Snap for 8912470 from 9ba9c267b2 to android-mainline-keystone-qcom-release

Change-Id: I6618a44709f19ffb1fc78a82644883aba2c0a343

.mailmap

@@ -60,6 +60,10 @@ Arnd Bergmann <arnd@arndb.de>
 Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
 Axel Dyks <xl@xlsigned.net>
 Axel Lin <axel.lin@gmail.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@linaro.org>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@spreadtrum.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@unisoc.com>
+Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang7@gmail.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
 Ben Gardner <bgardner@wabtec.com>
@@ -135,6 +139,8 @@ Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
 Frank Zago <fzago@systemfabricworks.com>
 Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
+Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
+Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
@@ -371,6 +377,7 @@ Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
+Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>

CREDITS

@@ -627,6 +627,10 @@ S: 48287 Sawleaf
 S: Fremont, California 94539
 S: USA
 
+N: Tomas Cech
+E: sleep_walker@suse.com
+D: arm/palm treo support
+
 N: Florent Chabaud
 E: florent.chabaud@polytechnique.org
 D: software suspend

Documentation/admin-guide/kernel-parameters.txt

@@ -3184,6 +3184,7 @@
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
 					       mmio_stale_data=off [X86]
+					       retbleed=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3206,6 +3207,7 @@
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
 					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -5804,6 +5806,24 @@
 			expediting.  Set to zero to disable automatic
 			expediting.
 
+	srcutree.srcu_max_nodelay [KNL]
+			Specifies the number of no-delay instances
+			per jiffy for which the SRCU grace period
+			worker thread will be rescheduled with zero
+			delay. Beyond this limit, worker thread will
+			be rescheduled with a sleep delay of one jiffy.
+
+	srcutree.srcu_max_nodelay_phase [KNL]
+			Specifies the per-grace-period phase, number of
+			non-sleeping polls of readers. Beyond this limit,
+			grace period worker thread will be rescheduled
+			with a sleep delay of one jiffy, between each
+			rescan of the readers, for a grace period phase.
+
+	srcutree.srcu_retry_check_delay [KNL]
+			Specifies number of microseconds of non-sleeping
+			delay between each non-sleeping poll of readers.
+
 	srcutree.small_contention_lim [KNL]
 			Specifies the number of update-side contention
 			events per jiffy will be tolerated before

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml

@@ -94,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -167,10 +167,8 @@ properties:
       - in-band-status
 
   fixed-link:
-    allOf:
+    oneOf:
-      - if:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
-          type: array
-        then:
         deprecated: true
         items:
           - minimum: 0
@@ -196,11 +194,8 @@ properties:
             description:
               Asymmetric pause configuration. 0 for no asymmetric
               pause, 1 for asymmetric pause
-
+      - type: object
-
+        additionalProperties: false
-      - if:
-          type: object
-        then:
         properties:
           speed:
             description:

Documentation/devicetree/bindings/net/fsl,fec.yaml

@@ -183,6 +183,7 @@ properties:
       Should specify the gpio for phy reset.
 
   phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Reset duration in milliseconds.  Should present only if property
@@ -191,12 +192,14 @@ properties:
       and 1 millisecond will be used instead.
 
   phy-reset-active-high:
+    type: boolean
     deprecated: true
     description:
       If present then the reset sequence using the GPIO specified in the
       "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
 
   phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay

Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Atheros ath9k wireless devices Generic Binding
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Toke Høiland-Jørgensen <toke@toke.dk>
 
 description: |
   This node provides properties for configuring the ath9k wireless device.

Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

@@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies ath11k wireless devices Generic Binding
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Kalle Valo <kvalo@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax

Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml

@@ -25,12 +25,12 @@ properties:
       - qcom,sc7280-lpass-cpu
 
   reg:
-    minItems: 2
+    minItems: 1
     maxItems: 6
     description: LPAIF core registers
 
   reg-names:
-    minItems: 2
+    minItems: 1
     maxItems: 6
 
   clocks:
@@ -42,12 +42,12 @@ properties:
     maxItems: 10
 
   interrupts:
-    minItems: 2
+    minItems: 1
     maxItems: 4
     description: LPAIF DMA buffer interrupt
 
   interrupt-names:
-    minItems: 2
+    minItems: 1
     maxItems: 4
 
   qcom,adsp:

Documentation/filesystems/netfs_library.rst

@@ -301,7 +301,7 @@ through which it can issue requests and negotiate::
 		void (*issue_read)(struct netfs_io_subrequest *subreq);
 		bool (*is_still_valid)(struct netfs_io_request *rreq);
 		int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
-					 struct folio *folio, void **_fsdata);
+					 struct folio **foliop, void **_fsdata);
 		void (*done)(struct netfs_io_request *rreq);
 	};
 
@@ -381,8 +381,10 @@ The operations are as follows:
    allocated/grabbed the folio to be modified to allow the filesystem to flush
    conflicting state before allowing it to be modified.
 
-   It should return 0 if everything is now fine, -EAGAIN if the folio should be
+   It may unlock and discard the folio it was given and set the caller's folio
-   regrabbed and any other error code to abort the operation.
+   pointer to NULL.  It should return 0 if everything is now fine (``*foliop``
+   left set) or the op should be retried (``*foliop`` cleared) and any other
+   error code to abort the operation.
 
  * ``done``
 

Documentation/networking/dsa/dsa.rst

@@ -503,26 +503,108 @@ per-port PHY specific details: interface connection, MDIO bus location, etc.
 Driver development
 ==================
 
-DSA switch drivers need to implement a dsa_switch_ops structure which will
+DSA switch drivers need to implement a ``dsa_switch_ops`` structure which will
 contain the various members described below.
 
-``register_switch_driver()`` registers this dsa_switch_ops in its internal list
+Probing, registration and device lifetime
-of drivers to probe for. ``unregister_switch_driver()`` does the exact opposite.
+-----------------------------------------
 
-Unless requested differently by setting the priv_size member accordingly, DSA
+DSA switches are regular ``device`` structures on buses (be they platform, SPI,
-does not allocate any driver private context space.
+I2C, MDIO or otherwise). The DSA framework is not involved in their probing
+with the device core.
+
+Switch registration from the perspective of a driver means passing a valid
+``struct dsa_switch`` pointer to ``dsa_register_switch()``, usually from the
+switch driver's probing function. The following members must be valid in the
+provided structure:
+
+- ``ds->dev``: will be used to parse the switch's OF node or platform data.
+
+- ``ds->num_ports``: will be used to create the port list for this switch, and
+  to validate the port indices provided in the OF node.
+
+- ``ds->ops``: a pointer to the ``dsa_switch_ops`` structure holding the DSA
+  method implementations.
+
+- ``ds->priv``: backpointer to a driver-private data structure which can be
+  retrieved in all further DSA method callbacks.
+
+In addition, the following flags in the ``dsa_switch`` structure may optionally
+be configured to obtain driver-specific behavior from the DSA core. Their
+behavior when set is documented through comments in ``include/net/dsa.h``.
+
+- ``ds->vlan_filtering_is_global``
+
+- ``ds->needs_standalone_vlan_filtering``
+
+- ``ds->configure_vlan_while_not_filtering``
+
+- ``ds->untag_bridge_pvid``
+
+- ``ds->assisted_learning_on_cpu_port``
+
+- ``ds->mtu_enforcement_ingress``
+
+- ``ds->fdb_isolation``
+
+Internally, DSA keeps an array of switch trees (group of switches) global to
+the kernel, and attaches a ``dsa_switch`` structure to a tree on registration.
+The tree ID to which the switch is attached is determined by the first u32
+number of the ``dsa,member`` property of the switch's OF node (0 if missing).
+The switch ID within the tree is determined by the second u32 number of the
+same OF property (0 if missing). Registering multiple switches with the same
+switch ID and tree ID is illegal and will cause an error. Using platform data,
+a single switch and a single switch tree is permitted.
+
+In case of a tree with multiple switches, probing takes place asymmetrically.
+The first N-1 callers of ``dsa_register_switch()`` only add their ports to the
+port list of the tree (``dst->ports``), each port having a backpointer to its
+associated switch (``dp->ds``). Then, these switches exit their
+``dsa_register_switch()`` call early, because ``dsa_tree_setup_routing_table()``
+has determined that the tree is not yet complete (not all ports referenced by
+DSA links are present in the tree's port list). The tree becomes complete when
+the last switch calls ``dsa_register_switch()``, and this triggers the effective
+continuation of initialization (including the call to ``ds->ops->setup()``) for
+all switches within that tree, all as part of the calling context of the last
+switch's probe function.
+
+The opposite of registration takes place when calling ``dsa_unregister_switch()``,
+which removes a switch's ports from the port list of the tree. The entire tree
+is torn down when the first switch unregisters.
+
+It is mandatory for DSA switch drivers to implement the ``shutdown()`` callback
+of their respective bus, and call ``dsa_switch_shutdown()`` from it (a minimal
+version of the full teardown performed by ``dsa_unregister_switch()``).
+The reason is that DSA keeps a reference on the master net device, and if the
+driver for the master device decides to unbind on shutdown, DSA's reference
+will block that operation from finalizing.
+
+Either ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` must be called,
+but not both, and the device driver model permits the bus' ``remove()`` method
+to be called even if ``shutdown()`` was already called. Therefore, drivers are
+expected to implement a mutual exclusion method between ``remove()`` and
+``shutdown()`` by setting their drvdata to NULL after any of these has run, and
+checking whether the drvdata is NULL before proceeding to take any action.
+
+After ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` was called, no
+further callbacks via the provided ``dsa_switch_ops`` may take place, and the
+driver may free the data structures associated with the ``dsa_switch``.
 
 Switch configuration
 --------------------
 
-- ``tag_protocol``: this is to indicate what kind of tagging protocol is supported,
+- ``get_tag_protocol``: this is to indicate what kind of tagging protocol is
-  should be a valid value from the ``dsa_tag_protocol`` enum
+  supported, should be a valid value from the ``dsa_tag_protocol`` enum.
+  The returned information does not have to be static; the driver is passed the
+  CPU port number, as well as the tagging protocol of a possibly stacked
+  upstream switch, in case there are hardware limitations in terms of supported
+  tag formats.
 
-- ``probe``: probe routine which will be invoked by the DSA platform device upon
+- ``change_tag_protocol``: when the default tagging protocol has compatibility
-  registration to test for the presence/absence of a switch device. For MDIO
+  problems with the master or other issues, the driver may support changing it
-  devices, it is recommended to issue a read towards internal registers using
+  at runtime, either through a device tree property or through sysfs. In that
-  the switch pseudo-PHY and return whether this is a supported device. For other
+  case, further calls to ``get_tag_protocol`` should report the protocol in
-  buses, return a non-NULL string
+  current use.
 
 - ``setup``: setup function for the switch, this function is responsible for setting
   up the ``dsa_switch_ops`` private structure with all it needs: register maps,
@@ -535,7 +617,17 @@ Switch configuration
   fully configured and ready to serve any kind of request. It is recommended
   to issue a software reset of the switch during this setup function in order to
   avoid relying on what a previous software agent such as a bootloader/firmware
-  may have previously configured.
+  may have previously configured. The method responsible for undoing any
+  applicable allocations or operations done here is ``teardown``.
+
+- ``port_setup`` and ``port_teardown``: methods for initialization and
+  destruction of per-port data structures. It is mandatory for some operations
+  such as registering and unregistering devlink port regions to be done from
+  these methods, otherwise they are optional. A port will be torn down only if
+  it has been previously set up. It is possible for a port to be set up during
+  probing only to be torn down immediately afterwards, for example in case its
+  PHY cannot be found. In this case, probing of the DSA switch continues
+  without that particular port.
 
