noise and cooling. Note further that, in my testing, having the fan run at 44 is enough to keep the system from thermal throttling with sustained 100% load on its 8 CPU cores (in 22C ambient temperature and no case) Signed-off-by: Alexey Charkov Acked-by: Dragan Simic Link: https://lore.kernel.org/r/20250120-rock-5c-fan-v1-1-5fb8446c981b@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index 9b14d5383cdc..1b66a69cf0f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -71,7 +71,7 @@ led-1 { fan { compatible = "pwm-fan"; #cooling-cells = <2>; - cooling-levels = <0 64 128 192 255>; + cooling-levels = <0 24 44 64 128 192 255>; fan-supply = <&vcc_5v0>; pwms = <&pwm3 0 10000 0>; }; From cd5681e63fb9887bd05d4ef59151d6a6b39c9d33 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Mon, 20 Jan 2025 23:22:47 +0400 Subject: [PATCH 04/89] arm64: dts: rockchip: Enable automatic fan control on Radxa Rock 5C Add the necessary cooling map to enable the kernel's thermal subsystem to manage the fan speed automatically depending on the overall SoC package temperature on Radxa Rock 5C Signed-off-by: Alexey Charkov Reviewed-by: Dragan Simic Link: https://lore.kernel.org/r/20250120-rock-5c-fan-v1-2-5fb8446c981b@gmail.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588s-rock-5c.dts | 32 ++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index 1b66a69cf0f8..6e56d7704cbe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -68,7 +68,7 @@ led-1 { }; }; - fan { + fan: fan { compatible = "pwm-fan"; #cooling-cells = <2>; cooling-levels = <0 24 44 64 128 192 255>; @@ -417,6 +417,36 @@ rgmii_phy1: ethernet-phy@1 { }; }; +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&package_fan0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&package_fan1>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &pcie2x1l2 { pinctrl-names = "default"; pinctrl-0 = <&pcie20x1_2_perstn_m0>; From 1a6a05d15195f74596d5209b4fd8b781a33b7fbe Mon Sep 17 00:00:00 2001 From: Jianfeng Liu Date: Wed, 15 Jan 2025 10:33:21 +0800 Subject: [PATCH 05/89] arm64: dts: rockchip: Enable HDMI on armsom-sige7 Add the necessary DT changes to enable HDMI on ArmSoM Sige7. Signed-off-by: Jianfeng Liu Link: https://lore.kernel.org/r/20250115023327.2881820-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-armsom-sige7.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index 08f09053a066..b3e9ffe52347 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -4,6 +4,7 @@ #include #include +#include #include "rk3588.dtsi" / { @@ -33,6 +34,17 @@ analog-sound { "Headphone", "Headphones"; }; + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -164,6 +176,26 @@ &gpu { status = "okay"; }; +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -723,3 +755,18 @@ &usb_host1_xhci { dr_mode = "host"; status = "okay"; }; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; From 5afdb98dcc55917df4a8568fd07a119844a7d391 Mon Sep 17 00:00:00 2001 From: Dragan Simic Date: Mon, 2 Dec 2024 15:44:06 +0100 Subject: [PATCH 06/89] arm64: dts: rockchip: Describe why is HWRNG disabled in RK356x base dtsi Despite the presence of the hardware random number generator (HWRNG) in the different Rockchip RK356x SoC variants, it remains disabled for the RK3566 SoC because testing showed [1] that it produces unacceptably low quality of random data, for some yet unknown reason. The HWRNG is enabled for the RK3568 SoC, on which the testing showed good quality of the generated random data. To avoid possible confusion in the future, [2] let's have this described briefly in the RK356x base SoC dtsi. [1] https://lore.kernel.org/linux-rockchip/cover.1720969799.git.daniel@makrotopia.org/T/#u [2] https://lore.kernel.org/linux-rockchip/20241201234613.52322-1-pbrobinson@gmail.com/T/#u Signed-off-by: Dragan Simic Reviewed-by: Diederik de Haas Link: https://lore.kernel.org/r/6b272e2f8f916c04b05db50df621659a5a7f29ab.1733149874.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi index e55390629114..de5e6c0c3d24 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi @@ -1032,6 +1032,11 @@ sdhci: mmc@fe310000 { status = "disabled"; }; + /* + * Testing showed that the HWRNG found in RK3566 produces unacceptably + * low quality of random data, so the HWRNG isn't enabled for all RK356x + * SoC variants despite its presence. + */ rng: rng@fe388000 { compatible = "rockchip,rk3568-rng"; reg = <0x0 0xfe388000 0x0 0x4000>; From 33b561eb66f1e271f2899e103c857d20425076f4 Mon Sep 17 00:00:00 2001 From: Dragan Simic Date: Wed, 8 Jan 2025 05:26:45 +0100 Subject: [PATCH 07/89] arm64: dts: rockchip: Use "dma-noncoherent" in base RK3588 SoC dtsi The preferred way to denote hardware with non-coherent DMA is to use the "dma-noncoherent" DT property, at both the GIC redistributor and the GIC ITS levels, [1] instead of relying on the compatibles to handle hardware errata, in this case the Rockchip 3588001 errata. [2] Let's have the preferred way employed in the base Rockchip RK3588 SoC dtsi, which also goes along with adding initial support for the Rockchip RK3582 SoC variant, with its separate compatible. [2][3] [1] Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml [2] https://lore.kernel.org/linux-rockchip/86msgoozqa.wl-maz@kernel.org/ [3] https://lore.kernel.org/linux-rockchip/20241222030355.2246-4-naoki@radxa.com/ Cc: Marc Zyngier Cc: FUKAUMI Naoki Acked-by: Marc Zyngier Signed-off-by: Dragan Simic Link: https://lore.kernel.org/r/fa1a672dae3644bb3caa58f03216d0ca349db88b.1736279094.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 8cfa30837ce7..574bc4497d13 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -2022,6 +2022,7 @@ gic: interrupt-controller@fe600000 { <0x0 0xfe680000 0 0x100000>; /* GICR */ interrupts = ; interrupt-controller; + dma-noncoherent; mbi-alias = <0x0 0xfe610000>; mbi-ranges = <424 56>; msi-controller; @@ -2033,6 +2034,7 @@ gic: interrupt-controller@fe600000 { its0: msi-controller@fe640000 { compatible = "arm,gic-v3-its"; reg = <0x0 0xfe640000 0x0 0x20000>; + dma-noncoherent; msi-controller; #msi-cells = <1>; }; @@ -2040,6 +2042,7 @@ its0: msi-controller@fe640000 { its1: msi-controller@fe660000 { compatible = "arm,gic-v3-its"; reg = <0x0 0xfe660000 0x0 0x20000>; + dma-noncoherent; msi-controller; #msi-cells = <1>; }; From d0f17738778c12be629ba77ff00c43c3e9eb8428 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 4 Feb 2025 14:40:07 +0200 Subject: [PATCH 08/89] arm64: dts: rockchip: Enable HDMI0 PHY clk provider on RK3588 Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support"), the HDMI PHY PLL can be used as an alternative and more accurate pixel clock source for VOP2 to improve display modes handling on RK3588 SoC. Add the missing #clock-cells property to allow using the clock provider functionality of HDMI0 PHY. Signed-off-by: Cristian Ciocaltea Tested-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-4-d71c6a196e58@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 574bc4497d13..1d299c99b4e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -2815,6 +2815,7 @@ hdptxphy_hdmi0: phy@fed60000 { reg = <0x0 0xfed60000 0x0 0x2000>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; clock-names = "ref", "apb"; + #clock-cells = <0>; #phy-cells = <0>; resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, From eb4262203d7d85eb7b6f2696816db272e41f5464 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 4 Feb 2025 14:40:08 +0200 Subject: [PATCH 09/89] arm64: dts: rockchip: Add HDMI0 PHY PLL clock source to VOP2 on RK3588 VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and more accurate pixel clock source to improve handling of display modes up to 4K@60Hz on video ports 0, 1 and 2. For now only HDMI0 output is supported, hence add the related PLL clock. Tested-by: FUKAUMI Naoki Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-5-d71c6a196e58@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 1d299c99b4e7..c53cd90d4112 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1261,14 +1261,16 @@ vop: vop@fdd90000 { <&cru DCLK_VOP1>, <&cru DCLK_VOP2>, <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; + <&cru PCLK_VOP_ROOT>, + <&hdptxphy_hdmi0>; clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2", "dclk_vp3", - "pclk_vop"; + "pclk_vop", + "pll_hdmiphy0"; iommus = <&vop_mmu>; power-domains = <&power RK3588_PD_VOP>; rockchip,grf = <&sys_grf>; From 2efdb041019fd6c58abefba3eb6fdc4d659e576c Mon Sep 17 00:00:00 2001 From: Damon Ding Date: Thu, 6 Feb 2025 11:03:30 +0800 Subject: [PATCH 10/89] arm64: dts: rockchip: Fix label name of hdptxphy for RK3588 The hdptxphy is a combo transmit-PHY for HDMI2.1 TMDS Link, FRL Link, DP and eDP Link. Therefore, it is better to name it hdptxphy0 other than hdptxphy_hdmi0, which will be referenced by both hdmi0 and edp0 nodes. Signed-off-by: Damon Ding Link: https://lore.kernel.org/r/20250206030330.680424-3-damon.ding@rock-chips.com [added armsom-sige7, where hdmi-support was added recently and also the hdptxphy0-as-dclk source I just added] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts | 2 +- .../boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 2 +- 21 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index b3e9ffe52347..b89888fe5d46 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -192,7 +192,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index c53cd90d4112..a81a193fa136 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1262,7 +1262,7 @@ vop: vop@fdd90000 { <&cru DCLK_VOP2>, <&cru DCLK_VOP3>, <&cru PCLK_VOP_ROOT>, - <&hdptxphy_hdmi0>; + <&hdptxphy0>; clock-names = "aclk", "hclk", "dclk_vp0", @@ -1387,7 +1387,7 @@ hdmi0: hdmi@fde80000 { , ; interrupt-names = "avp", "cec", "earc", "main", "hpd"; - phys = <&hdptxphy_hdmi0>; + phys = <&hdptxphy0>; pinctrl-names = "default"; pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; @@ -2812,7 +2812,7 @@ dmac2: dma-controller@fed10000 { #dma-cells = <1>; }; - hdptxphy_hdmi0: phy@fed60000 { + hdptxphy0: phy@fed60000 { compatible = "rockchip,rk3588-hdptx-phy"; reg = <0x0 0xfed60000 0x0 0x2000>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts index 9d525c8ff725..9eda69722665 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts @@ -129,7 +129,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts index 92f0ed83c990..d1be72eb63a4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts @@ -166,7 +166,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index ba49f0bbaac6..3fd0665cde2c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -364,7 +364,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts index 2be5251d3e3b..e086114c7634 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts @@ -337,7 +337,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts index b3a04ca370bb..8171fbfd819a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts @@ -335,7 +335,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts index 4791b77f3571..c8bc85b7d133 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts @@ -207,7 +207,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index 90f823b2c219..ef56380530f9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -303,7 +303,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index cb350727d116..0d9b5020acc0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -360,7 +360,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index ce44549babf4..9baca7f9ce48 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -39,7 +39,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 255e33c5dbdc..0f874b87b47e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -125,7 +125,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index d597112f1d5b..86a9f2f35e66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -220,7 +220,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts index 3187b4918a30..795d8175e654 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts @@ -189,7 +189,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts index 9c394f733bbf..f471baca6d31 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -236,7 +236,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 4a3aa80f2226..74a4f03e05e3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -278,7 +278,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index d2eddea1840f..cd47969fadba 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -251,7 +251,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts index 8f034c6d494c..1463bd36b1b2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts @@ -264,7 +264,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi index d86aeacca238..9e16960b8705 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi @@ -197,7 +197,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 70a43432bdc5..676cc4fec269 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -334,7 +334,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index 6e56d7704cbe..9dcf774706ca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -278,7 +278,7 @@ hdmi0_out_con: endpoint { }; }; -&hdptxphy_hdmi0 { +&hdptxphy0 { status = "okay"; }; From aba881f30e0294a58c0cb076918d366e39801185 Mon Sep 17 00:00:00 2001 From: Diederik de Haas Date: Fri, 7 Feb 2025 12:11:39 +0100 Subject: [PATCH 11/89] arm64: dts: rockchip: add 'chassis-type' property on PineNote Add the recommended chassis-type root node property so userspace can request the form factor and adjust their behavior accordingly. Signed-off-by: Diederik de Haas Reviewed-by: Dragan Simic Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250207111157.297276-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 2d3ae1544822..3613661417b2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -9,6 +9,8 @@ #include "rk3566.dtsi" / { + chassis-type = "tablet"; + aliases { mmc0 = &sdhci; }; From 52cababc9c1914ebf50929bfb9a67c8f74cd60ab Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Tue, 4 Feb 2025 13:02:28 +0400 Subject: [PATCH 12/89] arm64: dts: rockchip: switch Rock 5C to PMIC-based TSHUT reset Radxa Rock 5C supports both CRU-based (default) and PMIC-based reset upon thermal runaway conditions. The former resets the SoC by internally poking the CRU from TSADC, while the latter power-cycles the whole board by pulling the PMIC reset line low in case of uncontrolled overheating. Switch to a PMIC-based reset, as the more 'thorough' of the two. Tested by temporarily setting rockchip,hw-tshut-temp to 65C to simulate overheating - this causes the board to reset when any of the on-chip temperature sensors surpasses the tshut temperature. Requires Alexander's patch [1] fixing TSADC pinctrl assignment [1] https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com Signed-off-by: Alexey Charkov Reviewed-by: Dragan Simic Link: https://lore.kernel.org/r/20250204-rock-5c-tshut-v1-1-33301e4eef64@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index 9dcf774706ca..ef8ce10d8f50 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -873,6 +873,8 @@ regulator-state-mem { }; &tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ status = "okay"; }; From f62f325a586682b7fff643c9fd8edc348bff6abc Mon Sep 17 00:00:00 2001 From: Junhao Xie Date: Tue, 14 Jan 2025 08:14:09 +0800 Subject: [PATCH 13/89] dt-bindings: vendor-prefixes: Add prefix for Ariaboard Add an entry for Ariaboard from Shanghai Novotech Ariaboard represents a product line from Shanghai Novotech Co., Ltd. Link: https://shanghainovotech.com/ Link: https://ariaboard.com/ Signed-off-by: Junhao Xie Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250114001411.1848529-2-bigfoot@classfun.cn Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 5079ca6ce1d1..3944eb12e69a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -147,6 +147,8 @@ patternProperties: description: Arctic Sand "^arcx,.*": description: arcx Inc. / Archronix Inc. + "^ariaboard,.*": + description: Shanghai Novotech Co., Ltd. (Ariaboard) "^aries,.*": description: Aries Embedded GmbH "^arm,.*": From df6acc1b3dcdde388547eff926b41fdb22e697b5 Mon Sep 17 00:00:00 2001 From: Junhao Xie Date: Tue, 14 Jan 2025 08:14:10 +0800 Subject: [PATCH 14/89] dt-bindings: arm: rockchip: Add Ariaboard Photonicat RK3568 This documents Ariaboard Photonicat which is a router based on RK3568 SoC. Link: https://ariaboard.com/ Link: https://photonicat.com/ Signed-off-by: Junhao Xie Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250114001411.1848529-3-bigfoot@classfun.cn Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 522a6f0450ea..23293344d8eb 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -49,6 +49,11 @@ properties: - anbernic,rg-arc-s - const: rockchip,rk3566 + - description: Ariaboard Photonicat + items: + - const: ariaboard,photonicat + - const: rockchip,rk3568 + - description: ArmSoM Sige5 board items: - const: armsom,sige5 From ba124e06ce7b7f48d492e3fb155a520d278f5824 Mon Sep 17 00:00:00 2001 From: Junhao Xie Date: Tue, 14 Jan 2025 08:14:11 +0800 Subject: [PATCH 15/89] arm64: dts: rockchip: add dts for Ariaboard Photonicat RK3568 Add dts for Ariaboard Photonicat RK3568. Partially based on downstream board dts. [1] Working IO: Debug UART SDIO QCA9377 WiFi and Bluetooth M.2 E-Key PCIe WiFi and Bluetooth M.2 B-Key USB Modem WWAN Ethernet WAN Port MicroSD Card slot eMMC HDMI Output Mali GPU USB Type-A Not working IO: Ethernet LAN Port (Lack of SGMII support) Power management MCU on UART4 (Driver pending) Not working IO in MCU: Battery voltage sensor Board temperature sensor Hardware Power-off Hardware Watchdog Network status LED Real-time clock USB Charger voltage sensor About onboard power management MCU: A heartbeat must be sent to the MCU within 60 seconds, otherwise the MCU will restart the system. When powering off, a shutdown command needs to be sent to the MCU. When the power button is long pressed, the MCU will send a shutdown command to the system. If system does not shutdown within 60 seconds, the power will be turned off directly. MCU only provides voltage for charger and battery. Manufacturer removed RK8xx PMIC. [1] https://github.com/photonicat/rockchip_rk3568_kernel/blob/novotech-5.10/arch/arm64/boot/dts/rockchip/rk3568-photonicat-base.dtsi Signed-off-by: Junhao Xie Link: https://lore.kernel.org/r/20250114001411.1848529-4-bigfoot@classfun.cn Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3568-photonicat.dts | 588 ++++++++++++++++++ 2 files changed, 589 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index def1222c1907..57c5c013cc08 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts new file mode 100644 index 000000000000..58c1052ba8ef --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3568.dtsi" + +/ { + model = "Ariaboard Photonicat"; + compatible = "ariaboard,photonicat", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + }; + + battery: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion"; + charge-full-design-microamp-hours = <6800000>; + energy-full-design-microwatt-hours = <25000000>; + voltage-max-design-microvolt = <4200000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4100000 100>, <4040000 90>, + <3980000 80>, <3920000 70>, + <3870000 60>, <3820000 50>, + <3790000 40>, <3770000 30>, + <3740000 20>, <3680000 10>, + <3450000 0>; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi_con: hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* actually fed by vcc_syson, dependent + * on pi6c clock generator + */ + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_pi6c>; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c: regulator-vcc3v3-pi6c { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_pi6c"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_syson>; + }; + + vcc3v3_sd: regulator-vcc3v3-sd { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwren>; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_syson>; + }; + + vcc3v4_rf: regulator-vcc3v4-rf { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&rf_pwr_en>; + regulator-name = "vcc3v4_rf"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + vin-supply = <&vccin_5v>; + }; + + vcc5v0_usb30_otg0: regulator-vcc5v0-usb30-otg0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb30_otg0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vccin_5v>; + }; + + vccin_5v: regulator-vccin-5v { + compatible = "regulator-fixed"; + regulator-name = "vccin_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_sysin: regulator-vcc-sysin { + compatible = "regulator-fixed"; + regulator-name = "vcc_sysin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vccin_5v>; + }; + + vcc_syson: regulator-vcc-syson { + compatible = "regulator-fixed"; + regulator-name = "vcc_syson"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sysin>; + }; + + vcca_1v8: regulator-vcca-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdda_0v9: regulator-vdda-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdd_gpu: regulator-vdd-gpu { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 5000 1>; + pwm-supply = <&vcc_syson>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-settling-time-up-us = <250>; + }; + + vdd_logic: regulator-vdd-logic { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + pwm-supply = <&vcc_syson>; + regulator-name = "vdd_logic"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-settling-time-up-us = <250>; + }; + + rfkill-modem { + compatible = "rfkill-gpio"; + label = "M.2 USB Modem"; + radio-type = "wwan"; + shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h &clk32k_out1>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +/* Motorcomm YT8521SC LAN port (require SGMII) */ +&gmac0 { + status = "disabled"; +}; + +/* Motorcomm YT8521SC WAN port */ +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcca_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_syson>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&mdio1 { + rgmii_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +/* M.2 E-Key for PCIe WLAN */ +&pcie3x2 { + max-link-speed = <1>; + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1m0_pins>; + reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc0 { + sdmmc0_pwren: sdmmc0-pwren { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + rf_pwr_en: rf-pwr-en { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +/* eMMC */ +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* Micro SD card slot */ +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; + disable-wp; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +/* Qualcomm Atheros QCA9377 WiFi */ +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = ; + interrupt-names = "host-wake"; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +/* Qualcomm Atheros QCA9377 Bluetooth */ +&uart1 { + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "qcom,qca9377-bt"; + clocks = <&pmucru CLK_RTC_32K>; + enable-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h>; + vddio-supply = <&vcc_1v8>; + }; +}; + +/* Debug UART */ +&uart2 { + status = "okay"; +}; + +&uart3 { + dma-names = "tx", "rx"; + status = "okay"; +}; + +/* Onboard power management MCU */ +&uart4 { + dma-names = "tx", "rx"; + status = "okay"; +}; + +/* M.2 E-Key for USB Bluetooth */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* USB Type-A Port */ +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +/* M.2 B-Key for USB Modem WWAN */ +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc3v4_rf>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb30_otg0>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb30_otg0>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&xin32k { + pinctrl-names = "default"; + pinctrl-0 = <&clk32k_out1>; +}; From c548f8e825069dd2922d2fee8568c0771a002005 Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Thu, 5 Dec 2024 16:22:58 +0800 Subject: [PATCH 16/89] dt-bindings: vendor-prefixes: Update rockchip company name Rockchip company name has update to below name since 2021: Rockchip Electronics Co., Ltd. Signed-off-by: Kever Yang Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241205082258.857018-1-kever.yang@rock-chips.com Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 3944eb12e69a..6a4c37e761a1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1269,7 +1269,7 @@ patternProperties: "^riscv,.*": description: RISC-V Foundation "^rockchip,.*": - description: Fuzhou Rockchip Electronics Co., Ltd + description: Rockchip Electronics Co., Ltd. "^rocktech,.*": description: ROCKTECH DISPLAYS LIMITED "^rohm,.*": From 271ba4d6c56c7cb295def511cbcdd9880ec41e1b Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Mon, 20 Jan 2025 13:01:28 +0400 Subject: [PATCH 17/89] arm64: dts: rockchip: Add SPDIF nodes to RK3588(s) device trees RK3588s has four SPDIF transmitters, and the full RK3588 has six. They are software compatible to RK3568 ones. Add respective nodes to .dtsi files. Adapted from vendor sources at [1] and [2], respectively [1] https://github.com/rockchip-linux/kernel/blob/develop-5.10/arch/arm64/boot/dts/rockchip/rk3588s.dtsi [2] https://github.com/rockchip-linux/kernel/blob/develop-5.10/arch/arm64/boot/dts/rockchip/rk3588.dtsi Signed-off-by: Alexey Charkov Link: https://lore.kernel.org/r/20250120-rk3588-spdif-v1-2-1415f5871dc7@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 64 +++++++++++++++++++ .