From 96d49bbfe6c1a6bb43ccd00fb87aca100e32e5e2 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 3 Oct 2019 09:44:10 -0700
Subject: [PATCH 01/24] ARM: omap2plus_defconfig: Fix selected panels after
 generic panel changes

The old omapdrm panels got removed for v5.4 in favor of generic panels,
and the Kconfig options changed. Let's update omap2plus_defconfig
accordingly so the same panels are still enabled.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 64eb896907bf..b647e463b9c7 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -356,14 +356,14 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
 CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
 CONFIG_DRM_OMAP_PANEL_DPI=m
 CONFIG_DRM_OMAP_PANEL_DSI_CM=m
-CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
-CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
-CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_LG_LB035Q02=m
+CONFIG_DRM_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y

From 6b512b0ee091edcb8e46218894e4c917d919d3dc Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Fri, 16 Aug 2019 17:58:12 -0500
Subject: [PATCH 02/24] ARM: dts: logicpd-torpedo-som: Remove twl_keypad

The TWL4030 used on the Logit PD Torpedo SOM does not have the
keypad pins routed.  This patch disables the twl_keypad driver
to remove some splat during boot:

twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22
twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22

Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed error time stamps]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 3fdd0a72f87f..506b118e511a 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -192,3 +192,7 @@ twl_power: power {
 &twl_gpio {
 	ti,use-leds;
 };
+
+&twl_keypad {
+	status = "disabled";
+};

From 734a9b21bb061acdbb0b9c08cd37f80368f381dd Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 8 Oct 2019 10:56:42 +0300
Subject: [PATCH 03/24] ARM: dts: omap5: fix gpu_cm clock provider name

The clkctrl code searches for the parent clockdomain based on the name
of the CM provider node. The introduction of SGX node for omap5 made
the node name for the gpu_cm to be clock-controller. There is no
clockdomain named like this, so the lookup fails. Fix by changing
the node name properly.

Fixes: 394534cb07d8 ("ARM: dts: Configure sgx for omap5")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap54xx-clocks.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index fac2e57dcca9..4791834dacb2 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -1146,7 +1146,7 @@ dss_clkctrl: clk@20 {
 		};
 	};
 
-	gpu_cm: clock-controller@1500 {
+	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;

From 647c8977e111c0a62c93a489ebc4b045c833fdb4 Mon Sep 17 00:00:00 2001
From: Andrey Smirnov <andrew.smirnov@gmail.com>
Date: Thu, 3 Oct 2019 18:45:48 -0700
Subject: [PATCH 04/24] ARM: dts: am3874-iceboard: Fix
 'i2c-mux-idle-disconnect' usage
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

According to
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt,
i2c-mux-idle-disconnect is a property of a parent node since it
pertains to the mux/switch as a whole, so move it there and drop all
of the concurrences in child nodes.

Fixes: d031773169df ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am3874-iceboard.dts | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 883fb85135d4..1b4b2b0500e4 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -111,13 +111,13 @@ pca9548@70 {
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c@0 {
 			/* FMC A */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@1 {
@@ -125,7 +125,6 @@ i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@2 {
@@ -133,7 +132,6 @@ i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@3 {
@@ -141,7 +139,6 @@ i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@4 {
@@ -149,14 +146,12 @@ i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-			i2c-mux-idle-disconnect;
 
 			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
 			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
@@ -182,14 +177,12 @@ i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			i2c-mux-idle-disconnect;
 
 			u41: pca9575@20 {
 				compatible = "nxp,pca9575";

From 087a2b7ec973f6f30f6e7b72cb50b6f7734ffdd2 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 15:11:27 -0700
Subject: [PATCH 05/24] ARM: dts: Use level interrupt for omap4 & 5 wlcore

Commit 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge
sensitive interrupt") changed wlcore interrupts to use edge interrupt based
on what's specified in the wl1835mod.pdf data sheet.

However, there are still cases where we can have lost interrupts as
described in omap_gpio_unidle(). And using a level interrupt instead of edge
interrupt helps as we avoid the check for untriggered GPIO interrupts in
omap_gpio_unidle().

And with commit e6818d29ea15 ("gpio: gpio-omap: configure edge detection
for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts.

Let's change omap4 and 5 wlcore users back to using level interrupt
instead of edge interrupt. Let's not change the others as I've only seen
this on omap4 and 5, probably because the other SoCs don't have l4per idle
independent of the CPUs.

Fixes: 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt")
Depends-on: e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Guy Mishol <guym@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-droid4-xt894.dts       | 2 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi      | 2 +-
 arch/arm/boot/dts/omap4-sdp.dts                | 2 +-
 arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 2 +-
 arch/arm/boot/dts/omap5-board-common.dtsi      | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 4454449de00c..a40fe8d49da6 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -369,7 +369,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x4e>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 14be2ecb62b1..55ea8b6189af 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -474,7 +474,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
 		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x3a>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3c274965ff40..91480ac1f328 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -512,7 +512,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 6dbbc9b3229c..d0032213101e 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -69,7 +69,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 7fff555ee394..68ac04641bdb 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -362,7 +362,7 @@ wlcore: wlcore@2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };

From 5395b5557acbb9901c7ffb963aa7589e4960e7d7 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:04 -0700
Subject: [PATCH 06/24] ARM: OMAP2+: Remove unused wakeup_cpu

After commit 32d174ed1bd7 ("ARM: OMAP4: MPUSS PM: remove unnecessary
shim functions for powerdomain control") this is no longer used.

