From 24f52ef0c4bfee3b18ca42bef47efa76abab56ab Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 6 Oct 2021 17:47:09 +0100 Subject: [PATCH 01/92] arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters SM8250 has TX and RX macros with SoundWire Controllers to attach with codecs like WCD938x. Add these nodes for sm8250 mtp audio use case. Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211006164712.16078-2-srinivas.kandagatla@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 157 +++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 6f6129b39c9c..c46c35a74601 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1831,6 +1831,101 @@ vamacro: codec@3370000 { #sound-dai-cells = <1>; }; + rxmacro: rxmacro@3200000 { + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + compatible = "qcom,sm8250-lpass-rx-macro"; + reg = <0 0x3200000 0 0x1000>; + + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@3210000 { + reg = <0 0x3210000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts = ; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>; + qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>; + qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + txmacro: txmacro@3220000 { + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + compatible = "qcom,sm8250-lpass-tx-macro"; + reg = <0 0x3220000 0 0x1000>; + + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #address-cells = <2>; + #size-cells = <2>; + #sound-dai-cells = <1>; + }; + + /* tx macro */ + swr2: soundwire-controller@3230000 { + reg = <0 0x3230000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core"; + + clocks = <&txmacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <5>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; + qcom,port-offset = <1>; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + aoncc: clock-controller@3380000 { compatible = "qcom,sm8250-lpass-aoncc"; reg = <0 0x03380000 0 0x40000>; @@ -1923,6 +2018,68 @@ data { input-enable; }; }; + + rx_swr_active: rx_swr-active-pins { + clk { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + tx_swr_active: tx_swr-active-pins { + clk { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + tx_swr_sleep: tx_swr-sleep-pins { + clk { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data1 { + pins = "gpio1"; + function = "swr_tx_data"; + drive-strength = <2>; + input-enable; + bias-bus-hold; + }; + + data2 { + pins = "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + }; }; gpu: gpu@3d00000 { From 5a263cf629a85aa831081de4b9f85926bb067c08 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 6 Oct 2021 17:47:10 +0100 Subject: [PATCH 02/92] arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node SM8250-MTP has WCD9380 codec for headset playback and capture via rx and tx macro respectively. Add node for this device to be able to use it for sound card device. Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211006164712.16078-3-srinivas.kandagatla@linaro.org --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 67 +++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 5ffbcdd387ba..7cf4fc97e825 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -6,6 +6,9 @@ /dts-v1/; #include +#include +#include +#include #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -624,8 +627,72 @@ &slpi { firmware-name = "qcom/sm8250/slpi.mbn"; }; +&soc { + wcd938x: codec { + compatible = "qcom,wcd9380-codec"; + #sound-dai-cells = <1>; + reset-gpios = <&tlmm 32 0>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-rxtx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + }; +}; + +&swr1 { + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; + + wcd938x_reset_default: wcd938x_reset_default { + mux { + pins = "gpio32"; + function = "gpio"; + }; + + config { + pins = "gpio32"; + drive-strength = <16>; + output-high; + }; + }; + + wcd938x_reset_sleep: wcd938x_reset_sleep { + mux { + pins = "gpio32"; + function = "gpio"; + }; + + config { + pins = "gpio32"; + drive-strength = <16>; + bias-disable; + output-low; + }; + }; }; &uart12 { From 6fcda0b556cce2afee8322e3e01eeb9e3993eb6a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 6 Oct 2021 17:47:11 +0100 Subject: [PATCH 03/92] arm64: dts: qcom: sm8250-mtp: Add wsa8810 audio codec node SM8250-MTP has WSA8810 via wsa macro for Speaker playback use case. Add node for this device to be able to use it for sound card device. Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211006164712.16078-4-srinivas.kandagatla@linaro.org --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7cf4fc97e825..ee8a6c36d06f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -648,6 +648,26 @@ wcd938x: codec { }; }; +&swr0 { + left_spkr: wsa8810-right@0,3{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-left@0,4{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; +}; + &swr1 { wcd_rx: wcd9380-rx@0,4 { compatible = "sdw20217010d00"; From fa244dca404c8b02999348098be7f2ae62670af0 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 6 Oct 2021 17:47:12 +0100 Subject: [PATCH 04/92] arm64: dts: qcom: sm8250-mtp: add sound card support This patch adds sound card support for MTP using WCD938x headset playback, capture, WSA8810 Speaker Playback and DMICs via VA macro. Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211006164712.16078-5-srinivas.kandagatla@linaro.org --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 104 ++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index ee8a6c36d06f..fb99cc2827c7 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -648,6 +648,110 @@ wcd938x: codec { }; }; +&sound { + compatible = "qcom,sm8250-sndcard"; + model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_ADC3", "ADC4_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>; + }; + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + &swr0 { left_spkr: wsa8810-right@0,3{ compatible = "sdw10217211000"; From 0112b06fde557d407c0d477ee7ed973e44e65c75 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 25 Oct 2021 12:22:24 +0200 Subject: [PATCH 05/92] arm64: dts: qcom: Add missing 'chassis-type's Add the "chassis-type" to msm8916-samsung-serranove and sm7225-fairphone-fp4 that were posted before the patch that added the chassis-type to existing device trees, but merged after it. Also, looks like sdm636-sony-xperia-ganges-mermaid was missing in commit eaa744b1c101 ("arm64: dts: qcom: add 'chassis-type' property") so add it there as well. Cc: Luca Weiss Cc: Arnaud Ferraris Signed-off-by: Stephan Gerhold Reviewed-by: Arnaud Ferraris Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211025102224.23746-1-stephan@gerhold.net --- arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 1 + arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts | 1 + arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index a78f87a5bf4f..58dfbfff4c7d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -23,6 +23,7 @@ / { model = "Samsung Galaxy S4 Mini Value Edition"; compatible = "samsung,serranove", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts index bba1c2bce213..b96da53f2f1e 100644 --- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia 10 Plus"; compatible = "sony,mermaid-row", "qcom,sdm636"; + chassis-type = "handset"; /* SDM636 v1 */ qcom,msm-id = <345 0>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 8d6fd22873e0..a6937642736e 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -15,6 +15,7 @@ / { model = "Fairphone 4"; compatible = "fairphone,fp4", "qcom,sm7225"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,msm-id = <434 0x10000>, <459 0x10000>; From 37613aee217928dddf62d91d3db831827f860833 Mon Sep 17 00:00:00 2001 From: Dikshita Agarwal Date: Tue, 26 Oct 2021 20:22:02 +0530 Subject: [PATCH 06/92] arm64: dts: qcom: sc7280: Add venus DT node Add DT entries for the sc7280 venus encoder/decoder. Co-developed-by: Mansur Alisha Shaik Signed-off-by: Mansur Alisha Shaik Signed-off-by: Dikshita Agarwal Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1635259922-25378-1-git-send-email-quic_dikshita@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 365a2e04e285..e4988ea2011c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -129,6 +129,11 @@ wlan_fw_mem: memory@80c00000 { no-map; }; + video_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; @@ -2675,6 +2680,76 @@ usb_1_dwc3: usb@a600000 { }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0 0x0aa00000 0 0xd0600>; + interrupts = ; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-335000000 { + opp-hz = /bits/ 64 <335000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-424000000 { + opp-hz = /bits/ 64 <424000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-460000048 { + opp-hz = /bits/ 64 <460000048>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc"; reg = <0 0xaaf0000 0 0x10000>; From 00128a57c0fe6ed90278cfec2adeccb83b7b49f4 Mon Sep 17 00:00:00 2001 From: Kate Doeen Date: Thu, 28 Oct 2021 12:19:57 +0200 Subject: [PATCH 07/92] arm64: dts: qcom: sdm845-oneplus-common: set venus firmware path Enable loading the Qualcomm Venus video accelerator firmware on OnePlus sdm845 devices. Signed-off-by: Kate Doeen Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211028101957.106034-1-jld3103yt@gmail.com --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 3e04aeb479d1..7f42e5315ecb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -646,6 +646,7 @@ mux { &venus { status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; }; &wifi { From 42dd1efffebd731e22623008058dd9c659812d1e Mon Sep 17 00:00:00 2001 From: Kate Doeen Date: Thu, 28 Oct 2021 12:20:16 +0200 Subject: [PATCH 08/92] arm64: dts: qcom: sdm845-xiaomi-beryllium: set venus firmware path Enable loading the Qualcomm Venus video accelerator firmware on Xiaomi Pocophone F1. Signed-off-by: Kate Doeen Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211028102016.106063-1-jld3103yt@gmail.com --- arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 580d4cc1296f..367389526b41 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -514,6 +514,7 @@ &usb_1_qmpphy { &venus { status = "okay"; + firmware-name = "qcom/sdm845/beryllium/venus.mbn"; }; &wcd9340{ From d201f67714a302b12ad3d78b982963342939629c Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Thu, 7 Oct 2021 13:58:46 +0200 Subject: [PATCH 09/92] arm64: dts: qcom: ipq8074: add MDIO bus IPQ8074 uses an IPQ4019 compatible MDIO controller that is already supported in the kernel, so add the DT node in order to use it. Signed-off-by: Robert Marko Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211007115846.26255-1-robimarko@gmail.com --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 6c6a0f853669..e6cc261201ef 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -230,6 +230,18 @@ pcie_phy1: phy@8e200 { }; }; + mdio: mdio@90000 { + compatible = "qcom,ipq4019-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + + status = "disabled"; + }; + prng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; From 963070f762137cff817d33c102309ab0a345eb32 Mon Sep 17 00:00:00 2001 From: Philip Chen Date: Fri, 29 Oct 2021 15:27:40 -0700 Subject: [PATCH 10/92] arm64: dts: qcom: sc7180: Include gpio.h in edp bridge dts The edp bridge dts fragment files use the macros defined in 'dt-bindings/gpio/gpio.h'. To help us more flexibly order the #include lines of dts files in a board-revision-specific dts file, let's include the gpio header in the bridge dts fragment files themselves. Signed-off-by: Philip Chen Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211029152647.v3.1.Ie17e51ad3eb91d72826ce651ca2786534a360210@changeid --- arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index a3d69540d4e4..6a84fba178d6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -5,6 +5,8 @@ * Copyright 2021 Google LLC. */ +#include + / { pp3300_brij_ps8640: pp3300-brij-ps8640 { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index 97d5e45abd1d..6dbf413e4e5b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -5,6 +5,8 @@ * Copyright 2021 Google LLC. */ +#include + &dsi0_out { remote-endpoint = <&sn65dsi86_in>; data-lanes = <0 1 2 3>; From 0417a86b200b4da1dff73e9f4bd7743346e5565b Mon Sep 17 00:00:00 2001 From: Philip Chen Date: Fri, 29 Oct 2021 15:27:41 -0700 Subject: [PATCH 11/92] arm64: dts: qcom: sc7180: Specify "data-lanes" for DSI host output MSM DSI host driver actually parses "data-lanes" in