 PHY devices and link management
 -------------------------------
@@ -635,26 +727,198 @@ Power management
   ``BR_STATE_DISABLED`` and propagating changes to the hardware if this port is
   disabled while being a bridge member
 
+Address databases
+-----------------
+
+Switching hardware is expected to have a table for FDB entries, however not all
+of them are active at the same time. An address database is the subset (partition)
+of FDB entries that is active (can be matched by address learning on RX, or FDB
+lookup on TX) depending on the state of the port. An address database may
+occasionally be called "FID" (Filtering ID) in this document, although the
+underlying implementation may choose whatever is available to the hardware.
+
+For example, all ports that belong to a VLAN-unaware bridge (which is
+*currently* VLAN-unaware) are expected to learn source addresses in the
+database associated by the driver with that bridge (and not with other
+VLAN-unaware bridges). During forwarding and FDB lookup, a packet received on a
+VLAN-unaware bridge port should be able to find a VLAN-unaware FDB entry having
+the same MAC DA as the packet, which is present on another port member of the
+same bridge. At the same time, the FDB lookup process must be able to not find
+an FDB entry having the same MAC DA as the packet, if that entry points towards
+a port which is a member of a different VLAN-unaware bridge (and is therefore
+associated with a different address database).
+
+Similarly, each VLAN of each offloaded VLAN-aware bridge should have an
+associated address database, which is shared by all ports which are members of
+that VLAN, but not shared by ports belonging to different bridges that are
+members of the same VID.
+
+In this context, a VLAN-unaware database means that all packets are expected to
+match on it irrespective of VLAN ID (only MAC address lookup), whereas a
+VLAN-aware database means that packets are supposed to match based on the VLAN
+ID from the classified 802.1Q header (or the pvid if untagged).
+
+At the bridge layer, VLAN-unaware FDB entries have the special VID value of 0,
+whereas VLAN-aware FDB entries have non-zero VID values. Note that a
+VLAN-unaware bridge may have VLAN-aware (non-zero VID) FDB entries, and a
+VLAN-aware bridge may have VLAN-unaware FDB entries. As in hardware, the
+software bridge keeps separate address databases, and offloads to hardware the
+FDB entries belonging to these databases, through switchdev, asynchronously
+relative to the moment when the databases become active or inactive.
+
+When a user port operates in standalone mode, its driver should configure it to
+use a separate database called a port private database. This is different from
+the databases described above, and should impede operation as standalone port
+(packet in, packet out to the CPU port) as little as possible. For example,
+on ingress, it should not attempt to learn the MAC SA of ingress traffic, since
+learning is a bridging layer service and this is a standalone port, therefore
+it would consume useless space. With no address learning, the port private
+database should be empty in a naive implementation, and in this case, all
+received packets should be trivially flooded to the CPU port.
+
+DSA (cascade) and CPU ports are also called "shared" ports because they service
+multiple address databases, and the database that a packet should be associated
+to is usually embedded in the DSA tag. This means that the CPU port may
+simultaneously transport packets coming from a standalone port (which were
+classified by hardware in one address database), and from a bridge port (which
+were classified to a different address database).
+
+Switch drivers which satisfy certain criteria are able to optimize the naive
+configuration by removing the CPU port from the flooding domain of the switch,
+and just program the hardware with FDB entries pointing towards the CPU port
+for which it is known that software is interested in those MAC addresses.
+Packets which do not match a known FDB entry will not be delivered to the CPU,
+which will save CPU cycles required for creating an skb just to drop it.
+
+DSA is able to perform host address filtering for the following kinds of
+addresses:
+
+- Primary unicast MAC addresses of ports (``dev->dev_addr``). These are
+  associated with the port private database of the respective user port,
+  and the driver is notified to install them through ``port_fdb_add`` towards
+  the CPU port.
+
+- Secondary unicast and multicast MAC addresses of ports (addresses added
+  through ``dev_uc_add()`` and ``dev_mc_add()``). These are also associated
+  with the port private database of the respective user port.
+
+- Local/permanent bridge FDB entries (``BR_FDB_LOCAL``). These are the MAC
+  addresses of the bridge ports, for which packets must be terminated locally
+  and not forwarded. They are associated with the address database for that
+  bridge.
+
+- Static bridge FDB entries installed towards foreign (non-DSA) interfaces
+  present in the same bridge as some DSA switch ports. These are also
+  associated with the address database for that bridge.
+
+- Dynamically learned FDB entries on foreign interfaces present in the same
+  bridge as some DSA switch ports, only if ``ds->assisted_learning_on_cpu_port``
+  is set to true by the driver. These are associated with the address database
+  for that bridge.
+
+For various operations detailed below, DSA provides a ``dsa_db`` structure
+which can be of the following types:
+
+- ``DSA_DB_PORT``: the FDB (or MDB) entry to be installed or deleted belongs to
+  the port private database of user port ``db->dp``.
+- ``DSA_DB_BRIDGE``: the entry belongs to one of the address databases of bridge
+  ``db->bridge``. Separation between the VLAN-unaware database and the per-VID
+  databases of this bridge is expected to be done by the driver.
+- ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``.
+  Note: ``DSA_DB_LAG`` is currently unused and may be removed in the future.
+
+The drivers which act upon the ``dsa_db`` argument in ``port_fdb_add``,
+``port_mdb_add`` etc should declare ``ds->fdb_isolation`` as true.
+
+DSA associates each offloaded bridge and each offloaded LAG with a one-based ID
+(``struct dsa_bridge :: num``, ``struct dsa_lag :: id``) for the purposes of
+refcounting addresses on shared ports. Drivers may piggyback on DSA's numbering
+scheme (the ID is readable through ``db->bridge.num`` and ``db->lag.id`` or may
+implement their own.
+
+Only the drivers which declare support for FDB isolation are notified of FDB
+entries on the CPU port belonging to ``DSA_DB_PORT`` databases.
+For compatibility/legacy reasons, ``DSA_DB_BRIDGE`` addresses are notified to
+drivers even if they do not support FDB isolation. However, ``db->bridge.num``
+and ``db->lag.id`` are always set to 0 in that case (to denote the lack of
+isolation, for refcounting purposes).
+
+Note that it is not mandatory for a switch driver to implement physically
+separate address databases for each standalone user port. Since FDB entries in
+the port private databases will always point to the CPU port, there is no risk
+for incorrect forwarding decisions. In this case, all standalone ports may
+share the same database, but the reference counting of host-filtered addresses
+(not deleting the FDB entry for a port's MAC address if it's still in use by
+another port) becomes the responsibility of the driver, because DSA is unaware
+that the port databases are in fact shared. This can be achieved by calling
+``dsa_fdb_present_in_other_db()`` and ``dsa_mdb_present_in_other_db()``.
+The down side is that the RX filtering lists of each user port are in fact
+shared, which means that user port A may accept a packet with a MAC DA it
+shouldn't have, only because that MAC address was in the RX filtering list of
+user port B. These packets will still be dropped in software, however.
+
 Bridge layer
 ------------
 
+Offloading the bridge forwarding plane is optional and handled by the methods
+below. They may be absent, return -EOPNOTSUPP, or ``ds->max_num_bridges`` may
+be non-zero and exceeded, and in this case, joining a bridge port is still
+possible, but the packet forwarding will take place in software, and the ports
+under a software bridge must remain configured in the same way as for
+standalone operation, i.e. have all bridging service functions (address
+learning etc) disabled, and send all received packets to the CPU port only.
+
+Concretely, a port starts offloading the forwarding plane of a bridge once it
+returns success to the ``port_bridge_join`` method, and stops doing so after
+``port_bridge_leave`` has been called. Offloading the bridge means autonomously
+learning FDB entries in accordance with the software bridge port's state, and
+autonomously forwarding (or flooding) received packets without CPU intervention.
+This is optional even when offloading a bridge port. Tagging protocol drivers
+are expected to call ``dsa_default_offload_fwd_mark(skb)`` for packets which
+have already been autonomously forwarded in the forwarding domain of the
+ingress switch port. DSA, through ``dsa_port_devlink_setup()``, considers all
+switch ports part of the same tree ID to be part of the same bridge forwarding
+domain (capable of autonomous forwarding to each other).
+
+Offloading the TX forwarding process of a bridge is a distinct concept from
+simply offloading its forwarding plane, and refers to the ability of certain
+driver and tag protocol combinations to transmit a single skb coming from the
+bridge device's transmit function to potentially multiple egress ports (and
+thereby avoid its cloning in software).
+
+Packets for which the bridge requests this behavior are called data plane
+packets and have ``skb->offload_fwd_mark`` set to true in the tag protocol
+driver's ``xmit`` function. Data plane packets are subject to FDB lookup,
+hardware learning on the CPU port, and do not override the port STP state.
+Additionally, replication of data plane packets (multicast, flooding) is
+handled in hardware and the bridge driver will transmit a single skb for each
+packet that may or may not need replication.
+
+When the TX forwarding offload is enabled, the tag protocol driver is
+responsible to inject packets into the data plane of the hardware towards the
+correct bridging domain (FID) that the port is a part of. The port may be
+VLAN-unaware, and in this case the FID must be equal to the FID used by the
+driver for its VLAN-unaware address database associated with that bridge.
+Alternatively, the bridge may be VLAN-aware, and in that case, it is guaranteed
+that the packet is also VLAN-tagged with the VLAN ID that the bridge processed
+this packet in. It is the responsibility of the hardware to untag the VID on
+the egress-untagged ports, or keep the tag on the egress-tagged ones.
+
 - ``port_bridge_join``: bridge layer function invoked when a given switch port is
   added to a bridge, this function should do what's necessary at the switch
   level to permit the joining port to be added to the relevant logical
   domain for it to ingress/egress traffic with other members of the bridge.
+  By setting the ``tx_fwd_offload`` argument to true, the TX forwarding process
+  of this bridge is also offloaded.
 
 - ``port_bridge_leave``: bridge layer function invoked when a given switch port is
   removed from a bridge, this function should do what's necessary at the
   switch level to deny the leaving port from ingress/egress traffic from the
-  remaining bridge members. When the port leaves the bridge, it should be aged
+  remaining bridge members.
-  out at the switch hardware for the switch to (re) learn MAC addresses behind
-  this port.
 
 - ``port_stp_state_set``: bridge layer function invoked when a given switch port STP
   state is computed by the bridge layer and should be propagated to switch
-  hardware to forward/block/learn traffic. The switch driver is responsible for
+  hardware to forward/block/learn traffic.
-  computing a STP state change based on current and asked parameters and perform
-  the relevant ageing based on the intersection results
 
 - ``port_bridge_flags``: bridge layer function invoked when a port must
   configure its settings for e.g. flooding of unknown traffic or source address
@@ -667,21 +931,11 @@ Bridge layer
   CPU port, and flooding towards the CPU port should also be enabled, due to a
   lack of an explicit address filtering mechanism in the DSA core.
 
-- ``port_bridge_tx_fwd_offload``: bridge layer function invoked after
+- ``port_fast_age``: bridge layer function invoked when flushing the
-  ``port_bridge_join`` when a driver sets ``ds->num_fwd_offloading_bridges`` to
+  dynamically learned FDB entries on the port is necessary. This is called when
-  a non-zero value. Returning success in this function activates the TX
+  transitioning from an STP state where learning should take place to an STP
-  forwarding offload bridge feature for this port, which enables the tagging
+  state where it shouldn't, or when leaving a bridge, or when address learning
-  protocol driver to inject data plane packets towards the bridging domain that
+  is turned off via ``port_bridge_flags``.
-  the port is a part of. Data plane packets are subject to FDB lookup, hardware
-  learning on the CPU port, and do not override the port STP state.
-  Additionally, replication of data plane packets (multicast, flooding) is
-  handled in hardware and the bridge driver will transmit a single skb for each
-  packet that needs replication. The method is provided as a configuration
-  point for drivers that need to configure the hardware for enabling this
-  feature.
-
-- ``port_bridge_tx_fwd_unoffload``: bridge layer function invoked when a driver
-  leaves a bridge port which had the TX forwarding offload feature enabled.
 
 Bridge VLAN filtering
 ---------------------
@@ -697,55 +951,44 @@ Bridge VLAN filtering
   allowed.
 
