From c793a084ab3088744516aef437b4239d0d98623f Mon Sep 17 00:00:00 2001 From: Lucas Tanure Date: Sun, 23 Aug 2026 12:53:35 +0100 Subject: [PATCH] arm64: dts: amlogic: t7: khadas-vim4: allow the SD card to be power cycled SD cards start at 3.3V and switch to 1.8V to reach UHS-I speeds. Some cards refuse that switch, and the SD specification says the only way to recover is to power the card off and start again. SD_3V3 is marked regulator-always-on, so the supply never goes off, the card stays stuck half way through the switch, and the MMC core retries forever: mmc1: error -95 whilst initialising SD card Drop regulator-always-on. regulator-boot-on still turns the supply on at boot, and a card that refuses the switch now falls back to high speed instead of failing to initialise. Fixes: 8c45bf9ae4ef ("arm64: dts: amlogic: t7: khadas-vim4: Add power regulators") Signed-off-by: Lucas Tanure Assisted-by: Claude:claude-fable-5 Reviewed-by: Neil Armstrong Link: https://patch.msgid.link/20260823115335.102219-3-tanure@linux.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts index 75d81ad6830d..c94afaaf8826 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts @@ -71,7 +71,6 @@ sd_3v3: regulator-sdcard-3v3 { vin-supply = <&vddao_3v3>; gpio = <&gpio GPIOD_11 GPIO_ACTIVE_LOW>; regulator-boot-on; - regulator-always-on; }; sdio_pwrseq: sdio-pwrseq {