The code continues execution after context restore on the same CPU,
so we can just use pm_info->pwrdm.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 2d8f90546591..67fa28532a3a 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -227,7 +227,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
-	unsigned int wakeup_cpu;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		return -ENXIO;
@@ -292,7 +291,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	 * secure devices, CPUx does WFI which can result in
 	 * domain transition
 	 */
-	wakeup_cpu = smp_processor_id();
 	pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
 
 	pwrdm_post_transition(NULL);

From dfc065aa896330ce1c13db7ab223b34e94de2f1d Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:04 -0700
Subject: [PATCH 07/24] ARM: OMAP2+: Drop bogus wkup domain oswr setting

The wkup domain is always on and does not have logic off setting. This
got accidentally added by commit f74297dd9354 ("ARM: OMAP2+: Make sure
LOGICRETSTATE bits are not cleared") but is harmless.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pm44xx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 485550af2506..63ccd2e02813 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -137,8 +137,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	 * smsc911x at least if per hits retention during idle.
 	 */
 	if (!strncmp(pwrdm->name, "core", 4) ||
-	    !strncmp(pwrdm->name, "l4per", 5) ||
-	    !strncmp(pwrdm->name, "wkup", 4))
+	    !strncmp(pwrdm->name, "l4per", 5))
 		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET);
 
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);

From ccd369455a2369779ee38cbb709719cce8409974 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:05 -0700
Subject: [PATCH 08/24] ARM: OMAP2+: Remove bogus warnings for machines without
 twl PMIC

In general we want to see a quiet dmesg output with no errors or warnings
unless something is really wrong and needs attention. We currently see
these bogus warnings on boot:

twl: not initialized
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
...

Let's avoid these by checking if a device tree node for cpcap PMIC exists.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_twl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 6787f1e72c6b..cb1e8451c7ad 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -219,7 +219,8 @@ int __init omap4_twl_init(void)
 {
 	struct voltagedomain *voltdm;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap44xx() ||
+	    of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
 		return -ENODEV;
 
 	voltdm = voltdm_lookup("mpu");

From 32236a84906f9df6aeccf6cc735c8e911ef26da6 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:05 -0700
Subject: [PATCH 09/24] ARM: OMAP2+: Update 4430 voltage controller operating
 points

The current operating points in the mainline kernel are out of date for
at least omap4430. Let's use the values from Motorola Mapphone Linux
Android kernel as presumably those have been verified.

Note that these are only used by voltage controller, they do not enable
any new operating points for cpufreq. Looking at the recent omap3 cpufreq
related patches posted, that's a totally separate series of patches.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/control.h      |  1 +
 arch/arm/mach-omap2/opp4xxx_data.c | 16 +++++++++-------
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 393b42110511..eceb4b09adb2 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -195,6 +195,7 @@
 #define OMAP44XX_CONTROL_FUSE_MPU_OPP100	0x243
 #define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO	0x246
 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB	0x24C
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV	0x25A
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index adea43ea1c60..985aeab9bc2a 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -32,20 +32,22 @@
 
 #define OMAP4430_VDD_MPU_OPP50_UV		1025000
 #define OMAP4430_VDD_MPU_OPP100_UV		1200000
-#define OMAP4430_VDD_MPU_OPPTURBO_UV		1313000
-#define OMAP4430_VDD_MPU_OPPNITRO_UV		1375000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV		1325000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV		1388000
+#define OMAP4430_VDD_MPU_OPPNITROSB_UV		1398000
 
 struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27),
 	VOLT_DATA_DEFINE(0, 0, 0, 0),
 };
 
-#define OMAP4430_VDD_IVA_OPP50_UV		1013000
-#define OMAP4430_VDD_IVA_OPP100_UV		1188000
-#define OMAP4430_VDD_IVA_OPPTURBO_UV		1300000
+#define OMAP4430_VDD_IVA_OPP50_UV		 950000
+#define OMAP4430_VDD_IVA_OPP100_UV		1114000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV		1291000
 
 struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
@@ -54,8 +56,8 @@ struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
 	VOLT_DATA_DEFINE(0, 0, 0, 0),
 };
 
-#define OMAP4430_VDD_CORE_OPP50_UV		1025000
-#define OMAP4430_VDD_CORE_OPP100_UV		1200000
+#define OMAP4430_VDD_CORE_OPP50_UV		 962000
+#define OMAP4430_VDD_CORE_OPP100_UV		1127000
 
 struct omap_volt_data omap443x_vdd_core_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),

From d44fa156dcb29dd0215c1fe63e7a7031a106557e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:06 -0700
Subject: [PATCH 10/24] ARM: OMAP2+: Configure voltage controller for cpcap

We can configure voltage controller for cpcap with the data available in
Motorola Mapphone Android Linux kernel. Let's add it so we can have droid4
behave the same way for voltage controller as other omap4 devices and save
some power when idle.

Note that we're now using high-speed i2c mode, looks like the Motorola
kernel had a typo using 0x200 instead of 200 for the timings which may
caused it to not work properly.

Also note that in the long run, this should just become dts data for a
voltage controller device driver. But let's get things working first to
make it possible to test further changes easily.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile     |   5 +
 arch/arm/mach-omap2/omap_twl.c   |   5 -
 arch/arm/mach-omap2/pm.c         |   1 +
 arch/arm/mach-omap2/pm.h         |  14 ++
 arch/arm/mach-omap2/pmic-cpcap.c | 265 +++++++++++++++++++++++++++++++
 5 files changed, 285 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-omap2/pmic-cpcap.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8f208197988f..9ef2f222f1bd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -29,6 +29,11 @@ obj-y += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+
+ifneq ($(CONFIG_MFD_CPCAP),)
+obj-y 					+= pmic-cpcap.o
+endif
+
 obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index cb1e8451c7ad..a642d3b39e50 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -36,11 +36,6 @@
 #define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
 #define OMAP4_VDD_CORE_SR_CMD_REG	0x62
 
-#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
-#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
-#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
-#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
-
 static bool is_offset_valid;
 static u8 smps_offset;
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 7ac9af56762d..01ec1ba4878b 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -148,6 +148,7 @@ int __init omap2_common_pm_late_init(void)
 	/* Init the voltage layer */
 	omap3_twl_init();
 	omap4_twl_init();
+	omap4_cpcap_init();
 	omap_voltage_late_init();
 