 - ``port_vlan_add``: bridge layer function invoked when a VLAN is configured
-  (tagged or untagged) for the given switch port. If the operation is not
+  (tagged or untagged) for the given switch port. The CPU port becomes a member
-  supported by the hardware, this function should return ``-EOPNOTSUPP`` to
+  of a VLAN only if a foreign bridge port is also a member of it (and
-  inform the bridge code to fallback to a software implementation.
+  forwarding needs to take place in software), or the VLAN is installed to the
+  VLAN group of the bridge device itself, for termination purposes
+  (``bridge vlan add dev br0 vid 100 self``). VLANs on shared ports are
+  reference counted and removed when there is no user left. Drivers do not need
+  to manually install a VLAN on the CPU port.
 
 - ``port_vlan_del``: bridge layer function invoked when a VLAN is removed from the
   given switch port
 
-- ``port_vlan_dump``: bridge layer function invoked with a switchdev callback
-  function that the driver has to call for each VLAN the given port is a member
-  of. A switchdev object is used to carry the VID and bridge flags.
-
 - ``port_fdb_add``: bridge layer function invoked when the bridge wants to install a
   Forwarding Database entry, the switch hardware should be programmed with the
   specified address in the specified VLAN Id in the forwarding database
-  associated with this VLAN ID. If the operation is not supported, this
+  associated with this VLAN ID.
-  function should return ``-EOPNOTSUPP`` to inform the bridge code to fallback to
-  a software implementation.
-
-.. note:: VLAN ID 0 corresponds to the port private database, which, in the context
-        of DSA, would be its port-based VLAN, used by the associated bridge device.
 
 - ``port_fdb_del``: bridge layer function invoked when the bridge wants to remove a
   Forwarding Database entry, the switch hardware should be programmed to delete
   the specified MAC address from the specified VLAN ID if it was mapped into
   this port forwarding database
 
-- ``port_fdb_dump``: bridge layer function invoked with a switchdev callback
+- ``port_fdb_dump``: bridge bypass function invoked by ``ndo_fdb_dump`` on the
-  function that the driver has to call for each MAC address known to be behind
+  physical DSA port interfaces. Since DSA does not attempt to keep in sync its
-  the given port. A switchdev object is used to carry the VID and FDB info.
+  hardware FDB entries with the software bridge, this method is implemented as
+  a means to view the entries visible on user ports in the hardware database.
+  The entries reported by this function have the ``self`` flag in the output of
+  the ``bridge fdb show`` command.
 
 - ``port_mdb_add``: bridge layer function invoked when the bridge wants to install
-  a multicast database entry. If the operation is not supported, this function
+  a multicast database entry. The switch hardware should be programmed with the
-  should return ``-EOPNOTSUPP`` to inform the bridge code to fallback to a
-  software implementation. The switch hardware should be programmed with the
   specified address in the specified VLAN ID in the forwarding database
   associated with this VLAN ID.
 
-.. note:: VLAN ID 0 corresponds to the port private database, which, in the context
-        of DSA, would be its port-based VLAN, used by the associated bridge device.
-
 - ``port_mdb_del``: bridge layer function invoked when the bridge wants to remove a
   multicast database entry, the switch hardware should be programmed to delete
   the specified MAC address from the specified VLAN ID if it was mapped into
   this port forwarding database.
 
-- ``port_mdb_dump``: bridge layer function invoked with a switchdev callback
-  function that the driver has to call for each MAC address known to be behind
-  the given port. A switchdev object is used to carry the VID and MDB info.
-
 Link aggregation
 ----------------
 

Documentation/networking/ip-sysctl.rst

@@ -1052,11 +1052,7 @@ udp_rmem_min - INTEGER
 	Default: 4K
 
 udp_wmem_min - INTEGER
-	Minimal size of send buffer used by UDP sockets in moderation.
+	UDP does not have tx memory accounting and this tunable has no effect.
-	Each UDP socket is able to use the size for sending data, even if
-	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
-
-	Default: 4K
 
 RAW variables
 =============
@@ -1085,7 +1081,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -1179,7 +1175,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -2870,7 +2866,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00

Documentation/sound/soc/dai.rst

@@ -10,7 +10,7 @@ AC97
 ====
 
 AC97 is a five wire interface commonly found on many PC sound cards. It is
-now also popular in many portable devices. This DAI has a reset line and time
+now also popular in many portable devices. This DAI has a RESET line and time
 multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines.
 The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the
 frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97

Documentation/virt/kvm/api.rst

@@ -5657,7 +5657,8 @@ by a string of size ``name_size``.
 	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
-	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
+	#define KVM_STATS_UNIT_BOOLEAN		(0x4 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_BOOLEAN
 
 	#define KVM_STATS_BASE_SHIFT		8
 	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
@@ -5702,14 +5703,13 @@ Bits 0-3 of ``flags`` encode the type:
     by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``)
     is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last
     bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity
-    value.) The bucket value indicates how many samples fell in the bucket's range.
+    value.)
   * ``KVM_STATS_TYPE_LOG_HIST``
     The statistic is reported as a logarithmic histogram. The number of
     buckets is specified by the ``size`` field. The range of the first bucket is
     [0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF).
     Otherwise, The Nth bucket (1 < N < ``size``) covers
-    [pow(2, N-2), pow(2, N-1)). The bucket value indicates how many samples fell
+    [pow(2, N-2), pow(2, N-1)).
-    in the bucket's range.
 
 Bits 4-7 of ``flags`` encode the unit:
 
@@ -5724,6 +5724,15 @@ Bits 4-7 of ``flags`` encode the unit:
     It indicates that the statistics data is used to measure time or latency.
   * ``KVM_STATS_UNIT_CYCLES``
     It indicates that the statistics data is used to measure CPU clock cycles.
+  * ``KVM_STATS_UNIT_BOOLEAN``
+    It indicates that the statistic will always be either 0 or 1.  Boolean
+    statistics of "peak" type will never go back from 1 to 0.  Boolean
+    statistics can be linear histograms (with two buckets) but not logarithmic
+    histograms.
+
+Note that, in the case of histograms, the unit applies to the bucket
+ranges, while the bucket value indicates how many samples fell in the
+bucket's range.
 
 Bits 8-11 of ``flags``, together with ``exponent``, encode the scale of the
 unit:
@@ -5746,7 +5755,7 @@ the corresponding statistics data.
 
 The ``bucket_size`` field is used as a parameter for histogram statistics data.
 It is only used by linear histogram statistics data, specifying the size of a
-bucket.
+bucket in the unit expressed by bits 4-11 of ``flags`` together with ``exponent``.
 
 The ``name`` field is the name string of the statistics data. The name string
 starts at the end of ``struct kvm_stats_desc``.  The maximum length including

MAINTAINERS

@@ -1038,6 +1038,7 @@ F:	arch/arm64/boot/dts/amd/
 
 AMD XGBE DRIVER
 M:	Tom Lendacky <thomas.lendacky@amd.com>
+M:	"Shyam Sundar S K" <Shyam-sundar.S-k@amd.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
@@ -2497,10 +2498,8 @@ F:	drivers/power/reset/oxnas-restart.c
 N:	oxnas
 
 ARM/PALM TREO SUPPORT
-M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Orphan
-W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmtreo.*
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
@@ -7486,6 +7485,8 @@ F:	include/video/s1d13xxxfb.h
 EROFS FILE SYSTEM
 M:	Gao Xiang <xiang@kernel.org>
 M:	Chao Yu <chao@kernel.org>
+R:	Yue Hu <huyue2@coolpad.com>
+R:	Jeffle Xu <jefflexu@linux.alibaba.com>
 L:	linux-erofs@lists.ozlabs.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
@@ -14370,7 +14371,8 @@ S:	Maintained
 F:	drivers/net/phy/nxp-c45-tja11xx.c
 
 NXP FSPI DRIVER
-M:	Ashish Kumar <ashish.kumar@nxp.com>
+M:	Han Xu <han.xu@nxp.com>
+M:	Haibo Chen <haibo.chen@nxp.com>
 R:	Yogesh Gaur <yogeshgaur.83@gmail.com>
 L:	linux-spi@vger.kernel.org
 S:	Maintained
@@ -15856,7 +15858,7 @@ PIN CONTROLLER - FREESCALE
 M:	Dong Aisheng <aisheng.dong@nxp.com>
 M:	Fabio Estevam <festevam@gmail.com>
 M:	Shawn Guo <shawnguo@kernel.org>
-M:	Stefan Agner <stefan@agner.ch>
+M:	Jacky Bai <ping.bai@nxp.com>
 R:	Pengutronix Kernel Team <kernel@pengutronix.de>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
@@ -17280,12 +17282,15 @@ N:	riscv
 K:	riscv
 
 RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
-M:	Lewis Hanly <lewis.hanly@microchip.com>
 M:	Conor Dooley <conor.dooley@microchip.com>
+M:	Daire McNamara <daire.mcnamara@microchip.com>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
 F:	arch/riscv/boot/dts/microchip/
+F:	drivers/char/hw_random/mpfs-rng.c
+F:	drivers/clk/microchip/clk-mpfs.c
 F:	drivers/mailbox/mailbox-mpfs.c
+F:	drivers/pci/controller/pcie-microchip-host.c
 F:	drivers/soc/microchip/
 F:	include/soc/microchip/mpfs.h
 

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Superb Owl
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -438,6 +438,13 @@ config MMU_GATHER_PAGE_SIZE
 
 config MMU_GATHER_NO_RANGE
 	bool
+	select MMU_GATHER_MERGE_VMAS
+
+config MMU_GATHER_NO_FLUSH_CACHE
+	bool
+
+config MMU_GATHER_MERGE_VMAS
+	bool
 
 config MMU_GATHER_NO_GATHER
 	bool

arch/arm/boot/dts/imx6qdl-ts7970.dtsi

@@ -226,7 +226,7 @@ gpio8: gpio@28 {
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {

arch/arm/boot/dts/imx6ull-colibri.dtsi

@@ -166,7 +166,7 @@ &i2c1 {
 	atmel_mxt_ts: touchscreen@4a {
 		compatible = "atmel,maxtouch";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn>;
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
 		reg = <0x4a>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
@@ -331,7 +331,6 @@ MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
 	pinctrl_atmel_conn: atmelconngrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
@@ -684,6 +683,12 @@ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
 };
 
 &iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
 	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */

arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi

@@ -87,22 +87,22 @@ &mdio0 {
 
 	phy4: ethernet-phy@5 {
 		reg = <5>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy5: ethernet-phy@6 {
 		reg = <6>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy6: ethernet-phy@7 {
 		reg = <7>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy7: ethernet-phy@8 {
 		reg = <8>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 };
 

arch/arm/boot/dts/lan966x.dtsi

@@ -38,7 +38,7 @@ clocks {
 		sys_clk: sys_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <162500000>;
+			clock-frequency = <165625000>;
 		};
 
 		cpu_clk: cpu_clk {

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -506,6 +506,8 @@ blsp1_uart2: serial@f991e000 {
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
 			status = "disabled";
 		};
 
@@ -581,6 +583,9 @@ blsp2_uart1: serial@f995d000 {
 			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
 			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -599,6 +604,8 @@ blsp2_uart4: serial@f9960000 {
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
 			status = "disabled";
 		};
 
@@ -639,6 +646,9 @@ blsp2_i2c6: i2c@f9968000 {
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -1256,7 +1266,7 @@ cd {
 				};
 			};
 
-			blsp1_uart2_active: blsp1-uart2-active {
+			blsp1_uart2_default: blsp1-uart2-default {
 				rx {
 					pins = "gpio5";
 					function = "blsp_uart2";
@@ -1272,7 +1282,7 @@ tx {
 				};
 			};
 
-			blsp2_uart1_active: blsp2-uart1-active {
+			blsp2_uart1_default: blsp2-uart1-default {
 				tx-rts {
 					pins = "gpio41", "gpio44";
 					function = "blsp_uart7";
@@ -1295,7 +1305,7 @@ blsp2_uart1_sleep: blsp2-uart1-sleep {
 				bias-pull-down;
 			};
 