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 30 +++++++++ 2 files changed, 94 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index a81a193fa136..dd1d26be391c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1320,6 +1320,21 @@ vop_mmu: iommu@fdd97e00 { status = "disabled"; }; + spdif_tx2: spdif-tx@fddb0000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfddb0000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF2_DP0_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF2>, <&cru HCLK_SPDIF2_DP0>; + dma-names = "tx"; + dmas = <&dmac1 6>; + interrupts = ; + power-domains = <&power RK3588_PD_VO0>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s4_8ch: i2s@fddc0000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc0000 0x0 0x1000>; @@ -1337,6 +1352,21 @@ i2s4_8ch: i2s@fddc0000 { status = "disabled"; }; + spdif_tx3: spdif-tx@fdde0000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfdde0000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF3_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF3>, <&cru HCLK_SPDIF3>; + dma-names = "tx"; + dmas = <&dmac1 7>; + interrupts = ; + power-domains = <&power RK3588_PD_VO1>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s5_8ch: i2s@fddf0000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddf0000 0x0 0x1000>; @@ -2018,6 +2048,40 @@ &i2s3_sdi status = "disabled"; }; + spdif_tx0: spdif-tx@fe4e0000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfe4e0000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF0_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF0>, <&cru HCLK_SPDIF0>; + dma-names = "tx"; + dmas = <&dmac0 5>; + interrupts = ; + pinctrl-0 = <&spdif0m0_tx>; + pinctrl-names = "default"; + power-domains = <&power RK3588_PD_AUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif_tx1: spdif-tx@fe4f0000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfe4f0000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF1_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF1>, <&cru HCLK_SPDIF1>; + dma-names = "tx"; + dmas = <&dmac1 5>; + interrupts = ; + pinctrl-0 = <&spdif1m0_tx>; + pinctrl-names = "default"; + power-domains = <&power RK3588_PD_AUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index 4a950907ea6f..505cdd7b518e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -67,6 +67,21 @@ u2phy1_otg: otg-port { }; }; + spdif_tx5: spdif-tx@fddb8000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfddb8000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF5_DP1_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF5>, <&cru HCLK_SPDIF5_DP1>; + dma-names = "tx"; + dmas = <&dmac1 22>; + interrupts = ; + power-domains = <&power RK3588_PD_VO0>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s8_8ch: i2s@fddc8000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc8000 0x0 0x1000>; @@ -84,6 +99,21 @@ i2s8_8ch: i2s@fddc8000 { status = "disabled"; }; + spdif_tx4: spdif-tx@fdde8000 { + compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; + reg = <0x0 0xfdde8000 0x0 0x1000>; + assigned-clock-parents = <&cru PLL_AUPLL>; + assigned-clocks = <&cru CLK_SPDIF4_SRC>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF4>, <&cru HCLK_SPDIF4>; + dma-names = "tx"; + dmas = <&dmac1 8>; + interrupts = ; + power-domains = <&power RK3588_PD_VO1>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s6_8ch: i2s@fddf4000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddf4000 0x0 0x1000>; From cd81ee8667cc13ff69e11b44a727be07035aa536 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Mon, 20 Jan 2025 13:01:29 +0400 Subject: [PATCH 18/89] arm64: dts: rockchip: Enable SPDIF output on H96 Max V58 H96 Max V58 has its spdif_tx0 controller wired to a dedicated optical Toslink SPDIF socket, enable it in the device tree Signed-off-by: Alexey Charkov Link: https://lore.kernel.org/r/20250120-rk3588-spdif-v1-3-1415f5871dc7@gmail.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-h96-max-v58.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts index c8bc85b7d133..a0e685b55d21 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts @@ -140,6 +140,24 @@ vcc5v0_sys: regulator-5v0-sys { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif_tx0>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; }; &combphy0_ps { @@ -400,6 +418,12 @@ &sdhci { status = "okay"; }; +&spdif_tx0 { + pinctrl-names = "default"; + pinctrl-0 = <&spdif0m1_tx>; + status = "okay"; +}; + &spi2 { assigned-clocks = <&cru CLK_SPI2>; assigned-clock-rates = <200000000>; From ea97212a0f66b7bd71c23c12f781f1770dd6fcff Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Wed, 11 Dec 2024 01:06:15 +0200 Subject: [PATCH 19/89] arm64: dts: rockchip: Add PHY node for HDMI1 TX port on RK3588 In preparation to enable the second HDMI output port found on RK3588 SoC, add the related PHY node. This requires a GRF, hence add the dependent node as well. Signed-off-by: Cristian Ciocaltea Tested-by: Jagan Teki # edgeble-6tops-modules Tested-by: Alexandre ARNOUD Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-2-02cdca22ff68@collabora.com Signed-off-by: Heiko Stuebner --- .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index 505cdd7b518e..f5ffe593a182 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -67,6 +67,11 @@ u2phy1_otg: otg-port { }; }; + hdptxphy1_grf: syscon@fd5e4000 { + compatible = "rockchip,rk3588-hdptxphy-grf", "syscon"; + reg = <0x0 0xfd5e4000 0x0 0x100>; + }; + spdif_tx5: spdif-tx@fddb8000 { compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif"; reg = <0x0 0xfddb8000 0x0 0x1000>; @@ -429,6 +434,22 @@ sata-port@0 { }; }; + hdptxphy1: phy@fed70000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed70000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>, + <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>, + <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>, + <&cru SRST_HDPTX1_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", + "lcpll"; + rockchip,grf = <&hdptxphy1_grf>; + status = "disabled"; + }; + usbdp_phy1: phy@fed90000 { compatible = "rockchip,rk3588-usbdp-phy"; reg = <0x0 0xfed90000 0x0 0x10000>; From bed6964e779b5853de042da14320edf9f79506fe Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Wed, 11 Dec 2024 01:06:16 +0200 Subject: [PATCH 20/89] arm64: dts: rockchip: Add HDMI1 node on RK3588 Add support for the second HDMI TX port found on RK3588 SoC. Signed-off-by: Cristian Ciocaltea Tested-by: Jagan Teki # edgeble-6tops-modules Tested-by: Alexandre ARNOUD Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-3-02cdca22ff68@collabora.com Signed-off-by: Heiko Stuebner --- .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index f5ffe593a182..8b2edf362ce8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -170,6 +170,47 @@ i2s10_8ch: i2s@fde00000 { status = "disabled"; }; + hdmi1: hdmi@fdea0000 { + compatible = "rockchip,rk3588-dw-hdmi-qp"; + reg = <0x0 0xfdea0000 0x0 0x20000>; + clocks = <&cru PCLK_HDMITX1>, + <&cru CLK_HDMITX1_EARC>, + <&cru CLK_HDMITX1_REF>, + <&cru MCLK_I2S6_8CH_TX>, + <&cru CLK_HDMIHDP1>, + <&cru HCLK_VO1>; + clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1"; + interrupts = , + , + , + , + ; + interrupt-names = "avp", "cec", "earc", "main", "hpd"; + phys = <&hdptxphy1>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_HDMITX1_REF>, <&cru SRST_HDMIHDP1>; + reset-names = "ref", "hdp"; + rockchip,grf = <&sys_grf>; + rockchip,vo-grf = <&vo1_grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi1_in: port@0 { + reg = <0>; + }; + + hdmi1_out: port@1 { + reg = <1>; + }; + }; + }; + pcie3x4: pcie@fe150000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; #address-cells = <3>; From 77cea7ca13680e14119a3b9635c7ef16cd7ee44e Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Wed, 11 Dec 2024 01:06:17 +0200 Subject: [PATCH 21/89] arm64: dts: rockchip: Enable HDMI1 on rock-5b Add the necessary DT changes to enable the second HDMI output port on Radxa ROCK 5B. While at it, switch the position of &vop_mmu and @vop to maintain the alphabetical order. Signed-off-by: Cristian Ciocaltea Tested-by: Alexandre ARNOUD Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-4-02cdca22ff68@collabora.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-rock-5b.dts | 44 ++++++++++++++++++- 1 file changed, 42 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 86a9f2f35e66..5acec6b97a46 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -49,6 +49,17 @@ hdmi0_con_in: endpoint { }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -220,10 +231,32 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -891,11 +924,11 @@ &usb_host2_xhci { status = "okay"; }; -&vop_mmu { +&vop { status = "okay"; }; -&vop { +&vop_mmu { status = "okay"; }; @@ -905,3 +938,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; From 4a2fdf91e1239d9659d0317f3e8e37681ac555a4 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 27 Dec 2024 18:59:36 +0530 Subject: [PATCH 22/89] arm64: dts: rockchip: Enable HDMI1 out for Edgeble-6TOPS Modules Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588. Enable it on Edgeble-6TOPS IO Board dtsi. Cc: Cristian Ciocaltea Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20241227132936.168100-1-jagan@edgeble.ai Signed-off-by: Heiko Stuebner --- .../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi index 7125790bbed2..08920344a4b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi @@ -4,12 +4,24 @@ */ #include +#include / { chosen { stdout-path = "serial2:1500000n8"; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + /* Unnamed gated oscillator: 100MHz,3.3V,3225 */ pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator { compatible = "gated-fixed-clock"; @@ -81,6 +93,26 @@ &combphy2_psu { status = "okay"; }; +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdptxphy1 { + status = "okay"; +}; + &i2c6 { status = "okay"; @@ -275,3 +307,18 @@ &usb_host1_ohci { &usb_host2_xhci { status = "okay"; }; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp0>; + }; +}; From b3dc2a9315c4046b330a784c0527c671fd236414 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Thu, 30 Jan 2025 12:10:04 -0600 Subject: [PATCH 23/89] arm64: dts: rockchip: remove rk3588 optee node Remove Optee node from rk3588 devicetree. When Optee is present and used the node will be added automatically by U-Boot when CONFIG_OPTEE_LIB=y and CONFIG_SPL_ATF_NO_PLATFORM_PARAM is not set. When Optee is not present or used, the node will trigger a probe that generates a (harmless) message on the kernel log. Signed-off-by: Chris Morgan Link: https://lore.kernel.org/r/20250130181005.6319-1-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index dd1d26be391c..5d0fbb6d89ec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -358,11 +358,6 @@ display_subsystem: display-subsystem { }; firmware { - optee: optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - scmi: scmi { compatible = "arm,scmi-smc"; arm,smc-id = <0x82000010>; From e857cdedbe1f9aedad4e307188c55ccba28a3e76 Mon Sep 17 00:00:00 2001 From: Dragan Simic Date: Mon, 10 Feb 2025 21:17:00 +0100 Subject: [PATCH 24/89] arm64: dts: rockchip: linewrap gmac assigned-clocks on Quartz64 Model A/B files a bit Going over the 80-column width limit, and using all 100 columns, is intended for improving code readability. This wasn't the case in a few places in the Quartz64 Model A/B board dts files, so let's reflow them a bit, to both obey the 80-column limit and make them a bit more readable. No intended functional changes are introduced by these changes. Signed-off-by: Dragan Simic Link: https://lore.kernel.org/r/7eea4ebdb19d5f43d24074a166e6c46bb5424d46.1739218324.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 8 ++++++-- arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index 98e75df8b158..3c127c5c2607 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -265,8 +265,12 @@ map1 { }; &gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, + <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>, + <&gmac1_clkin>; clock_in_out = "input"; phy-supply = <&vcc_3v3>; phy-mode = "rgmii"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 24928a129446..5707321a1144 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -173,8 +173,12 @@ &cpu3 { }; &gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, + <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>, + <&gmac1_clkin>; clock_in_out = "input"; phy-mode = "rgmii"; phy-supply = <&vcc_3v3>; From fa15cc73121279f93757ec76312b0d0b73f7462a Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Wed, 8 Jan 2025 23:16:18 -0600 Subject: [PATCH 25/89] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max Enable the second HDMI output port on the Orange Pi 5 Max Signed-off-by: Jimmy Hon Link: https://lore.kernel.org/r/20250109051619.1825-5-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- .../dts/rockchip/rk3588-orangepi-5-max.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index 9baca7f9ce48..26421ca7843b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -21,6 +21,17 @@ hdmi0_con_in: endpoint { }; }; }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; }; &hdmi0 { @@ -39,10 +50,33 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &pinctrl { usb { @@ -58,3 +92,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; From eb439f16861a8f1fca2c6d021cf7fce0a7a0ca8d Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 11 Feb 2025 15:02:50 +0100 Subject: [PATCH 26/89] arm64: dts: rockchip: add overlay test for WolfVision PF5 The WolfVision PF5 can have a PF5 Visualizer display and PF5 IO Expander board connected to it. Therefore, let's generate an overlay test so the application of the two overlays are validated against the base DTB. Suggested-by: Michael Riesch Reviewed-by: Michael Riesch Reviewed-by: Dragan Simic Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-1-4484b0f88cfc@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 57c5c013cc08..95139430f9c4 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -171,3 +171,25 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb + +# Overlay application tests +# +# A .dtbo must have its own +# +# dtb-$(CONFIG_ARCH_ROCKCHIP) += .dtbo +# +# entry, and at least one overlay application test reflecting a possible +# hardware combination in real life: +# +# dtb-$(CONFIG_ARCH_ROCKCHIP) += .dtb +# -dtbs := .dtb .dtbo [.dtbo ...] +# +# This will make the .dtb have symbols (like when DTC_FLAGS has -@ passed) +# and generate a new DTB (.dtb) which is the +# result of the application of .dtbo and other listed overlays on top +# of .dtb. + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb +rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ + rk3568-wolfvision-pf5-display-vz.dtbo \ + rk3568-wolfvision-pf5-io-expander.dtbo From 91abdc6b36e12a2c3a477bde90e9f1dd8c2413bf Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 11 Feb 2025 15:02:51 +0100 Subject: [PATCH 27/89] arm64: dts: rockchip: add overlay test for Edgeble NCM6A/NCM6B The Edgeble NCM6A/NCM6B can have WiFi modules connected and this is handled via an overlay (commit 951d6aaa37fe ("arm64: dts: rockchip: Add Edgeble NCM6A WiFi6 Overlay")). Despite the name of the overlay, it applies to both NCM6A and NCM6B[1]. In order to make sure the overlay is still valid in the future, let's add a validation test by applying the overlay on top of the main bases at build time. [1] https://lore.kernel.org/linux-rockchip/CA+VMnFyom=2BmJ_nt-At6hTQP0v+Auaw-DkCVbT9mjndMmLKtQ@mail.gmail.com/ Reviewed-by: Krzysztof Kozlowski Reviewed-by: Dragan Simic Reviewed-by: Jagan Teki Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-2-4484b0f88cfc@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 95139430f9c4..c4c5ce62bda0 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -193,3 +193,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ rk3568-wolfvision-pf5-io-expander.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtb +rk3588-edgeble-neu6a-wifi-dtbs := rk3588-edgeble-neu6a-io.dtb \ + rk3588-edgeble-neu6a-wifi.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb +rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \ + rk3588-edgeble-neu6a-wifi.dtbo From e95b72390886f5b4127417e4732cae57c8d89b14 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 11 Feb 2025 15:02:52 +0100 Subject: [PATCH 28/89] arm64: dts: rockchip: add overlay tests for Rock 5B PCIe overlays According to commit 40658534756f ("arm64: dts: rockchip: Add rock5b overlays for PCIe endpoint mode"), Rock 5B can operate in PCIe endpoint mode. For that to work, the rk3588-rock-5b-pcie-ep.dtbo overlay needs to be applied on Rock 5B base Device Tree. If that Rock 5B is connected to another Rock 5B, the latter needs to apply the rk3588-rock-5b-pcie-srns.dtbo overlay. In order to make sure the overlays are still valid in the future, let's add a validation test by applying the overlays on top of the main base at build time. Reviewed-by: Krzysztof Kozlowski Reviewed-by: Niklas Cassel Reviewed-by: Dragan Simic Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-3-4484b0f88cfc@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index c4c5ce62bda0..ff205991633e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -201,3 +201,11 @@ rk3588-edgeble-neu6a-wifi-dtbs := rk3588-edgeble-neu6a-io.dtb \ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtb +rk3588-rock-5b-pcie-ep-dtbs := rk3588-rock-5b.dtb \ + rk3588-rock-5b-pcie-ep.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtb +rk3588-rock-5b-pcie-srns-dtbs := rk3588-rock-5b.dtb \ + rk3588-rock-5b-pcie-srns.dtbo From 920ceeedeb00eef0c3c4f5f0276882b4666dc770 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 11 Feb 2025 15:02:53 +0100 Subject: [PATCH 29/89] arm64: dts: rockchip: minimal support for Pre-ICT tester adapter for RK3588 Jaguar The Pre-ICT tester adapter connects to RK3588 Jaguar SBC through its proprietary Mezzanine connector. It exposes a PCIe Gen2 1x M.2 connector and two proprietary camera connectors. Support for the latter will come once the rest of the camera stack is supported. Additionally, the adapter loops some GPIOs together as well as route some GPIOs to power rails. This adapter is used for manufacturing RK3588 Jaguar to be able to test the Mezzanine connector is properly soldered. Acked-by: Krzysztof Kozlowski Reviewed-by: Dragan Simic # Makefile Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-4-4484b0f88cfc@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 5 + .../rk3588-jaguar-pre-ict-tester.dtso | 171 ++++++++++++++++++ 2 files changed, 176 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ff205991633e..d5a6a478e69d 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -146,6 +146,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb @@ -202,6 +203,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtb +rk3588-jaguar-pre-ict-tester-dtbs := rk3588-jaguar.dtb \ + rk3588-jaguar-pre-ict-tester.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtb rk3588-rock-5b-pcie-ep-dtbs := rk3588-rock-5b.dtb \ rk3588-rock-5b-pcie-ep.dtbo diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso new file mode 100644 index 000000000000..9d44dfe2f30d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2024 Cherry Embedded Solutions GmbH + * + * Device Tree Overlay for the Pre-ICT tester adapter for the Mezzanine + * connector on RK3588 Jaguar. + * + * This adapter has a PCIe Gen2 x1 M.2 M-Key connector and two proprietary + * camera connectors (each their own I2C bus, clock, reset and PWM lines as well + * as 2-lane CSI). + * + * This adapter routes some GPIOs to power rails and loops together some other + * GPIOs. + * + * This adapter is used during manufacturing for validating proper soldering of + * the mezzanine connector. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + pre_ict_tester_vcc_1v2: regulator-pre-ict-tester-vcc-1v2 { + compatible = "regulator-fixed"; + regulator-name = "pre_ict_tester_vcc_1v2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc_3v3_s3>; + }; + + pre_ict_tester_vcc_2v8: regulator-pre-ict-tester-vcc-2v8 { + compatible = "regulator-fixed"; + regulator-name = "pre_ict_tester_vcc_2v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&gpio3 { + pinctrl-0 = <&pre_ict_pwr2gpio>; + pinctrl-names = "default"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2x1l2_perstn_m0>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; /* PCIE20X1_2_PERSTN_M0 */ + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; +}; + +&pinctrl { + pcie2x1l2 { + pcie2x1l2_perstn_m0: pcie2x1l2-perstn-m0 { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pre-ict-tester { + pre_ict_pwr2gpio: pre-ict-pwr2gpio-pins { + rockchip,pins = + /* + * GPIO3_A3 requires two power rails to be properly + * routed to the mezzanine connector to report a proper + * value: VCC_1V8_S0_1 and VCC_IN_2. It may report an + * incorrect value if VCC_1V8_S0_1 isn't properly routed, + * but GPIO3_C6 would catch this HW soldering issue. + * If VCC_IN_2 is properly routed, GPIO3_A3 should be + * LOW. The signal shall not read HIGH in the event + * GPIO3_A3 isn't properly routed due to soldering + * issue. Therefore, let's enforce a pull-up (which is + * the SoC default for this pin). + */ + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + /* + * GPIO3_A4 is directly routed to VCC_1V8_S0_2 power + * rail. It should be HIGH if all is properly soldered. + * To guarantee that, a pull-down is enforced (which is + * the SoC default for this pin) so that LOW is read if + * the loop doesn't exist on HW (soldering issue on + * either signals). + */ + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>, + /* + * GPIO3_B2 requires two power rails to be properly + * routed to the mezzanine connector to report a proper + * value: VCC_1V8_S0_1 and VCC_IN_1. It may report an + * incorrect value if VCC_1V8_S0_1 isn't properly routed, + * but GPIO3_C6 would catch this HW soldering issue. + * If VCC_IN_1 is properly routed, GPIO3_B2 should be + * LOW. This is an issue if GPIO3_B2 isn't properly + * routed due to soldering issue, because GPIO3_B2 + * default bias is pull-down therefore being LOW. So + * the worst case scenario and the pass scenario expect + * the same value. Make GPIO3_B2 a pull-up so that a + * soldering issue on GPIO3_B2 reports HIGH but proper + * soldering reports LOW. + */ + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + /* + * GPIO3_C6 is directly routed to VCC_1V8_S0_1 power + * rail. It should be HIGH if all is properly soldered. + * This is an issue if GPIO3_C6 or VCC_1V8_S0_1 isn't + * properly routed due to soldering issue, because + * GPIO3_C6 default bias is pull-up therefore being HIGH + * in all cases: + * - GPIO3_C6 is floating (so HIGH) if GPIO3_C6 is not + * routed properly, + * - GPIO3_C6 is floating (so HIGH) if VCC_1V8_S0_1 is + * not routed properly, + * - GPIO3_C6 is HIGH if everything is proper, + * Make GPIO3_C6 a pull-down so that a soldering issue + * on GPIO3_C6 or VCC_1V8_S0_1 reports LOW but proper + * soldering reports HIGH. + */ + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>, + /* + * GPIO3_D2 is routed to VCC_5V0_1 power rail through a + * voltage divider on the adapter. + * It should be HIGH if all is properly soldered. + * To guarantee that, a pull-down is enforced (which is + * the SoC default for this pin) so that LOW is read if + * the loop doesn't exist on HW (soldering issue on + * either signals). + */ + <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>, + /* + * GPIO3_D3 is routed to VCC_5V0_2 power rail through a + * voltage divider on the adapter. + * It should be HIGH if all is properly soldered. + * To guarantee that, a pull-down is enforced (which is + * the SoC default for this pin) so that LOW is read if + * the loop doesn't exist on HW (soldering issue on + * either signals). + */ + <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>, + /* + * GPIO3_D4 is routed to VCC_3V3_S3_1 power rail through + * a voltage divider on the adapter. + * It should be HIGH if all is properly soldered. + * To guarantee that, a pull-down is enforced (which is + * the SoC default for this pin) so that LOW is read if + * the loop doesn't exist on HW (soldering issue on + * either signals). + */ + <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>, + /* + * GPIO3_D5 is routed to VCC_3V3_S3_2 power rail through + * a voltage divider on the adapter. + * It should be HIGH if all is properly soldered. + * To guarantee that, a pull-down is enforced (which is + * the SoC default for this pin) so that LOW is read if + * the loop doesn't exist on HW (soldering issue on + * either signals). + */ + <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; From 2be4a4171401761cb5fb02225d8b18351f6807c0 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 10 Feb 2025 21:51:25 +0100 Subject: [PATCH 30/89] dt-bindings: arm: rockchip: Add Firefly ROC-RK3576-PC binding Add devicetree binding for the ROC-RK3576-PC SBC. The board is based on the RK3576 SoC (4*Cortex-A72 + 4*Cortex-A53). Acked-by: Rob Herring (Arm) Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250210205126.1173631-2-heiko@sntech.de --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 23293344d8eb..c5629f4da560 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -241,6 +241,11 @@ properties: - firefly,roc-rk3399-pc-plus - const: rockchip,rk3399 + - description: Firefly ROC-RK3576-PC + items: + - const: firefly,roc-rk3576-pc + - const: rockchip,rk3576 + - description: Firefly Station M2 items: - const: firefly,rk3566-roc-pc From 887ff17cdd8f088a52e2b61e71f2b6c9b9678de6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 10 Feb 2025 21:51:26 +0100 Subject: [PATCH 31/89] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC As the name implies, it is built around the RK3576 SoC with 4x Cortex-A72 cores, four Cortex-A53 cores and Mali-G52 MC3 GPU. Storage options are EMMC, SD-Card, a 2242 M.2 slot and the possibility to use UFS 2.0 storage. Video Output options are a HDMI port, a DSI connector as well as Display- Port via the TypeC connector (all of them not yet supported). Networking options are a Low-profile Gigabit Ethernet RJ45 port with Motorcomm YT8531 PHY as well as WiFi via an AMPAK AP6256 module. USB ports on the board are 1x USB 3.0 port, 1x USB 2.0 port, 1x USB Type-C and it comes with 40-pin GPIO header Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250210205126.1173631-3-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../arm64/boot/dts/rockchip/rk3576-roc-pc.dts | 736 ++++++++++++++++++ 2 files changed, 737 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index d5a6a478e69d..e4d9c48b95bb 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts new file mode 100644 index 000000000000..612b7bb0b749 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts @@ -0,0 +1,736 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Firefly Technology Co. Ltd + * Copyright (c) 2024 Heiko Stuebner + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "rk3576.dtsi" + +/ { + model = "Firefly ROC-RK3576-PC"; + compatible = "firefly,roc-rk3576-pc", "rockchip,rk3576"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Maskrom"; + linux,code = ; + press-threshold-microvolt = <17000>; + }; + }; + + adc-keys-1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <17000>; + }; + }; + + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren_h>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_device_s0>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2_ufs_vccq_s0"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_ufs_vccq2_s0"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_rtc_s5"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc5v0_device_s0: regulator-vcc5v0-device-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5vd_en>; + regulator-name = "vcc5v0_device"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb20_host1: regulator-vcc5v0-usb20-host1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_host_pwren_h>; + regulator-name = "vcc5v0_host1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_device_s0>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_1v8_s0: regulator-vcc-1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8_s0"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v0_pldo_s3"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_s0"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_ufs_s0: regulator-vcc-ufs-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_ufs_s0"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys_s5>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&gmac0 { + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim + ð0m0_tx_bus2 + ð0m0_rx_bus2 + ð0m0_rgmii_clk + ð0m0_rgmii_bus + ðm0_clk0_25m_out>; + /* Use rgmii-rxid mode to disable rx delay inside Soc */ + phy-mode = "rgmii-rxid"; + phy-handle = <&rgmii_phy0>; + tx_delay = <0x21>; + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + rgmii_phy0: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + /* Reset time is 20ms, 100ms for rtl8211f */ + reset-delay-us = <20000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <100000>; + }; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys_s5>; + vcc2-supply = <&vcc5v0_sys_s5>; + vcc3-supply = <&vcc5v0_sys_s5>; + vcc4-supply = <&vcc5v0_sys_s5>; + vcc5-supply = <&vcc5v0_sys_s5>; + vcc6-supply = <&vcc5v0_sys_s5>; + vcc7-supply = <&vcc5v0_sys_s5>; + vcc8-supply = <&vcc5v0_sys_s5>; + vcc9-supply = <&vcc5v0_sys_s5>; + vcc10-supply = <&vcc5v0_sys_s5>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys_s5>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys_s5>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + /* pc9202 watchdog@3c with enable-gpio gpio0-c3 */ + + /* hnyetek,husb311 typec-portc@4e */ + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; + interrupt-parent = <&gpio0>; + interrupts = ; + wakeup-source; + }; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int_l: rtc-int-l { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + power { + vcc5vd_en: vcc5vd-en { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + hub_reset_h: hub-reset-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb3_host_pwren_h: usb3-host-pwren-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg0_pwren_h: usb-otg0-pwren-h { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int_l: usbc0-int-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + watchdog { + wd_en: wd-en { + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>; + status = "okay"; +}; + +/* On the extension pin header */ +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m3_xfer>; + status = "okay"; +}; From 6ee0b9ad3995ee5fa229035c69013b7dd0d3634b Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli Date: Tue, 4 Feb 2025 16:35:51 +0100 Subject: [PATCH 32/89] arm64: dts: rockchip: Add rng node to RK3588 Add the RK3588's standalone hardware random number generator node to its device tree, and enable it. Signed-off-by: Nicolas Frattaroli Link: https://lore.kernel.org/r/20250204-rk3588-trng-submission-v2-6-608172b6fd91@collabora.com [changed reset-id to its numeric value while the constant makes its way through the crypto tree] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 5d0fbb6d89ec..a59c194c7479 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1948,6 +1948,14 @@ sdhci: mmc@fe2e0000 { status = "disabled"; }; + rng@fe378000 { + compatible = "rockchip,rk3588-rng"; + reg = <0x0 0xfe378000 0x0 0x200>; + interrupts = ; + clocks = <&scmi_clk SCMI_HCLK_SECURE_NS>; + resets = <&scmi_reset 48>; + }; + i2s0_8ch: i2s@fe470000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfe470000 0x0 0x1000>; From 1444eb8fed6204a2e472967637404181b47f3c4a Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 21 Feb 2025 15:04:35 +0100 Subject: [PATCH 33/89] arm64: dts: rockchip: add support for HAIKOU-LVDS-9904379 adapter for PX30 Ringneck The HAIKOU-LVDS-9904379 adapter is an adapter for PX30 Ringneck with the Haikou carrierboard. It is to be inserted in the fake PCIe slot labelled Video Connector. This adapter expects an Admatec 9904379 1024x600 LVDS display with backlight and touchscreen. An EEPROM is also found on the adapter. This adds support for this adapter on PX30 Ringneck when inserted in Haikou carrierboard. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-3-310c0b9a3909@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 5 + .../px30-ringneck-haikou-lvds-9904379.dtso | 130 ++++++++++++++++++ 2 files changed, 135 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e4d9c48b95bb..b40b82bd0722 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb @@ -191,6 +192,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb # result of the application of .dtbo and other listed overlays on top # of .dtb. +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-lvds-9904379.dtb +px30-ringneck-haikou-haikou-lvds-9904379-dtbs := px30-ringneck-haikou.dtb \ + px30-ringneck-haikou-lvds-9904379.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso new file mode 100644 index 000000000000..3fc088a5636a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * HAIKOU-LVDS-9904379 adapter for PX30 Ringneck and Haikou carrierboard. + * + * This adapter needs to be plugged in the fake PCIe connector called Video + * Connector on Haikou carrierboard. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + brightness-levels = <0 255>; + default-brightness-level = <255>; + num-interpolated-steps = <255>; + power-supply = <&vcc3v3_baseboard>; + pwms = <&pwm0 0 25000 0>; + }; + + panel { + compatible = "admatec,9904379", "panel-lvds"; + backlight = <&backlight_lvds>; + data-mapping = "vesa-24"; + height-mm = <126>; + power-supply = <&vcc3v3_baseboard>; + width-mm = <224>; + + panel-timing { + clock-frequency = <49500000>; + hactive = <1024>; + hback-porch = <90>; + hfront-porch = <90>; + hsync-len = <90>; + vactive = <600>; + vback-porch = <10>; + vfront-porch = <10>; + vsync-len = <10>; + }; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi_dphy { + status = "okay"; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + /* EEPROM and GT928 are limited to 400KHz */ + clock-frequency = <400000>; + + touchscreen@14 { + compatible = "goodix,gt928"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = ; + irq-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int &touch_rst>; + pinctrl-names = "default"; + touchscreen-inverted-x; + touchscreen-inverted-y; + AVDD28-supply = <&vcc3v3_baseboard>; + VDDIO-supply = <&vcc3v3_baseboard>; + }; + + eeprom@54 { + reg = <0x54>; + compatible = "st,24c04", "atmel,24c04"; + pagesize = <16>; + size = <512>; + vcc-supply = <&vcc3v3_baseboard>; + }; +}; + +&lvds { + status = "okay"; +}; + +&lvds_out { + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; +}; + +&pinctrl { + touch { + touch_int: touch-int { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + touch_rst: touch-rst { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; From 9f889cf1783680835d3ed401279075690b7f078a Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 21 Feb 2025 15:04:36 +0100 Subject: [PATCH 34/89] arm64: dts: rockchip: add overlay for PX30 Ringneck Haikou Video Demo adapter This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01 (https://embedded.cherry.de/product/development-kit/) for the Haikou devkit with PX30 Ringneck SoM. The Video Demo adapter is an adapter connected to the fake PCIe slot labeled "Video Connector" on the Haikou devkit. Itss main feature is a Leadtek DSI-display with touchscreen and a camera (that is not supported yet because the expected clock rate by the driver cannot be exactly reached by the clock driver). To drive these components a number of additional regulators are grouped on the adapter as well as a PCA9670 gpio-expander to provide the needed additional gpio-lines. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-4-310c0b9a3909@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 5 + .../px30-ringneck-haikou-video-demo.dtso | 190 ++++++++++++++++++ 2 files changed, 195 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index b40b82bd0722..0f7c5c55c8b8 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-video-demo.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb @@ -196,6 +197,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-lvds-9904379.dtb px30-ringneck-haikou-haikou-lvds-9904379-dtbs := px30-ringneck-haikou.dtb \ px30-ringneck-haikou-lvds-9904379.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-video-demo.dtb +px30-ringneck-haikou-haikou-video-demo-dtbs := px30-ringneck-haikou.dtb \ + px30-ringneck-haikou-video-demo.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso new file mode 100644 index 000000000000..7d9ea5aa5984 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * DEVKIT ADDON CAM-TS-A01 + * https://embedded.cherry.de/product/development-kit/ + * + * DT-overlay for the camera / DSI demo appliance for Haikou boards. + * In the flavour for use with a Ringneck system-on-module. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include +#include + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&dc_12v>; + pwms = <&pwm0 0 25000 0>; + }; + + cam_afvdd_2v8: regulator-cam-afvdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 2 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-afvdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_avdd_2v8: regulator-cam-avdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 4 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-avdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_dovdd_1v8: regulator-cam-dovdd-1v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 3 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "cam-dovdd-1v8"; + vin-supply = <&vcc1v8_video>; + }; + + cam_dvdd_1v2: regulator-cam-dvdd-1v2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "cam-dvdd-1v2"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc1v8_video: regulator-vcc1v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc1v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc2v8_video: regulator-vcc2v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc2v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + video-adapter-leds { + compatible = "gpio-leds"; + + video-adapter-led { + color = ; + gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>; + label = "video-adapter-led"; + linux,default-trigger = "none"; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "leadtek,ltk050h3148w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc1v8_video>; + reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>; + vci-supply = <&vcc2v8_video>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&dsi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + /* OV5675, GT911, DW9714 are limited to 400KHz */ + clock-frequency = <400000>; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = ; + irq-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>; + pinctrl-names = "default"; + reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc2v8_video>; + VDDIO-supply = <&vcc3v3_baseboard>; + }; + + pca9670: gpio@27 { + compatible = "nxp,pca9670"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pca9670_resetn>; + pinctrl-names = "default"; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pca9670 { + pca9670_resetn: pca9670-resetn { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; From 066a69db9db3f0c58cc8f74fab169573556f322a Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 21 Feb 2025 15:04:37 +0100 Subject: [PATCH 35/89] arm64: dts: rockchip: add overlay for RK3399 Puma Haikou Video Demo adapter This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01 (https://embedded.cherry.de/product/development-kit/) for the Haikou devkit with RK3399 Puma SoM. The Video Demo adapter is an adapter connected to the fake PCIe slot labeled "Video Connector" on the Haikou devkit. Its main feature is a Leadtek DSI-display with touchscreen and a camera (that is not supported yet because the expected clock rate by the driver cannot be exactly reached by the clock driver). To drive these components a number of additional regulators are grouped on the adapter as well as a PCA9670 gpio-expander to provide the needed additional gpio-lines. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-5-310c0b9a3909@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 5 + .../rk3399-puma-haikou-video-demo.dtso | 166 ++++++++++++++++++ 2 files changed, 171 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 0f7c5c55c8b8..a46ed20e977a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-video-demo.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb @@ -201,6 +202,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-video-demo.dtb px30-ringneck-haikou-haikou-video-demo-dtbs := px30-ringneck-haikou.dtb \ px30-ringneck-haikou-video-demo.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb +rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \ + rk3399-puma-haikou-video-demo.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso new file mode 100644 index 000000000000..0377ec860d35 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * DEVKIT ADDON CAM-TS-A01 + * https://embedded.cherry.de/product/development-kit/ + * + * DT-overlay for the camera / DSI demo appliance for Haikou boards. + * In the flavour for use with a Puma system-on-module. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include +#include + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&dc_12v>; + pwms = <&pwm0 0 25000 0>; + }; + + cam_afvdd_2v8: regulator-cam-afvdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 2 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-afvdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_avdd_2v8: regulator-cam-avdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 4 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-avdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_dovdd_1v8: regulator-cam-dovdd-1v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 3 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "cam-dovdd-1v8"; + vin-supply = <&vcc1v8_video>; + }; + + cam_dvdd_1v2: regulator-cam-dvdd-1v2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "cam-dvdd-1v2"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc1v8_video: regulator-vcc1v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc1v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc2v8_video: regulator-vcc2v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc2v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + video-adapter-leds { + compatible = "gpio-leds"; + + video-adapter-led { + color = ; + gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>; + label = "video-adapter-led"; + linux,default-trigger = "none"; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + /* OV5675, GT911, DW9714 are limited to 400KHz */ + clock-frequency = <400000>; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio1>; + interrupts = ; + irq-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>; + pinctrl-names = "default"; + reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc2v8_video>; + VDDIO-supply = <&vcc3v3_baseboard>; + }; + + pca9670: gpio@27 { + compatible = "nxp,pca9670"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pca9670_resetn>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; + }; +}; + +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "leadtek,ltk050h3148w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc1v8_video>; + reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>; + vci-supply = <&vcc2v8_video>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&pinctrl { + pca9670 { + pca9670_resetn: pca9670-resetn { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; From 8715d2eeb062f6859c252bb6c87b363230b66e9f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 10 Feb 2025 23:45:10 +0100 Subject: [PATCH 36/89] arm64: dts: rockchip: add rk3576 otp node This adds the otp node to the rk3576 soc devicetree including the individual fields we know about. Tested-by: Nicolas Frattaroli Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250210224510.1194963-7-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3576.dtsi | 39 ++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 4dde954043ef..29b47799849a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1260,6 +1260,45 @@ sdhci: mmc@2a330000 { status = "disabled"; }; + otp: otp@2a580000 { + compatible = "rockchip,rk3576-otp"; + reg = <0x0 0x2a580000 0x0 0x400>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>; + reset-names = "otp", "apb"; + + /* Data cells */ + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + otp_cpu_version: cpu-version@5 { + reg = <0x05 0x1>; + bits = <3 3>; + }; + otp_id: id@a { + reg = <0x0a 0x10>; + }; + cpub_leakage: cpub-leakage@1e { + reg = <0x1e 0x1>; + }; + cpul_leakage: cpul-leakage@1f { + reg = <0x1f 0x1>; + }; + npu_leakage: npu-leakage@20 { + reg = <0x20 0x1>; + }; + gpu_leakage: gpu-leakage@21 { + reg = <0x21 0x1>; + }; + log_leakage: log-leakage@22 { + reg = <0x22 0x1>; + }; + }; + gic: interrupt-controller@2a701000 { compatible = "arm,gic-400"; reg = <0x0 0x2a701000 0 0x10000>, From 64c80e49d0462f9757755439887f70e63019baf2 Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Tue, 18 Feb 2025 11:04:18 -0500 Subject: [PATCH 37/89] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board The board is based on the Rockchip rk3576 SoC. Acked-by: Krzysztof Kozlowski Signed-off-by: Detlev Casanova Link: https://lore.kernel.org/r/20250218160714.140709-2-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c5629f4da560..dcbadd04f7b5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -872,6 +872,11 @@ properties: - const: radxa,rock-4c-plus - const: rockchip,rk3399 + - description: Radxa ROCK 4D + items: + - const: radxa,rock-4d + - const: rockchip,rk3576 + - description: Radxa ROCK 4SE items: - const: radxa,rock-4se From a0fb7eca9c099867596cbd1a44cc740882bdcbbe Mon Sep 17 00:00:00 2001 From: Stephen Chen Date: Tue, 18 Feb 2025 11:04:19 -0500 Subject: [PATCH 38/89] arm64: dts: rockchip: Add Radxa ROCK 4D device tree The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC. The device tree adds support for basic devices: - UART - SD Card - Ethernet - USB - RTC It has 4 USB ports but only 3 are usable as the top left one is used for maskrom. It has a USB-C port that is only used for powering the board. Signed-off-by: Stephen Chen Signed-off-by: Detlev Casanova Link: https://lore.kernel.org/r/20250218160714.140709-3-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-rock-4d.dts | 689 ++++++++++++++++++ 2 files changed, 690 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index a46ed20e977a..a57dba25676b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -137,6 +137,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts new file mode 100644 index 000000000000..085feb2db6e5 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -0,0 +1,689 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include "rk3576.dtsi" + +/ { + model = "Radxa ROCK 4D"; + compatible = "radxa,rock-4d", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g &led_rgb_r>; + + power-led { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + user-led { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_12v0_dcin: regulator-vcc-12v0-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc_12v0_dcin"; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc_1v2_ufs_vccq_s0"; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_1v8_s0: regulator-vcc-1v8-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_ufs_vccq2_s0"; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_3v3_pcie: regulator-vcc-3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_pcie"; + startup-delay-us = <5000>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_rtc_s5"; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_ufs_s0"; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_5v0_device: regulator-vcc-5v0-device { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_device"; + vin-supply = <&vcc_12v0_dcin>; + }; + + vcc_5v0_host: regulator-vcc-5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_host"; + vin-supply = <&vcc_5v0_device>; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_sys"; + vin-supply = <&vcc_12v0_dcin>; + }; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim + ð0m0_tx_bus2 + ð0m0_rx_bus2 + ð0m0_rgmii_clk + ð0m0_rgmii_bus + ðm0_clk0_25m_out>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins + &rk806_dvs1_null + &rk806_dvs2_null + &rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_rgb_g: led-green-en { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-red-en { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren: pcie-pwren { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; From 62deeee28921dafdb8e55e72842e5900a57dac55 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:12 +0100 Subject: [PATCH 39/89] arm64: dts: rockchip: enable UART5 on RK3588 Tiger Haikou In its default configuration (SW2 on "UART1"), UART5 is exposed on the DB9 RS232/RS485 connector. While the same signals are also exposed on Q7_GPIO5 and Q7_GPIO6, a GPIO header, and thus could be used for other purposes, RK3399 Puma Haikou and PX30 Ringneck Haikou do enable the UART controller exposed on the DB9 connector, so let's keep consistency across our modules and enable it on RK3588 Tiger Haikou by default too. Add a comment while at it to explicit where this controller is routed to. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-1-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts index 795d8175e654..a3d8ff647839 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts @@ -310,8 +310,10 @@ &uart2 { status = "okay"; }; +/* DB9 RS232/RS485 when SW2 in "UART1" mode */ &uart5 { rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + status = "okay"; }; &usbdp_phy0 { From 64f6ad17eb44eae97d61cb35af94d897151d3ca8 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:13 +0100 Subject: [PATCH 40/89] arm64: dts: rockchip: move DDC bus from Haikou carrierboard to RK3399 Puma DTSI The DDC bus is necessarily on I2C3, that's how it's exposed by RK3399 Puma on the Q7 golden fingers, so let's move it to the SoM DTSI instead. If the carrierboard doesn't route it for some reason, /delete-property/ can be used to remove it. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-2-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 1 - arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index a60779bbbaaa..bb018562d40c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -150,7 +150,6 @@ vddd_codec: regulator-vddd-codec { }; &hdmi { - ddc-i2c-bus = <&i2c3>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 995b30a7aae0..f7548613ac46 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -389,6 +389,10 @@ vdd_gpu: regulator@60 { }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; +}; + &i2c7 { status = "okay"; clock-frequency = <400000>; From 52398b8bfa186446d19de638479dfaa4a1f57702 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:14 +0100 Subject: [PATCH 41/89] arm64: dts: rockchip: move I2C6 from Haikou carrierboard to Puma DTSI I2C6 is not exposed on Q7 golden fingers which is for routing signals to the carrierboard but on Q7 Camera connector, for routing signals to an additional adapter (e.g. Q7 Camera Demo adapter). Therefore, let's move the modification of I2C6 bus to Puma DTSI. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-3-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 4 ---- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 5 +++++ 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index bb018562d40c..06215f43336e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -189,10 +189,6 @@ sgtl5000: codec@a { }; }; -&i2c6 { - status = "okay"; - clock-frequency = <400000>; -}; &i2s2 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index f7548613ac46..f398a55408ee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -393,6 +393,11 @@ &hdmi { ddc-i2c-bus = <&i2c3>; }; +&i2c6 { + clock-frequency = <400000>; + status = "okay"; +}; + &i2c7 { status = "okay"; clock-frequency = <400000>; From f6fd2c1aa4511a4f3568c0fb45ad2f2fb36c4124 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:15 +0100 Subject: [PATCH 42/89] arm64: dts: rockchip: disable I2C6 on Puma DTSI The bus is only exposed on Q7 Camera FFC connector which accepts external adapters such as Q7 Camera Demo. The enabling of I2C6 should therefore be done in the adapter Device Tree Overlay and not in the SoM DTSI, so let's disable it by default. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-4-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index f398a55408ee..548bd7b486c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -395,7 +395,6 @@ &hdmi { &i2c6 { clock-frequency = <400000>; - status = "okay"; }; &i2c7 { From 4a77f317c2936bd9d95569a6e2b70eafda564155 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:16 +0100 Subject: [PATCH 43/89] arm64: dts: rockchip: enable I2S0 in Haikou carrierboard, not Puma DTSI I2S0 is routed to the Q7 golden fingers and, on Haikou carrierboard, to an I2S codec. Nothing aside from signal routing is done on the SoM, therefore it's the duty of the carrierboard to enable I2S0 whenever an I2S codec is present. Such is the case of the Haikou carrierboard, therefore let's migrate the enabling of this controller to the carrierboard DTS instead of the SoM DTSI. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-5-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 3 +++ arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 06215f43336e..28d24caffe12 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -189,6 +189,9 @@ sgtl5000: codec@a { }; }; +&i2s0 { + status = "okay"; +}; &i2s2 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 548bd7b486c1..399c86bcbfef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -447,7 +447,6 @@ &i2s0 { pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - status = "okay"; }; /* From ef32404f99c5155044f4903c5441167f52aeb152 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:17 +0100 Subject: [PATCH 44/89] arm64: dts: rockchip: add EEPROM found on RK3399 Puma Haikou The Haikou carrierboard has an EEPROM on LVDS_BLC_CLK/DAT which are signals that can carry either I2C or be used as HPD for eDP0/1. Only eDP0 is routed from RK3399 Puma SoM but only exposed on Haikou through the Video Connector, a fake PCIe connector. So to be able to use eDP one would need to use a Device Tree overlay. Therefore, let's default to having an EEPROM in Haikou carrierboard DTS. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-6-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 28d24caffe12..300529bdad1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -189,6 +189,16 @@ sgtl5000: codec@a { }; }; +&i2c7 { + eeprom@50 { + reg = <0x50>; + compatible = "atmel,24c01"; + pagesize = <8>; + size = <128>; + vcc-supply = <&vcc3v3_baseboard>; + }; +}; + &i2s0 { status = "okay"; }; From f65f71a4c33706146ca81822ed08319d6740d343 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:18 +0100 Subject: [PATCH 45/89] arm64: dts: rockchip: enable Ethernet in Haikou carrierboard, not Puma DTSI The signals are exposed on Q7 golden fingers but it's not a given that the carrierboard will have an Ethernet jack. So let's move the enabling of the Ethernet controller to the carrierboard DTS instead. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-7-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 300529bdad1d..f2234dabd664 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -149,6 +149,10 @@ vddd_codec: regulator-vddd-codec { }; }; +&gmac { + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 399c86bcbfef..e00fbaa8acc1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -183,7 +183,6 @@ &gmac { snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; rx_delay = <0x23>; - status = "okay"; }; &gpu { From 83c247e2bc1bb7bde2e54ab3767421e22a06ff77 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:19 +0100 Subject: [PATCH 46/89] arm64: dts: rockchip: enable I2C3 in Haikou carrierboard, not Ringneck DTSI PX30 Ringneck only exposes I2C3 as LVDS_BLC_CLK/DAT on Q7 golden fingers but nothing is on that bus on the SoM itself. Therefore, let's enable the I2C3 bus where it makes sense, in the Haikou carrierboard DTS. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-8-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts | 2 ++ arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts index e4517f47d519..16996cc6b8b6 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -154,6 +154,8 @@ sgtl5000: codec@a { }; &i2c3 { + status = "okay"; + eeprom@50 { reg = <0x50>; compatible = "atmel,24c01"; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index ae050cc6cd05..c166a9e3cc1c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -325,10 +325,6 @@ rtc_twi: rtc@6f { }; }; -&i2c3 { - status = "okay"; -}; - &i2s0_8ch { rockchip,trcm-sync-tx-only; From 5c349537e298c9657eaf48e2768b308d04523052 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Feb 2025 12:49:20 +0100 Subject: [PATCH 47/89] arm64: dts: rockchip: disable I2C2 bus by default on RK3588 Tiger RK3588 Tiger routes I2C2 signals to the Q7 Camera FFC connector (P2) but nothing on the SoM itself is on that bus, therefore it'll be up to the adapter connected to the Q7 Camera FFC connector (P2) to enable the I2C2 controller, if need be. Thus, disable it by default. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-9-5c44d1dd8658@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index 81a6a05ce13b..0ab7032924cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -173,7 +173,6 @@ &i2c1m0_xfer { &i2c2 { pinctrl-0 = <&i2c2m3_xfer>; - status = "okay"; }; &i2c2m3_xfer { From e0c0a97bc308f71b0934e3637ac545ce65195df0 Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Mon, 17 Feb 2025 06:11:42 +0000 Subject: [PATCH 48/89] dt-bindings: clock: Document clock and reset unit of RK3528 There are two types of clocks in RK3528 SoC, CRU-managed and SCMI-managed. Independent IDs are assigned to them. For the reset part, differing from previous Rockchip SoCs and downstream bindings which embeds register offsets into the IDs, gapless numbers starting from zero are used. Signed-off-by: Yao Zi Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250217061142.38480-6-ziyao@disroot.org Signed-off-by: Heiko Stuebner --- .../bindings/clock/rockchip,rk3528-cru.yaml | 64 +++ .../dt-bindings/clock/rockchip,rk3528-cru.h | 453 ++++++++++++++++++ .../dt-bindings/reset/rockchip,rk3528-cru.h | 241 ++++++++++ 3 files changed, 758 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml create mode 100644 include/dt-bindings/clock/rockchip,rk3528-cru.h create mode 100644 include/dt-bindings/reset/rockchip,rk3528-cru.h diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml new file mode 100644 index 000000000000..5a3ec902351c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3528-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3528 Clock and Reset Controller + +maintainers: + - Yao Zi + +description: | + The RK3528 clock controller generates the clock and also implements a reset + controller for SoC peripherals. For example, it provides SCLK_UART0 and + PCLK_UART0 as well as SRST_P_UART0 and SRST_S_UART0 for the first UART + module. + Each clock is assigned an identifier, consumer nodes can use it to specify + the clock. All available clock and reset IDs are defined in dt-binding + headers. + +properties: + compatible: + const: rockchip,rk3528-cru + + reg: + maxItems: 1 + + clocks: + items: + - description: External 24MHz oscillator clock + - description: > + 50MHz clock generated by PHY module, for generating GMAC0 clocks only. + + clock-names: + items: + - const: xin24m + - const: gmac0 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@ff4a0000 { + compatible = "rockchip,rk3528-cru"; + reg = <0xff4a0000 0x30000>; + clocks = <&xin24m>, <&gmac0_clk>; + clock-names = "xin24m", "gmac0"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/include/dt-bindings/clock/rockchip,rk3528-cru.h b/include/dt-bindings/clock/rockchip,rk3528-cru.h new file mode 100644 index 000000000000..55a448f5ed6d --- /dev/null +++ b/include/dt-bindings/clock/rockchip,rk3528-cru.h @@ -0,0 +1,453 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright (c) 2022 Rockchip Electronics Co. Ltd. + * Copyright (c) 2024 Yao Zi + * Author: Joseph Chen + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3528_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RK3528_H + +/* cru-clocks indices */ +#define PLL_APLL 0 +#define PLL_CPLL 1 +#define PLL_GPLL 2 +#define PLL_PPLL 3 +#define PLL_DPLL 4 +#define ARMCLK 5 +#define XIN_OSC0_HALF 6 +#define CLK_MATRIX_50M_SRC 7 +#define CLK_MATRIX_100M_SRC 8 +#define CLK_MATRIX_150M_SRC 9 +#define CLK_MATRIX_200M_SRC 10 +#define CLK_MATRIX_250M_SRC 11 +#define CLK_MATRIX_300M_SRC 12 +#define CLK_MATRIX_339M_SRC 13 +#define CLK_MATRIX_400M_SRC 14 +#define CLK_MATRIX_500M_SRC 15 +#define CLK_MATRIX_600M_SRC 16 +#define CLK_UART0_SRC 17 +#define CLK_UART0_FRAC 18 +#define SCLK_UART0 19 +#define CLK_UART1_SRC 20 +#define CLK_UART1_FRAC 21 +#define SCLK_UART1 22 +#define CLK_UART2_SRC 23 +#define CLK_UART2_FRAC 24 +#define SCLK_UART2 25 +#define CLK_UART3_SRC 26 +#define CLK_UART3_FRAC 27 +#define SCLK_UART3 28 +#define CLK_UART4_SRC 29 +#define CLK_UART4_FRAC 30 +#define SCLK_UART4 31 +#define CLK_UART5_SRC 32 +#define CLK_UART5_FRAC 33 +#define SCLK_UART5 34 +#define CLK_UART6_SRC 35 +#define CLK_UART6_FRAC 36 +#define SCLK_UART6 37 +#define CLK_UART7_SRC 38 +#define CLK_UART7_FRAC 39 +#define SCLK_UART7 40 +#define CLK_I2S0_2CH_SRC 41 +#define CLK_I2S0_2CH_FRAC 42 +#define MCLK_I2S0_2CH_SAI_SRC 43 +#define CLK_I2S3_8CH_SRC 44 +#define CLK_I2S3_8CH_FRAC 45 +#define MCLK_I2S3_8CH_SAI_SRC 46 +#define CLK_I2S1_8CH_SRC 47 +#define CLK_I2S1_8CH_FRAC 48 +#define MCLK_I2S1_8CH_SAI_SRC 49 +#define CLK_I2S2_2CH_SRC 50 +#define CLK_I2S2_2CH_FRAC 51 +#define MCLK_I2S2_2CH_SAI_SRC 52 +#define CLK_SPDIF_SRC 53 +#define CLK_SPDIF_FRAC 54 +#define MCLK_SPDIF_SRC 55 +#define DCLK_VOP_SRC0 56 +#define DCLK_VOP_SRC1 57 +#define CLK_HSM 58 +#define CLK_CORE_SRC_ACS 59 +#define CLK_CORE_SRC_PVTMUX 60 +#define CLK_CORE_SRC 61 +#define CLK_CORE 62 +#define ACLK_M_CORE_BIU 63 +#define CLK_CORE_PVTPLL_SRC 64 +#define PCLK_DBG 65 +#define SWCLKTCK 66 +#define CLK_SCANHS_CORE 67 +#define CLK_SCANHS_ACLKM_CORE 68 +#define CLK_SCANHS_PCLK_DBG 69 +#define CLK_SCANHS_PCLK_CPU_BIU 70 +#define PCLK_CPU_ROOT 71 +#define PCLK_CORE_GRF 72 +#define PCLK_DAPLITE_BIU 73 +#define PCLK_CPU_BIU 74 +#define CLK_REF_PVTPLL_CORE 75 +#define ACLK_BUS_VOPGL_ROOT 76 +#define ACLK_BUS_VOPGL_BIU 77 +#define ACLK_BUS_H_ROOT 78 +#define ACLK_BUS_H_BIU 79 +#define ACLK_BUS_ROOT 80 +#define HCLK_BUS_ROOT 81 +#define PCLK_BUS_ROOT 82 +#define ACLK_BUS_M_ROOT 83 +#define ACLK_SYSMEM_BIU 84 +#define CLK_TIMER_ROOT 85 +#define ACLK_BUS_BIU 86 +#define HCLK_BUS_BIU 87 +#define PCLK_BUS_BIU 88 +#define PCLK_DFT2APB 89 +#define PCLK_BUS_GRF 90 +#define ACLK_BUS_M_BIU 91 +#define ACLK_GIC 92 +#define ACLK_SPINLOCK 93 +#define ACLK_DMAC 94 +#define PCLK_TIMER 95 +#define CLK_TIMER0 96 +#define CLK_TIMER1 97 +#define CLK_TIMER2 98 +#define CLK_TIMER3 99 +#define CLK_TIMER4 100 +#define CLK_TIMER5 101 +#define PCLK_JDBCK_DAP 102 +#define CLK_JDBCK_DAP 103 +#define PCLK_WDT_NS 104 +#define TCLK_WDT_NS 105 +#define HCLK_TRNG_NS 106 +#define PCLK_UART0 107 +#define PCLK_DMA2DDR 108 +#define ACLK_DMA2DDR 109 +#define PCLK_PWM0 110 +#define CLK_PWM0 111 +#define CLK_CAPTURE_PWM0 112 +#define PCLK_PWM1 113 +#define CLK_PWM1 114 +#define CLK_CAPTURE_PWM1 115 +#define PCLK_SCR 116 +#define ACLK_DCF 117 +#define PCLK_INTMUX 118 +#define CLK_PPLL_I 119 +#define CLK_PPLL_MUX 120 +#define CLK_PPLL_100M_MATRIX 121 +#define CLK_PPLL_50M_MATRIX 122 +#define CLK_REF_PCIE_INNER_PHY 123 +#define CLK_REF_PCIE_100M_PHY 124 +#define ACLK_VPU_L_ROOT 125 +#define CLK_GMAC1_VPU_25M 126 +#define CLK_PPLL_125M_MATRIX 127 +#define ACLK_VPU_ROOT 128 +#define HCLK_VPU_ROOT 129 +#define PCLK_VPU_ROOT 130 +#define ACLK_VPU_BIU 131 +#define HCLK_VPU_BIU 132 +#define PCLK_VPU_BIU 133 +#define ACLK_VPU 134 +#define HCLK_VPU 135 +#define PCLK_CRU_PCIE 136 +#define PCLK_VPU_GRF 137 +#define HCLK_SFC 138 +#define SCLK_SFC 139 +#define CCLK_SRC_EMMC 140 +#define HCLK_EMMC 141 +#define ACLK_EMMC 142 +#define BCLK_EMMC 143 +#define TCLK_EMMC 144 +#define PCLK_GPIO1 145 +#define DBCLK_GPIO1 146 +#define ACLK_VPU_L_BIU 147 +#define PCLK_VPU_IOC 148 +#define HCLK_SAI_I2S0 149 +#define MCLK_SAI_I2S0 150 +#define HCLK_SAI_I2S2 151 +#define MCLK_SAI_I2S2 152 +#define PCLK_ACODEC 153 +#define MCLK_ACODEC_TX 154 +#define PCLK_GPIO3 155 +#define DBCLK_GPIO3 156 +#define PCLK_SPI1 157 +#define CLK_SPI1 158 +#define SCLK_IN_SPI1 159 +#define PCLK_UART2 160 +#define PCLK_UART5 161 +#define PCLK_UART6 162 +#define PCLK_UART7 163 +#define PCLK_I2C3 164 +#define CLK_I2C3 165 +#define PCLK_I2C5 166 +#define CLK_I2C5 167 +#define PCLK_I2C6 168 +#define CLK_I2C6 169 +#define ACLK_MAC_VPU 170 +#define PCLK_MAC_VPU 171 +#define CLK_GMAC1_RMII_VPU 172 +#define CLK_GMAC1_SRC_VPU 173 +#define PCLK_PCIE 174 +#define CLK_PCIE_AUX 175 +#define ACLK_PCIE 176 +#define HCLK_PCIE_SLV 177 +#define HCLK_PCIE_DBI 178 +#define PCLK_PCIE_PHY 179 +#define PCLK_PIPE_GRF 180 +#define CLK_PIPE_USB3OTG_COMBO 181 +#define CLK_UTMI_USB3OTG 182 +#define CLK_PCIE_PIPE_PHY 183 +#define CCLK_SRC_SDIO0 184 +#define HCLK_SDIO0 185 +#define CCLK_SRC_SDIO1 186 +#define HCLK_SDIO1 187 +#define CLK_TS_0 188 +#define CLK_TS_1 189 +#define PCLK_CAN2 190 +#define CLK_CAN2 191 +#define PCLK_CAN3 192 +#define CLK_CAN3 193 +#define PCLK_SARADC 194 +#define CLK_SARADC 195 +#define PCLK_TSADC 196 +#define CLK_TSADC 197 +#define CLK_TSADC_TSEN 198 +#define ACLK_USB3OTG 199 +#define CLK_REF_USB3OTG 200 +#define CLK_SUSPEND_USB3OTG 201 +#define ACLK_GPU_ROOT 202 +#define PCLK_GPU_ROOT 203 +#define ACLK_GPU_BIU 204 +#define PCLK_GPU_BIU 205 +#define ACLK_GPU 206 +#define CLK_GPU_PVTPLL_SRC 207 +#define ACLK_GPU_MALI 208 +#define HCLK_RKVENC_ROOT 209 +#define ACLK_RKVENC_ROOT 210 +#define PCLK_RKVENC_ROOT 211 +#define HCLK_RKVENC_BIU 212 +#define ACLK_RKVENC_BIU 213 +#define PCLK_RKVENC_BIU 214 +#define HCLK_RKVENC 215 +#define ACLK_RKVENC 216 +#define CLK_CORE_RKVENC 217 +#define HCLK_SAI_I2S1 218 +#define MCLK_SAI_I2S1 219 +#define PCLK_I2C1 220 +#define CLK_I2C1 221 +#define PCLK_I2C0 222 +#define CLK_I2C0 223 +#define CLK_UART_JTAG 224 +#define PCLK_SPI0 225 +#define CLK_SPI0 226 +#define SCLK_IN_SPI0 227 +#define PCLK_GPIO4 228 +#define DBCLK_GPIO4 229 +#define PCLK_RKVENC_IOC 230 +#define HCLK_SPDIF 231 +#define MCLK_SPDIF 232 +#define HCLK_PDM 233 +#define MCLK_PDM 234 +#define PCLK_UART1 235 +#define PCLK_UART3 236 +#define PCLK_RKVENC_GRF 237 +#define PCLK_CAN0 238 +#define CLK_CAN0 239 +#define PCLK_CAN1 240 +#define CLK_CAN1 241 +#define ACLK_VO_ROOT 242 +#define HCLK_VO_ROOT 243 +#define PCLK_VO_ROOT 244 +#define ACLK_VO_BIU 245 +#define HCLK_VO_BIU 246 +#define PCLK_VO_BIU 247 +#define HCLK_RGA2E 248 +#define ACLK_RGA2E 249 +#define CLK_CORE_RGA2E 250 +#define HCLK_VDPP 251 +#define ACLK_VDPP 252 +#define CLK_CORE_VDPP 253 +#define PCLK_VO_GRF 254 +#define PCLK_CRU 255 +#define ACLK_VOP_ROOT 256 +#define ACLK_VOP_BIU 257 +#define HCLK_VOP 258 +#define DCLK_VOP0 259 +#define DCLK_VOP1 260 +#define ACLK_VOP 261 +#define PCLK_HDMI 262 +#define CLK_SFR_HDMI 263 +#define CLK_CEC_HDMI 264 +#define CLK_SPDIF_HDMI 265 +#define CLK_HDMIPHY_TMDSSRC 266 +#define CLK_HDMIPHY_PREP 267 +#define PCLK_HDMIPHY 268 +#define HCLK_HDCP_KEY 269 +#define ACLK_HDCP 270 +#define HCLK_HDCP 271 +#define PCLK_HDCP 272 +#define HCLK_CVBS 273 +#define DCLK_CVBS 274 +#define DCLK_4X_CVBS 275 +#define ACLK_JPEG_DECODER 276 +#define HCLK_JPEG_DECODER 277 +#define ACLK_VO_L_ROOT 278 +#define ACLK_VO_L_BIU 279 +#define ACLK_MAC_VO 280 +#define PCLK_MAC_VO 281 +#define CLK_GMAC0_SRC 282 +#define CLK_GMAC0_RMII_50M 283 +#define CLK_GMAC0_TX 284 +#define CLK_GMAC0_RX 285 +#define ACLK_JPEG_ROOT 286 +#define ACLK_JPEG_BIU 287 +#define HCLK_SAI_I2S3 288 +#define MCLK_SAI_I2S3 289 +#define CLK_MACPHY 290 +#define PCLK_VCDCPHY 291 +#define PCLK_GPIO2 292 +#define DBCLK_GPIO2 293 +#define PCLK_VO_IOC 294 +#define CCLK_SRC_SDMMC0 295 +#define HCLK_SDMMC0 296 +#define PCLK_OTPC_NS 297 +#define CLK_SBPI_OTPC_NS 298 +#define CLK_USER_OTPC_NS 299 +#define CLK_HDMIHDP0 300 +#define HCLK_USBHOST 301 +#define HCLK_USBHOST_ARB 302 +#define CLK_USBHOST_OHCI 303 +#define CLK_USBHOST_UTMI 304 +#define PCLK_UART4 305 +#define PCLK_I2C4 306 +#define CLK_I2C4 307 +#define PCLK_I2C7 308 +#define CLK_I2C7 309 +#define PCLK_USBPHY 310 +#define CLK_REF_USBPHY 311 +#define HCLK_RKVDEC_ROOT 312 +#define ACLK_RKVDEC_ROOT_NDFT 313 +#define PCLK_DDRPHY_CRU 314 +#define HCLK_RKVDEC_BIU 315 +#define ACLK_RKVDEC_BIU 316 +#define ACLK_RKVDEC 317 +#define HCLK_RKVDEC 318 +#define CLK_HEVC_CA_RKVDEC 319 +#define ACLK_RKVDEC_PVTMUX_ROOT 320 +#define CLK_RKVDEC_PVTPLL_SRC 321 +#define PCLK_DDR_ROOT 322 +#define PCLK_DDR_BIU 323 +#define PCLK_DDRC 324 +#define PCLK_DDRMON 325 +#define CLK_TIMER_DDRMON 326 +#define PCLK_MSCH_BIU 327 +#define PCLK_DDR_GRF 328 +#define PCLK_DDR_HWLP 329 +#define PCLK_DDRPHY 330 +#define CLK_MSCH_BIU 331 +#define ACLK_DDR_UPCTL 332 +#define CLK_DDR_UPCTL 333 +#define CLK_DDRMON 334 +#define ACLK_DDR_SCRAMBLE 335 +#define ACLK_SPLIT 336 +#define CLK_DDRC_SRC 337 +#define CLK_DDR_PHY 338 +#define PCLK_OTPC_S 339 +#define CLK_SBPI_OTPC_S 340 +#define CLK_USER_OTPC_S 341 +#define PCLK_KEYREADER 342 +#define PCLK_BUS_SGRF 343 +#define PCLK_STIMER 344 +#define CLK_STIMER0 345 +#define CLK_STIMER1 346 +#define PCLK_WDT_S 347 +#define TCLK_WDT_S 348 +#define HCLK_TRNG_S 349 +#define HCLK_BOOTROM 350 +#define PCLK_DCF 351 +#define ACLK_SYSMEM 352 +#define HCLK_TSP 353 +#define ACLK_TSP 354 +#define CLK_CORE_TSP 355 +#define CLK_OTPC_ARB 356 +#define PCLK_OTP_MASK 357 +#define CLK_PMC_OTP 358 +#define PCLK_PMU_ROOT 359 +#define HCLK_PMU_ROOT 360 +#define PCLK_I2C2 361 +#define CLK_I2C2 362 +#define HCLK_PMU_BIU 363 +#define PCLK_PMU_BIU 364 +#define FCLK_MCU 365 +#define RTC_CLK_MCU 366 +#define PCLK_OSCCHK 367 +#define CLK_PMU_MCU_JTAG 368 +#define PCLK_PMU 369 +#define PCLK_GPIO0 370 +#define DBCLK_GPIO0 371 +#define XIN_OSC0_DIV 372 +#define CLK_DEEPSLOW 373 +#define CLK_DDR_FAIL_SAFE 374 +#define PCLK_PMU_HP_TIMER 375 +#define CLK_PMU_HP_TIMER 376 +#define CLK_PMU_32K_HP_TIMER 377 +#define PCLK_PMU_IOC 378 +#define PCLK_PMU_CRU 379 +#define PCLK_PMU_GRF 380 +#define PCLK_PMU_WDT 381 +#define TCLK_PMU_WDT 382 +#define PCLK_PMU_MAILBOX 383 +#define PCLK_SCRKEYGEN 384 +#define CLK_SCRKEYGEN 385 +#define CLK_PVTM_OSCCHK 386 +#define CLK_REFOUT 387 +#define CLK_PVTM_PMU 388 +#define PCLK_PVTM_PMU 389 +#define PCLK_PMU_SGRF 390 +#define HCLK_PMU_SRAM 391 +#define CLK_UART0 392 +#define CLK_UART1 393 +#define CLK_UART2 394 +#define CLK_UART3 395 +#define CLK_UART4 396 +#define CLK_UART5 397 +#define CLK_UART6 398 +#define CLK_UART7 399 +#define MCLK_I2S0_2CH_SAI_SRC_PRE 400 +#define MCLK_I2S1_8CH_SAI_SRC_PRE 401 +#define MCLK_I2S2_2CH_SAI_SRC_PRE 402 +#define MCLK_I2S3_8CH_SAI_SRC_PRE 403 +#define MCLK_SDPDIF_SRC_PRE 404 + +/* scmi-clocks indices */ +#define SCMI_PCLK_KEYREADER 0 +#define SCMI_HCLK_KLAD 1 +#define SCMI_PCLK_KLAD 2 +#define SCMI_HCLK_TRNG_S 3 +#define SCMI_HCLK_CRYPTO_S 4 +#define SCMI_PCLK_WDT_S 5 +#define SCMI_TCLK_WDT_S 6 +#define SCMI_PCLK_STIMER 7 +#define SCMI_CLK_STIMER0 8 +#define SCMI_CLK_STIMER1 9 +#define SCMI_PCLK_OTP_MASK 10 +#define SCMI_PCLK_OTPC_S 11 +#define SCMI_CLK_SBPI_OTPC_S 12 +#define SCMI_CLK_USER_OTPC_S 13 +#define SCMI_CLK_PMC_OTP 14 +#define SCMI_CLK_OTPC_ARB 15 +#define SCMI_CLK_CORE_TSP 16 +#define SCMI_ACLK_TSP 17 +#define SCMI_HCLK_TSP 18 +#define SCMI_PCLK_DCF 19 +#define SCMI_CLK_DDR 20 +#define SCMI_CLK_CPU 21 +#define SCMI_CLK_GPU 22 +#define SCMI_CORE_CRYPTO 23 +#define SCMI_ACLK_CRYPTO 24 +#define SCMI_PKA_CRYPTO 25 +#define SCMI_HCLK_CRYPTO 26 +#define SCMI_CORE_CRYPTO_S 27 +#define SCMI_ACLK_CRYPTO_S 28 +#define SCMI_PKA_CRYPTO_S 29 +#define SCMI_CORE_KLAD 30 +#define SCMI_ACLK_KLAD 31 +#define SCMI_HCLK_TRNG 32 + +#endif // _DT_BINDINGS_CLK_ROCKCHIP_RK3528_H diff --git a/include/dt-bindings/reset/rockchip,rk3528-cru.h b/include/dt-bindings/reset/rockchip,rk3528-cru.h new file mode 100644 index 000000000000..6b024c5f2e1c --- /dev/null +++ b/include/dt-bindings/reset/rockchip,rk3528-cru.