mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 11:03:43 +02:00
arm64: dts: rockchip: add Banana Pi P2 Pro board
Banana Pi P2 Pro is the SBC made by Shenzhen SINOVOIP based on Rockchip RK3308. Banana Pi P2 Pro features: - Rockchip RK3308B-S - DDR3 512 MB - eMMC 8 GB - 100M lan + onboard PoE - 40 pin and 12 pin headers - AP6256 BT + WIFI - TF card slot - 2x USB 2.0 (Type-C OTG and Type-A) - Headphone jack Add support for Banana Pi P2 Pro. Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com> Link: https://lore.kernel.org/r/20241030202144.629956-3-dmt.yashin@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Dmitry Yashin
Heiko Stuebner
parent
8068f59395
commit
cdf360b13a
|
|
@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
|
||||
|
|
|
|||
362
arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts
Normal file
362
arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts
Normal file
|
|
@ -0,0 +1,362 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3308.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Banana Pi P2 Pro (RK3308) Board";
|
||||
compatible = "sinovoip,rk3308-bpi-p2pro", "rockchip,rk3308";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac;
|
||||
mmc0 = &emmc;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rockchip,rk3308";
|
||||
|
||||
dais = <&i2s_8ch_2_p0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&phone_ctl>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_en0>, <&led_en1>;
|
||||
|
||||
blue-led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
label = "blue:power";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
green-led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:heartbeat";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log: regulator-1v04-vdd-log {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1040000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
vin-supply = <&vcc_in>;
|
||||
};
|
||||
|
||||
vcc_ddr: regulator-1v5-vcc-ddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
vin-supply = <&vcc_in>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-1v8-vcc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_io: regulator-3v3-vcc-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_in>;
|
||||
};
|
||||
|
||||
vcc_in: regulator-5v0-vcc-in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_in";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_core: regulator-vdd-core {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0 0 5000 1>;
|
||||
pwm-supply = <&vcc_in>;
|
||||
regulator-name = "vdd_core";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <827000>;
|
||||
regulator-max-microvolt = <1340000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-0 = <&wifi_reg_on>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
codec_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s_8ch_2_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_core>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&mac_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rtl8201f>;
|
||||
phy-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
||||
rtl8201f: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac_rst>;
|
||||
reset-assert-us = <50000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s_8ch_2 {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
i2s_8ch_2_p0: port {
|
||||
i2s_8ch_2_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&codec_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio0-supply = <&vcc_io>;
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_io>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_32k>;
|
||||
|
||||
bt {
|
||||
bt_reg_on: bt-reg-on {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
host_wake_bt: host-wake-bt {
|
||||
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac {
|
||||
mac_rst: mac-rst {
|
||||
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_en0: led-en0 {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_en1: led-en1 {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
phone_ctl: phone-ctl {
|
||||
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on: wifi-reg-on {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin_pull_down>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* WIFI part of the AP6256 connected with SDIO */
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
ap6256: wifi@1 {
|
||||
compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* BT part of the AP6256 connected with UART */
|
||||
&uart4 {
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&cru SCLK_RTC32K>;
|
||||
clock-names = "lpo";
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wakeup";
|
||||
device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
|
||||
vbat-supply = <&vcc_io>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user