-			blsp2_uart4_active: blsp2-uart4-active {
+			blsp2_uart4_default: blsp2-uart4-default {
 				tx-rts {
 					pins = "gpio53", "gpio56";
 					function = "blsp_uart10";
@@ -1406,7 +1416,19 @@ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
 				bias-pull-up;
 			};
 
-			/* BLSP2_I2C6 info is missing - nobody uses it though? */
+			blsp2_i2c6_default: blsp2-i2c6-default {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
 
 			spi8_default: spi8_default {
 				mosi {

arch/arm/boot/dts/sama5d2.dtsi

@@ -1124,7 +1124,7 @@ AT91_XDMAC_DT_PERID(33))>,
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts

@@ -169,7 +169,7 @@ &spi0 {
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};

arch/arm/include/asm/dma.h

@@ -10,7 +10,7 @@
 #else
 #define MAX_DMA_ADDRESS	({ \
 	extern phys_addr_t arm_dma_zone_size; \
-	arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 

arch/arm/include/asm/domain.h

@@ -112,19 +112,6 @@ static __always_inline void set_domain(unsigned int val)
 }
 #endif
 
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define modify_domain(dom,type)					\
-	do {							\
-		unsigned int domain = get_domain();		\
-		domain &= ~domain_mask(dom);			\
-		domain = domain | domain_val(dom, type);	\
-		set_domain(domain);				\
-	} while (0)
-
-#else
-static inline void modify_domain(unsigned dom, unsigned type)	{ }
-#endif
-
 /*
  * Generate the T (user) versions of the LDR/STR and related
  * instructions (inline assembly)

arch/arm/include/asm/mach/map.h

@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,

arch/arm/include/asm/ptrace.h

@@ -163,5 +163,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif

arch/arm/kernel/entry-common.S

@@ -302,6 +302,7 @@ local_restart:
 	b	ret_fast_syscall
 #endif
 ENDPROC(vector_swi)
+	.ltorg
 
 	/*
 	 * This is the really slow path.  We're going to be doing

arch/arm/lib/findbit.S

@@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_zero_bit_le)
-		teq	r1, #0
+		cmp	r2, r1
-		beq	3b
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_bit_le)
-		teq	r1, #0
+		cmp	r2, r1
-		beq	3b
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be)
 ENDPROC(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
+		cmp	r2, r1
-		beq	3b
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
@@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be)
 ENDPROC(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
-		teq	r1, #0
+		cmp	r2, r1
-		beq	3b
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering

arch/arm/mach-pxa/corgi.c

@@ -549,7 +549,7 @@ static struct pxa2xx_spi_controller corgi_spi_info = {
 };
 
 static struct gpiod_lookup_table corgi_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.1",
+	.dev_id = "spi1",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),

arch/arm/mach-pxa/hx4700.c

@@ -635,7 +635,7 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 };
 
 static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "pxa2xx-spi.2",
+	.dev_id = "spi2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		{ },

arch/arm/mach-pxa/icontrol.c

@@ -140,7 +140,7 @@ struct platform_device pxa_spi_ssp4 = {
 };
 
 static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
-	.dev_id = "pxa2xx-spi.3",
+	.dev_id = "spi3",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
@@ -149,7 +149,7 @@ static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
 };
 
 static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
-	.dev_id = "pxa2xx-spi.4",
+	.dev_id = "spi4",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),

arch/arm/mach-pxa/littleton.c

@@ -207,7 +207,7 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 };
 
 static struct gpiod_lookup_table littleton_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.2",
+	.dev_id = "spi2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		{ },

arch/arm/mach-pxa/magician.c

@@ -994,7 +994,7 @@ static struct pxa2xx_spi_controller magician_spi_info = {
 };
 
 static struct gpiod_lookup_table magician_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.2",
+	.dev_id = "spi2",
 	.table = {
 		/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
 		GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),

arch/arm/mach-pxa/spitz.c

@@ -578,7 +578,7 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 };
 
 static struct gpiod_lookup_table spitz_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.2",
+	.dev_id = "spi2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),

arch/arm/mach-pxa/z2.c

@@ -623,7 +623,7 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 };
 
 static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
-	.dev_id = "pxa2xx-spi.1",
+	.dev_id = "spi1",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		{ },
@@ -631,7 +631,7 @@ static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
 };
 
 static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "pxa2xx-spi.2",
+	.dev_id = "spi2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
 		{ },

arch/arm/mach-rockchip/pm.c

@@ -311,7 +311,7 @@ void __init rockchip_suspend_init(void)
 					     &match);
 	if (!match) {
 		pr_err("Failed to find PMU node\n");
-		return;
+		goto out_put;
 	}
 	pm_data = (struct rockchip_pm_data *) match->data;
 
@@ -320,9 +320,12 @@ void __init rockchip_suspend_init(void)
 
 		if (ret) {
 			pr_err("%s: matches init error %d\n", __func__, ret);
-			return;
+			goto out_put;
 		}
 	}
 
 	suspend_set_ops(pm_data->ops);
+
+out_put:
+	of_node_put(np);
 }

arch/arm/mm/Kconfig

@@ -631,7 +631,11 @@ config CPU_USE_DOMAINS
 	bool
 	help
 	  This option enables or disables the use of domain switching
-	  via the set_fs() function.
+	  using the DACR (domain access control register) to protect memory
+	  domains from each other. In Linux we use three domains: kernel, user
+	  and IO. The domains are used to protect userspace from kernelspace
+	  and to handle IO-space as a special type of memory by assigning
+	  manager or client roles to running code (such as a process).
 
 config CPU_V7M_NUM_IRQ
 	int "Number of external interrupts connected to the NVIC"

arch/arm/mm/alignment.c

@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:

arch/arm/mm/mmu.c

@@ -296,6 +296,13 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT,
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -489,6 +496,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -568,6 +576,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -587,6 +596,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -647,6 +658,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1360,7 +1373,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
 		map.virtual = FDT_FIXED_BASE;
 		map.length = FDT_FIXED_SIZE;
-		map.type = MT_ROM;
+		map.type = MT_MEMORY_RO;
 		create_mapping(&map);
 	}
 

arch/arm/mm/proc-v7-bugs.c

@@ -108,8 +108,7 @@ static unsigned int spectre_v2_install_workaround(unsigned int method)
 #else
 static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
-	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
-		smp_processor_id());
 
 	return SPECTRE_VULNERABLE;
 }
@@ -209,10 +208,10 @@ static int spectre_bhb_install_workaround(int method)
 			return SPECTRE_VULNERABLE;
 
 		spectre_bhb_method = method;
-	}
 
-	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
 			smp_processor_id(), spectre_bhb_method_name(method));
+	}
 
 	return SPECTRE_MITIGATED;
 }

arch/arm/probes/decode.h

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;

arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi

@@ -9,6 +9,14 @@ cpus {
 		/delete-node/ cpu@3;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi

@@ -29,6 +29,8 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "brcm,brahma-b53";
 			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
 			next-level-cache = <&l2>;
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -224,9 +224,12 @@ rst: syscon@1e60000 {
 			little-endian;
 		};
 
-		efuse@1e80000 {
+		sfp: efuse@1e80000 {
 			compatible = "fsl,ls1028a-sfp";
 			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
 			#address-cells = <1>;
 			#size-cells = <1>;
 

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

@@ -376,7 +376,8 @@ &cru {
 		<&cru ACLK_VIO>,
 		<&cru ACLK_GIC_PRE>,
 		<&cru PCLK_DDR>,
-		<&cru ACLK_HDCP>;
+		<&cru ACLK_HDCP>,
+		<&cru ACLK_VDU>;
 	assigned-clock-rates =
 		<600000000>, <1600000000>,
 		<1000000000>,
@@ -388,6 +389,7 @@ &cru {
 		<400000000>,
 		<200000000>,
 		<200000000>,
+		<400000000>,
 		<400000000>;
 };
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1462,7 +1462,8 @@ cru: clock-controller@ff760000 {
 			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
 			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
 			<&cru ACLK_GIC_PRE>,
-			<&cru PCLK_DDR>;
+			<&cru PCLK_DDR>,
+			<&cru ACLK_VDU>;
 		assigned-clock-rates =
 			 <594000000>,  <800000000>,
 			<1000000000>,
@@ -1473,7 +1474,8 @@ cru: clock-controller@ff760000 {
 			 <100000000>,   <50000000>,
 			 <400000000>, <400000000>,
 			 <200000000>,
-			 <200000000>;
+			 <200000000>,
+			 <400000000>;
 	};
 
 	grf: syscon@ff770000 {

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts

@@ -687,6 +687,7 @@ &usb_host1_ohci {
 };
 
 &usb_host0_xhci {
+	dr_mode = "host";
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -133,7 +133,7 @@ &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim

arch/arm64/configs/gki_defconfig

@@ -389,9 +389,13 @@ CONFIG_SPMI=y
 # CONFIG_PINCTRL_SUN8I_H3_R is not set
 # CONFIG_PINCTRL_SUN50I_A64 is not set
 # CONFIG_PINCTRL_SUN50I_A64_R is not set
+# CONFIG_PINCTRL_SUN50I_A100 is not set
+# CONFIG_PINCTRL_SUN50I_A100_R is not set
 # CONFIG_PINCTRL_SUN50I_H5 is not set
 # CONFIG_PINCTRL_SUN50I_H6 is not set
 # CONFIG_PINCTRL_SUN50I_H6_R is not set
+# CONFIG_PINCTRL_SUN50I_H616 is not set
+# CONFIG_PINCTRL_SUN50I_H616_R is not set
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_POWER_RESET_HISI=y
 CONFIG_POWER_RESET_SYSCON=y

arch/csky/include/asm/tlb.h

@@ -4,21 +4,6 @@
 #define __ASM_CSKY_TLB_H
 
 #include <asm/cacheflush.h>
-
-#define tlb_start_vma(tlb, vma) \
-	do { \
-		if (!(tlb)->fullmm) \
-			flush_cache_range(vma, (vma)->vm_start, (vma)->vm_end); \
-	}  while (0)
-
-#define tlb_end_vma(tlb, vma) \
-	do { \
-		if (!(tlb)->fullmm) \
-			flush_tlb_range(vma, (vma)->vm_start, (vma)->vm_end); \
-	}  while (0)
-
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
 #include <asm-generic/tlb.h>
 
 #endif /* __ASM_CSKY_TLB_H */

arch/loongarch/Kconfig

@@ -69,7 +69,6 @@ config LOONGARCH
 	select GENERIC_TIME_VSYSCALL
 	select GPIOLIB
 	select HAVE_ARCH_AUDITSYSCALL
-	select HAVE_ARCH_COMPILER_H
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
@@ -108,6 +107,7 @@ config LOONGARCH
 	select TRACE_IRQFLAGS_SUPPORT
 	select USE_PERCPU_NUMA_NODE_ID
 	select ZONE_DMA32
+	select MMU_GATHER_MERGE_VMAS if MMU
 
 config 32BIT
 	bool

arch/loongarch/include/asm/asmmacro.h

@@ -274,16 +274,4 @@
 	nor	\dst, \src, zero
 .endm
 
-.macro bgt r0 r1 label
-	blt	\r1, \r0, \label
-.endm
-
-.macro bltz r0 label
-	blt	\r0, zero, \label
-.endm
-
-.macro bgez r0 label
-	bge	\r0, zero, \label
-.endm
-
 #endif /* _ASM_ASMMACRO_H */

arch/loongarch/include/asm/atomic.h

@@ -10,7 +10,6 @@
 #include <linux/types.h>
 #include <asm/barrier.h>
 #include <asm/cmpxchg.h>
-#include <asm/compiler.h>
 