DT and compare it with the number of DSI lanes the bridge driver sets for mipi_dsi_device. So we need to always specify "data-lanes" for the DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts fragment, but missing in parade-ps8640 dts fragment, which requires a fixup. Since we'll do 4-lane DSI regardless of which bridge chip is used, instead of adding "data-lanes" to parade-ps8640 dts fragment, let's just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi. Signed-off-by: Philip Chen Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211029152647.v3.2.If23c83a786fc4d318a1986f43803f22b4b1d82cd@changeid --- arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 1 - arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index 6dbf413e4e5b..f869e6a343c1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -9,7 +9,6 @@ &dsi0_out { remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; }; edp_brij_i2c: &i2c2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index d4f4441179fc..bd5909ffb3dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -603,6 +603,10 @@ &dsi0 { vdda-supply = <&vdda_mipi_dsi0_1p2>; }; +&dsi0_out { + data-lanes = <0 1 2 3>; +}; + &dsi_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi0_pll>; From 7624b41b3379e664f074137001fc2e44bc1f5eaf Mon Sep 17 00:00:00 2001 From: Philip Chen Date: Fri, 29 Oct 2021 15:27:42 -0700 Subject: [PATCH 12/92] arm64: dts: qcom: sc7180: Support Lazor/Limozeen rev9 Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the second source edp bridge. To support different edp bridge chips in different board revisions, now we move the #incldue line of the edp bridge dts fragment (e.g. sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to per-board-rev dts files. Since the edp bridge dts fragment overrides 'dsi0_out', which is defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from "sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before the #include line of the edp bridge dts fragment. Signed-off-by: Philip Chen Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211029152647.v3.3.Ie56f55924f5c7706fe3194e710bbef6fdb8b5bc6@changeid --- arch/arm64/boot/dts/qcom/Makefile | 9 +++- .../sc7180-trogdor-lazor-limozeen-nots-r4.dts | 2 +- .../sc7180-trogdor-lazor-limozeen-nots-r5.dts | 31 +++++++++++++ ...sc7180-trogdor-lazor-limozeen-nots-r9.dts} | 8 ++-- .../qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 46 +++++++++++++++++++ ...s => sc7180-trogdor-lazor-limozeen-r9.dts} | 6 ++- .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 2 + .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 2 + .../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 9 +++- .../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 9 +++- .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 8 +++- .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 22 +++++++++ .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 30 ++++++++++++ .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 18 ++++++++ .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 3 -- 15 files changed, 188 insertions(+), 17 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen-nots.dts => sc7180-trogdor-lazor-limozeen-nots-r9.dts} (60%) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen.dts => sc7180-trogdor-lazor-limozeen-r9.dts} (82%) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6b816eb33309..f637c4d3729f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -64,9 +64,14 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts index 6ebde0828550..850776c5323d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -5,7 +5,7 @@ * Copyright 2020 Google LLC. */ -#include "sc7180-trogdor-lazor-limozeen-nots.dts" +#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts" / { model = "Google Lazor Limozeen without Touchscreen (rev4)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts new file mode 100644 index 000000000000..f360ff27226e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)"; + /* No sku5 post-rev5 */ + compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6", + "google,lazor-rev6-sku6", "google,lazor-rev7-sku6", + "google,lazor-rev8-sku6", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&panel { + compatible = "innolux,n116bca-ea1", "innolux,n116bge"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts similarity index 60% rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 0456c7e05d00..4e35aec6a1e5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -2,17 +2,19 @@ /* * Google Lazor Limozeen board device tree source * - * Copyright 2020 Google LLC. + * Copyright 2021 Google LLC. */ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Lazor Limozeen without Touchscreen"; - compatible = "google,lazor-sku6", "google,lazor-sku5", "qcom,sc7180"; + model = "Google Lazor Limozeen without Touchscreen (rev9+)"; + compatible = "google,lazor-sku6", "qcom,sc7180"; }; /delete-node/&ap_ts; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts new file mode 100644 index 000000000000..42b4bbcc76f4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen (rev4 - rev8)"; + compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4", + "google,lazor-rev6-sku4", "google,lazor-rev7-sku4", + "google,lazor-rev8-sku4", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts similarity index 82% rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index e6ad6dae4e60..dc47842bc662 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -2,16 +2,18 @@ /* * Google Lazor Limozeen board device tree source * - * Copyright 2020 Google LLC. + * Copyright 2021 Google LLC. */ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Lazor Limozeen"; + model = "Google Lazor Limozeen (rev9+)"; compatible = "google,lazor-sku4", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index 30e3e769d2b4..b142006478ea 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -7,6 +7,8 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index c2ef06367baf..59740799fa3a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -7,6 +7,8 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index dcb41afdc82a..18ef9da71998 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -7,12 +7,17 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev3+) with KB Backlight"; - compatible = "google,lazor-sku2", "qcom,sc7180"; + model = "Google Lazor (rev3 - 8) with KB Backlight"; + compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2", + "google,lazor-rev5-sku2", "google,lazor-rev6-sku2", + "google,lazor-rev7-sku2", "google,lazor-rev8-sku2", + "qcom,sc7180"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index be44900602d7..c5c9feff41b8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -7,12 +7,17 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Lazor (rev3+) with LTE"; - compatible = "google,lazor-sku0", "qcom,sc7180"; + model = "Google Lazor (rev3 - 8) with LTE"; + compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0", + "google,lazor-rev5-sku0", "google,lazor-rev6-sku0", + "google,lazor-rev7-sku0", "google,lazor-rev8-sku0", + "qcom,sc7180"; }; &ap_sar_sensor { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts index b474df47cd70..7adcedbf080d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -7,10 +7,14 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev3+)"; - compatible = "google,lazor", "qcom,sc7180"; + model = "Google Lazor (rev3 - 8)"; + compatible = "google,lazor-rev3", "google,lazor-rev4", + "google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7", + "google,lazor-rev8", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts new file mode 100644 index 000000000000..7f5c015e1ecb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev9+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts new file mode 100644 index 000000000000..344b57c035d0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev9+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts new file mode 100644 index 000000000000..83f6a4eb5ae5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev9+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 8b79fbb75756..69666f92176a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -5,13 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" &ap_sar_sensor { semtech,cs0-ground; From 3922ccaed4ac9dab5087fc5f20d319cc55765afa Mon Sep 17 00:00:00 2001 From: Philip Chen Date: Fri, 29 Oct 2021 15:27:43 -0700 Subject: [PATCH 13/92] arm64: dts: qcom: sc7180: Support Homestar rev4 Support Homestar rev4 board where Parade ps8640 is added as the second source edp bridge. Support different edp bridge chips in different board revisions, now we move the #incldue line of the edp bridge dts fragment (e.g. sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-homestar.dtsi" to per-board-rev dts files. Since the edp bridge dts fragment overrides 'dsi0_out', which is defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from "sc7180-trogdor-homestar.dtsi" to per-board-rev dts files too, before the #include line of the edp bridge dts fragment. Signed-off-by: Philip Chen Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211029152647.v3.4.If7aaa8e36f1269acae5488035bd62ce543756bf8@changeid --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sc7180-trogdor-homestar-r2.dts | 2 ++ .../dts/qcom/sc7180-trogdor-homestar-r3.dts | 6 ++++-- .../dts/qcom/sc7180-trogdor-homestar-r4.dts | 17 +++++++++++++++++ .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 3 --- 5 files changed, 24 insertions(+), 5 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f637c4d3729f..ba99aba1d51a 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts index db6c2da67cea..70032983fb65 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -7,6 +7,8 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts index 3fd8aa5bb7a6..e92e2e9e48ed 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -7,9 +7,11 @@ /dts-v1/; +#include "sc7180.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" / { - model = "Google Homestar (rev3+)"; - compatible = "google,homestar", "qcom,sc7180"; + model = "Google Homestar (rev3)"; + compatible = "google,homestar-rev3", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts new file mode 100644 index 000000000000..fb27106bbb4a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev4+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index 4ab890b2a1d4..f32369af1351 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -5,13 +5,10 @@ * Copyright 2021 Google LLC. */ -#include "sc7180.dtsi" - ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { /* BOARD-SPECIFIC TOP LEVEL NODES */ From c41910f257a22dc406c60d8826b4a3b5398003a3 Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Sat, 30 Oct 2021 12:04:12 +0200 Subject: [PATCH 14/92] arm64: dts: qcom: msm8996: drop not documented adreno properties These properties aren't documented nor implemented in the driver. Drop them. Fixes warnings as: $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml ... arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml ... Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions") Signed-off-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index bccc2d0b35a8..1ac78d9909ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -987,9 +987,6 @@ gpu: gpu@b00000 { nvmem-cells = <&speedbin_efuse>; nvmem-cell-names = "speed_bin"; - qcom,gpu-quirk-two-pass-use-wfi; - qcom,gpu-quirk-fault-detect-mask; - operating-points-v2 = <&gpu_opp_table>; status = "disabled"; From 30a7f99befc655cb3eacdd3a0f2394a5209a492f Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 11 Nov 2021 19:46:28 +0100 Subject: [PATCH 15/92] arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform) Add support for SONY Xperia XZ2, XZ2 Compact and XZ3 smartphones, all based on the Qualcomm SDM845 chipset. There also exists a fourth Tama device, the XZ2 Premium (Aurora) with a 4K display, but it's relatively rare. The devices are affected by a scary UFS behaviour where sending a certain UFS command (which is worked around on downstream) renders the device unbootable, by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly disabled for now. Downstream workaround: https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561 This platform's bootloader is not very nice either. To boot mainline you need to flash a bogus DTBO (fastboot erasing may cut it, but it takes an inhumane amount of time) - one that's just 4 bytes (all zeroes) seems to work just fine. Of course, one can also provide a "normal" DTBO (device-specific DT overlayed on top of the SoC DT), but that's not yet supported by the mainline kernel build system. Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Martin Botka Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211111184630.605035-1-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/Makefile | 3 + .../qcom/sdm845-sony-xperia-tama-akari.dts | 13 + .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 29 ++ .../qcom/sdm845-sony-xperia-tama-apollo.dts | 13 + .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 438 ++++++++++++++++++ 5 files changed, 496 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index ba99aba1d51a..4906712e3cfd 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -97,6 +97,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts new file mode 100644 index 000000000000..34f84f1f1eb4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2"; + compatible = "sony,akari-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts new file mode 100644 index 000000000000..8a0d94e7f598 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ3"; + compatible = "sony,akatsuki-row", "qcom,sdm845"; +}; + +/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ +&vreg_l14a_1p8 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; +}; + +&vreg_l22a_2p8 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&vreg_l28a_2p8 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts new file mode 100644 index 000000000000..c9e62c72f60e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2 Compact"; + compatible = "sony,apollo-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi new file mode 100644 index 000000000000..281fe6dea62a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include "sdm845.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ + qcom,board-id = <8 0>; + + gpio-keys { + compatible = "gpio-keys"; + + /* Neither Camera Focus, nor Camera Shutter seem to work... */ + + vol-down { + label = "volume_down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + /* SONY was cool and didn't diverge from MTP this time, yay! */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_0p9>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; + vdd-l3-l11-supply = <&vreg_s7a_0p9>; + vdd-l4-l5-supply = <&vreg_s7a_0p9>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l9-supply = <&vreg_s5a_1p9>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p3>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p3: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_0p9: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p9: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p7: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p7: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p7: ldo19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = ; + + /* + * The driver *really* doesn't want this regualtor to exist, + * saying that it could not get the current voltage (-ENOTRECOVERABLE) + * even though it surely is used on these devices (as a voltage + * source for camera autofocus) + */ + status = "disabled"; + }; + + vreg_l20a_2p7: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p7: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p8: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p0: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p1: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p0: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_2p8: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + src_vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Synaptics touchscreen @ 2c, 3c */ +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1355 @ 8, c */ + /* NXP PN547 NFC @ 28 */ + /* Renesas IDTP9221 Qi charger @ 61 */ +}; + +&i2c14 { + status = "okay"; + clock-frequency = <400000>; + + /* SONY ToF sensor @ 52 */ + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p7>; + vqmmc-supply = <&vreg_l13a_1p8>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default_state>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; +}; From e2bbebf3b04c62fc3f7e64525c43bf5118a3cc88 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Nov 2021 03:29:45 +0300 Subject: [PATCH 16/92] arm64: dts: qcom: apq8096-db820c: specify adsp firmware name Specify firmware name to be used for the ADSP. Quoting Bjorn from the respective apq8016-sbc commit: The firmware for the modem and WiFi subsystems platform specific and is signed with a OEM specific key (or a test key). In order to support more than a single device it is therefor not possible to rely on the default path and stash these files directly in the firmware directory. Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104002949.2204727-1-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index d01a512634cf..7e7b416e7d21 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -166,6 +166,7 @@ bluetooth { &adsp_pil { status = "okay"; + firmware-name = "qcom/apq8096/adsp.mbn"; }; &blsp2_i2c1 { From 7c57dcae949d1d39068f1e92233a9bc2dc7dcfba Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Nov 2021 03:29:46 +0300 Subject: [PATCH 17/92] arm64: dts: qcom: apq8096-db820c: add missing regulator details Specify that S11 (well, whole block of s8+s9+s10+s11) of pm8994 and S2 (s2 + s3) of pmi8994 are supplied by vph_pwr. While we are at it, add regulator name to S11, so that is displayed as VDD_APCC in the system. Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104002949.2204727-2-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 7e7b416e7d21..9dbac589482b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -633,6 +633,8 @@ &pm8994_mpps { &pm8994_spmi_regulators { qcom,saw-reg = <&saw3>; + vdd_s11-supply = <&vph_pwr>; + s9 { qcom,saw-slave; }; @@ -641,6 +643,7 @@ s10 { }; s11 { qcom,saw-leader; + regulator-name = "VDD_APCC"; regulator-always-on; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -673,6 +676,8 @@ pinconf { }; &pmi8994_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + vdd_gfx: s2@1700 { reg = <0x1700 0x100>; regulator-name = "VDD_GFX"; From a49c3dd1f7827fa7ee3a861b4292dd7d1c346fb2 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Nov 2021 03:29:47 +0300 Subject: [PATCH 18/92] arm64: dts: qcom: apq8096-db820c: correct lvs1 and lvs2 supply property The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to specify the supply regulator for LVS1 and LVS2 (following the pin name in the PMIC datasheet). Correct the board's device tree property, so that the regulator supply is setup properly. Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104002949.2204727-3-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 9dbac589482b..28403d2ffd31 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -715,7 +715,7 @@ pm8994-regulators { vdd_l17_l29-supply = <&vph_pwr_bbyp>; vdd_l20_l21-supply = <&vph_pwr_bbyp>; vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; vreg_s3a_1p3: s3 { regulator-name = "vreg_s3a_1p3"; From 227ee1583ba4b3bb973e2a3e32351c242fdfc49d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Nov 2021 03:29:48 +0300 Subject: [PATCH 19/92] arm64: dts: qcom: msm8994-sony-xperia-kitakami: correct lvs1 and lvs2 supply property The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to specify the supply regulator for LVS1 and LVS2 (following the pin name in the PMIC datasheet). Correct the board's device tree property, so that the regulator supply is setup properly. Cc: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104002949.2204727-4-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 48de66bf19c4..7cc564d8ca7c 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -223,7 +223,7 @@ pm8994_regulators: pm8994-regulators { vdd_l17_l29-supply = <&pmi8994_bby>; vdd_l20_l21-supply = <&pmi8994_bby>; vdd_l25-supply = <&pm8994_s3>; - vdd_lvs1_lvs2-supply = <&pm8994_s4>; + vdd_lvs1_2-supply = <&pm8994_s4>; /* S1, S2, S6 and S12 are managed by RPMPD */ From 4c821bd42ccceca5e0fdc5491374e3d7e6941c2e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Nov 2021 03:29:49 +0300 Subject: [PATCH 20/92] arm64: dts: qcom: msm8996-sony-xperia-tone: fix SPMI regulators declaration Device tree for the Sony Xperia tone family of devices specifies S9+S10+S11 SAW regulator as a part of the pmi8994_spmi_regulators device tree node. However PMI8994 does not have these regulators, they are part of the PM8994 device. All other MSM8996-based devices list them in the pm8994_spmi_regulators device tree node. Move them accordingly. Cc: AngeloGioacchino Del Regno Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104002949.2204727-5-dmitry.baryshkov@linaro.org --- .../dts/qcom/msm8996-sony-xperia-tone.dtsi | 35 ++++++++++--------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index ff7f39d29dd5..137b2d14f5e3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -589,9 +589,27 @@ pmi-gpio10-nc { }; }; -&pmi8994_spmi_regulators { +&pm8994_spmi_regulators { qcom,saw-reg = <&saw3>; + pm8994_s9: s9 { + qcom,saw-slave; + }; + + pm8994_s10: s10 { + qcom,saw-slave; + }; + + pm8994_s11: s11 { + qcom,saw-leader; + regulator-name = "vdd_apcc"; + regulator-always-on; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + }; +}; + +&pmi8994_spmi_regulators { vdd_gfx: pmi8994_s2: s2 { /* Pinned to a high value for now to avoid random crashes. */ @@ -600,21 +618,6 @@ pmi8994_s2: s2 { regulator-name = "vdd_gfx"; regulator-always-on; }; - - pmi8994_s9: s9 { - qcom,saw-slave; - }; - - pmi8994_s10: s10 { - qcom,saw-slave; - }; - - pmi8994_s11: s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <470000>; - regulator-max-microvolt = <1140000>; - }; }; &pmi8994_wled { From 25fdaae63a6927efad2f6c0428622712f0eb20dd Mon Sep 17 00:00:00 2001 From: Yassine Oudjana Date: Thu, 4 Nov 2021 10:49:58 +0000 Subject: [PATCH 21/92] arm64: dts: qcom: msm8996-xiaomi-scorpio: Add touchkey controller Add a node and pin states for Cypress StreetFighter touchkey controller. Signed-off-by: Yassine Oudjana Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104104932.104046-1-y.oudjana@protonmail.com --- .../boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index e5b8402b1ed6..27a45ddbb5bd 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -60,6 +60,20 @@ &adsp_pil { }; &blsp2_i2c6 { + touchkey: touchkey@28 { + compatible = "cypress,sf3155"; + reg = <0x28>; + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + linux,keycodes = ; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchkey_default>; + pinctrl-1 = <&touchkey_sleep>; + }; + touchscreen: atmel-mxt-ts@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; @@ -416,6 +430,20 @@ &tlmm { "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ + touchkey_default: touchkey_default { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + touchkey_sleep: touchkey_sleep { + pins = "gpio77"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen_default { pins = "gpio75", "gpio125"; function = "gpio"; From de0a2ae359ef9ccbaab86cce44d442cd0ca36985 Mon Sep 17 00:00:00 2001 From: Yassine Oudjana Date: Thu, 4 Nov 2021 11:15:18 +0000 Subject: [PATCH 22/92] arm64: dts: qcom: msm8996-xiaomi-common: Change TUSB320 to TUSB320L This platform actually doesn't have TUSB320, but rather TUSB320L. The TUSB320 compatible string was used due to lack of support for TUSB320L, and it was close enough to detect cable plug-in and direction, but it was limited to upstream facing port mode only. Now that support for TUSB320L is added[1], change node name and compatible to match and allow it to be properly reset and have its mode set to dual-role port. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=ce0320bd3872038569be360870e2d5251b975692 Signed-off-by: Yassine Oudjana Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211104111454.105875-1-y.oudjana@protonmail.com --- arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 01e573f0dfbf..7a9fcbe9bb31 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -207,8 +207,8 @@ &blsp2_i2c3 { status = "okay"; label = "TYPEC_I2C"; - typec: tusb320@47 { - compatible = "ti,tusb320"; + typec: tusb320l@47 { + compatible = "ti,tusb320l"; reg = <0x47>; interrupt-parent = <&tlmm>; interrupts = <63 IRQ_TYPE_EDGE_RISING>; From 5663ca59bb4f1dfd2501f2af0bfdca93c4d47b3a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 28 Sep 2021 10:20:02 +0800 Subject: [PATCH 23/92] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY QUSB2 PHY requires vdd-supply for digital circuit operation. Add it for platforms that miss it. Signed-off-by: Shawn Guo Acked-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210928022002.26286-4-shawn.guo@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 ++ arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 + 4 files changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 28403d2ffd31..f623db8451f1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -233,6 +233,7 @@ &hdmi_phy { &hsusb_phy1 { status = "okay"; + vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; @@ -240,6 +241,7 @@ &hsusb_phy1 { &hsusb_phy2 { status = "okay"; + vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 137b2d14f5e3..3bb50cecd62d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -184,6 +184,7 @@ &camera2_rst { &hsusb_phy1 { status = "okay"; + vdd-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; vdda-phy-dpdm-supply = <&pm8994_l24>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 3f60575a351c..b3b352530d76 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -102,6 +102,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */ &qusb2phy { status = "okay"; + vdd-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 654188027f79..9823d48a91b1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -260,6 +260,7 @@ pinconf { &qusb2phy { status = "okay"; + vdd-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; From f0360a7c1742681c390f2d94bb876ce80a8012b1 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:40 +0100 Subject: [PATCH 24/92] arm64: dts: qcom: sm8350: Move gpio.h inclusion to SoC DTSI Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-1-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 1 - arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 1 - arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 + 3 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index be062377c936..1e5e9405d8b1 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include #include #include "sm8350.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 06eedbe52c42..122c282a62df 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include #include #include "sm8350.dtsi" #include "pm8350.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index d134280e2939..ee183f00dbaf 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include From e84d04a2b221153b88f644d98b5902c3705f5348 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:41 +0100 Subject: [PATCH 25/92] arm64: dts: qcom: sm8350: Add missing QUPv3 ID2 Add the missing third QUPv3 master node. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-2-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index ee183f00dbaf..6cfe1f38dae9 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -597,6 +597,18 @@ ipcc: mailbox@408000 { #mbox-cells = <2>; }; + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; From f4d4ca9f3934844b99af289cf38d4892c73f683e Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:42 +0100 Subject: [PATCH 26/92] arm64: dts: qcom: sm8350: Add redistributor stride to GICv3 The redistributor properties were missing. Add them. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-3-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 6cfe1f38dae9..a30ba3193d84 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1020,6 +1020,8 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ interrupts = ; From ed9500c1df59437856d43e657f185fb1eb5d817d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:43 +0100 Subject: [PATCH 27/92] arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer Arch timer runs at 19.2 MHz. Specify the rate in the timer node. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-4-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a30ba3193d84..60866a20a55c 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2484,5 +2484,6 @@ timer { , , ; + clock-frequency = <19200000>; }; }; From 9e7f7b65c7f04c5cfda97d6bd0d452a49e60f24e Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:44 +0100 Subject: [PATCH 28/92] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts Using interrupts = <&pdc X Y> makes the interrupt framework interpret this as the &pdc-nth range of the main interrupt controller (GIC). Fix it. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-5-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 973e18fe3b67..cd55797facf6 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -631,7 +631,7 @@ tsens0: thermal-sensor@c263000 { reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ #qcom,sensors = <16>; - interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; @@ -642,7 +642,7 @@ tsens1: thermal-sensor@c265000 { reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ #qcom,sensors = <16>; - interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 60866a20a55c..f3e8549c6572 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -923,7 +923,7 @@ tsens0: thermal-sensor@c263000 { reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ #qcom,sensors = <15>; - interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; @@ -934,7 +934,7 @@ tsens1: thermal-sensor@c265000 { reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ #qcom,sensors = <14>; - interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; From f52dd33943ca5f84ae76890f352f6d9e12512c3f Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:45 +0100 Subject: [PATCH 29/92] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name Thermal zone names should not be longer than 20 names, which is indicated by a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to fix it. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-6-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index f3e8549c6572..7e0aa4c25094 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2462,7 +2462,7 @@ camera1_alert0: trip-point0 { }; }; - camera-thermal-bottom { + cam-thermal-bottom { polling-delay-passive = <250>; polling-delay = <1000>; From 2dab7aac493df72f57498044cb38ca0a6c18e7e1 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:46 +0100 Subject: [PATCH 30/92] arm64: dts: qcom: *8350* Consolidate PON/RESIN usage Disable PON/RESIN keys by default and keep the RESIN keycode set-per-board, as these settings are not common between devices (one cannot even assume all devices have buttons nowadays..). Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-7-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 7 ++++--- arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 9 +++++++++ 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 769f9726806f..0f94c46a1444 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -19,16 +19,17 @@ pmk8350_pon: pon@1300 { compatible = "qcom,pm8998-pon"; reg = <0x1300>; - pwrkey { + pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; linux,code = ; + status = "disabled"; }; - resin { + pon_resin: resin { compatible = "qcom,pmk8350-resin"; interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; - linux,code = ; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 122c282a62df..52cf3045602f 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -289,6 +289,15 @@ &pmk8350_rtc { status = "okay"; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = ; +}; + &qupv3_id_0 { status = "okay"; }; From 9ea9eb36b3c046fc48e737db4de69f7acd12f9be Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:47 +0100 Subject: [PATCH 31/92] arm64: dts: qcom: sm8350: Describe GCC dependency clocks Add all the clock names that the GCC driver expects to get via DT, so that the clock handles can be filled as the development progresses. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-8-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 7e0aa4c25094..3d0d80e61405 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -584,8 +584,30 @@ gcc: clock-controller@100000 { #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clock-names = "bi_tcxo", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "ufs_card_rx_symbol_0_clk", + "ufs_card_rx_symbol_1_clk", + "ufs_card_tx_symbol_0_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk", + "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; }; ipcc: mailbox@408000 { From cf03cd7e12bdb43d624dbd55d8467b29e9b608c2 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:48 +0100 Subject: [PATCH 32/92] arm64: dts: qcom: sm8350: Set up WRAP0 QUPs Set up I2C&SPI hosts and UARTs connected to WRAP0 and their respective pins. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-9-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 287 +++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 3d0d80e61405..4b864fcb04e0 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -619,6 +619,25 @@ ipcc: mailbox@408000 { #mbox-cells = <2>; }; + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -642,6 +661,84 @@ qupv3_id_0: geniqup@9c0000 { ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@98c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x0098c000 0 0x4000>; @@ -650,6 +747,140 @@ uart2: serial@98c000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default_state>; interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* QUP no. 3 seems to be strictly SPI-only */ + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1017,6 +1248,62 @@ tx { }; }; + qup_uart6_default: qup-uart6-default { + pins = "gpio30", "gpio31"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_default: qup-i2c0-default { + pins = "gpio4", "gpio5"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default { + pins = "gpio8", "gpio9"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio12", "gpio13"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default { + pins = "gpio20", "gpio21"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default { + pins = "gpio24", "gpio25"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default { + pins = "gpio28", "gpio29"; + function = "qup6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default { + pins = "gpio32", "gpio33"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c13_default_state: qup-i2c13-default-state { mux { pins = "gpio0", "gpio1"; From 8934535531c875e6ec67876905982a44e8306c1c Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:49 +0100 Subject: [PATCH 33/92] arm64: dts: qcom: sm8350: Set up WRAP1 QUPs Set up I2C&SPI hosts and UARTs connected to WRAP1 and their respective pins. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-10-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 213 +++++++++++++++++++++++++-- 1 file changed, 202 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 4b864fcb04e0..033d3984d572 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -638,6 +638,25 @@ opp-100000000 { }; }; + qup_opp_table_120mhz: qup-120mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -898,18 +917,161 @@ qupv3_id_1: geniqup@ac0000 { ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_default_state>; + pinctrl-0 = <&qup_i2c13_default>; interrupts = ; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; apps_smmu: iommu@15000000 { @@ -1304,17 +1466,46 @@ qup_i2c7_default: qup-i2c7-default { bias-disable; }; - qup_i2c13_default_state: qup-i2c13-default-state { - mux { - pins = "gpio0", "gpio1"; - function = "qup13"; - }; + qup_i2c8_default: qup-i2c8-default { + pins = "gpio36", "gpio37"; + function = "qup8"; + drive-strength = <2>; + bias-pull-up; + }; - config { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-pull-up; - }; + qup_i2c9_default: qup-i2c9-default { + pins = "gpio40", "gpio41"; + function = "qup9"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default { + pins = "gpio44", "gpio45"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_default: qup-i2c11-default { + pins = "gpio48", "gpio49"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_default: qup-i2c12-default { + pins = "gpio52", "gpio53"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_default: qup-i2c13-default { + pins = "gpio0", "gpio1"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; }; }; From 98374e6925b88cfc4e528faed230a835f91a576d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:50 +0100 Subject: [PATCH 34/92] arm64: dts: qcom: sm8350: Set up WRAP2 QUPs Set up I2C&SPI hosts and UARTs connected to WRAP2 and their respective pins. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-11-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 200 +++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 033d3984d572..944ad864f73e 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -667,6 +667,164 @@ qupv3_id_2: geniqup@8c0000 { #size-cells = <2>; ranges; status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* QUP no. 18 seems to be strictly SPI/UART-only */ + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart18_default>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; qupv3_id_0: geniqup@9c0000 { @@ -1417,6 +1575,13 @@ qup_uart6_default: qup-uart6-default { bias-disable; }; + qup_uart18_default: qup-uart18-default { + pins = "gpio58", "gpio59"; + function = "qup18"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c0_default: qup-i2c0-default { pins = "gpio4", "gpio5"; function = "qup0"; @@ -1507,6 +1672,41 @@ qup_i2c13_default: qup-i2c13-default { drive-strength = <2>; bias-pull-up; }; + + qup_i2c14_default: qup-i2c14-default { + pins = "gpio56", "gpio57"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-default { + pins = "gpio60", "gpio61"; + function = "qup15"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c16_default: qup-i2c16-default { + pins = "gpio64", "gpio65"; + function = "qup16"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c17_default: qup-i2c17-default { + pins = "gpio72", "gpio73"; + function = "qup17"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c19_default: qup-i2c19-default { + pins = "gpio76", "gpio77"; + function = "qup19"; + drive-strength = <2>; + bias-disable; + }; }; rng: rng@10d3000 { From 9bc2c8fea55c12d3720a80a59f99fdf68b8de773 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:51 +0100 Subject: [PATCH 35/92] arm64: dts: qcom: sm8350: Assign iommus property to QUP WRAPs Assign the iommus property to allow access to QUP hosts that were not set up by the bootloader. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-12-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 944ad864f73e..0ea735d0df49 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -663,6 +663,7 @@ qupv3_id_2: geniqup@8c0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x5e3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -833,6 +834,7 @@ qupv3_id_0: geniqup@9c0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1070,6 +1072,7 @@ qupv3_id_1: geniqup@ac0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0>; #address-cells = <2>; #size-cells = <2>; ranges; From c2721b0c23d975c73bce68d40435d66fbab19047 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:52 +0100 Subject: [PATCH 36/92] arm64: dts: qcom: Add support for Xperia 1 III / 5 III Add support for SONY Xperia 1 III (PDX215) and 5 III (PDX214) smartphones. Both are based on the SM8350 Sagami platform and feature some really high-end specs, such as: - 4K (1 III / PRO-I) / 1080p (5 III), 120Hz HDR OLED 10-bit panels - USB-C 3.1 with HDMI in (yes, phone as display!) and DP out - 5G - 8 or 12 gigs of ram, 128/256/512 gigs of storage - A 3.5mm headphone jack, a RGB notification LED and a uSD card slot :) - IP65/68 dust/water resistance - Dual front-firing speakers and a lot of microphones - Crazy complex camera hardware (especially on the PRO-I), which includes 4 cameras, an RGBIR sensor and a 3D iToF The aforementioned PRO-I (PDX217) is not supported in this patch, because even though it shares most of the code with 1 III, nobody really has it (yet?) This only adds basic support for booting to a USB shell with a bootloader-enabled display, support for all the awesome hardware listed above will (hopefully) come (hopefully) soon. In order to get a working boot image, you need to run (e.g. for 1 III): cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8350-sony-xperia-\ sagami-pdx215.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 11 \ --os_patch_level 2021-10 \ # or newer -o boot.img-sony-xperia-pdx215 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: fastboot flash boot boot.img-sony-xperia-pdx215 fastboot erase vendor_boot fastboot flash dtbo emptydtbo.img fastboot reboot Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-13-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/Makefile | 2 + .../qcom/sm8350-sony-xperia-sagami-pdx214.dts | 19 +++ .../qcom/sm8350-sony-xperia-sagami-pdx215.dts | 13 ++ .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 132 ++++++++++++++++++ 4 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4906712e3cfd..50572419dca9 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -116,3 +116,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts new file mode 100644 index 000000000000..cc650508dc2d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8350-sony-xperia-sagami.dtsi" + +/ { + model = "Sony Xperia 5 III"; + compatible = "sony,pdx214-generic", "qcom,sm8350"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts new file mode 100644 index 000000000000..d21bbeb603a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8350-sony-xperia-sagami.dtsi" + +/ { + model = "Sony Xperia 1 III"; + compatible = "sony,pdx215-generic", "qcom,sm8350"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi new file mode 100644 index 000000000000..b50f04ffee95 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + /* + * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350! + * Adding it will cause the bootloader to go crazy and randomly crash + * shortly after closing UEFI boot services.. Perhaps that has something + * to do with the OS running inside a VM now..? + */ + + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@e1000000 { + compatible = "simple-framebuffer"; + reg = <0 0xe1000000 0 0x2300000>; + + /* The display, even though it's 4K, initializes at 1080-ish p */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ + + vol-down { + label = "Volume Down"; + linux,code = ; + gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + reserved-memory { + cont_splash_mem: memory@e1000000 { + reg = <0 0xe1000000 0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; + console-size = <0x40000>; + record-size = <0x1000>; + no-map; + }; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = ; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; From 1209e9246632d93f557c651110533bf44f8335f3 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:53 +0100 Subject: [PATCH 37/92] arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes Based on current driver availability, add either nodes or comments regarding peripherals connected via I2C/SPI. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-14-konrad.dybcio@somainline.org --- .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index b50f04ffee95..c44376aa0742 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -75,6 +75,93 @@ ramoops@ffc00000 { }; }; +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* Some subset of SONY IMX663 camera sensor @ 38 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <1000000>; + + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; +}; + +&i2c12 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c17 { + status = "okay"; + clock-frequency = <1000000>; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + &pmk8350_rtc { status = "okay"; }; @@ -100,8 +187,22 @@ &qupv3_id_2 { status = "okay"; }; +&spi14 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + &tlmm { gpio-reserved-ranges = <44 4>; + + ts_int_default: ts-int-default { + pin = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; }; /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ From ce2762aec7378892d398b784a4bfd4856dd71043 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:54 +0100 Subject: [PATCH 38/92] arm64: dts: qcom: sm8350-sagami: Configure remote processors Configure ADSP, CDSP, MPSS, SLPI and IPA on SoMC Sagami. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-15-konrad.dybcio@somainline.org --- .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index c44376aa0742..90b13cbe2fa6 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -75,6 +75,16 @@ ramoops@ffc00000 { }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/adsp.mbn"; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/cdsp.mbn"; +}; + &i2c1 { status = "okay"; clock-frequency = <1000000>; @@ -162,6 +172,17 @@ &i2c17 { /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ }; +&ipa { + status = "okay"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/ipa_fws.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/modem.mbn"; +}; + &pmk8350_rtc { status = "okay"; }; @@ -187,6 +208,11 @@ &qupv3_id_2 { status = "okay"; }; +&slpi { + status = "okay"; + firmware-name = "qcom/slpi.mbn"; +}; + &spi14 { status = "okay"; From 9ac8999e8d6c05826664a61bc89509824f45621d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 14 Nov 2021 02:27:55 +0100 Subject: [PATCH 39/92] arm64: dts: qcom: sm8350: Add LLCC node Configure the Last-Level Cache Controller for SM8350. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211114012755.112226-16-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 0ea735d0df49..7323ed74f41a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2232,6 +2232,12 @@ gem_noc: interconnect@9100000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8350-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; From 96e1e3a15273a99d89b1389e4487e734c7d37d8e Mon Sep 17 00:00:00 2001 From: yangcong Date: Mon, 15 Nov 2021 11:01:55 +0800 Subject: [PATCH 40/92] arm64: dts: qcom: sc7180: Fix ps8640 power sequence for Homestar rev4 When powering up the ps8640, we need to deassert PD right after we turn on the vdd33 regulator. Unfortunately, the vdd33 regulator takes some time (~4ms) to turn on. Add in the delay for the vdd33 regulator so that when the driver deasserts PD that the regulator has had time to ramp. Signed-off-by: yangcong Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211115030155.9395-1-yangcong5@huaqin.corp-partner.google.com --- arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts index fb27106bbb4a..0de0c97f5728 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts @@ -15,3 +15,7 @@ / { model = "Google Homestar (rev4+)"; compatible = "google,homestar", "qcom,sc7180"; }; + +&pp3300_brij_ps8640 { + regulator-enable-ramp-delay = <4000>; +}; From fa09b2248714c64644576d8064e9bd292a504a0e Mon Sep 17 00:00:00 2001 From: Prasad Malisetty Date: Tue, 16 Nov 2021 16:31:46 +0530 Subject: [PATCH 41/92] arm64: dts: qcom: sc7280: Fix incorrect clock name Replace pcie_1_pipe-clk clock name with pcie_1_pipe_clk To match with dt binding. Fixes: ab7772de8612 ("arm64: dts: qcom: SC7280: Add rpmhcc clock controller node") Signed-off-by: Prasad Malisetty Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1637060508-30375-2-git-send-email-pmaliset@codeaurora.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index e4988ea2011c..f14fed538022 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -581,7 +581,7 @@ gcc: clock-controller@100000 { <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>, <0>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", - "pcie_0_pipe_clk", "pcie_1_pipe-clk", + "pcie_0_pipe_clk", "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk"; From bd7d507935ca73fba6b6f0f52a3d08d77b143c58 Mon Sep 17 00:00:00 2001 From: Prasad Malisetty Date: Tue, 16 Nov 2021 16:31:47 +0530 Subject: [PATCH 42/92] arm64: dts: qcom: sc7280: Add pcie clock support Add pcie clock phandle for sc7280 SoC. Signed-off-by: Prasad Malisetty Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1637060508-30375-3-git-send-email-pmaliset@codeaurora.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index f14fed538022..5b8f549e1e8b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -579,7 +579,8 @@ gcc: clock-controller@100000 { reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <0>, <0>, <0>, <0>, <0>; + <0>, <&pcie1_lane 0>, + <0>, <0>, <0>, <0>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", From 66b788133030f0c69a0ecc7f72f7939b119c9a69 Mon Sep 17 00:00:00 2001 From: Prasad Malisetty Date: Tue, 16 Nov 2021 16:31:48 +0530 Subject: [PATCH 43/92] arm64: dts: qcom: sc7280: Fix 'interrupt-map' parent address cells Update interrupt-map parent address cells for sc7280 Similar to existing Qcom SoCs. Fixes: 92e0ee9f8 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes") Signed-off-by: Prasad Malisetty Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1637060508-30375-4-git-send-email-pmaliset@codeaurora.