 	/* Smartreflex device init */
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8a55b69bca63..2a883a0c1fcd 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -107,6 +107,11 @@ extern u16 pm44xx_errata;
 #define IS_PM44XX_ERRATUM(id)		0
 #endif
 
+#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
+#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
+
 #ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
@@ -134,6 +139,15 @@ static inline int omap4_twl_init(void)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_MFD_CPCAP)
+extern int omap4_cpcap_init(void);
+#else
+static inline int omap4_cpcap_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 #ifdef CONFIG_PM
 extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
 extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
new file mode 100644
index 000000000000..2c2a178d988d
--- /dev/null
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pmic-cpcap.c - CPCAP-specific functions for the OPP code
+ *
+ * Adapted from Motorola Mapphone Android Linux kernel
+ * Copyright (C) 2011 Motorola, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "soc.h"
+#include "pm.h"
+#include "voltage.h"
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include "pm.h"
+#include "vc.h"
+
+/**
+ * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC
+ * @vsel: CPCAP VSEL value to convert
+ *
+ * Returns the microvolts DC that the CPCAP PMIC should generate when
+ * programmed with @vsel.
+ */
+unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
+{
+	if (vsel > 0x44)
+		vsel = 0x44;
+	return (((vsel * 125) + 6000)) * 100;
+}
+
+/**
+ * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the CPCAP PMIC to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+unsigned char omap_cpcap_uv_to_vsel(unsigned long uv)
+{
+	if (uv < 600000)
+		uv = 600000;
+	else if (uv > 1450000)
+		uv = 1450000;
+	return DIV_ROUND_UP(uv - 600000, 12500);
+}
+
+static struct omap_voltdm_pmic omap_cpcap_core = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1350000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x02,
+	.volt_reg_addr = 0x00,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = true,
+	.vsel_to_uv = omap_cpcap_vsel_to_uv,
+	.uv_to_vsel = omap_cpcap_uv_to_vsel,
+};
+
+static struct omap_voltdm_pmic omap_cpcap_iva = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1350000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x44,
+	.volt_reg_addr = 0x0,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = true,
+	.vsel_to_uv = omap_cpcap_vsel_to_uv,
+	.uv_to_vsel = omap_cpcap_uv_to_vsel,
+};
+
+/**
+ * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC
+ * @vsel: MAX8952 VSEL value to convert
+ *
+ * Returns the microvolts DC that the MAX8952 Regulator should generate when
+ * programmed with @vsel.
+ */
+unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
+{
+	if (vsel > 0x3F)
+		vsel = 0x3F;
+	return (((vsel * 100) + 7700)) * 100;
+}
+
+/**
+ * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+unsigned char omap_max8952_uv_to_vsel(unsigned long uv)
+{
+	if (uv < 770000)
+		uv = 770000;
+	else if (uv > 1400000)
+		uv = 1400000;
+	return DIV_ROUND_UP(uv - 770000, 10000);
+}
+
+static struct omap_voltdm_pmic omap443x_max8952_mpu = {
+	.slew_rate = 16000,
+	.step_size = 10000,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1400000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x60,
+	.volt_reg_addr = 0x03,
+	.cmd_reg_addr = 0x03,
+	.i2c_high_speed = true,
+	.vsel_to_uv = omap_max8952_vsel_to_uv,
+	.uv_to_vsel = omap_max8952_uv_to_vsel,
+};
+
+/**
+ * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC
+ * @vsel: FAN535503 VSEL value to convert
+ *
+ * Returns the microvolts DC that the FAN535503 Regulator should generate when
+ * programmed with @vsel.
+ */
+unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
+{
+	/* Extract bits[5:0] */
+	vsel &= 0x3F;
+
+	return (((vsel * 125) + 7500)) * 100;
+}
+
+/**
+ * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC
+ * @vsel: FAN535508 VSEL value to convert
+ *
+ * Returns the microvolts DC that the FAN535508 Regulator should generate when
+ * programmed with @vsel.
+ */
+unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
+{
+	/* Extract bits[5:0] */
+	vsel &= 0x3F;
+
+	if (vsel > 0x37)
+		vsel = 0x37;
+	return (((vsel * 125) + 7500)) * 100;
+}
+
+
+/**
+ * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
+{
+	unsigned char vsel;
+	if (uv < 750000)
+		uv = 750000;
+	else if (uv > 1537500)
+		uv = 1537500;
+
+	vsel = DIV_ROUND_UP(uv - 750000, 12500);
+	return vsel | 0xC0;
+}
+
+/**
+ * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+unsigned char omap_fan535508_uv_to_vsel(unsigned long uv)
+{
+	unsigned char vsel;
+	if (uv < 750000)
+		uv = 750000;
+	else if (uv > 1437500)
+		uv = 1437500;
+
+	vsel = DIV_ROUND_UP(uv - 750000, 12500);
+	return vsel | 0xC0;
+}
+
+/* fan5335-core */
+static struct omap_voltdm_pmic omap4_fan_core = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 850000,
+	.vddmax = 1375000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x4A,
+	.i2c_high_speed = true,
+	.volt_reg_addr = 0x01,
+	.cmd_reg_addr = 0x01,
+	.vsel_to_uv = omap_fan535508_vsel_to_uv,
+	.uv_to_vsel = omap_fan535508_uv_to_vsel,
+};
+
+/* fan5335 iva */
+static struct omap_voltdm_pmic omap4_fan_iva = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 850000,
+	.vddmax = 1375000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x48,
+	.volt_reg_addr = 0x01,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = true,
+	.vsel_to_uv = omap_fan535503_vsel_to_uv,
+	.uv_to_vsel = omap_fan535503_uv_to_vsel,
+};
+
+int __init omap4_cpcap_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return -ENODEV;
+
+	voltdm = voltdm_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
+
+	if (of_machine_is_compatible("motorola,droid-bionic")) {
+		voltdm = voltdm_lookup("mpu");
+		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
+
+		voltdm = voltdm_lookup("mpu");
+		omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
+	} else {
+		voltdm = voltdm_lookup("core");
+		omap_voltage_register_pmic(voltdm, &omap4_fan_core);
+
+		voltdm = voltdm_lookup("iva");
+		omap_voltage_register_pmic(voltdm, &omap4_fan_iva);
+	}
+
+	return 0;
+}