 #if __SIZEOF_LONG__ == 4
 #define __LL		"ll.w	"
@@ -157,27 +156,25 @@ static inline int arch_atomic_sub_if_positive(int i, atomic_t *v)
 		__asm__ __volatile__(
 		"1:	ll.w	%1, %2		# atomic_sub_if_positive\n"
 		"	addi.w	%0, %1, %3				\n"
-		"	or	%1, %0, $zero				\n"
+		"	move	%1, %0					\n"
-		"	blt	%0, $zero, 2f				\n"
+		"	bltz	%0, 2f					\n"
 		"	sc.w	%1, %2					\n"
-		"	beq	$zero, %1, 1b				\n"
+		"	beqz	%1, 1b					\n"
 		"2:							\n"
 		__WEAK_LLSC_MB
-		: "=&r" (result), "=&r" (temp),
+		: "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
-		  "+" GCC_OFF_SMALL_ASM() (v->counter)
 		: "I" (-i));
 	} else {
 		__asm__ __volatile__(
 		"1:	ll.w	%1, %2		# atomic_sub_if_positive\n"
 		"	sub.w	%0, %1, %3				\n"
-		"	or	%1, %0, $zero				\n"
+		"	move	%1, %0					\n"
-		"	blt	%0, $zero, 2f				\n"
+		"	bltz	%0, 2f					\n"
 		"	sc.w	%1, %2					\n"
-		"	beq	$zero, %1, 1b				\n"
+		"	beqz	%1, 1b					\n"
 		"2:							\n"
 		__WEAK_LLSC_MB
-		: "=&r" (result), "=&r" (temp),
+		: "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
-		  "+" GCC_OFF_SMALL_ASM() (v->counter)
 		: "r" (i));
 	}
 
@@ -320,27 +317,25 @@ static inline long arch_atomic64_sub_if_positive(long i, atomic64_t *v)
 		__asm__ __volatile__(
 		"1:	ll.d	%1, %2	# atomic64_sub_if_positive	\n"
 		"	addi.d	%0, %1, %3				\n"
-		"	or	%1, %0, $zero				\n"
+		"	move	%1, %0					\n"
-		"	blt	%0, $zero, 2f				\n"
+		"	bltz	%0, 2f					\n"
 		"	sc.d	%1, %2					\n"
-		"	beq	%1, $zero, 1b				\n"
+		"	beqz	%1, 1b					\n"
 		"2:							\n"
 		__WEAK_LLSC_MB
-		: "=&r" (result), "=&r" (temp),
+		: "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
-		  "+" GCC_OFF_SMALL_ASM() (v->counter)
 		: "I" (-i));
 	} else {
 		__asm__ __volatile__(
 		"1:	ll.d	%1, %2	# atomic64_sub_if_positive	\n"
 		"	sub.d	%0, %1, %3				\n"
-		"	or	%1, %0, $zero				\n"
+		"	move	%1, %0					\n"
-		"	blt	%0, $zero, 2f				\n"
+		"	bltz	%0, 2f					\n"
 		"	sc.d	%1, %2					\n"
-		"	beq	%1, $zero, 1b				\n"
+		"	beqz	%1, 1b					\n"
 		"2:							\n"
 		__WEAK_LLSC_MB
-		: "=&r" (result), "=&r" (temp),
+		: "=&r" (result), "=&r" (temp), "+ZC" (v->counter)
-		  "+" GCC_OFF_SMALL_ASM() (v->counter)
 		: "r" (i));
 	}
 

arch/loongarch/include/asm/barrier.h

@@ -48,9 +48,9 @@ static inline unsigned long array_index_mask_nospec(unsigned long index,
 	__asm__ __volatile__(
 		"sltu	%0, %1, %2\n\t"
 #if (__SIZEOF_LONG__ == 4)
-		"sub.w	%0, $r0, %0\n\t"
+		"sub.w	%0, $zero, %0\n\t"
 #elif (__SIZEOF_LONG__ == 8)
-		"sub.d	%0, $r0, %0\n\t"
+		"sub.d	%0, $zero, %0\n\t"
 #endif
 		: "=r" (mask)
 		: "r" (index), "r" (size)

arch/loongarch/include/asm/cmpxchg.h

@@ -55,9 +55,9 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
 	__asm__ __volatile__(						\
 	"1:	" ld "	%0, %2		# __cmpxchg_asm \n"		\
 	"	bne	%0, %z3, 2f			\n"		\
-	"	or	$t0, %z4, $zero			\n"		\
+	"	move	$t0, %z4			\n"		\
 	"	" st "	$t0, %1				\n"		\
-	"	beq	$zero, $t0, 1b			\n"		\
+	"	beqz	$t0, 1b				\n"		\
 	"2:						\n"		\
 	__WEAK_LLSC_MB							\
 	: "=&r" (__ret), "=ZB"(*m)					\

arch/loongarch/include/asm/compiler.h

@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
- */
-#ifndef _ASM_COMPILER_H
-#define _ASM_COMPILER_H
-
-#define GCC_OFF_SMALL_ASM() "ZC"
-
-#define LOONGARCH_ISA_LEVEL "loongarch"
-#define LOONGARCH_ISA_ARCH_LEVEL "arch=loongarch"
-#define LOONGARCH_ISA_LEVEL_RAW loongarch
-#define LOONGARCH_ISA_ARCH_LEVEL_RAW LOONGARCH_ISA_LEVEL_RAW
-
-#endif /* _ASM_COMPILER_H */

arch/loongarch/include/asm/elf.h

@@ -288,8 +288,6 @@ struct arch_elf_state {
 	.interp_fp_abi = LOONGARCH_ABI_FP_ANY,	\
 }
 
-#define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT)
-
 extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 			    bool is_interp, struct arch_elf_state *state);
 

arch/loongarch/include/asm/futex.h

@@ -8,7 +8,6 @@
 #include <linux/futex.h>
 #include <linux/uaccess.h>
 #include <asm/barrier.h>
-#include <asm/compiler.h>
 #include <asm/errno.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)		\
@@ -17,7 +16,7 @@
 	"1:	ll.w	%1, %4 # __futex_atomic_op\n"		\
 	"	" insn	"				\n"	\
 	"2:	sc.w	$t0, %2				\n"	\
-	"	beq	$t0, $zero, 1b			\n"	\
+	"	beqz	$t0, 1b				\n"	\
 	"3:						\n"	\
 	"	.section .fixup,\"ax\"			\n"	\
 	"4:	li.w	%0, %6				\n"	\
@@ -82,9 +81,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newv
 	"# futex_atomic_cmpxchg_inatomic			\n"
 	"1:	ll.w	%1, %3					\n"
 	"	bne	%1, %z4, 3f				\n"
-	"	or	$t0, %z5, $zero				\n"
+	"	move	$t0, %z5				\n"
 	"2:	sc.w	$t0, %2					\n"
-	"	beq	$zero, $t0, 1b				\n"
+	"	beqz	$t0, 1b					\n"
 	"3:							\n"
 	__WEAK_LLSC_MB
 	"	.section .fixup,\"ax\"				\n"
@@ -95,8 +94,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newv
 	"	"__UA_ADDR "\t1b, 4b				\n"
 	"	"__UA_ADDR "\t2b, 4b				\n"
 	"	.previous					\n"
-	: "+r" (ret), "=&r" (val), "=" GCC_OFF_SMALL_ASM() (*uaddr)
+	: "+r" (ret), "=&r" (val), "=ZC" (*uaddr)
-	: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
+	: "ZC" (*uaddr), "Jr" (oldval), "Jr" (newval),
 	  "i" (-EFAULT)
 	: "memory", "t0");
 

arch/loongarch/include/asm/irqflags.h

@@ -9,7 +9,6 @@
 
 #include <linux/compiler.h>
 #include <linux/stringify.h>
-#include <asm/compiler.h>
 #include <asm/loongarch.h>
 
 static inline void arch_local_irq_enable(void)

arch/loongarch/include/asm/local.h

@@ -9,7 +9,6 @@
 #include <linux/bitops.h>
 #include <linux/atomic.h>
 #include <asm/cmpxchg.h>
-#include <asm/compiler.h>
 
 typedef struct {
 	atomic_long_t a;

arch/loongarch/include/asm/loongson.h

@@ -39,18 +39,6 @@ extern const struct plat_smp_ops loongson3_smp_ops;
 
 #define MAX_PACKAGES 16
 
-/* Chip Config register of each physical cpu package */
-extern u64 loongson_chipcfg[MAX_PACKAGES];
-#define LOONGSON_CHIPCFG(id) (*(volatile u32 *)(loongson_chipcfg[id]))
-
-/* Chip Temperature register of each physical cpu package */
-extern u64 loongson_chiptemp[MAX_PACKAGES];
-#define LOONGSON_CHIPTEMP(id) (*(volatile u32 *)(loongson_chiptemp[id]))
-
-/* Freq Control register of each physical cpu package */
-extern u64 loongson_freqctrl[MAX_PACKAGES];
-#define LOONGSON_FREQCTRL(id) (*(volatile u32 *)(loongson_freqctrl[id]))
-
 #define xconf_readl(addr) readl(addr)
 #define xconf_readq(addr) readq(addr)
 
@@ -58,7 +46,7 @@ static inline void xconf_writel(u32 val, volatile void __iomem *addr)
 {
 	asm volatile (
 	"	st.w	%[v], %[hw], 0	\n"
-	"	ld.b	$r0, %[hw], 0	\n"
+	"	ld.b	$zero, %[hw], 0	\n"
 	:
 	: [hw] "r" (addr), [v] "r" (val)
 	);
@@ -68,7 +56,7 @@ static inline void xconf_writeq(u64 val64, volatile void __iomem *addr)
 {
 	asm volatile (
 	"	st.d	%[v], %[hw], 0	\n"
-	"	ld.b	$r0, %[hw], 0	\n"
+	"	ld.b	$zero, %[hw], 0	\n"
 	:
 	: [hw] "r" (addr),  [v] "r" (val64)
 	);

arch/loongarch/include/asm/stacktrace.h

@@ -23,13 +23,13 @@
 static __always_inline void prepare_frametrace(struct pt_regs *regs)
 {
 	__asm__ __volatile__(
-		/* Save $r1 */
+		/* Save $ra */
 		STORE_ONE_REG(1)
-		/* Use $r1 to save PC */
+		/* Use $ra to save PC */
-		"pcaddi	$r1, 0\n\t"
+		"pcaddi	$ra, 0\n\t"
-		STR_LONG_S " $r1, %0\n\t"
+		STR_LONG_S " $ra, %0\n\t"
-		/* Restore $r1 */
+		/* Restore $ra */
-		STR_LONG_L " $r1, %1, "STR_LONGSIZE"\n\t"
+		STR_LONG_L " $ra, %1, "STR_LONGSIZE"\n\t"
 		STORE_ONE_REG(2)
 		STORE_ONE_REG(3)
 		STORE_ONE_REG(4)

arch/loongarch/include/asm/thread_info.h

@@ -44,14 +44,14 @@ struct thread_info {
 }
 
 /* How to get the thread information struct from C. */
-register struct thread_info *__current_thread_info __asm__("$r2");
+register struct thread_info *__current_thread_info __asm__("$tp");
 
 static inline struct thread_info *current_thread_info(void)
 {
 	return __current_thread_info;
 }
 
-register unsigned long current_stack_pointer __asm__("$r3");
+register unsigned long current_stack_pointer __asm__("$sp");
 
 #endif /* !__ASSEMBLY__ */
 

arch/loongarch/include/asm/tlb.h

@@ -137,16 +137,6 @@ static inline void invtlb_all(u32 op, u32 info, u64 addr)
 		);
 }
 
-/*
- * LoongArch doesn't need any special per-pte or per-vma handling, except
- * we need to flush cache for area to be unmapped.
- */
-#define tlb_start_vma(tlb, vma)					\
-	do {							\
-		if (!(tlb)->fullmm)				\
-			flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-	}  while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
 #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
 
 static void tlb_flush(struct mmu_gather *tlb);

arch/loongarch/include/asm/uaccess.h

@@ -162,7 +162,7 @@ do {									\
 	"2:							\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
 	"3:	li.w	%0, %3					\n"	\
-	"	or	%1, $r0, $r0				\n"	\
+	"	move	%1, $zero				\n"	\
 	"	b	2b					\n"	\
 	"	.previous					\n"	\
 	"	.section __ex_table,\"a\"			\n"	\

arch/loongarch/kernel/cacheinfo.c

@@ -4,8 +4,9 @@
  *
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
-#include <asm/cpu-info.h>
 #include <linux/cacheinfo.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu-info.h>
 