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright (c) 2022 Rockchip Electronics Co. Ltd. + * Copyright (c) 2024 Yao Zi + * Author: Joseph Chen + */ + +#ifndef _DT_BINDINGS_RESET_ROCKCHIP_RK3528_H +#define _DT_BINDINGS_RESET_ROCKCHIP_RK3528_H + +#define SRST_CORE0_PO 0 +#define SRST_CORE1_PO 1 +#define SRST_CORE2_PO 2 +#define SRST_CORE3_PO 3 +#define SRST_CORE0 4 +#define SRST_CORE1 5 +#define SRST_CORE2 6 +#define SRST_CORE3 7 +#define SRST_NL2 8 +#define SRST_CORE_BIU 9 +#define SRST_CORE_CRYPTO 10 +#define SRST_P_DBG 11 +#define SRST_POT_DBG 12 +#define SRST_NT_DBG 13 +#define SRST_P_CORE_GRF 14 +#define SRST_P_DAPLITE_BIU 15 +#define SRST_P_CPU_BIU 16 +#define SRST_REF_PVTPLL_CORE 17 +#define SRST_A_BUS_VOPGL_BIU 18 +#define SRST_A_BUS_H_BIU 19 +#define SRST_A_SYSMEM_BIU 20 +#define SRST_A_BUS_BIU 21 +#define SRST_H_BUS_BIU 22 +#define SRST_P_BUS_BIU 23 +#define SRST_P_DFT2APB 24 +#define SRST_P_BUS_GRF 25 +#define SRST_A_BUS_M_BIU 26 +#define SRST_A_GIC 27 +#define SRST_A_SPINLOCK 28 +#define SRST_A_DMAC 29 +#define SRST_P_TIMER 30 +#define SRST_TIMER0 31 +#define SRST_TIMER1 32 +#define SRST_TIMER2 33 +#define SRST_TIMER3 34 +#define SRST_TIMER4 35 +#define SRST_TIMER5 36 +#define SRST_P_JDBCK_DAP 37 +#define SRST_JDBCK_DAP 38 +#define SRST_P_WDT_NS 39 +#define SRST_T_WDT_NS 40 +#define SRST_H_TRNG_NS 41 +#define SRST_P_UART0 42 +#define SRST_S_UART0 43 +#define SRST_PKA_CRYPTO 44 +#define SRST_A_CRYPTO 45 +#define SRST_H_CRYPTO 46 +#define SRST_P_DMA2DDR 47 +#define SRST_A_DMA2DDR 48 +#define SRST_P_PWM0 49 +#define SRST_PWM0 50 +#define SRST_P_PWM1 51 +#define SRST_PWM1 52 +#define SRST_P_SCR 53 +#define SRST_A_DCF 54 +#define SRST_P_INTMUX 55 +#define SRST_A_VPU_BIU 56 +#define SRST_H_VPU_BIU 57 +#define SRST_P_VPU_BIU 58 +#define SRST_A_VPU 59 +#define SRST_H_VPU 60 +#define SRST_P_CRU_PCIE 61 +#define SRST_P_VPU_GRF 62 +#define SRST_H_SFC 63 +#define SRST_S_SFC 64 +#define SRST_C_EMMC 65 +#define SRST_H_EMMC 66 +#define SRST_A_EMMC 67 +#define SRST_B_EMMC 68 +#define SRST_T_EMMC 69 +#define SRST_P_GPIO1 70 +#define SRST_DB_GPIO1 71 +#define SRST_A_VPU_L_BIU 72 +#define SRST_P_VPU_IOC 73 +#define SRST_H_SAI_I2S0 74 +#define SRST_M_SAI_I2S0 75 +#define SRST_H_SAI_I2S2 76 +#define SRST_M_SAI_I2S2 77 +#define SRST_P_ACODEC 78 +#define SRST_P_GPIO3 79 +#define SRST_DB_GPIO3 80 +#define SRST_P_SPI1 81 +#define SRST_SPI1 82 +#define SRST_P_UART2 83 +#define SRST_S_UART2 84 +#define SRST_P_UART5 85 +#define SRST_S_UART5 86 +#define SRST_P_UART6 87 +#define SRST_S_UART6 88 +#define SRST_P_UART7 89 +#define SRST_S_UART7 90 +#define SRST_P_I2C3 91 +#define SRST_I2C3 92 +#define SRST_P_I2C5 93 +#define SRST_I2C5 94 +#define SRST_P_I2C6 95 +#define SRST_I2C6 96 +#define SRST_A_MAC 97 +#define SRST_P_PCIE 98 +#define SRST_PCIE_PIPE_PHY 99 +#define SRST_PCIE_POWER_UP 100 +#define SRST_P_PCIE_PHY 101 +#define SRST_P_PIPE_GRF 102 +#define SRST_H_SDIO0 103 +#define SRST_H_SDIO1 104 +#define SRST_TS_0 105 +#define SRST_TS_1 106 +#define SRST_P_CAN2 107 +#define SRST_CAN2 108 +#define SRST_P_CAN3 109 +#define SRST_CAN3 110 +#define SRST_P_SARADC 111 +#define SRST_SARADC 112 +#define SRST_SARADC_PHY 113 +#define SRST_P_TSADC 114 +#define SRST_TSADC 115 +#define SRST_A_USB3OTG 116 +#define SRST_A_GPU_BIU 117 +#define SRST_P_GPU_BIU 118 +#define SRST_A_GPU 119 +#define SRST_REF_PVTPLL_GPU 120 +#define SRST_H_RKVENC_BIU 121 +#define SRST_A_RKVENC_BIU 122 +#define SRST_P_RKVENC_BIU 123 +#define SRST_H_RKVENC 124 +#define SRST_A_RKVENC 125 +#define SRST_CORE_RKVENC 126 +#define SRST_H_SAI_I2S1 127 +#define SRST_M_SAI_I2S1 128 +#define SRST_P_I2C1 129 +#define SRST_I2C1 130 +#define SRST_P_I2C0 131 +#define SRST_I2C0 132 +#define SRST_P_SPI0 133 +#define SRST_SPI0 134 +#define SRST_P_GPIO4 135 +#define SRST_DB_GPIO4 136 +#define SRST_P_RKVENC_IOC 137 +#define SRST_H_SPDIF 138 +#define SRST_M_SPDIF 139 +#define SRST_H_PDM 140 +#define SRST_M_PDM 141 +#define SRST_P_UART1 142 +#define SRST_S_UART1 143 +#define SRST_P_UART3 144 +#define SRST_S_UART3 145 +#define SRST_P_RKVENC_GRF 146 +#define SRST_P_CAN0 147 +#define SRST_CAN0 148 +#define SRST_P_CAN1 149 +#define SRST_CAN1 150 +#define SRST_A_VO_BIU 151 +#define SRST_H_VO_BIU 152 +#define SRST_P_VO_BIU 153 +#define SRST_H_RGA2E 154 +#define SRST_A_RGA2E 155 +#define SRST_CORE_RGA2E 156 +#define SRST_H_VDPP 157 +#define SRST_A_VDPP 158 +#define SRST_CORE_VDPP 159 +#define SRST_P_VO_GRF 160 +#define SRST_P_CRU 161 +#define SRST_A_VOP_BIU 162 +#define SRST_H_VOP 163 +#define SRST_D_VOP0 164 +#define SRST_D_VOP1 165 +#define SRST_A_VOP 166 +#define SRST_P_HDMI 167 +#define SRST_HDMI 168 +#define SRST_P_HDMIPHY 169 +#define SRST_H_HDCP_KEY 170 +#define SRST_A_HDCP 171 +#define SRST_H_HDCP 172 +#define SRST_P_HDCP 173 +#define SRST_H_CVBS 174 +#define SRST_D_CVBS_VOP 175 +#define SRST_D_4X_CVBS_VOP 176 +#define SRST_A_JPEG_DECODER 177 +#define SRST_H_JPEG_DECODER 178 +#define SRST_A_VO_L_BIU 179 +#define SRST_A_MAC_VO 180 +#define SRST_A_JPEG_BIU 181 +#define SRST_H_SAI_I2S3 182 +#define SRST_M_SAI_I2S3 183 +#define SRST_MACPHY 184 +#define SRST_P_VCDCPHY 185 +#define SRST_P_GPIO2 186 +#define SRST_DB_GPIO2 187 +#define SRST_P_VO_IOC 188 +#define SRST_H_SDMMC0 189 +#define SRST_P_OTPC_NS 190 +#define SRST_SBPI_OTPC_NS 191 +#define SRST_USER_OTPC_NS 192 +#define SRST_HDMIHDP0 193 +#define SRST_H_USBHOST 194 +#define SRST_H_USBHOST_ARB 195 +#define SRST_HOST_UTMI 196 +#define SRST_P_UART4 197 +#define SRST_S_UART4 198 +#define SRST_P_I2C4 199 +#define SRST_I2C4 200 +#define SRST_P_I2C7 201 +#define SRST_I2C7 202 +#define SRST_P_USBPHY 203 +#define SRST_USBPHY_POR 204 +#define SRST_USBPHY_OTG 205 +#define SRST_USBPHY_HOST 206 +#define SRST_P_DDRPHY_CRU 207 +#define SRST_H_RKVDEC_BIU 208 +#define SRST_A_RKVDEC_BIU 209 +#define SRST_A_RKVDEC 210 +#define SRST_H_RKVDEC 211 +#define SRST_HEVC_CA_RKVDEC 212 +#define SRST_REF_PVTPLL_RKVDEC 213 +#define SRST_P_DDR_BIU 214 +#define SRST_P_DDRC 215 +#define SRST_P_DDRMON 216 +#define SRST_TIMER_DDRMON 217 +#define SRST_P_MSCH_BIU 218 +#define SRST_P_DDR_GRF 219 +#define SRST_P_DDR_HWLP 220 +#define SRST_P_DDRPHY 221 +#define SRST_MSCH_BIU 222 +#define SRST_A_DDR_UPCTL 223 +#define SRST_DDR_UPCTL 224 +#define SRST_DDRMON 225 +#define SRST_A_DDR_SCRAMBLE 226 +#define SRST_A_SPLIT 227 +#define SRST_DDR_PHY 228 + +#endif // _DT_BINDINGS_RESET_ROCKCHIP_RK3528_H From 858cdcdd11cf9913756297d3869e4de0f01329ea Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Mon, 17 Feb 2025 06:11:45 +0000 Subject: [PATCH 49/89] arm64: dts: rockchip: Add clock generators for RK3528 SoC Add dt node for RK3528 clock and reset unit. Clock "gmac0_clk" is generated by internal Ethernet phy, a fixed clock node is added as a placeholder to avoid orphans. Signed-off-by: Yao Zi Link: https://lore.kernel.org/r/20250217061142.38480-9-ziyao@disroot.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 51 ++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index e58faa985aa4..37fd40377076 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -6,6 +6,7 @@ #include #include +#include / { compatible = "rockchip,rk3528"; @@ -95,6 +96,13 @@ xin24m: clock-xin24m { #clock-cells = <0>; }; + gmac0_clk: clock-gmac50m { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "gmac0"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; ranges = <0x0 0xfe000000 0x0 0xfe000000 0x0 0x2000000>; @@ -114,6 +122,49 @@ gic: interrupt-controller@fed01000 { #interrupt-cells = <3>; }; + cru: clock-controller@ff4a0000 { + compatible = "rockchip,rk3528-cru"; + reg = <0x0 0xff4a0000 0x0 0x30000>; + assigned-clocks = + <&cru XIN_OSC0_DIV>, <&cru PLL_GPLL>, + <&cru PLL_PPLL>, <&cru PLL_CPLL>, + <&cru ARMCLK>, <&cru CLK_MATRIX_250M_SRC>, + <&cru CLK_MATRIX_500M_SRC>, + <&cru CLK_MATRIX_50M_SRC>, + <&cru CLK_MATRIX_100M_SRC>, + <&cru CLK_MATRIX_150M_SRC>, + <&cru CLK_MATRIX_200M_SRC>, + <&cru CLK_MATRIX_300M_SRC>, + <&cru CLK_MATRIX_339M_SRC>, + <&cru CLK_MATRIX_400M_SRC>, + <&cru CLK_MATRIX_600M_SRC>, + <&cru CLK_PPLL_50M_MATRIX>, + <&cru CLK_PPLL_100M_MATRIX>, + <&cru CLK_PPLL_125M_MATRIX>, + <&cru ACLK_BUS_VOPGL_ROOT>; + assigned-clock-rates = + <32768>, <1188000000>, + <1000000000>, <996000000>, + <408000000>, <250000000>, + <500000000>, + <50000000>, + <100000000>, + <150000000>, + <200000000>, + <300000000>, + <340000000>, + <400000000>, + <600000000>, + <50000000>, + <100000000>, + <125000000>, + <500000000>; + clocks = <&xin24m>, <&gmac0_clk>; + clock-names = "xin24m", "gmac0"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart0: serial@ff9f0000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f0000 0x0 0x100>; From b9454434d0349223418f74fbfa7b902104da9bc5 Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Mon, 17 Feb 2025 06:11:46 +0000 Subject: [PATCH 50/89] arm64: dts: rockchip: Add UART clocks for RK3528 SoC Add missing clocks in UART nodes for RK3528 SoC. Signed-off-by: Yao Zi Link: https://lore.kernel.org/r/20250217061142.38480-10-ziyao@disroot.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index 37fd40377076..5b334690356a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -168,7 +168,8 @@ cru: clock-controller@ff4a0000 { uart0: serial@ff9f0000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f0000 0x0 0x100>; - clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -178,6 +179,8 @@ uart0: serial@ff9f0000 { uart1: serial@ff9f8000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f8000 0x0 0x100>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -187,6 +190,8 @@ uart1: serial@ff9f8000 { uart2: serial@ffa00000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xffa00000 0x0 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -195,6 +200,8 @@ uart2: serial@ffa00000 { uart3: serial@ffa08000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; reg = <0x0 0xffa08000 0x0 0x100>; reg-io-width = <4>; reg-shift = <2>; @@ -204,6 +211,8 @@ uart3: serial@ffa08000 { uart4: serial@ffa10000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xffa10000 0x0 0x100>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -213,6 +222,8 @@ uart4: serial@ffa10000 { uart5: serial@ffa18000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xffa18000 0x0 0x100>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -222,6 +233,8 @@ uart5: serial@ffa18000 { uart6: serial@ffa20000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xffa20000 0x0 0x100>; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; @@ -231,6 +244,8 @@ uart6: serial@ffa20000 { uart7: serial@ffa28000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xffa28000 0x0 0x100>; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; interrupts = ; reg-io-width = <4>; reg-shift = <2>; From a3b3b57ec92f46237b2478973aec65270f457bc2 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Sun, 23 Feb 2025 18:07:46 +0800 Subject: [PATCH 51/89] arm64: dts: rockchip: Enable USB3 OTG on rk3588s Cool Pi 4B Enable USB3 OTG and it's related PHY node. And the PHY will also be shared with the upcoming DisplayPort controller. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20250223100757.73531-1-andyshrk@163.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588s-coolpi-4b.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts index f471baca6d31..e3c6dd9b95cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -803,6 +803,14 @@ &tsadc { status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -832,6 +840,16 @@ &uart9 { pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>; }; +&usbdp_phy0 { + /* + * USBDP PHY0 is wired to a USB3 Type-A OTG connector. Additionally + * the differential pairs 0+1 and the aux channel are wired to a + * mini DP connector. + */ + rockchip,dp-lane-mux = <0 1>; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; @@ -840,6 +858,11 @@ &usb_host0_ohci { status = "okay"; }; +&usb_host0_xhci { + extcon = <&u2phy0>; + status = "okay"; +}; + &usb_host1_ehci { status = "okay"; }; From aadaa27956e3430217d9e6b8af5880e39b05b961 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Sun, 23 Feb 2025 11:31:39 +0200 Subject: [PATCH 52/89] arm64: dts: rockchip: Enable HDMI1 PHY clk provider on RK3588 Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support"), the HDMI PHY PLL can be used as an alternative and more accurate pixel clock source for VOP2 to improve display modes handling on RK3588 SoC. Add the missing #clock-cells property to allow using the clock provider functionality of HDMI1 PHY. Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-3-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index 8b2edf362ce8..ce890a3f3974 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -480,6 +480,7 @@ hdptxphy1: phy@fed70000 { reg = <0x0 0xfed70000 0x0 0x2000>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>; clock-names = "ref", "apb"; + #clock-cells = <0>; #phy-cells = <0>; resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>, <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>, From b2e668a60ed866ba960acb5310d1fb6bf81d154f Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Sun, 23 Feb 2025 11:31:40 +0200 Subject: [PATCH 53/89] arm64: dts: rockchip: Add HDMI1 PHY PLL clock source to VOP2 on RK3588 VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and more accurate pixel clock source to improve handling of display modes up to 4K@60Hz on video ports 0, 1 and 2. The HDMI1 PHY PLL clock source cannot be added directly to vop node in rk3588-base.dtsi, along with the HDMI0 related one, because HDMI1 is an optional feature and its PHY node belongs to a separate (extra) DT file. Therefore, add the HDMI1 PHY PLL clock source to VOP2 by overwriting its clocks & clock-names properties in the extra DT file. Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-4-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner --- .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index ce890a3f3974..620e8ae2a09b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -543,3 +543,24 @@ pcie30phy: phy@fee80000 { status = "disabled"; }; }; + +&vop { + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>, + <&hdptxphy0>, + <&hdptxphy1>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop", + "pll_hdmiphy0", + "pll_hdmiphy1"; +}; From 5c2d6181ae830e02856c603b8c08e80e9d419874 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Sun, 23 Feb 2025 11:31:41 +0200 Subject: [PATCH 54/89] arm64: dts: rockchip: Enable HDMI1 on rk3588-evb1 Add the necessary DT changes to enable the second HDMI output port on Rockchip RK3588 EVB1. While at it, switch the position of &vop_mmu and @vop to maintain the alphabetical order. Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-5-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-evb1-v10.dts | 42 ++++++++++++++++++- 1 file changed, 40 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 3fd0665cde2c..27a7895595ee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -132,6 +132,17 @@ hdmi0_con_in: endpoint { }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + pcie20_avdd0v85: regulator-pcie20-avdd0v85 { compatible = "regulator-fixed"; regulator-name = "pcie20_avdd0v85"; @@ -364,10 +375,30 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &i2c2 { status = "okay"; @@ -1371,11 +1402,11 @@ &usb_host1_xhci { status = "okay"; }; -&vop_mmu { +&vop { status = "okay"; }; -&vop { +&vop_mmu { status = "okay"; }; @@ -1385,3 +1416,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; From b8c6c136971c0e9750eec89f367529b2854d3a3c Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Mon, 17 Feb 2025 16:47:41 -0500 Subject: [PATCH 55/89] arm64: dts: rockchip: Add HDMI audio outputs for rk3588 For hdmi0_sound, use the simple-audio-card driver with the hdmi0 QP node as CODEC and the i2s5 device as CPU. Similarly for hdmi1_sound, the CODEC is the hdmi1 node and the CPU is i2s6, but only added in the rk3588-extra.dtsi device tree as the second TX HDMI port is not available on base versions of the SoC. The simple-audio-card,mclk-fs value is set to 128 as it is done in the downstream driver. The #sound-dai-cells value is set to 0 in the hdmi0 and hdmi1 nodes so that they can be used as audio codec nodes. Tested-by: Quentin Schulz # RK3588 Tiger Haikou Signed-off-by: Detlev Casanova Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/20250217215641.372723-3-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 17 +++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 17 +++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index a59c194c7479..d0b640c2d5f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -377,6 +377,22 @@ scmi_reset: protocol@16 { }; }; + hdmi0_sound: hdmi0-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "hdmi0"; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi0>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s5_8ch>; + }; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupts = ; @@ -1421,6 +1437,7 @@ hdmi0: hdmi@fde80000 { reset-names = "ref", "hdp"; rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index 620e8ae2a09b..a4650137b08c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -7,6 +7,22 @@ #include "rk3588-extra-pinctrl.dtsi" / { + hdmi1_sound: hdmi1-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "hdmi1"; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi1>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s6_8ch>; + }; + }; + usb_host1_xhci: usb@fc400000 { compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; reg = <0x0 0xfc400000 0x0 0x400000>; @@ -195,6 +211,7 @@ hdmi1: hdmi@fdea0000 { reset-names = "ref", "hdp"; rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { From 97aa62ed1e970bf8aa9f57e87c946a95fa3d5bef Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Mon, 17 Feb 2025 16:47:42 -0500 Subject: [PATCH 56/89] arm64: dts: rockchip: Enable HDMI audio outputs for Rock 5B HDMI audio is available on the Rock 5B HDMI TX ports. Enable it for both ports. Reviewed-by: Quentin Schulz Signed-off-by: Detlev Casanova Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/20250217215641.372723-4-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 5acec6b97a46..ceb6421234ff 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -231,6 +231,10 @@ hdmi0_out_con: endpoint { }; }; +&hdmi0_sound { + status = "okay"; +}; + &hdmi1 { pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>; @@ -249,6 +253,10 @@ hdmi1_out_con: endpoint { }; }; +&hdmi1_sound { + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -351,6 +359,14 @@ i2s0_8ch_p0_0: endpoint { }; }; +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + &package_thermal { polling-delay = <1000>; From 3eac9319af62dbc56d1f06fcb240e4a092fa5b2f Mon Sep 17 00:00:00 2001 From: Jianfeng Liu Date: Tue, 25 Feb 2025 11:08:48 +0800 Subject: [PATCH 57/89] arm64: dts: rockchip: add hdmi1 support to ROCK 5 ITX Enable the HDMI port next to ethernet port. Signed-off-by: Jianfeng Liu Link: https://lore.kernel.org/r/20250225030904.2813023-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-rock-5-itx.dts | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts index 6d68f70284e4..253b23ea9fba 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -11,6 +11,7 @@ #include #include #include +#include #include "dt-bindings/usb/pd.h" #include "rk3588.dtsi" @@ -72,6 +73,17 @@ hdd-led2 { }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + /* Unnamed gated oscillator: 100MHz,3.3V,3225 */ pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator { compatible = "gated-fixed-clock"; @@ -261,6 +273,28 @@ &gpu { status = "okay"; }; +&hdmi1 { + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdptxphy1 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -1209,3 +1243,18 @@ &usbdp_phy1 { rockchip,dp-lane-mux = <2 3>; status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; From 6864a176140a03cfc108a27b869814140a022053 Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Sat, 22 Feb 2025 13:33:28 -0600 Subject: [PATCH 58/89] arm64: dts: rockchip: Adapt to differences between Orange Pi 5 Max and Ultra The Orange Pi 5 Plus and Orange Pi 5 Max have 2SK3018s attached to the PWM LEDs. The Orange Pi 5 Ultra does not, and thus needs the PWM polarity inverted. Also remove the model/compatible from the dtsi. It should be at the board level only. Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board") Signed-off-by: Jimmy Hon Link: https://lore.kernel.org/r/20250222193332.1761-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi | 9 --------- arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts | 8 ++++++++ 2 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi index 87090cb98020..6e4dcd8fff26 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi @@ -7,9 +7,6 @@ #include "rk3588-orangepi-5.dtsi" / { - model = "Xunlong Orange Pi 5 Max"; - compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; - vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -62,15 +59,9 @@ &hym8563 { &led_blue_pwm { /* PWM_LED1 */ - pwms = <&pwm4 0 25000 0>; status = "okay"; }; -&led_green_pwm { - /* PWM_LED2 */ - pwms = <&pwm5 0 25000 0>; -}; - /* phy2 */ &pcie2x1l1 { reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index 26421ca7843b..be8cc96b5308 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -77,6 +77,14 @@ &hdptxphy1 { status = "okay"; }; +&led_blue_pwm { + pwms = <&pwm4 0 25000 0>; +}; + +&led_green_pwm { + pwms = <&pwm5 0 25000 0>; +}; + &pinctrl { usb { From f36f2ae1fede87ca6223b5bda33835bd931324ce Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Sat, 22 Feb 2025 13:33:29 -0600 Subject: [PATCH 59/89] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon Reviewed-by: "Rob Herring (Arm)" Link: https://lore.kernel.org/r/20250222193332.1761-3-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index dcbadd04f7b5..eb89c33d81e4 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1151,11 +1151,12 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Max/Plus + - description: Xunlong Orange Pi 5 Max/Plus/Ultra items: - enum: - xunlong,orangepi-5-max - xunlong,orangepi-5-plus + - xunlong,orangepi-5-ultra - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS From 3df28b6fda8f245dc725af78780f75d5f1bc079c Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Sat, 22 Feb 2025 13:33:30 -0600 Subject: [PATCH 60/89] arm64: dts: rockchip: Add Orange Pi 5 Ultra board The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI1 - HDMI IN the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon Tested-By: Johannes Erdfelt Link: https://lore.kernel.org/r/20250222193332.1761-4-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-orangepi-5-ultra.dts | 33 +++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index a57dba25676b..3c4753bc87cd 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts new file mode 100644 index 000000000000..c17b907df1c0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3588-orangepi-5-compact.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Ultra"; + compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588"; +}; + +&led_blue_pwm { + pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>; +}; + +&led_green_pwm { + pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>; +}; + +&pinctrl { + usb { + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vcc5v0_usb30_otg { + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; +}; From efdc4018f3c98967e0145f790329a8934f936a7e Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Sat, 22 Feb 2025 13:33:31 -0600 Subject: [PATCH 61/89] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Ultra Enable the only HDMI output port on the Orange Pi 5 Ultra Signed-off-by: Jimmy Hon Tested-By: Johannes Erdfelt Link: https://lore.kernel.org/r/20250222193332.1761-5-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- .../dts/rockchip/rk3588-orangepi-5-ultra.dts | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts index c17b907df1c0..489eb5b3c25f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -5,11 +5,46 @@ #include #include #include +#include #include "rk3588-orangepi-5-compact.dtsi" / { model = "Xunlong Orange Pi 5 Ultra"; compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588"; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; +}; + +&hdmi1 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdptxphy1 { + status = "okay"; }; &led_blue_pwm { @@ -31,3 +66,10 @@ usb_otg_pwren: usb-otg-pwren { &vcc5v0_usb30_otg { gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; }; + +&vp0 { + vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp0>; + }; +}; From 254324dbe364fb058279486767fa82cd2456595d Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Sat, 22 Feb 2025 13:33:32 -0600 Subject: [PATCH 62/89] arm64: dts: rockchip: Enable HDMI1 audio output for Orange Pi 5 Ultra HDMI audio is available on the Orange Pi 5 Ultra HDMI1 TX port. Signed-off-by: Jimmy Hon Link: https://lore.kernel.org/r/20250222193332.1761-6-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts index 489eb5b3c25f..f8c6c080e418 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -43,10 +43,18 @@ hdmi1_out_con: endpoint { }; }; +&hdmi1_sound { + status = "okay"; +}; + &hdptxphy1 { status = "okay"; }; +&i2s6_8ch { + status = "okay"; +}; + &led_blue_pwm { pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>; }; From f94500eb7328b35f3d0927635b1aba26c85ea4b0 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Thu, 20 Feb 2025 19:58:11 +0100 Subject: [PATCH 63/89] arm64: dts: rockchip: Add GPU power domain regulator dependency for RK3588 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enabling the GPU power domain requires that the GPU regulator is enabled. The regulator is enabled at boot time, but gets disabled automatically when there are no users. This means the system might run into a failure state hanging the whole system for the following use cases: * if the GPU driver is being probed late (e.g. build as a module and firmware is not in initramfs), the regulator might already have been disabled. In that case the power domain is enabled before the regulator. * unbinding the GPU driver will disable the PM domain and the regulator. When the driver is bound again, the PM domain will be enabled before the regulator and error appears. Avoid this by adding an explicit regulator dependency to the power domain. Tested-by: Heiko Stuebner Reported-by: Adrián Martínez Larumbe Tested-by: Adrian Larumbe # On Rock 5B Signed-off-by: Sebastian Reichel Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-8-a4f9c24e5b81@kernel.