From 623429d5b9011cc56538bc70fced765d7c42e622 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:06 -0700
Subject: [PATCH 11/24] ARM: OMAP2+: Allow per oswr for omap4

Commit f74297dd9354 ("ARM: OMAP2+: Make sure LOGICRETSTATE bits are not
cleared") disabled oswr (open switch retention) for per and core domains
as various GPIO related issues were noticed if the bootloader had
configured the bits for LOGICRETSTATE for per and core domains.

With the recent gpio-omap fixes, mostly related to commit e6818d29ea15
("gpio: gpio-omap: configure edge detection for level IRQs for idle
wakeup"), things now behave for enabling per oswr for omap4.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pm44xx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 63ccd2e02813..d54073d4e46d 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -136,10 +136,12 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	 * we currently will see lost GPIO interrupts for wlcore and
 	 * smsc911x at least if per hits retention during idle.
 	 */
-	if (!strncmp(pwrdm->name, "core", 4) ||
-	    !strncmp(pwrdm->name, "l4per", 5))
+	if (!strncmp(pwrdm->name, "core", 4)
 		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET);
 
+	if (!strncmp(pwrdm->name, "l4per", 5)
+		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF);
+
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;

From caf8c87d7ff2037b502e76ce450565e9bd32a819 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:06 -0700
Subject: [PATCH 12/24] ARM: OMAP2+: Allow core oswr for omap4

Commit f74297dd9354 ("ARM: OMAP2+: Make sure LOGICRETSTATE bits are not
cleared") disabled oswr (open switch retention) for per and core domains
as various GPIO related issues were noticed if the bootloader had
configured the bits for LOGICRETSTATE for per and core domains.

With the recent gpio-omap fixes, mostly related to commit e6818d29ea15
("gpio: gpio-omap: configure edge detection for level IRQs for idle
wakeup"), things now behave for enabling core oswr for omap4.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pm44xx.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index d54073d4e46d..5a7a949ae965 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -128,18 +128,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 		return 0;
 	}
 
-	/*
-	 * Bootloader or kexec boot may have LOGICRETSTATE cleared
-	 * for some domains. This is the case when kexec booting from
-	 * Android kernels that support off mode for example.
-	 * Make sure it's set at least for core and per, otherwise
-	 * we currently will see lost GPIO interrupts for wlcore and
-	 * smsc911x at least if per hits retention during idle.
-	 */
-	if (!strncmp(pwrdm->name, "core", 4)
-		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET);
-
-	if (!strncmp(pwrdm->name, "l4per", 5)
+	if (!strncmp(pwrdm->name, "core", 4) ||
+	    !strncmp(pwrdm->name, "l4per", 5))
 		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF);
 
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);

From 4873843718f903de74b496e39367dc7aaf267c37 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 07:37:07 -0700
Subject: [PATCH 13/24] ARM: OMAP2+: Initialize voltage controller for omap4

We're missing initializing the PRM_VOLTCTRL register for voltage
controller. Let's add omap4_vc_init_pmic_signaling() similar to what we
have for omap3 and enable voltage control for retention.

This brings down droid4 power consumption with mainline kernel to somewhere
between 40 and 50mW from about 70 to 80 mW for the whole device when
running idle with LCD and backlight off, WLAN connected, and USB and modem
modules unloaded.

Mostly just rmmod of omap2430, ohci-platform and phy-mapphone-mdm6600 are
needed to idle USB and shut down the modem. And after that measuring idle
power consumption can be done with reading sysfs entry periodically
for /sys/class/power_supply/battery/power_avg. Then rmmod of phy-cpcap-usb
will save few more mW, but will disable the debug UART.

Note that sometimes CM_L4PER_UART1_CLKCTRL at 0x4a009540 does not idle
properly after unloading of phy-mapphone-mdm6600.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/vc.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index d76b1e5eb8ba..3c94d1da4c84 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -26,6 +26,25 @@
 #include "scrm44xx.h"
 #include "control.h"
 
+#define OMAP4430_VDD_IVA_I2C_DISABLE		BIT(14)
+#define OMAP4430_VDD_MPU_I2C_DISABLE		BIT(13)
+#define OMAP4430_VDD_CORE_I2C_DISABLE		BIT(12)
+#define OMAP4430_VDD_IVA_PRESENCE		BIT(9)
+#define OMAP4430_VDD_MPU_PRESENCE		BIT(8)
+#define OMAP4430_AUTO_CTRL_VDD_IVA(x)		((x) << 4)
+#define OMAP4430_AUTO_CTRL_VDD_MPU(x)		((x) << 2)
+#define OMAP4430_AUTO_CTRL_VDD_CORE(x)		((x) << 0)
+#define OMAP4430_AUTO_CTRL_VDD_RET		2
+
+#define OMAP4_VDD_DEFAULT_VAL	\
+	(OMAP4430_VDD_IVA_I2C_DISABLE | \
+	 OMAP4430_VDD_MPU_I2C_DISABLE |	 \
+	 OMAP4430_VDD_CORE_I2C_DISABLE | \
+	 OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \
+	 OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \
+	 OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \
+	 OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET))
+
 /**
  * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
  * @sa: bit for slave address
@@ -542,9 +561,19 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
 	writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME);
 }
 
