phy: qcom-qmp-usbc: Rename QCS615 DP PHY variables and functions

Commit 81791c45c8 ("phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config
and DP mode support") chose to name  QCS615 DP PHY variables/functions
with qmp_v2 prefix, by assuming that QMP PHY registers are versioned
as a whole.  However, the reality is that the registers are versioned
in sub-modules like QSERDES COM and QSERDES TXRX respectively, e.g.
QCS615 DP PHY has registers of QSERDES COM v2 and QSERDES TXRX v3.
Thus it may cause confusion that qmp_v2_xxx table and functions access
QSERDES TXRX v3 registers.

Rename QCS615 DP PHY variables and functions to be prefixed by qcs615
instead of qmp_v2.  This better aligns with how the driver names USB3 PHY
variables for QCM2290 etc.

Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-5-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Shawn Guo 2026-03-14 13:13:23 +08:00 committed by Vinod Koul
parent 9dfdd6e7be
commit c834f0a690

View File

@ -290,7 +290,7 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
};
static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl[] = {
static const struct qmp_phy_init_tbl qcs615_dp_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_SVS_MODE_CLK_SEL, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_SYSCLK_EN_SEL, 0x37),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_CLK_SELECT, 0x00),
@ -317,7 +317,7 @@ static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_CMN_CONFIG, 0x02),
};
static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_rbr[] = {
static const struct qmp_phy_init_tbl qcs615_dp_serdes_tbl_rbr[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_HSCLK_SEL, 0x2c),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DEC_START_MODE0, 0x69),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START1_MODE0, 0x00),
@ -328,7 +328,7 @@ static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_rbr[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP3_MODE0, 0x00),
};
static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_hbr[] = {
static const struct qmp_phy_init_tbl qcs615_dp_serdes_tbl_hbr[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_HSCLK_SEL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DEC_START_MODE0, 0x69),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START1_MODE0, 0x00),
@ -339,7 +339,7 @@ static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_hbr[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP3_MODE0, 0x00),
};
static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_hbr2[] = {
static const struct qmp_phy_init_tbl qcs615_dp_serdes_tbl_hbr2[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_HSCLK_SEL, 0x20),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DEC_START_MODE0, 0x8c),
QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START1_MODE0, 0x00),
@ -350,7 +350,7 @@ static const struct qmp_phy_init_tbl qmp_v2_dp_serdes_tbl_hbr2[] = {
QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP3_MODE0, 0x00),
};
static const struct qmp_phy_init_tbl qmp_v2_dp_tx_tbl[] = {
static const struct qmp_phy_init_tbl qcs615_dp_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
@ -555,14 +555,14 @@ static const struct qmp_usbc_offsets qmp_usbc_usb3dp_offsets_qcs615 = {
.dp_dp_phy = 0x1000,
};
static const u8 qmp_v2_dp_pre_emphasis_hbr2_rbr[4][4] = {
static const u8 qcs615_dp_pre_emphasis_hbr2_rbr[4][4] = {
{0x00, 0x0b, 0x12, 0xff},
{0x00, 0x0a, 0x12, 0xff},
{0x00, 0x0c, 0xff, 0xff},
{0xff, 0xff, 0xff, 0xff}
};
static const u8 qmp_v2_dp_voltage_swing_hbr2_rbr[4][4] = {
static const u8 qcs615_dp_voltage_swing_hbr2_rbr[4][4] = {
{0x07, 0x0f, 0x14, 0xff},
{0x11, 0x1d, 0x1f, 0xff},
{0x18, 0x1f, 0xff, 0xff},
@ -641,10 +641,10 @@ static const struct qmp_phy_cfg qcs615_usb3phy_cfg = {
.regs = qmp_v3_usb3phy_regs_layout_qcm2290,