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 5b8f549e1e8b..40b409f279f5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1598,10 +1598,10 @@ pcie1: pci@1c08000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, From b139425115b801e56fe2d6dbcd2e798be87e2e06 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:20 +0700 Subject: [PATCH 44/92] arm64: dts: qcom: sdm630: Assign numbers to eMMC and SD This makes eMMC/SD device number consistent. Reviewed-by: Martin Botka Signed-off-by: Dang Huynh Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-2-danct12@riseup.net --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 3e0165bb61c5..b75bb87ed290 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -19,6 +19,11 @@ / { #address-cells = <2>; #size-cells = <2>; + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + }; + chosen { }; clocks { From 9f6cbe37a72fc9dafe8f560e557c93209cc100e7 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:21 +0700 Subject: [PATCH 45/92] arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsi It's not worth duplicating the same node over and over again, so let's keep the common bits in the pm660 DTSI, making only changing the status and keycode necessary. Also, disable RESIN/PWR by default just in case if there are devices that doesn't use them. Reviewed-by: Konrad Dybcio Signed-off-by: Dang Huynh Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-3-danct12@riseup.net --- arch/arm64/boot/dts/qcom/pm660.dtsi | 12 +++++++++++- .../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 16 ++++++++-------- 2 files changed, 19 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index d0ef8a1675e2..c482663aad56 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -54,14 +54,24 @@ pon: pon@800 { mode-bootloader = <0x2>; mode-recovery = <0x1>; - pwrkey { + pon_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = ; + + status = "disabled"; }; + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; }; pm660_temp: temp-alarm@2400 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 11d0a8c1cf35..e90c9ec84675 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -215,14 +215,14 @@ &blsp2_uart1 { /* HCI Bluetooth */ }; -&pon { - volup { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; }; &qusb2phy { From 262a8ad19cdfd8e177d32bfbec1691a2069951b1 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:22 +0700 Subject: [PATCH 46/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Add RPM and fixed regulators Add most of the RPM PM660/PM660L regulators and the fixed ones, defining the common electrical part of this platform. Signed-off-by: Dang Huynh Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-4-danct12@riseup.net --- .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 266 ++++++++++++++++++ 1 file changed, 266 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 1edc53fd6941..eccbeecef192 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -1,11 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2020, Alexey Minnekhanov + * Copyright (c) 2021, Dang Huynh */ /dts-v1/; #include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" / { model = "Xiaomi Redmi Note 7"; @@ -20,6 +23,16 @@ chosen { stdout-path = "serial0:115200n8"; }; + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -40,6 +53,259 @@ &blsp1_uart2 { status = "okay"; }; +&rpm_requests { + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + }; + + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + /* SDHCI 3.3V signal doesn't seem to be supported. */ + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l3b_3p3: l3 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <500>; + }; + }; + + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <525000>; + regulator-max-microvolt = <950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1370000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-always-on; + }; + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + }; +}; + &tlmm { gpio-reserved-ranges = <8 4>; }; From 4c420a0449ce0882f225e6e7ae3edc87becd2e85 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:23 +0700 Subject: [PATCH 47/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Add PWRKEY and RESIN This enables the volume down key as well as the power button. Reviewed-by: Konrad Dybcio Signed-off-by: Dang Huynh Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-5-danct12@riseup.net --- arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index eccbeecef192..9a6684922804 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -53,6 +53,16 @@ &blsp1_uart2 { status = "okay"; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + &rpm_requests { pm660l-regulators { compatible = "qcom,rpm-pm660l-regulators"; From cf85e9aee210fefd7a85c1ced0a73382e5edcfd0 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:25 +0700 Subject: [PATCH 48/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD This commit enable the SD card slot and internal MMC. Signed-off-by: Dang Huynh Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-7-danct12@riseup.net --- .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 9a6684922804..264a8f50db66 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -316,6 +316,25 @@ vreg_l19a_3p3: l19 { }; }; +&sdhc_1 { + status = "okay"; + supports-cqe; + + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + &tlmm { gpio-reserved-ranges = <8 4>; }; From e631e904e1d89650e3c8facdfb37cfca3491a52d Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Sun, 21 Nov 2021 04:42:26 +0700 Subject: [PATCH 49/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Enable Simple Framebuffer This lets the user sees the framebuffer console. Reviewed-by: Konrad Dybcio Signed-off-by: Dang Huynh Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-8-danct12@riseup.net --- .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 264a8f50db66..95c1518bb52d 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -20,7 +20,20 @@ aliases { }; chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1080 * 2340 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; }; vph_pwr: vph-pwr-regulator { @@ -46,6 +59,11 @@ ramoops@a0000000 { ftrace-size = <0x0>; pmsg-size = <0x20000>; }; + + framebuffer_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x23ff000>; + no-map; + }; }; }; From e5d3e752b050e03d2046011a3865721a3f200216 Mon Sep 17 00:00:00 2001 From: Alexey Min Date: Sun, 21 Nov 2021 04:42:27 +0700 Subject: [PATCH 50/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB Enable and configure DWC3 and QUSB2 PHY to enable USB functionality on the Redmi Note 7. Signed-off-by: Alexey Min Co-developed-by: Dang Huynh Signed-off-by: Dang Huynh Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211120214227.779742-9-danct12@riseup.net --- .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 95c1518bb52d..d042e3883b9e 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -65,6 +65,15 @@ framebuffer_mem: memory@9d400000 { no-map; }; }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; }; &blsp1_uart2 { @@ -81,6 +90,13 @@ &pon_resin { linux,code = ; }; +&qusb2phy { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + &rpm_requests { pm660l-regulators { compatible = "qcom,rpm-pm660l-regulators"; @@ -356,3 +372,12 @@ &sdhc_2 { &tlmm { gpio-reserved-ranges = <8 4>; }; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; From 8e0e8016cb797c38eea8641e8b77a5780c4614ac Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 10 Nov 2021 16:53:30 -0500 Subject: [PATCH 51/92] arm64: dts: qcom: sm8250: Add CPU opp tables Add OPP tables to scale DDR and L3 with CPUs for SM8250 SoCs. Signed-off-by: Thara Gopinath Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211110215330.74257-1-thara.gopinath@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 314 +++++++++++++++++++++++++++ 1 file changed, 314 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index c46c35a74601..40f18d539d80 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -99,6 +99,9 @@ CPU0: cpu@0 { dynamic-power-coefficient = <205>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -118,6 +121,9 @@ CPU1: cpu@100 { dynamic-power-coefficient = <205>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -134,6 +140,9 @@ CPU2: cpu@200 { dynamic-power-coefficient = <205>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -150,6 +159,9 @@ CPU3: cpu@300 { dynamic-power-coefficient = <205>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -166,6 +178,9 @@ CPU4: cpu@400 { dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -182,6 +197,9 @@ CPU5: cpu@500 { dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -199,6 +217,9 @@ CPU6: cpu@600 { dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -215,6 +236,9 @@ CPU7: cpu@700 { dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -259,6 +283,296 @@ core7 { }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp3: opp-518400000 { + opp-hz = /bits/ 64 <518400000>; + opp-peak-kBps = <800000 16588800>; + }; + + cpu0_opp4: opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-peak-kBps = <800000 16588800>; + }; + + cpu0_opp5: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <800000 19660800>; + }; + + cpu0_opp6: opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp7: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <1804000 23347200>; + }; + + cpu0_opp8: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 26419200>; + }; + + cpu0_opp9: opp-1075200000 { + opp-hz = /bits/ 64 <1075200000>; + opp-peak-kBps = <1804000 29491200>; + }; + + cpu0_opp10: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <1804000 32563200>; + }; + + cpu0_opp11: opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <1804000 36249600>; + }; + + cpu0_opp12: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <2188000 36249600>; + }; + + cpu0_opp13: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <2188000 39321600>; + }; + + cpu0_opp14: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 42393600>; + }; + + cpu0_opp15: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <3072000 42393600>; + }; + + cpu0_opp16: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 42393600>; + }; + + cpu0_opp17: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 42393600>; + }; + }; + + cpu4_opp_table: cpu4_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu4_opp2: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 23347200>; + }; + + cpu4_opp3: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 26419200>; + }; + + cpu4_opp4: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 26419200>; + }; + + cpu4_opp5: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 29491200>; + }; + + cpu4_opp6: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 29491200>; + }; + + cpu4_opp7: opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu4_opp8: opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu4_opp9: opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <5412000 39321600>; + }; + + cpu4_opp10: opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <5412000 42393600>; + }; + + cpu4_opp11: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <5412000 45465600>; + }; + + cpu4_opp12: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 45465600>; + }; + + cpu4_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <6220000 48537600>; + }; + + cpu4_opp14: opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <7216000 48537600>; + }; + + cpu4_opp15: opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu4_opp16: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu4_opp17: opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp18: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + cpu7_opp_table: cpu7_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp1: opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu7_opp2: opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-peak-kBps = <2188000 26419200>; + }; + + cpu7_opp3: opp-1075200000 { + opp-hz = /bits/ 64 <1075200000>; + opp-peak-kBps = <3072000 26419200>; + }; + + cpu7_opp4: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <3072000 29491200>; + }; + + cpu7_opp5: opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu7_opp6: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu7_opp7: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 