+static void __init omap4_vc_init_pmic_signaling(struct voltagedomain *voltdm)
+{
+	if (vc.vd)
+		return;
+
+	vc.vd = voltdm;
+	voltdm->write(OMAP4_VDD_DEFAULT_VAL, OMAP4_PRM_VOLTCTRL_OFFSET);
+}
+
 /* OMAP4 specific voltage init functions */
 static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
 {
+	omap4_vc_init_pmic_signaling(voltdm);
 	omap4_set_timings(voltdm, true);
 	omap4_set_timings(voltdm, false);
 }

From 645ad6f3ca450ecd30e79d168563d79448317674 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 08:21:50 -0700
Subject: [PATCH 14/24] ARM: OMAP2+: Drop unused enable_wakeup and
 disable_wakeup

We're only using static _enable_wakeup(), the others have no callers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c | 97 --------------------------------
 arch/arm/mach-omap2/omap_hwmod.h |  3 -
 2 files changed, 100 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 203664c40d3d..a136788db839 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -623,39 +623,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
-/**
- * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
- * @oh: struct omap_hwmod *
- *
- * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
- * upon error or 0 upon success.
- */
-static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
-{
-	if (!oh->class->sysc ||
-	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
-	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
-		*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
-
-	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
-	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
-
-	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
-
-	return 0;
-}
-
 static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 {
 	struct clk_hw_omap *clk;
@@ -3867,70 +3834,6 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
  * for context save/restore operations?
  */
 
-/**
- * omap_hwmod_enable_wakeup - allow device to wake up the system
- * @oh: struct omap_hwmod *
- *
- * Sets the module OCP socket ENAWAKEUP bit to allow the module to
- * send wakeups to the PRCM, and enable I/O ring wakeup events for
- * this IP block if it has dynamic mux entries.  Eventually this
- * should set PRCM wakeup registers to cause the PRCM to receive
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_enable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_disable_wakeup - prevent device from waking the system
- * @oh: struct omap_hwmod *
- *
- * Clears the module OCP socket ENAWAKEUP bit to prevent the module
- * from sending wakeups to the PRCM, and disable I/O ring wakeup
- * events for this IP block if it has dynamic mux entries.  Eventually
- * this should clear PRCM wakeup registers to cause the PRCM to ignore
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_disable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
 /**
  * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
  * contained in the hwmod module.
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index ef1bb08b1a2d..2d0fd99d4713 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -646,9 +646,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
 int omap_hwmod_for_each_by_class(const char *classname,
 				 int (*fn)(struct omap_hwmod *oh,
 					   void *user),

From 21a18129edd773c7c75725af344f51faf00040e6 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 08:04:54 -0700
Subject: [PATCH 15/24] ARM: OMAP2+: Simplify code for clkdm_clock_enable and
 disable

We can make clkdm_clk_enable() usable for clkdm_hwmod_enable() by
dropping the unused clock check, and drop _clkdm_clk_hwmod_enable().

And we can make clkdm_hwmod_disable() call clkdm_hwmod_disable() and drop
the duplicate code in clkdm_hwmod_disable().

Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clockdomain.c | 78 ++++++++-----------------------
 1 file changed, 20 insertions(+), 58 deletions(-)

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index f98c8ecc9ca2..dedd47e30b98 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1147,7 +1147,21 @@ void clkdm_del_autodeps(struct clockdomain *clkdm)
 
 /* Clockdomain-to-clock/hwmod framework interface code */
 
-static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
+/**
+ * clkdm_clk_enable - add an enabled downstream clock to this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the enabled downstream clock
+ *
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @clk is enabled.  Intended to be called by
+ * clk_enable() code.  If the clockdomain is in software-supervised
+ * idle mode, force the clockdomain to wake.  If the clockdomain is in
+ * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
+ * ensure that devices in the clockdomain can be read from/written to
+ * by on-chip processors.  Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
+ */
+int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *unused)
 {
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
 		return -EINVAL;
@@ -1174,33 +1188,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 	return 0;
 }
 
-/**
- * clkdm_clk_enable - add an enabled downstream clock to this clkdm
- * @clkdm: struct clockdomain *
- * @clk: struct clk * of the enabled downstream clock
- *
- * Increment the usecount of the clockdomain @clkdm and ensure that it
- * is awake before @clk is enabled.  Intended to be called by
- * clk_enable() code.  If the clockdomain is in software-supervised
- * idle mode, force the clockdomain to wake.  If the clockdomain is in
- * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
- * ensure that devices in the clockdomain can be read from/written to
- * by on-chip processors.  Returns -EINVAL if passed null pointers;
- * returns 0 upon success or if the clockdomain is in hwsup idle mode.
- */
-int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
-{
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream clocks for debugging purposes?
-	 */
-
-	if (!clk)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_enable(clkdm);
-}
-
 /**
  * clkdm_clk_disable - remove an enabled downstream clock from this clkdm
  * @clkdm: struct clockdomain *
@@ -1216,13 +1203,13 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
  */
 int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 {
-	if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
 		return -EINVAL;
 
 	pwrdm_lock(clkdm->pwrdm.ptr);
 
 	/* corner case: disabling unused clocks */
-	if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0)
+	if (clk && (__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0)
 		goto ccd_exit;
 
 	if (clkdm->usecount == 0) {
@@ -1277,7 +1264,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	return _clkdm_clk_hwmod_enable(clkdm);
+	return clkdm_clk_enable(clkdm, NULL);
 }
 
 /**
@@ -1300,35 +1287,10 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		return 0;
 
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream hwmods for debugging purposes?
-	 */
-
-	if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+	if (!oh)
 		return -EINVAL;
 