};
static void qmp_v2_dp_aux_init(struct qmp_usbc *qmp);
static void qmp_v2_configure_dp_tx(struct qmp_usbc *qmp);
static int qmp_v2_configure_dp_phy(struct qmp_usbc *qmp);
static int qmp_v2_calibrate_dp_phy(struct qmp_usbc *qmp);
static void qcs615_qmp_dp_aux_init(struct qmp_usbc *qmp);
static void qcs615_qmp_configure_dp_tx(struct qmp_usbc *qmp);
static int qcs615_qmp_configure_dp_phy(struct qmp_usbc *qmp);
static int qcs615_qmp_calibrate_dp_phy(struct qmp_usbc *qmp);
static const struct qmp_phy_cfg qcs615_usb3dp_phy_cfg = {
.offsets = &qmp_usbc_usb3dp_offsets_qcs615,
@ -660,25 +660,25 @@ static const struct qmp_phy_cfg qcs615_usb3dp_phy_cfg = {
.regs = qmp_v3_usb3phy_regs_layout_qcm2290,
.dp_serdes_tbl = qmp_v2_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v2_dp_serdes_tbl),
.dp_tx_tbl = qmp_v2_dp_tx_tbl,
.dp_tx_tbl_num = ARRAY_SIZE(qmp_v2_dp_tx_tbl),
.dp_serdes_tbl = qcs615_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qcs615_dp_serdes_tbl),
.dp_tx_tbl = qcs615_dp_tx_tbl,
.dp_tx_tbl_num = ARRAY_SIZE(qcs615_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v2_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v2_dp_serdes_tbl_rbr),
.serdes_tbl_hbr = qmp_v2_dp_serdes_tbl_hbr,
.serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v2_dp_serdes_tbl_hbr),
.serdes_tbl_hbr2 = qmp_v2_dp_serdes_tbl_hbr2,
.serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v2_dp_serdes_tbl_hbr2),
.serdes_tbl_rbr = qcs615_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qcs615_dp_serdes_tbl_rbr),
.serdes_tbl_hbr = qcs615_dp_serdes_tbl_hbr,
.serdes_tbl_hbr_num = ARRAY_SIZE(qcs615_dp_serdes_tbl_hbr),
.serdes_tbl_hbr2 = qcs615_dp_serdes_tbl_hbr2,
.serdes_tbl_hbr2_num = ARRAY_SIZE(qcs615_dp_serdes_tbl_hbr2),
.swing_tbl = &qmp_v2_dp_voltage_swing_hbr2_rbr,
.pre_emphasis_tbl = &qmp_v2_dp_pre_emphasis_hbr2_rbr,
.swing_tbl = &qcs615_dp_voltage_swing_hbr2_rbr,
.pre_emphasis_tbl = &qcs615_dp_pre_emphasis_hbr2_rbr,
.dp_aux_init = qmp_v2_dp_aux_init,
.configure_dp_tx = qmp_v2_configure_dp_tx,
.configure_dp_phy = qmp_v2_configure_dp_phy,
.calibrate_dp_phy = qmp_v2_calibrate_dp_phy,
.dp_aux_init = qcs615_qmp_dp_aux_init,
.configure_dp_tx = qcs615_qmp_configure_dp_tx,
.configure_dp_phy = qcs615_qmp_configure_dp_phy,
.calibrate_dp_phy = qcs615_qmp_calibrate_dp_phy,
.reset_list = usb3dpphy_reset_l,
.num_resets = ARRAY_SIZE(usb3dpphy_reset_l),
@ -744,7 +744,7 @@ static int qmp_usbc_com_exit(struct phy *phy)
return 0;
}
static void qmp_v2_dp_aux_init(struct qmp_usbc *qmp)
static void qcs615_qmp_dp_aux_init(struct qmp_usbc *qmp)
{
writel(DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
@ -774,7 +774,7 @@ static void qmp_v2_dp_aux_init(struct qmp_usbc *qmp)
qmp->dp_dp_phy + QSERDES_V2_DP_PHY_AUX_INTERRUPT_MASK);
}
static int qmp_v2_configure_dp_swing(struct qmp_usbc *qmp)
static int qcs615_qmp_configure_dp_swing(struct qmp_usbc *qmp)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@ -864,7 +864,7 @@ static int qmp_usbc_configure_dp_clocks(struct qmp_usbc *qmp)
return 0;
}
static void qmp_v2_configure_dp_tx(struct qmp_usbc *qmp)
static void qcs615_qmp_configure_dp_tx(struct qmp_usbc *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
void __iomem *tx = qmp->dp_tx;
@ -884,10 +884,10 @@ static void qmp_v2_configure_dp_tx(struct qmp_usbc *qmp)
writel(0xc6, tx2 + QSERDES_V3_TX_LANE_MODE_1);
}
qmp_v2_configure_dp_swing(qmp);
qcs615_qmp_configure_dp_swing(qmp);
}
static int qmp_v2_configure_dp_phy(struct qmp_usbc *qmp)
static int qcs615_qmp_configure_dp_phy(struct qmp_usbc *qmp)
{
u32 status;
int ret;
@ -977,7 +977,7 @@ static int qmp_v2_configure_dp_phy(struct qmp_usbc *qmp)
return 0;
}
static int qmp_v2_calibrate_dp_phy(struct qmp_usbc *qmp)
static int qcs615_qmp_calibrate_dp_phy(struct qmp_usbc *qmp)
{
static const u8 cfg1_settings[] = {0x13, 0x23, 0x1d};
u8 val;