 /* Populates leaf and increments to next leaf */
 #define populate_cache(cache, leaf, c_level, c_type)		\
@@ -17,6 +18,8 @@ do {								\
 	leaf->ways_of_associativity = c->cache.ways;		\
 	leaf->size = c->cache.linesz * c->cache.sets *		\
 		c->cache.ways;					\
+	if (leaf->level > 2)					\
+		leaf->size *= nodes_per_package;		\
 	leaf++;							\
 } while (0)
 
@@ -95,11 +98,15 @@ static void cache_cpumap_setup(unsigned int cpu)
 
 int populate_cache_leaves(unsigned int cpu)
 {
-	int level = 1;
+	int level = 1, nodes_per_package = 1;
 	struct cpuinfo_loongarch *c = &current_cpu_data;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
 
+	if (loongson_sysconf.nr_nodes > 1)
+		nodes_per_package = loongson_sysconf.cores_per_package
+					/ loongson_sysconf.cores_per_node;
+
 	if (c->icache.waysize) {
 		populate_cache(dcache, this_leaf, level, CACHE_TYPE_DATA);
 		populate_cache(icache, this_leaf, level++, CACHE_TYPE_INST);

arch/loongarch/kernel/env.c

@@ -17,21 +17,6 @@ u64 efi_system_table;
 struct loongson_system_configuration loongson_sysconf;
 EXPORT_SYMBOL(loongson_sysconf);
 
-u64 loongson_chipcfg[MAX_PACKAGES];
-u64 loongson_chiptemp[MAX_PACKAGES];
-u64 loongson_freqctrl[MAX_PACKAGES];
-unsigned long long smp_group[MAX_PACKAGES];
-
-static void __init register_addrs_set(u64 *registers, const u64 addr, int num)
-{
-	u64 i;
-
-	for (i = 0; i < num; i++) {
-		*registers = (i << 44) | addr;
-		registers++;
-	}
-}
-
 void __init init_environ(void)
 {
 	int efi_boot = fw_arg0;
@@ -50,11 +35,6 @@ void __init init_environ(void)
 	efi_memmap_init_early(&data);
 	memblock_reserve(data.phys_map & PAGE_MASK,
 			 PAGE_ALIGN(data.size + (data.phys_map & ~PAGE_MASK)));
-
-	register_addrs_set(smp_group, TO_UNCACHE(0x1fe01000), 16);
-	register_addrs_set(loongson_chipcfg, TO_UNCACHE(0x1fe00180), 16);
-	register_addrs_set(loongson_chiptemp, TO_UNCACHE(0x1fe0019c), 16);
-	register_addrs_set(loongson_freqctrl, TO_UNCACHE(0x1fe001d0), 16);
 }
 
 static int __init init_cpu_fullname(void)

arch/loongarch/kernel/fpu.S

@@ -153,7 +153,7 @@ SYM_FUNC_START(_save_fp)
 	fpu_save_csr	a0 t1
 	fpu_save_double	a0 t1			# clobbers t1
 	fpu_save_cc	a0 t1 t2		# clobbers t1, t2
-	jirl zero, ra, 0
+	jr		ra
 SYM_FUNC_END(_save_fp)
 EXPORT_SYMBOL(_save_fp)
 
@@ -164,7 +164,7 @@ SYM_FUNC_START(_restore_fp)
 	fpu_restore_double	a0 t1		# clobbers t1
 	fpu_restore_csr		a0 t1
 	fpu_restore_cc		a0 t1 t2	# clobbers t1, t2
-	jirl zero, ra, 0
+	jr			ra
 SYM_FUNC_END(_restore_fp)
 
 /*
@@ -216,7 +216,7 @@ SYM_FUNC_START(_init_fpu)
 	movgr2fr.d	$f30, t1
 	movgr2fr.d	$f31, t1
 
-	jirl zero, ra, 0
+	jr	ra
 SYM_FUNC_END(_init_fpu)
 
 /*
@@ -229,7 +229,7 @@ SYM_FUNC_START(_save_fp_context)
 	sc_save_fcsr	a2 t1
 	sc_save_fp	a0
 	li.w		a0, 0				# success
-	jirl zero, ra, 0
+	jr		ra
 SYM_FUNC_END(_save_fp_context)
 
 /*
@@ -242,10 +242,10 @@ SYM_FUNC_START(_restore_fp_context)
 	sc_restore_fcc	a1 t1 t2
 	sc_restore_fcsr	a2 t1
 	li.w		a0, 0				# success
-	jirl zero, ra, 0
+	jr		ra
 SYM_FUNC_END(_restore_fp_context)
 
 SYM_FUNC_START(fault)
 	li.w	a0, -EFAULT				# failure
-	jirl zero, ra, 0
+	jr	ra
 SYM_FUNC_END(fault)

arch/loongarch/kernel/genex.S

@@ -28,7 +28,7 @@ SYM_FUNC_START(__arch_cpu_idle)
 	nop
 	idle	0
 	/* end of rollback region */
-1:	jirl	zero, ra, 0
+1:	jr	ra
 SYM_FUNC_END(__arch_cpu_idle)
 
 SYM_FUNC_START(handle_vint)
@@ -91,5 +91,5 @@ SYM_FUNC_END(except_vec_cex)
 
 SYM_FUNC_START(handle_sys)
 	la.abs	t0, handle_syscall
-	jirl    zero, t0, 0
+	jr	t0
 SYM_FUNC_END(handle_sys)

arch/loongarch/kernel/head.S

@@ -32,7 +32,7 @@ SYM_CODE_START(kernel_entry)			# kernel entry point
 	/* We might not get launched at the address the kernel is linked to,
 	   so we jump there.  */
 	la.abs		t0, 0f
-	jirl		zero, t0, 0
+	jr		t0
 0:
 	la		t0, __bss_start		# clear .bss
 	st.d		zero, t0, 0
@@ -50,7 +50,7 @@ SYM_CODE_START(kernel_entry)			# kernel entry point
 	/* KSave3 used for percpu base, initialized as 0 */
 	csrwr		zero, PERCPU_BASE_KS
 	/* GPR21 used for percpu base (runtime), initialized as 0 */
-	or		u0, zero, zero
+	move		u0, zero
 
 	la		tp, init_thread_union
 	/* Set the SP after an empty pt_regs.  */
@@ -86,7 +86,7 @@ SYM_CODE_START(smpboot_entry)
 	ld.d		tp, t0, CPU_BOOT_TINFO
 
 	la.abs		t0, 0f
-	jirl	zero, t0, 0
+	jr		t0
 0:
 	bl		start_secondary
 SYM_CODE_END(smpboot_entry)

arch/loongarch/kernel/ptrace.c

@@ -193,7 +193,7 @@ static int fpr_set(struct task_struct *target,
 		   const void *kbuf, const void __user *ubuf)
 {
 	const int fcc_start = NUM_FPU_REGS * sizeof(elf_fpreg_t);
-	const int fcc_end = fcc_start + sizeof(u64);
+	const int fcsr_start = fcc_start + sizeof(u64);
 	int err;
 
 	BUG_ON(count % sizeof(elf_fpreg_t));
@@ -209,10 +209,12 @@ static int fpr_set(struct task_struct *target,
 	if (err)
 		return err;
 
-	if (count > 0)
 	err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.fpu.fcc,
+				  &target->thread.fpu.fcc, fcc_start,
-					  fcc_start, fcc_end);
+				  fcc_start + sizeof(u64));
+	err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fpu.fcsr, fcsr_start,
+				  fcsr_start + sizeof(u32));
 
 	return err;
 }

arch/loongarch/kernel/reset.c

@@ -13,7 +13,6 @@
 #include <linux/console.h>
 
 #include <acpi/reboot.h>
-#include <asm/compiler.h>
 #include <asm/idle.h>
 #include <asm/loongarch.h>
 #include <asm/reboot.h>

arch/loongarch/kernel/setup.c

@@ -126,7 +126,7 @@ static void __init parse_bios_table(const struct dmi_header *dm)
 	char *dmi_data = (char *)dm;
 
 	bios_extern = *(dmi_data + SMBIOS_BIOSEXTERN_OFFSET);
-	b_info.bios_size = *(dmi_data + SMBIOS_BIOSSIZE_OFFSET);
+	b_info.bios_size = (*(dmi_data + SMBIOS_BIOSSIZE_OFFSET) + 1) << 6;
 
 	if (bios_extern & LOONGSON_EFI_ENABLE)
 		set_bit(EFI_BOOT, &efi.flags);

arch/loongarch/kernel/smp.c

@@ -278,116 +278,29 @@ void loongson3_cpu_die(unsigned int cpu)
 	mb();
 }
 
-/*
+void play_dead(void)
- * The target CPU should go to XKPRANGE (uncached area) and flush
- * ICache/DCache/VCache before the control CPU can safely disable its clock.
- */
-static void loongson3_play_dead(int *state_addr)
 {
-	register int val;
+	register uint64_t addr;
-	register void *addr;
 	register void (*init_fn)(void);
 
-	__asm__ __volatile__(
+	idle_task_exit();
-		"   li.d %[addr], 0x8000000000000000\n"
-		"1: cacop 0x8, %[addr], 0           \n" /* flush ICache */
-		"   cacop 0x8, %[addr], 1           \n"
-		"   cacop 0x8, %[addr], 2           \n"
-		"   cacop 0x8, %[addr], 3           \n"
-		"   cacop 0x9, %[addr], 0           \n" /* flush DCache */
-		"   cacop 0x9, %[addr], 1           \n"
-		"   cacop 0x9, %[addr], 2           \n"
-		"   cacop 0x9, %[addr], 3           \n"
-		"   addi.w %[sets], %[sets], -1     \n"
-		"   addi.d %[addr], %[addr], 0x40   \n"
-		"   bnez %[sets], 1b                \n"
-		"   li.d %[addr], 0x8000000000000000\n"
-		"2: cacop 0xa, %[addr], 0           \n" /* flush VCache */
-		"   cacop 0xa, %[addr], 1           \n"
-		"   cacop 0xa, %[addr], 2           \n"
-		"   cacop 0xa, %[addr], 3           \n"
-		"   cacop 0xa, %[addr], 4           \n"
-		"   cacop 0xa, %[addr], 5           \n"
-		"   cacop 0xa, %[addr], 6           \n"
-		"   cacop 0xa, %[addr], 7           \n"
-		"   cacop 0xa, %[addr], 8           \n"
-		"   cacop 0xa, %[addr], 9           \n"
-		"   cacop 0xa, %[addr], 10          \n"
-		"   cacop 0xa, %[addr], 11          \n"
-		"   cacop 0xa, %[addr], 12          \n"
-		"   cacop 0xa, %[addr], 13          \n"
-		"   cacop 0xa, %[addr], 14          \n"
-		"   cacop 0xa, %[addr], 15          \n"
-		"   addi.w %[vsets], %[vsets], -1   \n"
-		"   addi.d %[addr], %[addr], 0x40   \n"
-		"   bnez   %[vsets], 2b             \n"
-		"   li.w   %[val], 0x7              \n" /* *state_addr = CPU_DEAD; */
-		"   st.w   %[val], %[state_addr], 0 \n"
-		"   dbar 0                          \n"
-		"   cacop 0x11, %[state_addr], 0    \n" /* flush entry of *state_addr */
-		: [addr] "=&r" (addr), [val] "=&r" (val)
-		: [state_addr] "r" (state_addr),
-		  [sets] "r" (cpu_data[smp_processor_id()].dcache.sets),
-		  [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets));
-
 	local_irq_enable();
-	change_csr_ecfg(ECFG0_IM, ECFGF_IPI);
+	set_csr_ecfg(ECFGF_IPI);
+	__this_cpu_write(cpu_state, CPU_DEAD);
 