-	pwrdm_lock(clkdm->pwrdm.ptr);
-
-	if (clkdm->usecount == 0) {
-		pwrdm_unlock(clkdm->pwrdm.ptr);
-		WARN_ON(1); /* underflow */
-		return -ERANGE;
-	}
-
-	clkdm->usecount--;
-	if (clkdm->usecount > 0) {
-		pwrdm_unlock(clkdm->pwrdm.ptr);
-		return 0;
-	}
-
-	arch_clkdm->clkdm_clk_disable(clkdm);
-	pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
-	pwrdm_unlock(clkdm->pwrdm.ptr);
-
-	pr_debug("clockdomain: %s: disabled\n", clkdm->name);
-
-	return 0;
+	return clkdm_clk_disable(clkdm, NULL);
 }
 
 /**

From 821093e1fd3c5e0b40601ffbd27f2d7692a7a1e6 Mon Sep 17 00:00:00 2001
From: YueHaibing <yuehaibing@huawei.com>
Date: Fri, 18 Oct 2019 20:07:01 +0800
Subject: [PATCH 16/24] ARM: OMAP2+: Make some functions static

Fix sparse warnings:

arch/arm/mach-omap2/pmic-cpcap.c:29:15: warning: symbol 'omap_cpcap_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:43:15: warning: symbol 'omap_cpcap_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:93:15: warning: symbol 'omap_max8952_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:107:15: warning: symbol 'omap_max8952_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:140:15: warning: symbol 'omap_fan535503_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:155:15: warning: symbol 'omap_fan535508_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:173:15: warning: symbol 'omap_fan535503_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:192:15: warning: symbol 'omap_fan535508_uv_to_vsel' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pmic-cpcap.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 2c2a178d988d..3cdf40e4fb9d 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -26,7 +26,7 @@
  * Returns the microvolts DC that the CPCAP PMIC should generate when
  * programmed with @vsel.
  */
-unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
+static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
 {
 	if (vsel > 0x44)
 		vsel = 0x44;
@@ -40,7 +40,7 @@ unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
  * Returns the VSEL value necessary for the CPCAP PMIC to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
-unsigned char omap_cpcap_uv_to_vsel(unsigned long uv)
+static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv)
 {
 	if (uv < 600000)
 		uv = 600000;
@@ -90,7 +90,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = {
  * Returns the microvolts DC that the MAX8952 Regulator should generate when
  * programmed with @vsel.
  */
-unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
+static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
 {
 	if (vsel > 0x3F)
 		vsel = 0x3F;
@@ -104,7 +104,7 @@ unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
  * Returns the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
-unsigned char omap_max8952_uv_to_vsel(unsigned long uv)
+static unsigned char omap_max8952_uv_to_vsel(unsigned long uv)
 {
 	if (uv < 770000)
 		uv = 770000;
@@ -137,7 +137,7 @@ static struct omap_voltdm_pmic omap443x_max8952_mpu = {
  * Returns the microvolts DC that the FAN535503 Regulator should generate when
  * programmed with @vsel.
  */
-unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
+static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
 {
 	/* Extract bits[5:0] */
 	vsel &= 0x3F;
@@ -152,7 +152,7 @@ unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
  * Returns the microvolts DC that the FAN535508 Regulator should generate when
  * programmed with @vsel.
  */
-unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
+static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
 {
 	/* Extract bits[5:0] */
 	vsel &= 0x3F;
@@ -170,7 +170,7 @@ unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
  * Returns the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
-unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
+static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
 {
 	unsigned char vsel;
 	if (uv < 750000)
@@ -189,7 +189,7 @@ unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
  * Returns the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
-unsigned char omap_fan535508_uv_to_vsel(unsigned long uv)
+static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv)
 {
 	unsigned char vsel;
 	if (uv < 750000)

From 71065d3fe82dbb2a827a081ceeca272ab7fa0905 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 18 Oct 2019 15:09:53 -0700
Subject: [PATCH 17/24] ARM: OMAP2+: Configure voltage controller for retention

Similar to existing omap3_vc_set_pmic_signaling(), let's add omap4
specific omap4_vc_set_pmic_signaling(). This allows the configured
devices to enable voltage controller for retention later on during
init.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/vc.c | 32 +++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/vc.h |  2 +-
 2 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 3c94d1da4c84..888b8eecaf4d 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -36,15 +36,21 @@
 #define OMAP4430_AUTO_CTRL_VDD_CORE(x)		((x) << 0)
 #define OMAP4430_AUTO_CTRL_VDD_RET		2
 
-#define OMAP4_VDD_DEFAULT_VAL	\
+#define OMAP4430_VDD_I2C_DISABLE_MASK	\
 	(OMAP4430_VDD_IVA_I2C_DISABLE | \
-	 OMAP4430_VDD_MPU_I2C_DISABLE |	 \
-	 OMAP4430_VDD_CORE_I2C_DISABLE | \
+	 OMAP4430_VDD_MPU_I2C_DISABLE | \
+	 OMAP4430_VDD_CORE_I2C_DISABLE)
+
+#define OMAP4_VDD_DEFAULT_VAL	\
+	(OMAP4430_VDD_I2C_DISABLE_MASK | \
 	 OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \
 	 OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \
 	 OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \
 	 OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET))
 
+#define OMAP4_VDD_RET_VAL	\
+	(OMAP4_VDD_DEFAULT_VAL & ~OMAP4430_VDD_I2C_DISABLE_MASK)
+
 /**
  * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
  * @sa: bit for slave address
@@ -299,6 +305,26 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
 	}
 }
 
