github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-08-02 05:12:01 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes

Browse Source 
Add complete SD card controller support with UHS high-speed modes.

- Enable sdhci0 controller with 4-bit bus width
- Configure card detect GPIO with GPIO_ACTIVE_LOW and internal pull-up
  support
- Connect vmmc-supply to buck4 for 3.3V card power
- Connect vqmmc-supply to aldo1 for 1.8V/3.3V I/O switching
- Add dual pinctrl states for voltage-dependent pin configuration
- Support UHS-I SDR25, SDR50, and SDR104 modes
- Add stable MMC device aliases (mmc0 = eMMC, mmc1 = SD card)

This enables full SD card functionality including high-speed UHS modes
for improved performance.

Suggested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://patch.msgid.link/20260515-orangepi-sd-card-uhs-v10-3-094af27e310d@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
This commit is contained in:
Iker Pedrosa 2026-05-15 12:49:01 +02:00 committed by Yixun Lan
parent 2585c60ce2
commit c76e2f058c
1 changed files with 22 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
View File

@ -17,6 +17,8 @@ aliases {
spi3 = &spi3;
i2c2 = &i2c2;
i2c8 = &i2c8;
mmc0 = &emmc;
mmc1 = &sdhci0;
};
chosen {
@ -221,7 +223,7 @@ buck3_1v8: buck3 {
regulator-always-on;
};
buck4 {
buck4: buck4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <5000>;
@ -242,7 +244,7 @@ buck6 {
regulator-always-on;
};
aldo1 {
aldo1: aldo1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@ -374,3 +376,21 @@ hub_3_0: hub@2 {
reset-gpios = <&gpio K1_GPIO(124) GPIO_ACTIVE_LOW>;
};
};
&sdhci0 {
pinctrl-names = "default", "uhs";
pinctrl-0 = <&mmc1_cfg>;
pinctrl-1 = <&mmc1_uhs_cfg>;
bus-width = <4>;
cd-gpios = <&gpio K1_GPIO(80) (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
no-mmc;
no-sdio;
disable-wp;
cap-sd-highspeed;
vmmc-supply = <&buck4>;
vqmmc-supply = <&aldo1>;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};