36249600>; + }; + + cpu7_opp8: opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <5412000 39321600>; + }; + + cpu7_opp9: opp-1747200000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <5412000 42393600>; + }; + + cpu7_opp10: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 45465600>; + }; + + cpu7_opp11: opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <6220000 48537600>; + }; + + cpu7_opp12: opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <7216000 48537600>; + }; + + cpu7_opp13: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu7_opp14: opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu7_opp15: opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp16: opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp17: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp18: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp19: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp20: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + firmware { scm: scm { compatible = "qcom,scm"; From 1c0ac047bbfb3efd6549d18c3ca47aa0afedcfbe Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 19 Nov 2021 22:39:53 +0100 Subject: [PATCH 52/92] arm64: dts: qcom: msm8916: Add RPM sleep stats MSM8916 is similar to the other SoCs that had the RPM stats node added in commit 290bc6846547 ("arm64: dts: qcom: Enable RPM Sleep stats"). However, the dynamic offset readable at 0x14 seems only available on some of the newer firmware versions. To be absolutely sure, make use of the new qcom,msm8916-rpm-stats compatible that reads the sleep stats from a fixed offset of 0xdba0. Statistics are available for a "vmin" and "xosd" low power mode: $ cat /sys/kernel/debug/qcom_stats/vmin Count: 0 Last Entered At: 0 Last Exited At: 0 Accumulated Duration: 0 Client Votes: 0x0 $ cat /sys/kernel/debug/qcom_stats/xosd Count: 0 Last Entered At: 0 Last Exited At: 0 Accumulated Duration: 0 Client Votes: 0x0 Cc: Maulik Shah Signed-off-by: Stephan Gerhold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211119213953.31970-4-stephan@gerhold.net --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index c1c42f26b61e..9044eb41a81d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -453,6 +453,11 @@ rpm_msg_ram: sram@60000 { reg = <0x00060000 0x8000>; }; + sram@290000 { + compatible = "qcom,msm8916-rpm-stats"; + reg = <0x00290000 0x10000>; + }; + bimc: interconnect@400000 { compatible = "qcom,msm8916-bimc"; reg = <0x00400000 0x62000>; From 6867430332655cfb0880e0e7576ea4eb786d50fc Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Mon, 22 Nov 2021 00:04:49 +0700 Subject: [PATCH 53/92] arm64: dts: qcom: sdm660-xiaomi-lavender: Add volume up button This enables the volume up key. Signed-off-by: Dang Huynh Tested-by: Alexey Minnekhanov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211121170449.1124048-1-danct12@riseup.net --- arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index d042e3883b9e..dcbaacf18f66 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -9,6 +9,8 @@ #include "sdm660.dtsi" #include "pm660.dtsi" #include "pm660l.dtsi" +#include +#include / { model = "Xiaomi Redmi Note 7"; @@ -46,6 +48,17 @@ vph_pwr: vph-pwr-regulator { regulator-boot-on; }; + gpio-keys { + compatible = "gpio-keys"; + + volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; From 95dcb997772e966919987b6dd96eb9a6212402eb Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Tue, 23 Nov 2021 23:24:37 +0700 Subject: [PATCH 54/92] arm64: dts: qcom: Drop input-name property This property doesn't seem to exist in the documentation nor in source code, but for some reason it is defined in a bunch of device trees. Signed-off-by: Dang Huynh Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211123162436.1507341-1-danct12@riseup.net --- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 1 - arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 1 - arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 1 - arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 3 --- arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 2 -- arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 1 - arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 1 - 7 files changed, 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 69fcb6b0398d..84558ab5fe86 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -42,7 +42,6 @@ framebuffer0: framebuffer@3404000 { gpio_keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; autorepeat; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 3a3790a52a2c..cc038f9b641f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -62,7 +62,6 @@ divclk4: divclk4 { gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; autorepeat; volupkey { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 7cc564d8ca7c..dde7ed159c4d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -29,7 +29,6 @@ / { gpio_keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; autorepeat; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 3d495ce3f46a..dc5b9b274df3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -29,7 +29,6 @@ extcon_usb: extcon-usb { gpio-hall-sensors { compatible = "gpio-keys"; - input-name = "hall-sensors"; label = "Hall sensors"; pinctrl-names = "default"; pinctrl-0 = <&hall_sensor1_default>; @@ -46,7 +45,6 @@ hall-sensor1 { gpio-kb-extra-keys { compatible = "gpio-keys"; - input-name = "extra-kb-keys"; label = "Keyboard extra keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_kb_pins_extra>; @@ -102,7 +100,6 @@ alt { gpio-keys { compatible = "gpio-keys"; - input-name = "side-buttons"; label = "Side buttons"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 91e391282181..47488a1aecae 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -93,7 +93,6 @@ vph_pwr: vph-pwr-regulator { gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, @@ -126,7 +125,6 @@ camera-focus { gpio-hall-sensor { compatible = "gpio-keys"; - input-name = "hall-sensors"; label = "Hall sensors"; pinctrl-names = "default"; pinctrl-0 = <&hall_sensor0_default>; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index e90c9ec84675..42af1fade461 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -90,7 +90,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg { gpio_keys { status = "okay"; compatible = "gpio-keys"; - input-name = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 45eab0235d66..871ccbba445b 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -42,7 +42,6 @@ extcon_usb: extcon-usb { gpio-keys { status = "okay"; compatible = "gpio-keys"; - input-name = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; autorepeat; From 7a21328bb3ade238e35c4de81da3ad8d76437b72 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 29 Nov 2021 17:01:34 +0530 Subject: [PATCH 55/92] dt-bindings: arm: qcom: Document qcom,sc7280-crd board Document the qcom,sc7280-crd board based off sc7280 SoC, The board is also known as hoglin in the Chrome OS builds, so document the google,hoglin compatible as well. Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1638185497-26477-2-git-send-email-quic_rjendra@quicinc.com --- Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index c8808e0f9e64..41e1d781e43f 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -201,8 +201,10 @@ properties: - items: - enum: + - qcom,sc7280-crd - qcom,sc7280-idp - qcom,sc7280-idp2 + - google,hoglin - google,piglin - google,senor - const: qcom,sc7280 From 427b249504ea48e9af2014df4b22fe8b31ddb563 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 29 Nov 2021 17:01:35 +0530 Subject: [PATCH 56/92] arm64: dts: qcom: sc7280-crd: Add device tree files for CRD CRD (Compute Reference Design) is a sc7280 based board, largely derived from the existing IDP board design with some key deltas 1. has EC and H1 over SPI similar to IDP2 2. touchscreen and trackpad support 3. eDP display We just add the barebones dts file here, subsequent patches will add support for EC/H1 and other components. Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1638185497-26477-3-git-send-email-quic_rjendra@quicinc.com --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sc7280-crd.dts | 31 +++++++++++++++++++++++++ 2 files changed, 32 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 50572419dca9..7f26ec20d238 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts new file mode 100644 index 000000000000..2da6603c38dc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 CRD board device tree source + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280-idp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform"; + compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; + +&nvme_pwren { + pins = "gpio51"; +}; From 248da168fbae5ab7294a37428256acc570ed552a Mon Sep 17 00:00:00 2001 From: Kshitiz Godara Date: Mon, 29 Nov 2021 17:01:36 +0530 Subject: [PATCH 57/92] arm64: dts: qcom: sc7280: Define EC and H1 nodes for IDP/CRD The IDP2 and CRD boards share the EC and H1 parts, so define all related device nodes into a common file and include them in the idp2 and crd dts files to avoid duplication. Signed-off-by: Kshitiz Godara Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1638185497-26477-4-git-send-email-quic_rjendra@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-crd.dts | 1 + .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 105 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 1 + 3 files changed, 107 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts index 2da6603c38dc..1e3e2f360b6e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-idp.dtsi" +#include "sc7280-idp-ec-h1.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi new file mode 100644 index 000000000000..0896a6151817 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 EC/H1 over SPI (common between IDP2 and CRD) + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +ap_ec_spi: &spi10 { + status = "okay"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include +#include + +ap_h1_spi: &spi14 { + status = "okay"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>; + cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + + cr50: tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <104 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&tlmm { + ap_ec_int_l: ap-ec-int-l { + pins = "gpio18"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pins = "gpio104"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + pins = "gpio43"; + output-high; + }; + + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high { + pins = "gpio59"; + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 3ae99697d893..0382c770650a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-idp.dtsi" +#include "sc7280-idp-ec-h1.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform"; From 3ebf11fa4a355116eb2a69a46114ec92f245dbcc Mon Sep 17 00:00:00 2001 From: Kshitiz Godara Date: Mon, 29 Nov 2021 17:01:37 +0530 Subject: [PATCH 58/92] arm64: dts: qcom: sc7280-crd: Add Touchscreen and touchpad support Add Touchscreen and touchpad hid-over-i2c node for the sc7280 CRD board Signed-off-by: Kshitiz Godara Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1638185497-26477-5-git-send-email-quic_rjendra@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-crd.dts | 61 +++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts index 1e3e2f360b6e..cd2755ce530d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts @@ -23,6 +23,47 @@ chosen { }; }; +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&vreg_l18b_1p8>; + + wakeup-source; + }; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&vreg_l19b_1p8>; + }; +}; + &nvme_3v3_regulator { gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; }; @@ -30,3 +71,23 @@ &nvme_3v3_regulator { &nvme_pwren { pins = "gpio51"; }; + +&tlmm { + tp_int_odl: tp-int-odl { + pins = "gpio7"; + function = "gpio"; + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio55"; + function = "gpio"; + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio54"; + function = "gpio"; + bias-disable; + }; +}; From d0bfc92303dde7f13fac1873c25a3bee913bfef3 Mon Sep 17 00:00:00 2001 From: Martin Botka Date: Tue, 30 Nov 2021 22:23:31 +0100 Subject: [PATCH 59/92] arm64: dts: qcom: sm6125: Add RPMPD node Add RPM Power Distribution node for sm6125 SoC. Signed-off-by: Martin Botka Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211130212332.25401-3-martin.botka@somainline.org --- arch/arm64/boot/dts/qcom/sm6125.dtsi | 50 ++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 51286ddbdb10..a501e8788c51 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -302,6 +302,56 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,sm6125-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = ; + }; + }; + }; }; }; From 556a9f3ae17ef19deecac130fea38f258d5abeb2 Mon Sep 17 00:00:00 2001 From: Martin Botka Date: Tue, 30 Nov 2021 22:23:32 +0100 Subject: [PATCH 60/92] arm64: dts: qcom: sm6125: Add power domains to sdhc Add RPM Power Domains to internal eMMC and SDCard. Signed-off-by: Martin Botka Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211130212332.25401-4-martin.botka@somainline.org --- arch/arm64/boot/dts/qcom/sm6125.