+void omap4_vc_set_pmic_signaling(int core_next_state)
+{
+	struct voltagedomain *vd = vc.vd;
+	u32 val;
+
+	if (!vd)
+		return;
+
+	switch (core_next_state) {
+	case PWRDM_POWER_RET:
+		val = OMAP4_VDD_RET_VAL;
+		break;
+	default:
+		val = OMAP4_VDD_DEFAULT_VAL;
+		break;
+	}
+
+	vd->write(val, OMAP4_PRM_VOLTCTRL_OFFSET);
+}
+
 /*
  * Configure signal polarity for sys_clkreq and sys_off_mode pins
  * as the default values are wrong and can cause the system to hang
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 5bf088633b62..9e861dbc2c4c 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -117,7 +117,7 @@ extern struct omap_vc_param omap4_iva_vc_data;
 extern struct omap_vc_param omap4_core_vc_data;
 
 void omap3_vc_set_pmic_signaling(int core_next_state);
-
+void omap4_vc_set_pmic_signaling(int core_next_state);
 
 void omap_vc_init_channel(struct voltagedomain *voltdm);
 int omap_vc_pre_scale(struct voltagedomain *voltdm,

From c145649bf262a0614fbe5955bdffdfaba9023fce Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 17 Oct 2019 06:34:34 -0700
Subject: [PATCH 18/24] ARM: OMAP2+: Configure voltage controller for cpcap to
 low-speed

Looks like the i2c timings in high-speed mode do not work properly to
allow us to clear I2C_DISABLE bits for PRM_VOLTCTRL register and the
device reboots if I2C_DISABLE bits are cleared.

Let's configure the voltage controller i2c for low-speed mode as done in
the Motorola Mapphone Android Linux kernel. This saves us about 7mW of
power during retention compared to the high-speed values.

Let's also change the low-speed warning to pr_info about relying on the
bootloader configured low-speed values like we currently do.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pmic-cpcap.c | 18 +++++++++++++-----
 arch/arm/mach-omap2/vc.c         |  2 +-
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 3cdf40e4fb9d..3958f8ce7ca8 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -61,7 +61,7 @@ static struct omap_voltdm_pmic omap_cpcap_core = {
 	.i2c_slave_addr = 0x02,
 	.volt_reg_addr = 0x00,
 	.cmd_reg_addr = 0x01,
-	.i2c_high_speed = true,
+	.i2c_high_speed = false,
 	.vsel_to_uv = omap_cpcap_vsel_to_uv,
 	.uv_to_vsel = omap_cpcap_uv_to_vsel,
 };
@@ -78,7 +78,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = {
 	.i2c_slave_addr = 0x44,
 	.volt_reg_addr = 0x0,
 	.cmd_reg_addr = 0x01,
-	.i2c_high_speed = true,
+	.i2c_high_speed = false,
 	.vsel_to_uv = omap_cpcap_vsel_to_uv,
 	.uv_to_vsel = omap_cpcap_uv_to_vsel,
 };
@@ -125,7 +125,7 @@ static struct omap_voltdm_pmic omap443x_max8952_mpu = {
 	.i2c_slave_addr = 0x60,
 	.volt_reg_addr = 0x03,
 	.cmd_reg_addr = 0x03,
-	.i2c_high_speed = true,
+	.i2c_high_speed = false,
 	.vsel_to_uv = omap_max8952_vsel_to_uv,
 	.uv_to_vsel = omap_max8952_uv_to_vsel,
 };
@@ -212,7 +212,7 @@ static struct omap_voltdm_pmic omap4_fan_core = {
 	.vddmax = 1375000,
 	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr = 0x4A,
-	.i2c_high_speed = true,
+	.i2c_high_speed = false,
 	.volt_reg_addr = 0x01,
 	.cmd_reg_addr = 0x01,
 	.vsel_to_uv = omap_fan535508_vsel_to_uv,
@@ -232,7 +232,7 @@ static struct omap_voltdm_pmic omap4_fan_iva = {
 	.i2c_slave_addr = 0x48,
 	.volt_reg_addr = 0x01,
 	.cmd_reg_addr = 0x01,
-	.i2c_high_speed = true,
+	.i2c_high_speed = false,
 	.vsel_to_uv = omap_fan535503_vsel_to_uv,
 	.uv_to_vsel = omap_fan535503_uv_to_vsel,
 };
@@ -263,3 +263,11 @@ int __init omap4_cpcap_init(void)
 
 	return 0;
 }
+
+static int __init cpcap_late_init(void)
+{
+	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+
+	return 0;
+}
+omap_late_initcall(cpcap_late_init);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 888b8eecaf4d..86f1ac4c2412 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -670,7 +670,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
 	const struct i2c_init_data *i2c_data;
 
 	if (!voltdm->pmic->i2c_high_speed) {
-		pr_warn("%s: only high speed supported!\n", __func__);
+		pr_info("%s: using bootloader low-speed timings\n", __func__);
 		return;
 	}
 

From 87c59ca22b484a08cb3764a3f7f7315297bafc9b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 8 Oct 2019 13:33:36 +0100
Subject: [PATCH 19/24] ARM: OMAP2+: do not export am43xx_control functions

Do not export am43xx_control_{save,restore}_context to avoid
the foloowing warnings:

arch/arm/mach-omap2/control.c:687:6: warning: symbol 'am43xx_control_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/control.c:701:6: warning: symbol 'am43xx_control_restore_context' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/control.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index c84b5e260617..73338cf80d76 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -684,7 +684,7 @@ static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)];
  *
  * Save the wkup domain registers
  */
-void am43xx_control_save_context(void)
+static void am43xx_control_save_context(void)
 {
 	int i;
 
@@ -698,7 +698,7 @@ void am43xx_control_save_context(void)
  *
  * Restore the wkup domain registers
  */
-void am43xx_control_restore_context(void)
+static void am43xx_control_restore_context(void)
 {
 	int i;
 

From 607295af887066cbf4e39587b144a65cc2b96ea2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 9 Oct 2019 09:56:45 +0100
Subject: [PATCH 20/24] ARM: OMAP2+: make dra7xx_sha0_hwmod static