-	__asm__ __volatile__(
+	__smp_mb();
-		"   idle      0			    \n"
+	do {
-		"   li.w      $t0, 0x1020	    \n"
+		__asm__ __volatile__("idle 0\n\t");
-		"   iocsrrd.d %[init_fn], $t0	    \n" /* Get init PC */
+		addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
-		: [init_fn] "=&r" (addr)
+	} while (addr == 0);
-		: /* No Input */
+
-		: "a0");
+	init_fn = (void *)TO_CACHE(addr);
-	init_fn = __va(addr);
+	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
 
 	init_fn();
 	unreachable();
 }
 
-void play_dead(void)
-{
-	int *state_addr;
-	unsigned int cpu = smp_processor_id();
-	void (*play_dead_uncached)(int *s);
-
-	idle_task_exit();
-	play_dead_uncached = (void *)TO_UNCACHE(__pa((unsigned long)loongson3_play_dead));
-	state_addr = &per_cpu(cpu_state, cpu);
-	mb();
-	play_dead_uncached(state_addr);
-}
-
-static int loongson3_enable_clock(unsigned int cpu)
-{
-	uint64_t core_id = cpu_data[cpu].core;
-	uint64_t package_id = cpu_data[cpu].package;
-
-	LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
-
-	return 0;
-}
-
-static int loongson3_disable_clock(unsigned int cpu)
-{
-	uint64_t core_id = cpu_data[cpu].core;
-	uint64_t package_id = cpu_data[cpu].package;
-
-	LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
-
-	return 0;
-}
-
-static int register_loongson3_notifier(void)
-{
-	return cpuhp_setup_state_nocalls(CPUHP_LOONGARCH_SOC_PREPARE,
-					 "loongarch/loongson:prepare",
-					 loongson3_enable_clock,
-					 loongson3_disable_clock);
-}
-early_initcall(register_loongson3_notifier);
-
 #endif
 
 /*

arch/loongarch/lib/clear_user.S

@@ -32,7 +32,7 @@ SYM_FUNC_START(__clear_user)
 1:	st.b	zero, a0, 0
 	addi.d	a0, a0, 1
 	addi.d	a1, a1, -1
-	bgt	a1, zero, 1b
+	bgtz	a1, 1b
 
 2:	move	a0, a1
 	jr	ra

arch/loongarch/lib/copy_user.S

@@ -35,7 +35,7 @@ SYM_FUNC_START(__copy_user)
 	addi.d	a0, a0, 1
 	addi.d	a1, a1, 1
 	addi.d	a2, a2, -1
-	bgt	a2, zero, 1b
+	bgtz	a2, 1b
 
 3:	move	a0, a2
 	jr	ra

arch/loongarch/lib/delay.c

@@ -7,7 +7,6 @@
 #include <linux/smp.h>
 #include <linux/timex.h>
 
-#include <asm/compiler.h>
 #include <asm/processor.h>
 
 void __delay(unsigned long cycles)

arch/loongarch/mm/page.S

@@ -32,7 +32,7 @@ SYM_FUNC_START(clear_page)
 	st.d	zero, a0, -8
 	bne	t0,   a0, 1b
 
-	jirl     $r0, ra, 0
+	jr	ra
 SYM_FUNC_END(clear_page)
 EXPORT_SYMBOL(clear_page)
 
@@ -79,6 +79,6 @@ SYM_FUNC_START(copy_page)
 	st.d	t7, a0, -8
 
 	bne	t8, a0, 1b
-	jirl     $r0, ra, 0
+	jr	ra
 SYM_FUNC_END(copy_page)
 EXPORT_SYMBOL(copy_page)

arch/loongarch/mm/tlbex.S

@@ -47,7 +47,7 @@ SYM_FUNC_START(handle_tlb_load)
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	csrrd	t0, LOONGARCH_CSR_BADV
-	blt	t0, $r0, vmalloc_load
+	bltz	t0, vmalloc_load
 	csrrd	t1, LOONGARCH_CSR_PGDL
 
 vmalloc_done_load:
@@ -80,7 +80,7 @@ vmalloc_done_load:
 	 * see if we need to jump to huge tlb processing.
 	 */
 	andi	t0, ra, _PAGE_HUGE
-	bne	t0, $r0, tlb_huge_update_load
+	bnez	t0, tlb_huge_update_load
 
 	csrrd	t0, LOONGARCH_CSR_BADV
 	srli.d	t0, t0, (PAGE_SHIFT + PTE_ORDER)
@@ -100,12 +100,12 @@ smp_pgtable_change_load:
 
 	srli.d	ra, t0, _PAGE_PRESENT_SHIFT
 	andi	ra, ra, 1
-	beq	ra, $r0, nopage_tlb_load
+	beqz	ra, nopage_tlb_load
 
 	ori	t0, t0, _PAGE_VALID
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, smp_pgtable_change_load
+	beqz	t0, smp_pgtable_change_load
 #else
 	st.d	t0, t1, 0
 #endif
@@ -139,23 +139,23 @@ tlb_huge_update_load:
 #endif
 	srli.d	ra, t0, _PAGE_PRESENT_SHIFT
 	andi	ra, ra, 1
-	beq	ra, $r0, nopage_tlb_load
+	beqz	ra, nopage_tlb_load
 	tlbsrch
 
 	ori	t0, t0, _PAGE_VALID
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, tlb_huge_update_load
+	beqz	t0, tlb_huge_update_load
 	ld.d	t0, t1, 0
 #else
 	st.d	t0, t1, 0
 #endif
-	addu16i.d	t1, $r0, -(CSR_TLBIDX_EHINV >> 16)
+	addu16i.d	t1, zero, -(CSR_TLBIDX_EHINV >> 16)
 	addi.d		ra, t1, 0
 	csrxchg		ra, t1, LOONGARCH_CSR_TLBIDX
 	tlbwr
 
-	csrxchg	$r0, t1, LOONGARCH_CSR_TLBIDX
+	csrxchg	zero, t1, LOONGARCH_CSR_TLBIDX
 
 	/*
 	 * A huge PTE describes an area the size of the
@@ -178,27 +178,27 @@ tlb_huge_update_load:
 	addi.d	t0, ra, 0
 
 	/* Convert to entrylo1 */
-	addi.d	t1, $r0, 1
+	addi.d	t1, zero, 1
 	slli.d	t1, t1, (HPAGE_SHIFT - 1)
 	add.d	t0, t0, t1
 	csrwr	t0, LOONGARCH_CSR_TLBELO1
 
 	/* Set huge page tlb entry size */
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 	tlbfill
 
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 nopage_tlb_load:
 	dbar	0
 	csrrd	ra, EXCEPTION_KS2
 	la.abs	t0, tlb_do_page_fault_0
-	jirl	$r0, t0, 0
+	jr	t0
 SYM_FUNC_END(handle_tlb_load)
 
 SYM_FUNC_START(handle_tlb_store)
@@ -210,7 +210,7 @@ SYM_FUNC_START(handle_tlb_store)
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	csrrd	t0, LOONGARCH_CSR_BADV
-	blt	t0, $r0, vmalloc_store
+	bltz	t0, vmalloc_store
 	csrrd	t1, LOONGARCH_CSR_PGDL
 
 vmalloc_done_store:
@@ -244,7 +244,7 @@ vmalloc_done_store:
 	 * see if we need to jump to huge tlb processing.
 	 */
 	andi	t0, ra, _PAGE_HUGE
-	bne	t0, $r0, tlb_huge_update_store
+	bnez	t0, tlb_huge_update_store
 
 	csrrd	t0, LOONGARCH_CSR_BADV
 	srli.d	t0, t0, (PAGE_SHIFT + PTE_ORDER)
@@ -265,12 +265,12 @@ smp_pgtable_change_store:
 	srli.d	ra, t0, _PAGE_PRESENT_SHIFT
 	andi	ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
 	xori	ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
-	bne	ra, $r0, nopage_tlb_store
+	bnez	ra, nopage_tlb_store
 
 	ori	t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, smp_pgtable_change_store
+	beqz	t0, smp_pgtable_change_store
 #else
 	st.d	t0, t1, 0
 #endif
@@ -306,24 +306,24 @@ tlb_huge_update_store:
 	srli.d	ra, t0, _PAGE_PRESENT_SHIFT
 	andi	ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
 	xori	ra, ra, ((_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT)
-	bne	ra, $r0, nopage_tlb_store
+	bnez	ra, nopage_tlb_store
 
 	tlbsrch
 	ori	t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, tlb_huge_update_store
+	beqz	t0, tlb_huge_update_store
 	ld.d	t0, t1, 0
 #else
 	st.d	t0, t1, 0
 #endif
-	addu16i.d	t1, $r0, -(CSR_TLBIDX_EHINV >> 16)
+	addu16i.d	t1, zero, -(CSR_TLBIDX_EHINV >> 16)
 	addi.d		ra, t1, 0
 	csrxchg		ra, t1, LOONGARCH_CSR_TLBIDX
 	tlbwr
 
-	csrxchg	$r0, t1, LOONGARCH_CSR_TLBIDX
+	csrxchg	zero, t1, LOONGARCH_CSR_TLBIDX
 	/*
 	 * A huge PTE describes an area the size of the
 	 * configured huge page size. This is twice the
@@ -345,28 +345,28 @@ tlb_huge_update_store:
 	addi.d	t0, ra, 0
 
 	/* Convert to entrylo1 */
-	addi.d	t1, $r0, 1
+	addi.d	t1, zero, 1
 	slli.d	t1, t1, (HPAGE_SHIFT - 1)
 	add.d	t0, t0, t1
 	csrwr	t0, LOONGARCH_CSR_TLBELO1
 
 	/* Set huge page tlb entry size */
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 	tlbfill
 
 	/* Reset default page size */
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 nopage_tlb_store:
 	dbar	0
 	csrrd	ra, EXCEPTION_KS2
 	la.abs	t0, tlb_do_page_fault_1
-	jirl	$r0, t0, 0
+	jr	t0
 SYM_FUNC_END(handle_tlb_store)
 
 SYM_FUNC_START(handle_tlb_modify)
@@ -378,7 +378,7 @@ SYM_FUNC_START(handle_tlb_modify)
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	csrrd	t0, LOONGARCH_CSR_BADV
-	blt	t0, $r0, vmalloc_modify
+	bltz	t0, vmalloc_modify
 	csrrd	t1, LOONGARCH_CSR_PGDL
 
 vmalloc_done_modify:
@@ -411,7 +411,7 @@ vmalloc_done_modify:
 	 * see if we need to jump to huge tlb processing.
 	 */
 	andi	t0, ra, _PAGE_HUGE
-	bne	t0, $r0, tlb_huge_update_modify
+	bnez	t0, tlb_huge_update_modify
 
 	csrrd	t0, LOONGARCH_CSR_BADV
 	srli.d	t0, t0, (PAGE_SHIFT + PTE_ORDER)
@@ -431,12 +431,12 @@ smp_pgtable_change_modify:
 
 	srli.d	ra, t0, _PAGE_WRITE_SHIFT
 	andi	ra, ra, 1
-	beq	ra, $r0, nopage_tlb_modify
+	beqz	ra, nopage_tlb_modify
 
 	ori	t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, smp_pgtable_change_modify
+	beqz	t0, smp_pgtable_change_modify
 #else
 	st.d	t0, t1, 0
 #endif
@@ -471,14 +471,14 @@ tlb_huge_update_modify:
 
 	srli.d	ra, t0, _PAGE_WRITE_SHIFT
 	andi	ra, ra, 1
-	beq	ra, $r0, nopage_tlb_modify
+	beqz	ra, nopage_tlb_modify
 
 	tlbsrch
 	ori	t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 
 #ifdef CONFIG_SMP
 	sc.d	t0, t1, 0
-	beq	t0, $r0, tlb_huge_update_modify
+	beqz	t0, tlb_huge_update_modify
 	ld.d	t0, t1, 0
 #else
 	st.d	t0, t1, 0
@@ -504,28 +504,28 @@ tlb_huge_update_modify:
 	addi.d	t0, ra, 0
 
