drm/amdgpu: Return result fix in RAS

The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.

Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.

Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c

@@ -105,8 +105,7 @@ static int __amdgpu_eeprom_xfer(struct i2c_adapter *i2c_adap, u32 eeprom_addr,
 	int r;
 	u16 len;
 
-	r = 0;
-	for ( ; buf_size > 0;
+	for (r = 0; buf_size > 0;
 	      buf_size -= len, eeprom_addr += len, eeprom_buf += len) {
 		/* Set the EEPROM address we want to write to/read from.
 		 */

drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c

@@ -355,8 +355,9 @@ static int amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
  *	to see which blocks support RAS on a particular asic.
  *
  */
-static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *buf,
-		size_t size, loff_t *pos)
+static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f,
+					     const char __user *buf,
+					     size_t size, loff_t *pos)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)file_inode(f)->i_private;
 	struct ras_debug_if data;
@@ -370,7 +371,7 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
 
 	ret = amdgpu_ras_debugfs_ctrl_parse_data(f, buf, size, pos, &data);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	if (data.op == 3) {
 		ret = amdgpu_reserve_page_direct(adev, data.inject.address);
@@ -439,21 +440,24 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
  * will reset EEPROM table to 0 entries.
  *
  */
-static ssize_t amdgpu_ras_debugfs_eeprom_write(struct file *f, const char __user *buf,
-		size_t size, loff_t *pos)
+static ssize_t amdgpu_ras_debugfs_eeprom_write(struct file *f,
+					       const char __user *buf,
+					       size_t size, loff_t *pos)
 {
 	struct amdgpu_device *adev =
 		(struct amdgpu_device *)file_inode(f)->i_private;
 	int ret;
 
 	ret = amdgpu_ras_eeprom_reset_table(
-			&(amdgpu_ras_get_context(adev)->eeprom_control));
+		&(amdgpu_ras_get_context(adev)->eeprom_control));
 
-	if (ret == 1) {
+	if (ret > 0) {
+		/* Something was written to EEPROM.
+		 */
 		amdgpu_ras_get_context(adev)->flags = RAS_DEFAULT_FLAGS;
 		return size;
 	} else {
-		return -EIO;
+		return ret;
 	}
 }
 
@@ -1994,7 +1998,7 @@ int amdgpu_ras_recovery_init(struct amdgpu_device *adev)
 	kfree(*data);
 	con->eh_data = NULL;
 out:
-	dev_warn(adev->dev, "Failed to initialize ras recovery!\n");
+	dev_warn(adev->dev, "Failed to initialize ras recovery! (%d)\n", ret);
 
 	/*
 	 * Except error threshold exceeding case, other failure cases in this

drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c

@@ -335,7 +335,7 @@ int amdgpu_ras_eeprom_init(struct amdgpu_ras_eeprom_control *control,
 		ret = amdgpu_ras_eeprom_reset_table(control);
 	}
 
-	return ret == 1 ? 0 : -EIO;
+	return ret > 0 ? 0 : -EIO;
 }
 
 static void __encode_table_record_to_buff(struct amdgpu_ras_eeprom_control *control,

drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c

@@ -222,7 +222,7 @@ static uint32_t smu_v11_0_i2c_transmit(struct i2c_adapter *control,
 				       u32 numbytes, u32 i2c_flag)
 {
 	struct amdgpu_device *adev = to_amdgpu_device(control);
-	uint32_t bytes_sent, reg, ret = 0;
+	u32 bytes_sent, reg, ret = I2C_OK;
 	unsigned long  timeout_counter;
 
 	bytes_sent = 0;
@@ -290,7 +290,6 @@ static uint32_t smu_v11_0_i2c_transmit(struct i2c_adapter *control,
 	}
 
 	ret = smu_v11_0_i2c_poll_tx_status(control);
-
 Err:
 	/* Any error, no point in proceeding */
 	if (ret != I2C_OK) {