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 4 ++++ arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 4 ++++ 30 files changed, 117 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi index a3138d2d384c..e44125e9a8fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi @@ -114,6 +114,10 @@ regulator-state-mem { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &saradc { vref-supply = <&avcc_1v8_s0>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index b89888fe5d46..6a0fffaa26ee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -318,6 +318,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index d0b640c2d5f8..79bcc90195fa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -875,7 +875,7 @@ power-domain@RK3588_PD_NPU2 { }; }; /* These power domains are grouped by VD_GPU */ - power-domain@RK3588_PD_GPU { + pd_gpu: power-domain@RK3588_PD_GPU { reg = ; clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi index 71ed680621b8..cc37f082adea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi @@ -277,6 +277,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi index 5e72d0eff0e0..8a783dc64c0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi @@ -126,6 +126,10 @@ regulator-state-mem { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { leds { led_user_en: led_user_en { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 27a7895595ee..91021818eb5e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -550,6 +550,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { audio { hp_detect: headphone-detect { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi index 390051317389..4331cdc70f97 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi @@ -205,6 +205,10 @@ regulator-state-mem { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { leds { led_rgb_b: led-rgb-b { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi index 42c523b553c9..80e16ea4154c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi @@ -108,6 +108,10 @@ regulator-state-mem { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &sdhci { bus-width = <8>; no-sdio; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi index e3a9598b99fc..1af0a30866f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi @@ -256,6 +256,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { gpio-leds { led_sys_pin: led-sys-pin { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts index a0e685b55d21..73d8ce4fde2b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts @@ -334,6 +334,10 @@ wifi: wifi@0,0 { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index ef56380530f9..2975fbb08dfe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -451,6 +451,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { emmc { emmc_reset: emmc-reset { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index 0d9b5020acc0..bbe500cc924b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -565,6 +565,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { gpio-leds { sys_led_pin: sys-led-pin { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts index 1c0851b45eb8..fbe1d5c06d90 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts @@ -312,6 +312,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { pcie2 { pcie2_0_rst: pcie2-0-rst { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index a98e804a0949..261655c7ccbf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -348,6 +348,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &saradc { vref-supply = <&vcc_1v8_s0>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index 088cfade6f6f..b46abdc27c71 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -347,6 +347,10 @@ rgmii_phy: ethernet-phy@1 { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts index 253b23ea9fba..67b886329248 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -598,6 +598,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { rtc_int: rtc-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index ceb6421234ff..0208fc0fbe4f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -425,6 +425,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index 0ab7032924cf..ff91a8485431 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -335,6 +335,10 @@ &pcie3x4 { reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { emmc { emmc_reset: emmc-reset { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts index 3cbee5b97470..5a428e00ab93 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts @@ -289,6 +289,10 @@ rgmii_phy: ethernet-phy@1 { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { rtl8211f { rtl8211f_rst: rtl8211f-rst { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 6bc46734cc14..711ac4f2c7cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -287,6 +287,10 @@ &pcie3x4 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { fan { fan_int: fan-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts index e3c6dd9b95cf..8f00e0444c00 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -361,6 +361,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts index bc4077575beb..5b3de53630c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts @@ -340,6 +340,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { audio { hp_detect: headphone-detect { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index 812bba0aef1a..8f70c00a46d3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -675,6 +675,10 @@ &pcie2x1l1 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { audio-amplifier { headphone_amplifier_en: headphone-amplifier-en { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 74a4f03e05e3..80a8dca4d6a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -455,6 +455,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { bluetooth-pins { bt_reset: bt-reset { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts index ac48e7fd3923..88a5e822ed17 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -233,6 +233,10 @@ hym8563: rtc@51 { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { vdd_sd { vdd_sd_en: vdd-sd-en { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index cd47969fadba..fbf062ec3bf1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -359,6 +359,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { gpio-key { key1_pin: key1-pin { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts index 1463bd36b1b2..a72063c55140 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts @@ -433,6 +433,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { lcd { lcd_pwren: lcd-pwren { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi index 9e16960b8705..be0234d2257d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi @@ -365,6 +365,10 @@ rgmii_phy1: ethernet-phy@1 { }; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 676cc4fec269..f894742b1ebe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -359,6 +359,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { leds { io_led: io-led { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index ef8ce10d8f50..dd7317bab613 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -455,6 +455,10 @@ &pcie2x1l2 { status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { leds { led_pins: led-pins { From c55c9e91d1643493d0434f246917aea7a2653e0f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 28 Feb 2025 16:08:53 +0100 Subject: [PATCH 64/89] arm64: dts: rockchip: add usb typec host support to rk3588-jaguar Jaguar has two type-c ports connected to fusb302 controllers that can work both in host and device mode and can also run in display-port altmode. While these ports can work in dual-role data mode, they do not support powering the device itself as power-sink. This causes issues because the current infrastructure does not cope well with dual-role data without dual-role power. So add the necessary nodes for the type-c controllers as well as enable the relevant core usb nodes. So far host modes works reliably, but device-mode does not. So devicemode needs more investigation. Signed-off-by: Heiko Stuebner Tested-by: Quentin Schulz Reviewed-by: Quentin Schulz Link: https://lore.kernel.org/r/20250228150853.329175-1-heiko@sntech.de Signed-off-by: Heiko Stuebner --- .../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 218 ++++++++++++++++++ 1 file changed, 218 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index 2975fbb08dfe..952ea4e73b15 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -333,6 +333,56 @@ rtc_twi: rtc@6f { }; }; + typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio4>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&cc_int1>; + vbus-supply = <&vcc_5v0_usb_c1>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USBC-1 P11"; + power-role = "source"; + self-powered; + source-pdos = + ; + vbus-supply = <&vcc_5v0_usb_c1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_xhci_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_ss: endpoint { + remote-endpoint = <&usbdp_phy0_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_typec_sbu>; + }; + }; + }; + }; + }; + vdd_npu_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; @@ -394,6 +444,56 @@ &i2c8 { pinctrl-0 = <&i2c8m2_xfer>; status = "okay"; + typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio4>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&cc_int2>; + vbus-supply = <&vcc_5v0_usb_c2>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USBC-2 P12"; + power-role = "source"; + self-powered; + source-pdos = + ; + vbus-supply = <&vcc_5v0_usb_c2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc1_hs: endpoint { + remote-endpoint = <&usb_host1_xhci_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + + usbc1_ss: endpoint { + remote-endpoint = <&usbdp_phy1_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + + usbc1_sbu: endpoint { + remote-endpoint = <&usbdp_phy1_typec_sbu>; + }; + }; + }; + }; + }; + vdd_cpu_big0_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; @@ -487,6 +587,26 @@ pcie30x4_waken_m0: pcie30x4-waken-m0 { rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>; }; }; + + usb3 { + cc_int1: cc-int1 { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cc_int2: cc-int2 { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + typec0_sbu_dc_pins: typec0-sbu-dc-pins { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + typec1_sbu_dc_pins: typec1-sbu-dc-pins { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &saradc { @@ -855,6 +975,24 @@ &tsadc { status = "okay"; }; +/* USB-C P11 connector */ +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +/* USB-C P12 connector */ +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -897,6 +1035,56 @@ &uart7 { status = "okay"; }; +/* Type-C on P11 */ +&usbdp_phy0 { + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&typec0_sbu_dc_pins>; + sbu1-dc-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU1_DC */ + sbu2-dc-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU2_DC */ + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_typec_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_ss>; + }; + + usbdp_phy0_typec_sbu: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc0_sbu>; + }; + }; +}; + +/* Type-C on P12 */ +&usbdp_phy1 { + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&typec1_sbu_dc_pins>; + sbu1-dc-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU1_DC */ + sbu2-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU2_DC */ + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy1_typec_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc1_ss>; + }; + + usbdp_phy1_typec_sbu: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc1_sbu>; + }; + }; +}; + /* host0 on P10 USB-A */ &usb_host0_ehci { status = "okay"; @@ -907,6 +1095,36 @@ &usb_host0_ohci { status = "okay"; }; +/* host0 on P11 USB-C */ +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usb_host0_xhci_drd_sw: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; +}; + +/* host1 on P12 USB-C */ +&usb_host1_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usb_host1_xhci_drd_sw: endpoint { + remote-endpoint = <&usbc1_hs>; + }; + }; +}; + /* host1 on M.2 E-key */ &usb_host1_ehci { status = "okay"; From ac32ad07a97648eb8330b2c4cb840b0ef46903ae Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Fri, 28 Feb 2025 06:40:07 +0000 Subject: [PATCH 65/89] dt-bindings: soc: rockchip: Add RK3528 ioc grf syscon The GPIO is accessible via ioc grf syscon registers on RK3528. Add compatible string for RK3528 ioc grf syscon. Signed-off-by: Jonas Karlman Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20250228064024.3200000-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 61f38b68a4a3..b4ed4cb555bd 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3528-ioc-grf - rockchip,rk3566-pipe-grf - rockchip,rk3568-pcie3-phy-grf - rockchip,rk3568-pipe-grf From a31fad19ae39ea27b5068e3b02bcbf30a905339b Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Fri, 28 Feb 2025 06:40:10 +0000 Subject: [PATCH 66/89] arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528 Add pinctrl and gpio nodes for RK3528 and import rk3528-pinctrl.dtsi from vendor linux-6.1-stan-rkr5 kernel with the hdmi-pins-idle node removed due to missing label reference to pcfg_output_low_pull_down. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250228064024.3200000-5-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3528-pinctrl.dtsi | 1397 +++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3528.dtsi | 82 + 2 files changed, 1479 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi new file mode 100644 index 000000000000..ea051362fb26 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi @@ -0,0 +1,1397 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + */ + +#include +#include "rockchip-pinconf.dtsi" + +/* + * This file is auto generated by pin2dts tool, please keep these code + * by adding changes at end of this file. + */ +&pinctrl { + arm { + /omit-if-no-ref/ + arm_pins: arm-pins { + rockchip,pins = + /* arm_avs */ + <4 RK_PC4 3 &pcfg_pull_none>; + }; + }; + + clk { + /omit-if-no-ref/ + clkm0_32k_out: clkm0-32k-out { + rockchip,pins = + /* clkm0_32k_out */ + <3 RK_PC3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + clkm1_32k_out: clkm1-32k-out { + rockchip,pins = + /* clkm1_32k_out */ + <1 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + emmc { + /omit-if-no-ref/ + emmc_rstnout: emmc-rstnout { + rockchip,pins = + /* emmc_rstn */ + <1 RK_PD6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + emmc_bus8: emmc-bus8 { + rockchip,pins = + /* emmc_d0 */ + <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d1 */ + <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d2 */ + <1 RK_PC6 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d3 */ + <1 RK_PC7 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d4 */ + <1 RK_PD0 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d5 */ + <1 RK_PD1 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d6 */ + <1 RK_PD2 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d7 */ + <1 RK_PD3 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_clk: emmc-clk { + rockchip,pins = + /* emmc_clk */ + <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_cmd: emmc-cmd { + rockchip,pins = + /* emmc_cmd */ + <1 RK_PD4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_strb: emmc-strb { + rockchip,pins = + /* emmc_strb */ + <1 RK_PD7 1 &pcfg_pull_none>; + }; + }; + + eth { + /omit-if-no-ref/ + eth_pins: eth-pins { + rockchip,pins = + /* eth_clk_25m_out */ + <3 RK_PB5 2 &pcfg_pull_none_drv_level_2>; + }; + }; + + fephy { + /omit-if-no-ref/ + fephym0_led_dpx: fephym0-led_dpx { + rockchip,pins = + /* fephy_led_dpx_m0 */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fephym0_led_link: fephym0-led_link { + rockchip,pins = + /* fephy_led_link_m0 */ + <4 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fephym0_led_spd: fephym0-led_spd { + rockchip,pins = + /* fephy_led_spd_m0 */ + <4 RK_PB7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fephym1_led_dpx: fephym1-led_dpx { + rockchip,pins = + /* fephy_led_dpx_m1 */ + <2 RK_PA4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fephym1_led_link: fephym1-led_link { + rockchip,pins = + /* fephy_led_link_m1 */ + <2 RK_PA6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fephym1_led_spd: fephym1-led_spd { + rockchip,pins = + /* fephy_led_spd_m1 */ + <2 RK_PA5 5 &pcfg_pull_none>; + }; + }; + + fspi { + /omit-if-no-ref/ + fspi_pins: fspi-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD5 2 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PC4 2 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PC5 2 &pcfg_pull_none>, + /* fspi_d2 */ + <1 RK_PC6 2 &pcfg_pull_none>, + /* fspi_d3 */ + <1 RK_PC7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_csn0: fspi-csn0 { + rockchip,pins = + /* fspi_csn0 */ + <1 RK_PD0 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + fspi_csn1: fspi-csn1 { + rockchip,pins = + /* fspi_csn1 */ + <1 RK_PD1 2 &pcfg_pull_none>; + }; + }; + + gpu { + /omit-if-no-ref/ + gpu_pins: gpu-pins { + rockchip,pins = + /* gpu_avs */ + <4 RK_PC3 3 &pcfg_pull_none>; + }; + }; + + hdmi { + /omit-if-no-ref/ + hdmi_pins: hdmi-pins { + rockchip,pins = + /* hdmi_tx_cec */ + <0 RK_PA3 1 &pcfg_pull_none>, + /* hdmi_tx_hpd */ + <0 RK_PA2 1 &pcfg_pull_none>, + /* hdmi_tx_scl */ + <0 RK_PA4 1 &pcfg_pull_none>, + /* hdmi_tx_sda */ + <0 RK_PA5 1 &pcfg_pull_none>; + }; + }; + + hsm { + /omit-if-no-ref/ + hsmm0_pins: hsmm0-pins { + rockchip,pins = + /* hsm_clk_out_m0 */ + <2 RK_PA2 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hsmm1_pins: hsmm1-pins { + rockchip,pins = + /* hsm_clk_out_m1 */ + <1 RK_PA4 3 &pcfg_pull_none>; + }; + }; + + i2c0 { + /omit-if-no-ref/ + i2c0m0_xfer: i2c0m0-xfer { + rockchip,pins = + /* i2c0_scl_m0 */ + <4 RK_PC4 2 &pcfg_pull_none_smt>, + /* i2c0_sda_m0 */ + <4 RK_PC3 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c0m1_xfer: i2c0m1-xfer { + rockchip,pins = + /* i2c0_scl_m1 */ + <4 RK_PA1 2 &pcfg_pull_none_smt>, + /* i2c0_sda_m1 */ + <4 RK_PA0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + /omit-if-no-ref/ + i2c1m0_xfer: i2c1m0-xfer { + rockchip,pins = + /* i2c1_scl_m0 */ + <4 RK_PA3 2 &pcfg_pull_none_smt>, + /* i2c1_sda_m0 */ + <4 RK_PA2 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c1m1_xfer: i2c1m1-xfer { + rockchip,pins = + /* i2c1_scl_m1 */ + <4 RK_PC5 4 &pcfg_pull_none_smt>, + /* i2c1_sda_m1 */ + <4 RK_PC6 4 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + /omit-if-no-ref/ + i2c2m0_xfer: i2c2m0-xfer { + rockchip,pins = + /* i2c2_scl_m0 */ + <0 RK_PA4 2 &pcfg_pull_none_smt>, + /* i2c2_sda_m0 */ + <0 RK_PA5 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = + /* i2c2_scl_m1 */ + <1 RK_PA5 3 &pcfg_pull_none_smt>, + /* i2c2_sda_m1 */ + <1 RK_PA6 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + /omit-if-no-ref/ + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + /* i2c3_scl_m0 */ + <1 RK_PA0 2 &pcfg_pull_none_smt>, + /* i2c3_sda_m0 */ + <1 RK_PA1 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + /* i2c3_scl_m1 */ + <3 RK_PC1 5 &pcfg_pull_none_smt>, + /* i2c3_sda_m1 */ + <3 RK_PC3 5 &pcfg_pull_none_smt>; + }; + }; + + i2c4 { + /omit-if-no-ref/ + i2c4_xfer: i2c4-xfer { + rockchip,pins = + /* i2c4_scl */ + <2 RK_PA0 4 &pcfg_pull_none_smt>, + /* i2c4_sda */ + <2 RK_PA1 4 &pcfg_pull_none_smt>; + }; + }; + + i2c5 { + /omit-if-no-ref/ + i2c5m0_xfer: i2c5m0-xfer { + rockchip,pins = + /* i2c5_scl_m0 */ + <1 RK_PB2 3 &pcfg_pull_none_smt>, + /* i2c5_sda_m0 */ + <1 RK_PB3 3 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c5m1_xfer: i2c5m1-xfer { + rockchip,pins = + /* i2c5_scl_m1 */ + <1 RK_PD2 3 &pcfg_pull_none_smt>, + /* i2c5_sda_m1 */ + <1 RK_PD3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c6 { + /omit-if-no-ref/ + i2c6m0_xfer: i2c6m0-xfer { + rockchip,pins = + /* i2c6_scl_m0 */ + <3 RK_PB2 5 &pcfg_pull_none_smt>, + /* i2c6_sda_m0 */ + <3 RK_PB3 5 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c6m1_xfer: i2c6m1-xfer { + rockchip,pins = + /* i2c6_scl_m1 */ + <1 RK_PD4 3 &pcfg_pull_none_smt>, + /* i2c6_sda_m1 */ + <1 RK_PD7 3 &pcfg_pull_none_smt>; + }; + }; + + i2c7 { + /omit-if-no-ref/ + i2c7_xfer: i2c7-xfer { + rockchip,pins = + /* i2c7_scl */ + <2 RK_PA5 4 &pcfg_pull_none_smt>, + /* i2c7_sda */ + <2 RK_PA6 4 &pcfg_pull_none_smt>; + }; + }; + + i2s0 { + /omit-if-no-ref/ + i2s0m0_lrck: i2s0m0-lrck { + rockchip,pins = + /* i2s0_lrck_m0 */ + <3 RK_PB6 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m0_mclk: i2s0m0-mclk { + rockchip,pins = + /* i2s0_mclk_m0 */ + <3 RK_PB4 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m0_sclk: i2s0m0-sclk { + rockchip,pins = + /* i2s0_sclk_m0 */ + <3 RK_PB5 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m0_sdi: i2s0m0-sdi { + rockchip,pins = + /* i2s0m0_sdi */ + <3 RK_PB7 1 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2s0m0_sdo: i2s0m0-sdo { + rockchip,pins = + /* i2s0m0_sdo */ + <3 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0m1_lrck: i2s0m1-lrck { + rockchip,pins = + /* i2s0_lrck_m1 */ + <1 RK_PB6 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m1_mclk: i2s0m1-mclk { + rockchip,pins = + /* i2s0_mclk_m1 */ + <1 RK_PB4 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m1_sclk: i2s0m1-sclk { + rockchip,pins = + /* i2s0_sclk_m1 */ + <1 RK_PB5 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s0m1_sdi: i2s0m1-sdi { + rockchip,pins = + /* i2s0m1_sdi */ + <1 RK_PB7 1 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2s0m1_sdo: i2s0m1-sdo { + rockchip,pins = + /* i2s0m1_sdo */ + <1 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s1 { + /omit-if-no-ref/ + i2s1_lrck: i2s1-lrck { + rockchip,pins = + /* i2s1_lrck */ + <4 RK_PA6 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s1_mclk: i2s1-mclk { + rockchip,pins = + /* i2s1_mclk */ + <4 RK_PA4 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s1_sclk: i2s1-sclk { + rockchip,pins = + /* i2s1_sclk */ + <4 RK_PA5 1 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2s1_sdi0: i2s1-sdi0 { + rockchip,pins = + /* i2s1_sdi0 */ + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdi1: i2s1-sdi1 { + rockchip,pins = + /* i2s1_sdi1 */ + <4 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdi2: i2s1-sdi2 { + rockchip,pins = + /* i2s1_sdi2 */ + <4 RK_PA3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdi3: i2s1-sdi3 { + rockchip,pins = + /* i2s1_sdi3 */ + <4 RK_PA2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdo0: i2s1-sdo0 { + rockchip,pins = + /* i2s1_sdo0 */ + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdo1: i2s1-sdo1 { + rockchip,pins = + /* i2s1_sdo1 */ + <4 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdo2: i2s1-sdo2 { + rockchip,pins = + /* i2s1_sdo2 */ + <4 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1_sdo3: i2s1-sdo3 { + rockchip,pins = + /* i2s1_sdo3 */ + <4 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + jtag { + /omit-if-no-ref/ + jtagm0_pins: jtagm0-pins { + rockchip,pins = + /* jtag_cpu_tck_m0 */ + <2 RK_PA2 2 &pcfg_pull_none>, + /* jtag_cpu_tms_m0 */ + <2 RK_PA3 2 &pcfg_pull_none>, + /* jtag_mcu_tck_m0 */ + <2 RK_PA4 2 &pcfg_pull_none>, + /* jtag_mcu_tms_m0 */ + <2 RK_PA5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + jtagm1_pins: jtagm1-pins { + rockchip,pins = + /* jtag_cpu_tck_m1 */ + <4 RK_PD0 2 &pcfg_pull_none>, + /* jtag_cpu_tms_m1 */ + <4 RK_PC7 2 &pcfg_pull_none>, + /* jtag_mcu_tck_m1 */ + <4 RK_PD0 3 &pcfg_pull_none>, + /* jtag_mcu_tms_m1 */ + <4 RK_PC7 3 &pcfg_pull_none>; + }; + }; + + pcie { + /omit-if-no-ref/ + pciem0_pins: pciem0-pins { + rockchip,pins = + /* pcie_clkreqn_m0 */ + <3 RK_PA6 5 &pcfg_pull_none>, + /* pcie_perstn_m0 */ + <3 RK_PB0 5 &pcfg_pull_none>, + /* pcie_waken_m0 */ + <3 RK_PA7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pciem1_pins: pciem1-pins { + rockchip,pins = + /* pcie_clkreqn_m1 */ + <1 RK_PA0 4 &pcfg_pull_none>, + /* pcie_perstn_m1 */ + <1 RK_PA2 4 &pcfg_pull_none>, + /* pcie_waken_m1 */ + <1 RK_PA1 4 &pcfg_pull_none>; + }; + }; + + pdm { + /omit-if-no-ref/ + pdm_clk0: pdm-clk0 { + rockchip,pins = + /* pdm_clk0 */ + <4 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm_clk1: pdm-clk1 { + rockchip,pins = + /* pdm_clk1 */ + <4 RK_PA4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm_sdi0: pdm-sdi0 { + rockchip,pins = + /* pdm_sdi0 */ + <4 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm_sdi1: pdm-sdi1 { + rockchip,pins = + /* pdm_sdi1 */ + <4 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm_sdi2: pdm-sdi2 { + rockchip,pins = + /* pdm_sdi2 */ + <4 RK_PB3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm_sdi3: pdm-sdi3 { + rockchip,pins = + /* pdm_sdi3 */ + <4 RK_PC1 3 &pcfg_pull_none>; + }; + }; + + pmu { + /omit-if-no-ref/ + pmu_pins: pmu-pins { + rockchip,pins = + /* pmu_debug */ + <4 RK_PA0 4 &pcfg_pull_none>; + }; + }; + + pwm0 { + /omit-if-no-ref/ + pwm0m0_pins: pwm0m0-pins { + rockchip,pins = + /* pwm0_m0 */ + <4 RK_PC3 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm0m1_pins: pwm0m1-pins { + rockchip,pins = + /* pwm0_m1 */ + <1 RK_PA2 5 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm1 { + /omit-if-no-ref/ + pwm1m0_pins: pwm1m0-pins { + rockchip,pins = + /* pwm1_m0 */ + <4 RK_PC4 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm1m1_pins: pwm1m1-pins { + rockchip,pins = + /* pwm1_m1 */ + <1 RK_PA3 4 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm2 { + /omit-if-no-ref/ + pwm2m0_pins: pwm2m0-pins { + rockchip,pins = + /* pwm2_m0 */ + <4 RK_PC5 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm2m1_pins: pwm2m1-pins { + rockchip,pins = + /* pwm2_m1 */ + <1 RK_PA7 2 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm3 { + /omit-if-no-ref/ + pwm3m0_pins: pwm3m0-pins { + rockchip,pins = + /* pwm3_m0 */ + <4 RK_PC6 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm3m1_pins: pwm3m1-pins { + rockchip,pins = + /* pwm3_m1 */ + <2 RK_PA4 3 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm4 { + /omit-if-no-ref/ + pwm4m0_pins: pwm4m0-pins { + rockchip,pins = + /* pwm4_m0 */ + <4 RK_PB7 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm4m1_pins: pwm4m1-pins { + rockchip,pins = + /* pwm4_m1 */ + <1 RK_PA4 2 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm5 { + /omit-if-no-ref/ + pwm5m0_pins: pwm5m0-pins { + rockchip,pins = + /* pwm5_m0 */ + <4 RK_PC0 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm5m1_pins: pwm5m1-pins { + rockchip,pins = + /* pwm5_m1 */ + <3 RK_PC3 1 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm6 { + /omit-if-no-ref/ + pwm6m0_pins: pwm6m0-pins { + rockchip,pins = + /* pwm6_m0 */ + <4 RK_PC1 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm6m1_pins: pwm6m1-pins { + rockchip,pins = + /* pwm6_m1 */ + <1 RK_PC3 3 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm6m2_pins: pwm6m2-pins { + rockchip,pins = + /* pwm6_m2 */ + <3 RK_PC1 1 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwm7 { + /omit-if-no-ref/ + pwm7m0_pins: pwm7m0-pins { + rockchip,pins = + /* pwm7_m0 */ + <4 RK_PC2 1 &pcfg_pull_none_drv_level_0>; + }; + + /omit-if-no-ref/ + pwm7m1_pins: pwm7m1-pins { + rockchip,pins = + /* pwm7_m1 */ + <1 RK_PC2 2 &pcfg_pull_none_drv_level_0>; + }; + }; + + pwr { + /omit-if-no-ref/ + pwr_pins: pwr-pins { + rockchip,pins = + /* pwr_ctrl0 */ + <4 RK_PC2 2 &pcfg_pull_none>, + /* pwr_ctrl1 */ + <4 RK_PB6 1 &pcfg_pull_none>; + }; + }; + + ref { + /omit-if-no-ref/ + refm0_pins: refm0-pins { + rockchip,pins = + /* ref_clk_out_m0 */ + <0 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + refm1_pins: refm1-pins { + rockchip,pins = + /* ref_clk_out_m1 */ + <3 RK_PC3 6 &pcfg_pull_none>; + }; + }; + + rgmii { + /omit-if-no-ref/ + rgmii_miim: rgmii-miim { + rockchip,pins = + /* rgmii_mdc */ + <3 RK_PB6 2 &pcfg_pull_none_drv_level_2>, + /* rgmii_mdio */ + <3 RK_PB7 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + rgmii_rx_bus2: rgmii-rx_bus2 { + rockchip,pins = + /* rgmii_rxd0 */ + <3 RK_PA3 2 &pcfg_pull_none>, + /* rgmii_rxd1 */ + <3 RK_PA2 2 &pcfg_pull_none>, + /* rgmii_rxdv_crs */ + <3 RK_PC2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + rgmii_tx_bus2: rgmii-tx_bus2 { + rockchip,pins = + /* rgmii_txd0 */ + <3 RK_PA1 2 &pcfg_pull_none_drv_level_2>, + /* rgmii_txd1 */ + <3 RK_PA0 2 &pcfg_pull_none_drv_level_2>, + /* rgmii_txen */ + <3 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + rgmii_rgmii_clk: rgmii-rgmii_clk { + rockchip,pins = + /* rgmii_rxclk */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* rgmii_txclk */ + <3 RK_PA4 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + rgmii_rgmii_bus: rgmii-rgmii_bus { + rockchip,pins = + /* rgmii_rxd2 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* rgmii_rxd3 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* rgmii_txd2 */ + <3 RK_PB1 2 &pcfg_pull_none_drv_level_2>, + /* rgmii_txd3 */ + <3 RK_PB0 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + rgmii_clk: rgmii-clk { + rockchip,pins = + /* rgmii_clk */ + <3 RK_PB4 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + rgmii_txer: rgmii-txer { + rockchip,pins = + /* rgmii_txer */ + <3 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + scr { + /omit-if-no-ref/ + scrm0_pins: scrm0-pins { + rockchip,pins = + /* scr_clk_m0 */ + <1 RK_PA2 3 &pcfg_pull_none>, + /* scr_data_m0 */ + <1 RK_PA1 3 &pcfg_pull_none>, + /* scr_detn_m0 */ + <1 RK_PA0 3 &pcfg_pull_none>, + /* scr_rstn_m0 */ + <1 RK_PA3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + scrm1_pins: scrm1-pins { + rockchip,pins = + /* scr_clk_m1 */ + <2 RK_PA5 3 &pcfg_pull_none>, + /* scr_data_m1 */ + <2 RK_PA3 4 &pcfg_pull_none>, + /* scr_detn_m1 */ + <2 RK_PA6 3 &pcfg_pull_none>, + /* scr_rstn_m1 */ + <2 RK_PA4 4 &pcfg_pull_none>; + }; + }; + + sdio0 { + /omit-if-no-ref/ + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + /* sdio0_d0 */ + <1 RK_PA0 1 &pcfg_pull_up_drv_level_2>, + /* sdio0_d1 */ + <1 RK_PA1 1 &pcfg_pull_up_drv_level_2>, + /* sdio0_d2 */ + <1 RK_PA2 1 &pcfg_pull_up_drv_level_2>, + /* sdio0_d3 */ + <1 RK_PA3 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio0_clk: sdio0-clk { + rockchip,pins = + /* sdio0_clk */ + <1 RK_PA5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio0_cmd: sdio0-cmd { + rockchip,pins = + /* sdio0_cmd */ + <1 RK_PA4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio0_det: sdio0-det { + rockchip,pins = + /* sdio0_det */ + <1 RK_PA6 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdio0_pwren: sdio0-pwren { + rockchip,pins = + /* sdio0_pwren */ + <1 RK_PA7 1 &pcfg_pull_none>; + }; + }; + + sdio1 { + /omit-if-no-ref/ + sdio1_bus4: sdio1-bus4 { + rockchip,pins = + /* sdio1_d0 */ + <3 RK_PA6 1 &pcfg_pull_up_drv_level_2>, + /* sdio1_d1 */ + <3 RK_PA7 1 &pcfg_pull_up_drv_level_2>, + /* sdio1_d2 */ + <3 RK_PB0 1 &pcfg_pull_up_drv_level_2>, + /* sdio1_d3 */ + <3 RK_PB1 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio1_clk: sdio1-clk { + rockchip,pins = + /* sdio1_clk */ + <3 RK_PA4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio1_cmd: sdio1-cmd { + rockchip,pins = + /* sdio1_cmd */ + <3 RK_PA5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdio1_det: sdio1-det { + rockchip,pins = + /* sdio1_det */ + <3 RK_PB3 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdio1_pwren: sdio1-pwren { + rockchip,pins = + /* sdio1_pwren */ + <3 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + sdmmc { + /omit-if-no-ref/ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + /* sdmmc_d0 */ + <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d1 */ + <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d2 */ + <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d3 */ + <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_clk: sdmmc-clk { + rockchip,pins = + /* sdmmc_clk */ + <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + /* sdmmc_cmd */ + <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_det: sdmmc-det { + rockchip,pins = + /* sdmmc_detn */ + <2 RK_PA6 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + /* sdmmc_pwren */ + <4 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + spdif { + /omit-if-no-ref/ + spdifm0_pins: spdifm0-pins { + rockchip,pins = + /* spdif_tx_m0 */ + <4 RK_PA0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdifm1_pins: spdifm1-pins { + rockchip,pins = + /* spdif_tx_m1 */ + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdifm2_pins: spdifm2-pins { + rockchip,pins = + /* spdif_tx_m2 */ + <3 RK_PC3 2 &pcfg_pull_none>; + }; + }; + + spi0 { + /omit-if-no-ref/ + spi0_pins: spi0-pins { + rockchip,pins = + /* spi0_clk */ + <4 RK_PB4 2 &pcfg_pull_none_drv_level_2>, + /* spi0_miso */ + <4 RK_PB3 2 &pcfg_pull_none_drv_level_2>, + /* spi0_mosi */ + <4 RK_PB2 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + spi0_csn0: spi0-csn0 { + rockchip,pins = + /* spi0_csn0 */ + <4 RK_PB6 2 &pcfg_pull_none_drv_level_2>; + }; + /omit-if-no-ref/ + spi0_csn1: spi0-csn1 { + rockchip,pins = + /* spi0_csn1 */ + <4 RK_PC1 2 &pcfg_pull_none_drv_level_2>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1_pins: spi1-pins { + rockchip,pins = + /* spi1_clk */ + <1 RK_PB6 2 &pcfg_pull_none_drv_level_2>, + /* spi1_miso */ + <1 RK_PC0 2 &pcfg_pull_none_drv_level_2>, + /* spi1_mosi */ + <1 RK_PB7 2 &pcfg_pull_none_drv_level_2>; + }; + + /omit-if-no-ref/ + spi1_csn0: spi1-csn0 { + rockchip,pins = + /* spi1_csn0 */ + <1 RK_PC1 1 &pcfg_pull_none_drv_level_2>; + }; + /omit-if-no-ref/ + spi1_csn1: spi1-csn1 { + rockchip,pins = + /* spi1_csn1 */ + <1 RK_PC2 1 &pcfg_pull_none_drv_level_2>; + }; + }; + + tsi0 { + /omit-if-no-ref/ + tsi0_pins: tsi0-pins { + rockchip,pins = + /* tsi0_clkin */ + <3 RK_PB2 3 &pcfg_pull_none>, + /* tsi0_d0 */ + <3 RK_PB1 3 &pcfg_pull_none>, + /* tsi0_d1 */ + <3 RK_PB5 3 &pcfg_pull_none>, + /* tsi0_d2 */ + <3 RK_PB6 3 &pcfg_pull_none>, + /* tsi0_d3 */ + <3 RK_PB7 3 &pcfg_pull_none>, + /* tsi0_d4 */ + <3 RK_PA3 3 &pcfg_pull_none>, + /* tsi0_d5 */ + <3 RK_PA2 3 &pcfg_pull_none>, + /* tsi0_d6 */ + <3 RK_PA1 3 &pcfg_pull_none>, + /* tsi0_d7 */ + <3 RK_PA0 3 &pcfg_pull_none>, + /* tsi0_fail */ + <3 RK_PC0 3 &pcfg_pull_none>, + /* tsi0_sync */ + <3 RK_PB4 3 &pcfg_pull_none>, + /* tsi0_valid */ + <3 RK_PB3 3 &pcfg_pull_none>; + }; + }; + + tsi1 { + /omit-if-no-ref/ + tsi1_pins: tsi1-pins { + rockchip,pins = + /* tsi1_clkin */ + <3 RK_PA5 3 &pcfg_pull_none>, + /* tsi1_d0 */ + <3 RK_PA4 3 &pcfg_pull_none>, + /* tsi1_sync */ + <3 RK_PA7 3 &pcfg_pull_none>, + /* tsi1_valid */ + <3 RK_PA6 3 &pcfg_pull_none>; + }; + }; + + uart0 { + /omit-if-no-ref/ + uart0m0_xfer: uart0m0-xfer { + rockchip,pins = + /* uart0_rx_m0 */ + <4 RK_PC7 1 &pcfg_pull_up>, + /* uart0_tx_m0 */ + <4 RK_PD0 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart0m1_xfer: uart0m1-xfer { + rockchip,pins = + /* uart0_rx_m1 */ + <2 RK_PA0 2 &pcfg_pull_up>, + /* uart0_tx_m1 */ + <2 RK_PA1 2 &pcfg_pull_up>; + }; + }; + + uart1 { + /omit-if-no-ref/ + uart1m0_xfer: uart1m0-xfer { + rockchip,pins = + /* uart1_rx_m0 */ + <4 RK_PA7 2 &pcfg_pull_up>, + /* uart1_tx_m0 */ + <4 RK_PA6 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m1_xfer: uart1m1-xfer { + rockchip,pins = + /* uart1_rx_m1 */ + <4 RK_PC6 2 &pcfg_pull_up>, + /* uart1_tx_m1 */ + <4 RK_PC5 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1_ctsn: uart1-ctsn { + rockchip,pins = + /* uart1_ctsn */ + <4 RK_PA4 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart1_rtsn: uart1-rtsn { + rockchip,pins = + /* uart1_rtsn */ + <4 RK_PA5 2 &pcfg_pull_none>; + }; + }; + + uart2 { + /omit-if-no-ref/ + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + /* uart2_rx_m0 */ + <3 RK_PA0 1 &pcfg_pull_up>, + /* uart2_tx_m0 */ + <3 RK_PA1 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2m0_ctsn: uart2m0-ctsn { + rockchip,pins = + /* uart2m0_ctsn */ + <3 RK_PA3 1 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart2m0_rtsn: uart2m0-rtsn { + rockchip,pins = + /* uart2m0_rtsn */ + <3 RK_PA2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + /* uart2_rx_m1 */ + <1 RK_PB0 1 &pcfg_pull_up>, + /* uart2_tx_m1 */ + <1 RK_PB1 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2m1_ctsn: uart2m1-ctsn { + rockchip,pins = + /* uart2m1_ctsn */ + <1 RK_PB3 1 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart2m1_rtsn: uart2m1-rtsn { + rockchip,pins = + /* uart2m1_rtsn */ + <1 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart3 { + /omit-if-no-ref/ + uart3m0_xfer: uart3m0-xfer { + rockchip,pins = + /* uart3_rx_m0 */ + <4 RK_PB0 2 &pcfg_pull_up>, + /* uart3_tx_m0 */ + <4 RK_PB1 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + /* uart3_rx_m1 */ + <4 RK_PB7 3 &pcfg_pull_up>, + /* uart3_tx_m1 */ + <4 RK_PC0 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3_ctsn: uart3-ctsn { + rockchip,pins = + /* uart3_ctsn */ + <4 RK_PA3 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart3_rtsn: uart3-rtsn { + rockchip,pins = + /* uart3_rtsn */ + <4 RK_PA2 3 &pcfg_pull_none>; + }; + }; + + uart4 { + /omit-if-no-ref/ + uart4_xfer: uart4-xfer { + rockchip,pins = + /* uart4_rx */ + <2 RK_PA2 3 &pcfg_pull_up>, + /* uart4_tx */ + <2 RK_PA3 3 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart4_ctsn: uart4-ctsn { + rockchip,pins = + /* uart4_ctsn */ + <2 RK_PA1 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart4_rtsn: uart4-rtsn { + rockchip,pins = + /* uart4_rtsn */ + <2 RK_PA0 3 &pcfg_pull_none>; + }; + }; + + uart5 { + /omit-if-no-ref/ + uart5m0_xfer: uart5m0-xfer { + rockchip,pins = + /* uart5_rx_m0 */ + <1 RK_PA2 2 &pcfg_pull_up>, + /* uart5_tx_m0 */ + <1 RK_PA3 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m0_ctsn: uart5m0-ctsn { + rockchip,pins = + /* uart5m0_ctsn */ + <1 RK_PA6 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart5m0_rtsn: uart5m0-rtsn { + rockchip,pins = + /* uart5m0_rtsn */ + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_xfer: uart5m1-xfer { + rockchip,pins = + /* uart5_rx_m1 */ + <1 RK_PD4 2 &pcfg_pull_up>, + /* uart5_tx_m1 */ + <1 RK_PD7 2 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m1_ctsn: uart5m1-ctsn { + rockchip,pins = + /* uart5m1_ctsn */ + <1 RK_PD3 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart5m1_rtsn: uart5m1-rtsn { + rockchip,pins = + /* uart5m1_rtsn */ + <1 RK_PD2 2 &pcfg_pull_none>; + }; + }; + + uart6 { + /omit-if-no-ref/ + uart6m0_xfer: uart6m0-xfer { + rockchip,pins = + /* uart6_rx_m0 */ + <3 RK_PA7 4 &pcfg_pull_up>, + /* uart6_tx_m0 */ + <3 RK_PA6 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart6m1_xfer: uart6m1-xfer { + rockchip,pins = + /* uart6_rx_m1 */ + <3 RK_PC3 4 &pcfg_pull_up>, + /* uart6_tx_m1 */ + <3 RK_PC1 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart6_ctsn: uart6-ctsn { + rockchip,pins = + /* uart6_ctsn */ + <3 RK_PA4 4 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart6_rtsn: uart6-rtsn { + rockchip,pins = + /* uart6_rtsn */ + <3 RK_PA5 4 &pcfg_pull_none>; + }; + }; + + uart7 { + /omit-if-no-ref/ + uart7m0_xfer: uart7m0-xfer { + rockchip,pins = + /* uart7_rx_m0 */ + <3 RK_PB3 4 &pcfg_pull_up>, + /* uart7_tx_m0 */ + <3 RK_PB2 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m0_ctsn: uart7m0-ctsn { + rockchip,pins = + /* uart7m0_ctsn */ + <3 RK_PB0 4 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart7m0_rtsn: uart7m0-rtsn { + rockchip,pins = + /* uart7m0_rtsn */ + <3 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m1_xfer: uart7m1-xfer { + rockchip,pins = + /* uart7_rx_m1 */ + <1 RK_PB3 4 &pcfg_pull_up>, + /* uart7_tx_m1 */ + <1 RK_PB2 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m1_ctsn: uart7m1-ctsn { + rockchip,pins = + /* uart7m1_ctsn */ + <1 RK_PB0 4 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + uart7m1_rtsn: uart7m1-rtsn { + rockchip,pins = + /* uart7m1_rtsn */ + <1 RK_PB1 4 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index 5b334690356a..b1713ed4d7e2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -4,8 +4,10 @@ * Copyright (c) 2024 Yao Zi */ +#include #include #include +#include #include / { @@ -16,6 +18,11 @@ / { #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -165,6 +172,11 @@ cru: clock-controller@ff4a0000 { #reset-cells = <1>; }; + ioc_grf: syscon@ff540000 { + compatible = "rockchip,rk3528-ioc-grf", "syscon"; + reg = <0x0 0xff540000 0x0 0x40000>; + }; + uart0: serial@ff9f0000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f0000 0x0 0x100>; @@ -251,5 +263,75 @@ uart7: serial@ffa28000 { reg-shift = <2>; status = "disabled"; }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3528-pinctrl"; + rockchip,grf = <&ioc_grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@ff610000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff610000 0x0 0x200>; + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@ffaf0000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xffaf0000 0x0 0x200>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 32 32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@ffb00000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xffb00000 0x0 0x200>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 64 32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@ffb10000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xffb10000 0x0 0x200>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 96 32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@ffb20000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xffb20000 0x0 0x200>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 128 32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; }; }; + +#include "rk3528-pinctrl.dtsi" From 0d2312f0d3e4ce74af0977c1519a07dfc71a82ac Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Fri, 28 Feb 2025 06:40:11 +0000 Subject: [PATCH 67/89] arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C Radxa E20C route UART0 M0 pins (GPIO4_C7 and GPIO4_D0) to the onboard CH340B for debug console use. Add pinctrl for UART0 M0 pins used for serial console. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250228064024.3200000-6-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index d2cdb63d4a9d..5161d22330ab 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -18,5 +18,7 @@ chosen { }; &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; From d83f6c32d70f96037cb187e63785e7a58f9e751b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 4 Mar 2025 11:41:59 +0100 Subject: [PATCH 68/89] arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3399 ROC PC PLUS Devicetree bindings for ES8388 audio codec expect the device to be marked as compatible with ES8328. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250304104200.76178-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts index e2e9279fa267..8e3858cf988c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts @@ -112,7 +112,7 @@ hym8563: rtc@51 { &i2c1 { es8388: es8388@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; clocks = <&cru SCLK_I2S_8CH_OUT>; #sound-dai-cells = <0>; From ced36c336d241eafbc812fed27e6a52908d249bb Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 4 Mar 2025 11:42:00 +0100 Subject: [PATCH 69/89] arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3588 boards Devicetree bindings for ES8388 audio codec expect the device to be marked as compatible with ES8328. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250304104200.76178-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 91021818eb5e..8e912da299a2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -472,7 +472,7 @@ &i2c7 { status = "okay"; es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index 261655c7ccbf..91d56c34a1e4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -276,7 +276,7 @@ &i2c7 { /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */ es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; AVDD-supply = <&vcc_3v3_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index b46abdc27c71..78aaa6635b5d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -311,7 +311,7 @@ &i2c7 { status = "okay"; es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts index 5b3de53630c6..9f4aca9c2e3f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts @@ -242,7 +242,7 @@ &i2c3 { status = "okay"; es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index 8f70c00a46d3..873a2bd6a6de 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -611,7 +611,7 @@ &i2c7 { status = "okay"; es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; assigned-clock-rates = <12288000>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 80a8dca4d6a3..4189a88ecf40 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -412,7 +412,7 @@ &i2c7 { status = "okay"; es8388: audio-codec@11 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x11>; assigned-clock-rates = <12288000>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi index be0234d2257d..37b08d1a215f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi @@ -268,7 +268,7 @@ &i2c6 { status = "okay"; es8388: audio-codec@10 { - compatible = "everest,es8388"; + compatible = "everest,es8388", "everest,es8328"; reg = <0x10>; clocks = <&cru I2S1_8CH_MCLKOUT>; AVDD-supply = <&vcc_3v3_s0>; From d74b842cab0860e41a45df0dac41e4e56202c766 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Tue, 31 Dec 2024 17:57:18 +0800 Subject: [PATCH 70/89] arm64: dts: rockchip: Add vop for rk3576 Add VOP and VOP_MMU found on rk3576. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20241231095728.253943-2-andyshrk@163.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3576.dtsi | 68 ++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 29b47799849a..943a40dca835 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -393,6 +393,11 @@ opp-950000000 { }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { scmi: scmi { compatible = "arm,scmi-smc"; @@ -937,6 +942,69 @@ gpu: gpu@27800000 { status = "disabled"; }; + vop: vop@27d00000 { + compatible = "rockchip,rk3576-vop"; + reg = <0x0 0x27d00000 0x0 0x3000>, <0x0 0x27d05000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = , + , + , + ; + interrupt-names = "sys", + "vp0", + "vp1", + "vp2"; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VP0>, + <&cru DCLK_VP1>, + <&cru DCLK_VP2>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + iommus = <&vop_mmu>; + power-domains = <&power RK3576_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + }; + }; + + vop_mmu: iommu@27d07e00 { + compatible = "rockchip,rk3576-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0x27d07e00 0x0 0x100>, <0x0 0x27d07f00 0x0 0x100>; + interrupts = ; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3576_PD_VOP>; + status = "disabled"; + }; + qos_hdcp1: qos@27f02000 { compatible = "rockchip,rk3576-qos", "syscon"; reg = <0x0 0x27f02000 0x0 0x20>; From ad0ea230ab2a3535b186f7fb863b4bca7050e06f Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Tue, 31 Dec 2024 17:57:19 +0800 Subject: [PATCH 71/89] arm64: dts: rockchip: Add hdmi for rk3576 Add hdmi and it's phy dt node for rk3576. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20241231095728.253943-3-andyshrk@163.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3576.dtsi | 58 ++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 943a40dca835..12aee9018b9f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -625,6 +625,11 @@ u2phy1_otg: otg-port { }; }; + hdptxphy_grf: syscon@26032000 { + compatible = "rockchip,rk3576-hdptxphy-grf", "syscon"; + reg = <0x0 0x26032000 0x0 0x100>; + }; + vo1_grf: syscon@26036000 { compatible = "rockchip,rk3576-vo1-grf", "syscon"; reg = <0x0 0x26036000 0x0 0x100>; @@ -1005,6 +1010,46 @@ vop_mmu: iommu@27d07e00 { status = "disabled"; }; + hdmi: hdmi@27da0000 { + compatible = "rockchip,rk3576-dw-hdmi-qp"; + reg = <0x0 0x27da0000 0x0 0x20000>; + clocks = <&cru PCLK_HDMITX0>, + <&cru CLK_HDMITX0_EARC>, + <&cru CLK_HDMITX0_REF>, + <&cru MCLK_SAI6_8CH>, + <&cru CLK_HDMITXHDP>, + <&cru HCLK_VO0_ROOT>; + clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1"; + interrupts = , + , + , + , + ; + interrupt-names = "avp", "cec", "earc", "main", "hpd"; + phys = <&hdptxphy>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda>; + power-domains = <&power RK3576_PD_VO0>; + resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMITXHDP>; + reset-names = "ref", "hdp"; + rockchip,grf = <&ioc_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + qos_hdcp1: qos@27f02000 { compatible = "rockchip,rk3576-qos", "syscon"; reg = <0x0 0x27f02000 0x0 0x20>; @@ -1863,6 +1908,19 @@ usbdp_phy: phy@2b010000 { status = "disabled"; }; + hdptxphy: hdmiphy@2b000000 { + compatible = "rockchip,rk3576-hdptx-phy", "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0x2b000000 0x0 0x2000>; + clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>; + clock-names = "ref", "apb"; + resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>, + <&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>; + reset-names = "apb", "init", "cmn", "lane"; + rockchip,grf = <&hdptxphy_grf>; + #phy-cells = <0>; + status = "disabled"; + }; + sram: sram@3ff88000 { compatible = "mmio-sram"; reg = <0x0 0x3ff88000 0x0 0x78000>; From 2062b91b9f3c6afe9c2a7d1ddf0f3e6af5f3fa31 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Tue, 31 Dec 2024 17:57:20 +0800 Subject: [PATCH 72/89] arm64: dts: rockchip: Enable hdmi display on sige5 Enable hdmi display on sige5 board. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20241231095728.253943-4-andyshrk@163.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3576-armsom-sige5.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts index 7c7331936a7f..78798b0722a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts @@ -10,6 +10,7 @@ #include #include #include +#include #include #include "rk3576.dtsi" @@ -26,6 +27,17 @@ chosen { stdout-path = "serial0:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: leds { compatible = "gpio-leds"; @@ -214,6 +226,26 @@ &gpu { status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -656,3 +688,18 @@ &uart0 { pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; From 7641678ecb0c242498e2a3b2b0621961653a7c2c Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Wed, 5 Mar 2025 10:51:11 +0800 Subject: [PATCH 73/89] arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10 Enable vop and hdmi on rk3576 evb1, so we can get a display output on this board now. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20250305025128.479245-1-andyshrk@163.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3576-evb1-v10.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts index 782ca000a644..e368691fd28e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -10,6 +10,7 @@ #include #include #include +#include #include "rk3576.dtsi" / { @@ -57,6 +58,17 @@ button-vol-up { }; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: leds { compatible = "gpio-leds"; @@ -270,6 +282,26 @@ ð1m0_rgmii_bus status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -729,3 +761,18 @@ &usb_drd1_dwc3 { dr_mode = "host"; status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; From efc1bc1f36568a4297d20a691758b68c121cf982 Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Wed, 5 Mar 2025 19:42:10 +0000 Subject: [PATCH 74/89] dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon Add compatible string for VO GRF found on RK3528 SoC. Signed-off-by: Yao Zi Acked-by: "Rob Herring (Arm)" Link: https://lore.kernel.org/r/20250305194217.47052-2-ziyao@disroot.org Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index b4ed4cb555bd..98a0670359f6 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -16,6 +16,7 @@ properties: - enum: - rockchip,rk3288-sgrf - rockchip,rk3528-ioc-grf + - rockchip,rk3528-vo-grf - rockchip,rk3566-pipe-grf - rockchip,rk3568-pcie3-phy-grf - rockchip,rk3568-pipe-grf From 8f814d7c9f6cdffc1f5cc97637e12cd699ff9085 Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Wed, 5 Mar 2025 19:42:11 +0000 Subject: [PATCH 75/89] dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon Add compatible string for VPU GRF found on RK3528 SoC. Signed-off-by: Yao Zi Acked-by: "Rob Herring (Arm)" Link: https://lore.kernel.org/r/20250305194217.47052-3-ziyao@disroot.org Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 98a0670359f6..2f61c1b95fea 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -17,6 +17,7 @@ properties: - rockchip,rk3288-sgrf - rockchip,rk3528-ioc-grf - rockchip,rk3528-vo-grf + - rockchip,rk3528-vpu-grf - rockchip,rk3566-pipe-grf - rockchip,rk3568-pcie3-phy-grf - rockchip,rk3568-pipe-grf From 3bf4fc44c6544f994237d8475bf56548a62011f5 Mon Sep 17 00:00:00 2001 From: Patrick Wildt Date: Sun, 2 Mar 2025 21:02:16 +0100 Subject: [PATCH 76/89] dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE) Document board compatible bindings for the MNT Reform 2 with it's RCORE SoM, which is based on Firefly's iCore-3588Q. Signed-off-by: Patrick Wildt Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/Z8S5SHqUqKYiT6Wd@windev.fritz.box Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index eb89c33d81e4..650fb833d96e 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -183,6 +183,13 @@ properties: - const: engicam,px30-core - const: rockchip,px30 + - description: Firefly iCore-3588Q-based boards + items: + - enum: + - mntre,reform2-rcore + - const: firefly,icore-3588q + - const: rockchip,rk3588 + - description: Firefly Core-3588J-based boards items: - enum: From 5324af2d029d47a39ce22ae1613e2753e5e372a2 Mon Sep 17 00:00:00 2001 From: Patrick Wildt Date: Sun, 2 Mar 2025 21:08:24 +0100 Subject: [PATCH 77/89] arm64: dts: rockchip: add MNT Reform 2 laptop MNT Reform 2 is an open source laptop with replaceable CPU modules, including a version with the RK3588-based MNT RCORE[1], which is based on Firefly's iCore-3588Q SoM: - Rockchip RK3588 - Quad A76 and Quad A55 CPU - 6 TOPS NPU - up to 32GB LPDDR4x RAM - SD Card slot - Gigabit ethernet port - HDMI port - 2x mPCIe ports for WiFi or NVMe - 3x USB 3.0 Type-A HOST port [1] https://shop.mntre.com/products/mnt-reform Co-developed-by: "Lukas F. Hartmann" Signed-off-by: "Lukas F. Hartmann" Signed-off-by: Patrick Wildt Link: https://lore.kernel.org/r/Z8S6uDM634KJuyKP@windev.fritz.box Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../rockchip/rk3588-firefly-icore-3588q.dtsi | 443 ++++++++++++++++++ .../boot/dts/rockchip/rk3588-mnt-reform2.dts | 336 +++++++++++++ 3 files changed, 780 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 3c4753bc87cd..3e8771ef69ba 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -152,6 +152,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi new file mode 100644 index 000000000000..6726eeb49255 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi @@ -0,0 +1,443 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include +#include + +#include "rk3588.dtsi" + +/ { + compatible = "firefly,icore-3588q", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m2_xfer>; + status = "okay"; + + vdd_npu_s0: vdd_npu_mem_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <150000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts new file mode 100644 index 000000000000..78a4e896f665 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2024 MNT Research GmbH + */ + +/dts-v1/; + +#include +#include +#include +#include +#include + +#include "rk3588-firefly-icore-3588q.dtsi" + +/ { + model = "MNT Reform 2 with RCORE RK3588 Module"; + compatible = "mntre,reform2-rcore", "firefly,icore-3588q", "rockchip,rk3588"; + chassis-type = "laptop"; + + aliases { + ethernet0 = &gmac0; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 8 16 32 64 128 160 200 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pwms = <&pwm8 0 10000 0>; + }; + + gmac0_clkin: external-gmac0-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "gmac0_clkin"; + }; + + pcie30_avdd1v8: regulator-pcie30-avdd1v8 { + compatible = "regulator-fixed"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pcie30_avdd1v8"; + vin-supply = <&avcc_1v8_s0>; + }; + + pcie30_avdd0v75: regulator-pcie30-avdd0v75 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "pcie30_avdd0v75"; + vin-supply = <&avdd_0v75_s0>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc12v_dcin"; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie30: regulator-vcc3v3-pcie30 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pcie30"; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_host"; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_usb"; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + &gmac0_clkinout + ð_phy_reset>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + sram-supply = <&vdd_gpu_mem_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp2: endpoint { + remote-endpoint = <&vp2_out_hdmi0>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pcie2x1l2 { + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_reset>; + reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + dp { + dp1_hpd: dp1-hpd { + rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_reset: pcie3-reset { + rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + eth_phy { + eth_phy_reset: eth-phy-reset { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm8 { + pinctrl-0 = <&pwm8m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <40000000>; + no-1-8-v; + no-mmc; + no-sdio; + vmmc-supply = <&vcc3v3_pcie30>; + vqmmc-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usbdp_phy0 { + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp2 { + vp2_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi0_in_vp2>; + }; +}; From 19a634195c1abe498798b564cd6b81e6dd4533f7 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Thu, 6 Mar 2025 20:38:08 +0800 Subject: [PATCH 78/89] dt-bindings: mfd: syscon: Add rk3528 QoS register compatible Document rk3528 compatible for QoS registers. Signed-off-by: Chukun Pan Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20250306123809.273655-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/mfd/syscon.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 4d67ff26d445..2836e4793afc 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -103,6 +103,7 @@ select: - rockchip,rk3288-qos - rockchip,rk3368-qos - rockchip,rk3399-qos + - rockchip,rk3528-qos - rockchip,rk3562-qos - rockchip,rk3568-qos - rockchip,rk3576-qos @@ -202,6 +203,7 @@ properties: - rockchip,rk3288-qos - rockchip,rk3368-qos - rockchip,rk3399-qos + - rockchip,rk3528-qos - rockchip,rk3562-qos - rockchip,rk3568-qos - rockchip,rk3576-qos From 61a05d8ca3030a544175671f5fab7a8f29c24085 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Thu, 6 Mar 2025 20:38:09 +0800 Subject: [PATCH 79/89] arm64: dts: rockchip: Add rk3528 QoS register node The Quality-of-Service (QsS) node stores/restores specific register contents when the power domains is turned off/on. Add QoS node so that they can connect to the power domain. Signed-off-by: Chukun Pan Link: https://lore.kernel.org/r/20250306123809.273655-3-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 160 +++++++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index b1713ed4d7e2..0c0e7f151462 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -129,6 +129,166 @@ gic: interrupt-controller@fed01000 { #interrupt-cells = <3>; }; + qos_crypto_a: qos@ff200000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200000 0x0 0x20>; + }; + + qos_crypto_p: qos@ff200080 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200080 0x0 0x20>; + }; + + qos_dcf: qos@ff200100 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200100 0x0 0x20>; + }; + + qos_dft2apb: qos@ff200200 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200200 0x0 0x20>; + }; + + qos_dma2ddr: qos@ff200280 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200280 0x0 0x20>; + }; + + qos_dmac: qos@ff200300 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200300 0x0 0x20>; + }; + + qos_keyreader: qos@ff200380 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff200380 0x0 0x20>; + }; + + qos_cpu: qos@ff210000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff210000 0x0 0x20>; + }; + + qos_debug: qos@ff210080 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff210080 0x0 0x20>; + }; + + qos_gpu_m0: qos@ff220000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff220000 0x0 0x20>; + }; + + qos_gpu_m1: qos@ff220080 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff220080 0x0 0x20>; + }; + + qos_pmu_mcu: qos@ff240000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff240000 0x0 0x20>; + }; + + qos_rkvdec: qos@ff250000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff250000 0x0 0x20>; + }; + + qos_rkvenc: qos@ff260000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff260000 0x0 0x20>; + }; + + qos_gmac0: qos@ff270000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270000 0x0 0x20>; + }; + + qos_hdcp: qos@ff270080 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270080 0x0 0x20>; + }; + + qos_jpegdec: qos@ff270100 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270100 0x0 0x20>; + }; + + qos_rga2_m0ro: qos@ff270200 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270200 0x0 0x20>; + }; + + qos_rga2_m0wo: qos@ff270280 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270280 0x0 0x20>; + }; + + qos_sdmmc0: qos@ff270300 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270300 0x0 0x20>; + }; + + qos_usb2host: qos@ff270380 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270380 0x0 0x20>; + }; + + qos_vdpp: qos@ff270480 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270480 0x0 0x20>; + }; + + qos_vop: qos@ff270500 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff270500 0x0 0x20>; + }; + + qos_emmc: qos@ff280000 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280000 0x0 0x20>; + }; + + qos_fspi: qos@ff280080 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280080 0x0 0x20>; + }; + + qos_gmac1: qos@ff280100 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280100 0x0 0x20>; + }; + + qos_pcie: qos@ff280180 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280180 0x0 0x20>; + }; + + qos_sdio0: qos@ff280200 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280200 0x0 0x20>; + }; + + qos_sdio1: qos@ff280280 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280280 0x0 0x20>; + }; + + qos_tsp: qos@ff280300 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280300 0x0 0x20>; + }; + + qos_usb3otg: qos@ff280380 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280380 0x0 0x20>; + }; + + qos_vpu: qos@ff280400 { + compatible = "rockchip,rk3528-qos", "syscon"; + reg = <0x0 0xff280400 0x0 0x20>; + }; + cru: clock-controller@ff4a0000 { compatible = "rockchip,rk3528-cru"; reg = <0x0 0xff4a0000 0x0 0x30000>; From 0327238991ba2d1de25e1116b1c064f433e45b8d Mon Sep 17 00:00:00 2001 From: Shreeya Patel Date: Fri, 7 Mar 2025 12:18:56 +0300 Subject: [PATCH 80/89] arm64: dts: rockchip: Add device tree support for HDMI RX Controller Add device tree support for Synopsys DesignWare HDMI RX Controller. Reviewed-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Co-developed-by: Dingxian Wen Signed-off-by: Dingxian Wen Signed-off-by: Shreeya Patel Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20250307091857.646581-2-dmitry.osipenko@collabora.com Signed-off-by: Heiko Stuebner --- .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi index a4650137b08c..c964b842e0f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -23,6 +23,30 @@ simple-audio-card,cpu { }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The 4k HDMI capture controller works only with 32bit + * phys addresses and doesn't support IOMMU. HDMI RX CMA + * must be reserved below 4GB. + * The size of 160MB was determined as follows: + * (3840 * 2160 pixels) * (4 bytes/pixel) * (2 frames/buffer) / 10^6 = 66MB + * To ensure sufficient support for practical use-cases, + * we doubled the 66MB value. + */ + hdmi_receiver_cma: hdmi-receiver-cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x0 0x0 0xffffffff>; + size = <0x0 (160 * 0x100000)>; /* 160MiB */ + alignment = <0x0 0x40000>; /* 64K */ + no-map; + status = "disabled"; + }; + }; + usb_host1_xhci: usb@fc400000 { compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; reg = <0x0 0xfc400000 0x0 0x400000>; @@ -228,6 +252,37 @@ hdmi1_out: port@1 { }; }; + hdmi_receiver: hdmi_receiver@fdee0000 { + compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx"; + reg = <0x0 0xfdee0000 0x0 0x6000>; + interrupts = , + , + ; + interrupt-names = "cec", "hdmi", "dma"; + clocks = <&cru ACLK_HDMIRX>, + <&cru CLK_HDMIRX_AUD>, + <&cru CLK_CR_PARA>, + <&cru PCLK_HDMIRX>, + <&cru CLK_HDMIRX_REF>, + <&cru PCLK_S_HDMIRX>, + <&cru HCLK_VO1>; + clock-names = "aclk", + "audio", + "cr_para", + "pclk", + "ref", + "hclk_s_hdmirx", + "hclk_vo1"; + memory-region = <&hdmi_receiver_cma>; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>, + <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>; + reset-names = "axi", "apb", "ref", "biu"; + rockchip,grf = <&sys_grf>; + rockchip,vo1-grf = <&vo1_grf>; + status = "disabled"; + }; + pcie3x4: pcie@fe150000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; #address-cells = <3>; From c62d8fdb27391ee72bfdf53328463813997844f1 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Fri, 7 Mar 2025 12:18:57 +0300 Subject: [PATCH 81/89] arm64: dts: rockchip: Enable HDMI receiver on rock-5b The Rock 5B has a Micro HDMI port, which can be used for receiving HDMI data. This enables support for it. Signed-off-by: Sebastian Reichel Signed-off-by: Shreeya Patel Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20250307091857.646581-3-dmitry.osipenko@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 0208fc0fbe4f..d22068475c5d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -257,6 +257,17 @@ &hdmi1_sound { status = "okay"; }; +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -430,6 +441,12 @@ &pd_gpu { }; &pinctrl { + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; From fbcbc1fb93e14729bd87ab386b7f62694dcc8b51 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Fri, 7 Mar 2025 18:00:08 +0800 Subject: [PATCH 82/89] arm64: dts: rockchip: enable SCMI clk for RK3528 SoC Same as RK3568, RK3528 uses SCMI clk instead of ARMCLK. Add SCMI clk for CPU, GPU and RNG will also use it. Signed-off-by: Chukun Pan Link: https://lore.kernel.org/r/20250307100008.789129-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 31 ++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index 0c0e7f151462..4be53868f324 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -59,6 +59,7 @@ cpu0: cpu@0 { reg = <0x0>; device_type = "cpu"; enable-method = "psci"; + clocks = <&scmi_clk SCMI_CLK_CPU>; }; cpu1: cpu@1 { @@ -66,6 +67,7 @@ cpu1: cpu@1 { reg = <0x1>; device_type = "cpu"; enable-method = "psci"; + clocks = <&scmi_clk SCMI_CLK_CPU>; }; cpu2: cpu@2 { @@ -73,6 +75,7 @@ cpu2: cpu@2 { reg = <0x2>; device_type = "cpu"; enable-method = "psci"; + clocks = <&scmi_clk SCMI_CLK_CPU>; }; cpu3: cpu@3 { @@ -80,6 +83,22 @@ cpu3: cpu@3 { reg = <0x3>; device_type = "cpu"; enable-method = "psci"; + clocks = <&scmi_clk SCMI_CLK_CPU>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; }; }; @@ -88,6 +107,18 @@ psci { method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scmi_shmem: shmem@10f000 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x0010f000 0x0 0x100>; + no-map; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , From 4e4f54aaec204a27d51386a9dd0d3a805fea57f4 Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Thu, 6 Mar 2025 13:06:31 -0500 Subject: [PATCH 83/89] arm64: dts: rockchip: Add HDMI support for rock-4d Enable HDMI and VOP nodes for the rock-4d board. Signed-off-by: Detlev Casanova Link: https://lore.kernel.org/r/20250306180737.127726-1-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3576-rock-4d.dts | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 085feb2db6e5..0ba0be980754 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -26,6 +26,17 @@ chosen { stdout-path = "serial0:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -238,6 +249,26 @@ &gpu { status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -687,3 +718,18 @@ &usb_drd1_dwc3 { dr_mode = "host"; status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; From 6a709e003492e9878d5f1357be0b2e1162e1e6a6 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Tue, 4 Mar 2025 20:16:34 +0000 Subject: [PATCH 84/89] arm64: dts: rockchip: Add leds node to Radxa E20C Radxa E20C has three gpio controlled leds (sys, wan and lan). Add led nodes and set default trigger to heartbeat for the sys led and netdev for the lan and wan leds. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250304201642.831218-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3528-radxa-e20c.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index 5161d22330ab..7f0237206405 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -6,6 +6,8 @@ */ /dts-v1/; + +#include #include "rk3528.dtsi" / { @@ -15,6 +17,52 @@ / { chosen { stdout-path = "serial0:1500000n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan_led_g>, <&sys_led_g>, <&wan_led_g>; + + led-lan { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "netdev"; + }; + + led-sys { + color = ; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-wan { + color = ; + default-state = "off"; + function = LED_FUNCTION_WAN; + gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "netdev"; + }; + }; +}; + +&pinctrl { + leds { + lan_led_g: lan-led-g { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_g: sys-led-g { + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_g: wan-led-g { + rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &uart0 { From ad8afc8813567994164f2720189c819da8c22b99 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Tue, 4 Mar 2025 20:16:35 +0000 Subject: [PATCH 85/89] arm64: dts: rockchip: Add user button to Radxa E20C Radxa E20C has two buttons, one SARADC maskrom button and one GPIO user button. Add support for the user button using a gpio-keys node. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250304201642.831218-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3528-radxa-e20c.dts | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index 7f0237206405..b378774d2a4e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include #include #include "rk3528.dtsi" @@ -18,6 +19,19 @@ chosen { stdout-path = "serial0:1500000n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_key>; + + button-user { + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + label = "USER"; + linux,code = ; + wakeup-source; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -50,6 +64,12 @@ led-wan { }; &pinctrl { + gpio-keys { + user_key: user-key { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + leds { lan_led_g: lan-led-g { rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; From 6e58302c84ce90aadbecd41efe1f69098a6f91e5 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Tue, 4 Mar 2025 20:16:36 +0000 Subject: [PATCH 86/89] arm64: dts: rockchip: Add SARADC node for RK3528 Add a device tree node for the SARADC controller used by RK3528. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250304201642.831218-4-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index 4be53868f324..c2eaa0c6ea90 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include / { compatible = "rockchip,rk3528"; @@ -455,6 +456,18 @@ uart7: serial@ffa28000 { status = "disabled"; }; + saradc: adc@ffae0000 { + compatible = "rockchip,rk3528-saradc"; + reg = <0x0 0xffae0000 0x0 0x10000>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = ; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + #io-channel-cells = <1>; + status = "disabled"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3528-pinctrl"; rockchip,grf = <&ioc_grf>; From 3a2819ee9c71d1c6388e456cc4eb042914d15d7e Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Tue, 4 Mar 2025 20:16:37 +0000 Subject: [PATCH 87/89] arm64: dts: rockchip: Add maskrom button to Radxa E20C Radxa E20C has two buttons, one SARADC maskrom button and one GPIO user button. Add support for the maskrom button using a adc-keys node, also add the regulators used by SARADC controller. Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20250304201642.831218-5-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3528-radxa-e20c.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index b378774d2a4e..5346ef457c2a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -19,6 +19,20 @@ chosen { stdout-path = "serial0:1500000n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "MASKROM"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -61,6 +75,35 @@ led-wan { linux,default-trigger = "netdev"; }; }; + + vcc_1v8: regulator-1v8-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; &pinctrl { @@ -85,6 +128,11 @@ wan_led_g: wan-led-g { }; }; +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0m0_xfer>; From 36299757129c897ef8c7ace6981070d367d89f89 Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Fri, 28 Feb 2025 09:50:47 -0500 Subject: [PATCH 88/89] arm64: dts: rockchip: Add SFC nodes for rk3576 The rk3576 SoC has 2 SFC cores that provide FSPI functions. Signed-off-by: Detlev Casanova Link: https://lore.kernel.org/r/20250228145304.581349-2-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3576.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 12aee9018b9f..edfa0326f299 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1334,6 +1334,17 @@ gmac1_mtl_tx_setup: tx-queues-config { }; }; + sfc1: spi@2a300000 { + compatible = "rockchip,sfc"; + reg = <0x0 0x2a300000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_FSPI1_X2>, <&cru HCLK_FSPI1>; + clock-names = "clk_sfc", "hclk_sfc"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdmmc: mmc@2a310000 { compatible = "rockchip,rk3576-dw-mshc"; reg = <0x0 0x2a310000 0x0 0x4000>; @@ -1373,6 +1384,17 @@ sdhci: mmc@2a330000 { status = "disabled"; }; + sfc0: spi@2a340000 { + compatible = "rockchip,sfc"; + reg = <0x0 0x2a340000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_FSPI_X2>, <&cru HCLK_FSPI>; + clock-names = "clk_sfc", "hclk_sfc"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + otp: otp@2a580000 { compatible = "rockchip,rk3576-otp"; reg = <0x0 0x2a580000 0x0 0x400>; From ba82f56bbf20e4166c988621cd0507509872848e Mon Sep 17 00:00:00 2001 From: Detlev Casanova Date: Fri, 28 Feb 2025 09:50:48 -0500 Subject: [PATCH 89/89] arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D The SPI NOR chip is connected on the FSPI0 core, so enable the sfc0 node and add the flash device to it. The SPI NOR won't work at higher speed than 50 MHz, specify the limit. Signed-off-by: Detlev Casanova Link: https://lore.kernel.org/r/20250228145304.581349-3-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 0ba0be980754..6756403111e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -701,6 +701,22 @@ &sdmmc { status = "okay"; }; + +&sfc0 { + pinctrl-names = "default"; + pinctrl-0 = <&fspi0_pins &fspi0_csn0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; + }; +}; + &u2phy0 { status = "okay"; };