The dra7xx_sha0_hwmod object is not exported outside of
omap_hwmod_7xx_data. so make it static to avoid the
following warning:

arch/arm/mach-omap2/omap_hwmod_7xx_data.c:686:19: warning: symbol 'dra7xx_sha0_hwmod' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index e5bd549d2a5e..bd392d59382b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -683,7 +683,7 @@ static struct omap_hwmod_class dra7xx_sha0_hwmod_class = {
 	.sysc		= &dra7xx_sha0_sysc,
 };
 
-struct omap_hwmod dra7xx_sha0_hwmod = {
+static struct omap_hwmod dra7xx_sha0_hwmod = {
 	.name		= "sham",
 	.class		= &dra7xx_sha0_hwmod_class,
 	.clkdm_name	= "l4sec_clkdm",

From 89ffcdba95bdc250d926a1784c61848dab4568eb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 8 Oct 2019 13:33:37 +0100
Subject: [PATCH 21/24] ARM: OMAP2+: prm44xx: make prm_{save,restore}_context
 static

The prm_{save,restore}_context functions are not exported
so make them static to avoid the following warnings:

arch/arm/mach-omap2/prm44xx.c:748:6: warning: symbol 'prm_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/prm44xx.c:759:6: warning: symbol 'prm_restore_context' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/prm44xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 1d9346f2a4ae..25093c1e5b9a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -745,7 +745,7 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 
 static int omap44xx_prm_late_init(void);
 
-void prm_save_context(void)
+static void prm_save_context(void)
 {
 	omap_prm_context.irq_enable =
 			omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST,
@@ -756,7 +756,7 @@ void prm_save_context(void)
 						omap4_prcm_irq_setup.pm_ctrl);
 }
 
-void prm_restore_context(void)
+static void prm_restore_context(void)
 {
 	omap4_prm_write_inst_reg(omap_prm_context.irq_enable,
 				 OMAP4430_PRM_OCP_SOCKET_INST,

From 06bd77f965ae5209ec6024cb4e48c05a83141784 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 9 Oct 2019 09:56:46 +0100
Subject: [PATCH 22/24] ARM: OMAP2+: make omap44xx_sha0_hwmod and
 omap44xx_l3_main_2__des static

The omap44xx_sha0_hwmod and omap44xx_l3_main_2__des objects are
not exported so make them static to avoid the following warnings:

arch/arm/mach-omap2/omap_hwmod_44xx_data.c:793:19: warning: symbol 'omap44xx_sha0_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_44xx_data.c:977:26: warning: symbol 'omap44xx_l3_main_2__des' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 28ea2960a9b2..a11cd6f57d7c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -790,7 +790,7 @@ static struct omap_hwmod_class omap44xx_sha0_hwmod_class = {
 	.sysc		= &omap44xx_sha0_sysc,
 };
 
-struct omap_hwmod omap44xx_sha0_hwmod = {
+static struct omap_hwmod omap44xx_sha0_hwmod = {
 	.name		= "sham",
 	.class		= &omap44xx_sha0_hwmod_class,
 	.clkdm_name	= "l4_secure_clkdm",
@@ -974,7 +974,7 @@ static struct omap_hwmod omap44xx_des_hwmod = {
 	},
 };
 
-struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_des_hwmod,
 	.clk		= "l3_div_ck",

From 1994ebd1f746fcfaee316875ef13118e9df0d2a3 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Thu, 3 Oct 2019 15:41:46 +0200
Subject: [PATCH 23/24] ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support

All TI_ST users have been migrated to the new serdev based HCILL
bluetooth driver. That driver is initialized from DT and does not
need any platform quirks.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 52 ------------------------------
 1 file changed, 52 deletions(-)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index d942a3357090..02abeb44cab2 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
@@ -139,53 +138,6 @@ static void __init omap3_sbc_t3530_legacy_init(void)
 	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
 }
 
-static struct ti_st_plat_data wilink_pdata = {
-	.nshutdown_gpio = 137,
-	.dev_name = "/dev/ttyO1",
-	.flow_cntrl = 1,
-	.baud_rate = 300000,
-};
-
-static struct platform_device wl18xx_device = {
-	.name	= "kim",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wilink_pdata,
-	}
-};
-
-static struct ti_st_plat_data wilink7_pdata = {
-	.nshutdown_gpio = 162,
-	.dev_name = "/dev/ttyO1",
-	.flow_cntrl = 1,
-	.baud_rate = 3000000,
-};
-
-static struct platform_device wl128x_device = {
-	.name	= "kim",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wilink7_pdata,
-	}
-};
-
-static struct platform_device btwilink_device = {
-	.name	= "btwilink",
-	.id	= -1,
-};
-
-static void __init omap3_igep0020_rev_f_legacy_init(void)
-{
-	platform_device_register(&wl18xx_device);
-	platform_device_register(&btwilink_device);
-}
-
-static void __init omap3_igep0030_rev_g_legacy_init(void)
-{
-	platform_device_register(&wl18xx_device);
-	platform_device_register(&btwilink_device);
-}
-
 static void __init omap3_evm_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
@@ -299,8 +251,6 @@ static void __init omap3_tao3530_legacy_init(void)
 static void __init omap3_logicpd_torpedo_init(void)
 {
 	omap3_gpio126_127_129();
-	platform_device_register(&wl128x_device);
-	platform_device_register(&btwilink_device);
 }
 
 /* omap3pandora legacy devices */
@@ -679,8 +629,6 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
-	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
-	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
 	{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },

From 0a4818c19221569b1877ededb3ed991aba35c1e8 Mon Sep 17 00:00:00 2001
From: YueHaibing <yuehaibing@huawei.com>
Date: Wed, 23 Oct 2019 06:29:00 +0000
Subject: [PATCH 24/24] ARM: OMAP2+: Remove duplicated include from
 pmic-cpcap.c

Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pmic-cpcap.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 3958f8ce7ca8..eab281a5fc9f 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -15,8 +15,6 @@
 #include "voltage.h"
 
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include "pm.h"
 #include "vc.h"
 
 /**