 	/* Convert to entrylo1 */
-	addi.d	t1, $r0, 1
+	addi.d	t1, zero, 1
 	slli.d	t1, t1, (HPAGE_SHIFT - 1)
 	add.d	t0, t0, t1
 	csrwr	t0, LOONGARCH_CSR_TLBELO1
 
 	/* Set huge page tlb entry size */
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 	tlbwr
 
 	/* Reset default page size */
-	addu16i.d	t0, $r0, (CSR_TLBIDX_PS >> 16)
+	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
-	addu16i.d	t1, $r0, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
+	addu16i.d	t1, zero, (PS_DEFAULT_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
 nopage_tlb_modify:
 	dbar	0
 	csrrd	ra, EXCEPTION_KS2
 	la.abs	t0, tlb_do_page_fault_1
-	jirl	$r0, t0, 0
+	jr	t0
 SYM_FUNC_END(handle_tlb_modify)
 
 SYM_FUNC_START(handle_tlb_refill)

arch/powerpc/Kconfig

@@ -256,6 +256,7 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select MMU_GATHER_PAGE_SIZE
 	select MMU_GATHER_RCU_TABLE_FREE
+	select MMU_GATHER_MERGE_VMAS
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE		if PPC64 || NOT_COHERENT_CACHE
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK	if PPC64
@@ -281,6 +282,10 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 
+config PPC_LONG_DOUBLE_128
+	depends on PPC64
+	def_bool $(success,test "$(shell,echo __LONG_DOUBLE_128__ | $(CC) -E -P -)" = 1)
+
 config PPC_BARRIER_NOSPEC
 	bool
 	default y

arch/powerpc/include/asm/tlb.h

@@ -19,8 +19,6 @@
 
 #include <linux/pagemap.h>
 
-#define tlb_start_vma(tlb, vma)	do { } while (0)
-#define tlb_end_vma(tlb, vma)	do { } while (0)
 #define __tlb_remove_tlb_entry	__tlb_remove_tlb_entry
 
 #define tlb_flush tlb_flush

arch/powerpc/kernel/Makefile

@@ -20,6 +20,7 @@ CFLAGS_prom.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_prom_init.o += -fno-stack-protector
 CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING
 CFLAGS_prom_init.o += -ffreestanding
+CFLAGS_prom_init.o += $(call cc-option, -ftrivial-auto-var-init=uninitialized)
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code

arch/riscv/Makefile

@@ -73,6 +73,7 @@ ifeq ($(CONFIG_PERF_EVENTS),y)
 endif
 
 KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
+KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax)
 
 # GCC versions that support the "-mstrict-align" option default to allowing
 # unaligned accesses.  While unaligned accesses are explicitly allowed in the
@@ -110,7 +111,7 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
 	$(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
-		$(build)=arch/riscv/kernel/compat_vdso $@)
+		$(build)=arch/riscv/kernel/compat_vdso compat_$@)
 
 ifeq ($(KBUILD_EXTMOD),)
 ifeq ($(CONFIG_MMU),y)

arch/riscv/boot/dts/canaan/canaan_kd233.dts

@@ -35,7 +35,7 @@ led1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		key0 {
+		key {
 			label = "KEY0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -47,7 +47,7 @@ led2 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		boot {
+		key-boot {
 			label = "BOOT";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -52,7 +52,7 @@ led2 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		boot {
+		key-boot {
 			label = "BOOT";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -46,19 +46,19 @@ led2 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		up {
+		key-up {
 			label = "UP";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
 		};
 
-		press {
+		key-press {
 			label = "PRESS";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "DOWN";
 			linux,code = <BTN_2>;
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -23,7 +23,7 @@ chosen {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		boot {
+		key-boot {
 			label = "BOOT";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;

arch/riscv/boot/dts/microchip/mpfs.dtsi

@@ -50,6 +50,7 @@ cpu1: cpu@1 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu1_intc: interrupt-controller {
@@ -77,6 +78,7 @@ cpu2: cpu@2 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu2_intc: interrupt-controller {
@@ -104,6 +106,7 @@ cpu3: cpu@3 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu3_intc: interrupt-controller {
@@ -131,6 +134,7 @@ cpu4: cpu@4 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 			cpu4_intc: interrupt-controller {
 				#interrupt-cells = <1>;

arch/riscv/errata/sifive/errata.c

@@ -111,6 +111,7 @@ void __init_or_module sifive_errata_patch_func(struct alt_entry *begin,
 			cpu_apply_errata |= tmp;
 		}
 	}
-	if (cpu_apply_errata != cpu_req_errata)
+	if (stage != RISCV_ALTERNATIVES_MODULE &&
+	    cpu_apply_errata != cpu_req_errata)
 		warn_miss_errata(cpu_req_errata - cpu_apply_errata);
 }

arch/riscv/include/asm/pgtable-64.h

@@ -175,7 +175,7 @@ static inline pud_t pfn_pud(unsigned long pfn, pgprot_t prot)
 
 static inline unsigned long _pud_pfn(pud_t pud)
 {
-	return pud_val(pud) >> _PAGE_PFN_SHIFT;
+	return __page_val_to_pfn(pud_val(pud));
 }
 
 static inline pmd_t *pud_pgtable(pud_t pud)
@@ -278,13 +278,13 @@ static inline p4d_t pfn_p4d(unsigned long pfn, pgprot_t prot)
 
 static inline unsigned long _p4d_pfn(p4d_t p4d)
 {
-	return p4d_val(p4d) >> _PAGE_PFN_SHIFT;
+	return __page_val_to_pfn(p4d_val(p4d));
 }
 
 static inline pud_t *p4d_pgtable(p4d_t p4d)
 {
 	if (pgtable_l4_enabled)
-		return (pud_t *)pfn_to_virt(p4d_val(p4d) >> _PAGE_PFN_SHIFT);
+		return (pud_t *)pfn_to_virt(__page_val_to_pfn(p4d_val(p4d)));
 
 	return (pud_t *)pud_pgtable((pud_t) { p4d_val(p4d) });
 }
@@ -292,7 +292,7 @@ static inline pud_t *p4d_pgtable(p4d_t p4d)
 
 static inline struct page *p4d_page(p4d_t p4d)
 {
-	return pfn_to_page(p4d_val(p4d) >> _PAGE_PFN_SHIFT);
+	return pfn_to_page(__page_val_to_pfn(p4d_val(p4d)));
 }
 
 #define pud_index(addr) (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
@@ -347,7 +347,7 @@ static inline void pgd_clear(pgd_t *pgd)
 static inline p4d_t *pgd_pgtable(pgd_t pgd)
 {
 	if (pgtable_l5_enabled)
-		return (p4d_t *)pfn_to_virt(pgd_val(pgd) >> _PAGE_PFN_SHIFT);
+		return (p4d_t *)pfn_to_virt(__page_val_to_pfn(pgd_val(pgd)));
 
 	return (p4d_t *)p4d_pgtable((p4d_t) { pgd_val(pgd) });
 }
@@ -355,7 +355,7 @@ static inline p4d_t *pgd_pgtable(pgd_t pgd)
 
 static inline struct page *pgd_page(pgd_t pgd)
 {
-	return pfn_to_page(pgd_val(pgd) >> _PAGE_PFN_SHIFT);
+	return pfn_to_page(__page_val_to_pfn(pgd_val(pgd)));
 }
 #define pgd_page(pgd)	pgd_page(pgd)
 

arch/riscv/include/asm/pgtable.h

@@ -261,7 +261,7 @@ static inline pgd_t pfn_pgd(unsigned long pfn, pgprot_t prot)
 
 static inline unsigned long _pgd_pfn(pgd_t pgd)
 {
-	return pgd_val(pgd) >> _PAGE_PFN_SHIFT;
+	return __page_val_to_pfn(pgd_val(pgd));
 }
 
 static inline struct page *pmd_page(pmd_t pmd)
@@ -590,14 +590,14 @@ static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 	return __pmd(pmd_val(pmd) & ~(_PAGE_PRESENT|_PAGE_PROT_NONE));
 }
 
-#define __pmd_to_phys(pmd)  (pmd_val(pmd) >> _PAGE_PFN_SHIFT << PAGE_SHIFT)
+#define __pmd_to_phys(pmd)  (__page_val_to_pfn(pmd_val(pmd)) << PAGE_SHIFT)
 
 static inline unsigned long pmd_pfn(pmd_t pmd)
 {
 	return ((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT);
 }
 
-#define __pud_to_phys(pud)  (pud_val(pud) >> _PAGE_PFN_SHIFT << PAGE_SHIFT)
+#define __pud_to_phys(pud)  (__page_val_to_pfn(pud_val(pud)) << PAGE_SHIFT)
 
 static inline unsigned long pud_pfn(pud_t pud)
 {

arch/riscv/kernel/Makefile

@@ -78,7 +78,7 @@ obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_KEXEC)		+= kexec_relocate.o crash_save_regs.o machine_kexec.o
+obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
 obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 

arch/riscv/kernel/elf_kexec.c

@@ -349,7 +349,7 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 {
 	const char *strtab, *name, *shstrtab;
 	const Elf_Shdr *sechdrs;
-	Elf_Rela *relas;
+	Elf64_Rela *relas;
 	int i, r_type;
 
 	/* String & section header string table */

arch/riscv/kvm/mmu.c

@@ -54,7 +54,7 @@ static inline unsigned long gstage_pte_index(gpa_t addr, u32 level)
 
 static inline unsigned long gstage_pte_page_vaddr(pte_t pte)
 {
-	return (unsigned long)pfn_to_virt(pte_val(pte) >> _PAGE_PFN_SHIFT);
+	return (unsigned long)pfn_to_virt(__page_val_to_pfn(pte_val(pte)));
 }
 
 static int gstage_page_size_to_level(unsigned long page_size, u32 *out_level)

arch/riscv/kvm/vcpu.c

@@ -781,9 +781,11 @@ static void kvm_riscv_check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 	if (kvm_request_pending(vcpu)) {
 		if (kvm_check_request(KVM_REQ_SLEEP, vcpu)) {
+			kvm_vcpu_srcu_read_unlock(vcpu);
 			rcuwait_wait_event(wait,
 				(!vcpu->arch.power_off) && (!vcpu->arch.pause),
 				TASK_INTERRUPTIBLE);
+			kvm_vcpu_srcu_read_lock(vcpu);
 
 			if (vcpu->arch.power_off || vcpu->arch.pause) {
 				/*

arch/s390/Kconfig

@@ -204,6 +204,7 @@ config S390
 	select IOMMU_SUPPORT		if PCI
 	select MMU_GATHER_NO_GATHER
 	select MMU_GATHER_RCU_TABLE_FREE
+	select MMU_GATHER_MERGE_VMAS
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE	if PCI
 	select NEED_SG_DMA_LENGTH	if PCI

arch/s390/Makefile

@@ -82,7 +82,7 @@ endif
 
 ifdef CONFIG_EXPOLINE
   ifdef CONFIG_EXPOLINE_EXTERN
-    KBUILD_LDFLAGS_MODULE += arch/s390/lib/expoline.o
+    KBUILD_LDFLAGS_MODULE += arch/s390/lib/expoline/expoline.o
     CC_FLAGS_EXPOLINE := -mindirect-branch=thunk-extern
     CC_FLAGS_EXPOLINE += -mfunction-return=thunk-extern
   else
@@ -163,6 +163,12 @@ vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/s390/kernel/vdso64 include/generated/vdso64-offsets.h
 	$(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
 		$(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h)
+
+ifdef CONFIG_EXPOLINE_EXTERN
+modules_prepare: expoline_prepare
+expoline_prepare:
+	$(Q)$(MAKE) $(build)=arch/s390/lib/expoline arch/s390/lib/expoline/expoline.o
+endif
 endif
 
 # Don't use tabs in echo arguments