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index a501e8788c51..e81b2a7794fb 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -448,6 +448,9 @@ sdhc_1: sdhci@4744000 { <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd SM6125_VDDCX>; + bus-width = <8>; non-removable; status = "disabled"; @@ -471,6 +474,8 @@ sdhc_2: sdhci@4784000 { pinctrl-1 = <&sdc2_state_off>; pinctrl-names = "default", "sleep"; + power-domains = <&rpmpd SM6125_VDDCX>; + bus-width = <4>; status = "disabled"; }; From b0293c19d42f6d6951c2fab9a47fed50baf2c14d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 1 Dec 2021 05:05:59 +0300 Subject: [PATCH 61/92] arm64: dts: qcom: msm8916: fix MMC controller aliases Change sdhcN aliases to mmcN to make them actually work. Currently the board uses non-standard aliases sdhcN, which do not work, resulting in mmc0 and mmc1 hosts randomly changing indices between boots. Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes") Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211201020559.1611890-1-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 9044eb41a81d..41897eb3736a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -19,8 +19,8 @@ / { #size-cells = <2>; aliases { - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { }; From bd943653b10dc9df63ad6cb69f520c10f3f21372 Mon Sep 17 00:00:00 2001 From: Julian Ribbeck Date: Tue, 16 Nov 2021 21:07:34 +0100 Subject: [PATCH 62/92] arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5) Samsung J5 2015 is a MSM8916 based Smartphone. It is similar to some of the other MSM8916 devices, especially the Samsung ones. With this patch initial support for the following is added: - eMMC/SD card - Buttons - USB (although no suiting MUIC driver currently) - UART (untested for lack of equipment) - WiFi/Bluetooth (WCNSS) It is worth noting that Samsung J5 with MSM8916 exists in different generations (e.g Samsung J5 2015 and Samsung J5 2016) which each have different models (e.g. samsung-j5nlte, samsung-j5xnlte, etc). This patch is only regarding the 2015 generation, but should work with all of it's models, as far as we could test. Co-developed-by: Stephan Gerhold Signed-off-by: Stephan Gerhold Signed-off-by: Julian Ribbeck Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211116200734.73920-1-julian.ribbeck@gmx.de --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8916-samsung-j5.dts | 209 ++++++++++++++++++ 2 files changed, 210 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7f26ec20d238..693b30c51e33 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts new file mode 100644 index 000000000000..687bea438a57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include + +/ { + model = "Samsung Galaxy J5 (2015)"; + compatible = "samsung,j5", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home-key { + lable = "Home Key"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +/* FIXME: Replace with SM5703 MUIC when driver is available */ +&pm8916_usbin { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; + qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; From f56498fc6a9364a35dd74af791bd1251467e9cc1 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 13 Dec 2021 09:26:11 +0100 Subject: [PATCH 63/92] arm64: dts: qcom: sm6350: Fix validation errors Sort clocks and interrupts as specified in the docs and remove the stray property #power-domain-cells from aoss_qmp to solve dtbs_check validation errors. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213082614.22651-11-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index cd55797facf6..14e1071bcca4 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -531,10 +531,10 @@ usb_1_qmpphy: phy@88e9000 { ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&xo_board>, <&rpmhcc RPMH_QLINK_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&xo_board>; - clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; @@ -592,11 +592,12 @@ usb_1: usb@a6f8800 { "sleep"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -656,7 +657,6 @@ aoss_qmp: power-controller@c300000 { mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 { From 489be59b635ba76ea16d6f820ddf037644b3415a Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 13 Dec 2021 09:22:03 +0100 Subject: [PATCH 64/92] arm64: dts: qcom: sm6350: Add MPSS nodes Add the required nodes for booting the MPSS on sm6350. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213082208.21492-4-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 66 ++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 14e1071bcca4..b0d70eafe148 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -361,6 +361,32 @@ smem { hwlocks = <&tcsr_mutex 3>; }; + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -473,6 +499,46 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,sm6350-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_CX>, + <&rpmhpd SM6350_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&pil_modem_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + sdhc_2: sdhci@8804000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; From efc33c969f23cd6fe983e7e7bdcd8bbb1521f1de Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 13 Dec 2021 09:22:05 +0100 Subject: [PATCH 65/92] arm64: dts: qcom: sm6350: Add ADSP nodes Add the required nodes for booting the ADSP on sm6350. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213082208.21492-6-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 91 ++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index b0d70eafe148..fdd7d3b59533 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -361,6 +361,30 @@ smem { hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -499,6 +523,73 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + adsp: remoteproc@3000000 { + compatible = "qcom,sm6350-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_LCX>, + <&rpmhpd SM6350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0>; + qcom,nsessions = <5>; + }; + }; + }; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm6350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; From 8eb5287e8a425aa7b27cfbb92096550046a231f8 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 13 Dec 2021 09:22:07 +0100 Subject: [PATCH 66/92] arm64: dts: qcom: sm6350: Add CDSP nodes Add the required nodes for booting the CDSP on sm6350. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213082208.21492-8-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 122 +++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index fdd7d3b59533..d7c9edff19f7 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -385,6 +385,30 @@ smp2p_adsp_in: slave-kernel { }; }; + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -630,6 +654,104 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; }; + cdsp: remoteproc@8300000 { + compatible = "qcom,sm6350-cdsp-pas"; + reg = <0 0x08300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_CX>, + <&rpmhpd SM6350_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&pil_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x20>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x20>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x20>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x20>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x20>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x20>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x20>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x20>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + sdhc_2: sdhci@8804000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; From bc279dc04e9ee23f6a22f6c7a6924edbd5fe0f6d Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 13 Dec 2021 09:22:08 +0100 Subject: [PATCH 67/92] arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213082208.21492-9-luca.weiss@fairphone.com --- .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index a6937642736e..d4af9e0dad87 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -53,6 +53,27 @@ volume-up { gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; }; }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + memory@efe01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xefe01000 0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; }; &apps_rsc { @@ -269,6 +290,16 @@ vreg_bob: bob { }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; +}; + &pm6350_gpios { gpio_keys_pin: gpio-keys-pin { pins = "gpio2"; From 72a0ca203ca7fae34fe61668906fe483b97d9039 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 7 Dec 2021 17:10:02 +0530 Subject: [PATCH 68/92] dt-bindings: clock: Add SM8450 GCC clock bindings Add device tree bindings for global clock controller on SM8450 SoCs. Signed-off-by: Vinod Koul Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211207114003.100693-2-vkoul@kernel.org --- .../bindings/clock/qcom,gcc-sm8450.yaml | 85 ++++++ include/dt-bindings/clock/qcom,gcc-sm8450.h | 244 ++++++++++++++++++ 2 files changed, 329 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8450.h diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml new file mode 100644 index 000000000000..58d98a766de6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8450 + +maintainers: + - Vinod Koul + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8450 + + See also: + - dt-bindings/clock/qcom,gcc-sm8450.h + +properties: + compatible: + const: qcom,gcc-sm8450 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source (Optional clock) + - description: PCIE 1 Pipe clock source (Optional clock) + - description: PCIE 1 Phy Auxillary clock source (Optional clock) + - description: UFS Phy Rx symbol 0 clock source (Optional clock) + - description: UFS Phy Rx symbol 1 clock source (Optional clock) + - description: UFS Phy Tx symbol 0 clock source (Optional clock) + - description: USB3 Phy wrapper pipe clock source (Optional clock) + minItems: 2 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: pcie_0_pipe_clk # Optional clock + - const: pcie_1_pipe_clk # Optional clock + - const: pcie_1_phy_aux_clk # Optional clock + - const: ufs_phy_rx_symbol_0_clk # Optional clock + - const: ufs_phy_rx_symbol_1_clk # Optional clock + - const: ufs_phy_tx_symbol_0_clk # Optional clock + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock + minItems: 2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include + clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x00100000 0x001f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/include/dt-bindings/clock/qcom,gcc-sm8450.h b/include/dt-bindings/clock/qcom,gcc-sm8450.h new file mode 100644 index 000000000000..cf1469312c4c --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-sm8450.h @@ -0,0 +1,244 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8450_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8450_H + +/* GCC HW clocks */ +#define CORE_BI_PLL_TEST_SE 0 +#define PCIE_0_PIPE_CLK 1 +#define PCIE_1_PHY_AUX_CLK 2 +#define PCIE_1_PIPE_CLK 3 +#define UFS_PHY_RX_SYMBOL_0_CLK 4 +#define UFS_PHY_RX_SYMBOL_1_CLK 5 +#define UFS_PHY_TX_SYMBOL_0_CLK 6 +#define USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK 7 + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_0_AXI_CLK 8 +#define GCC_AGGRE_NOC_PCIE_1_AXI_CLK 9 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 10 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 11 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 12 +#define GCC_ANOC_PCIE_PWRCTL_CLK 13 +#define GCC_BOOT_ROM_AHB_CLK 14 +#define GCC_CAMERA_AHB_CLK 15 +#define GCC_CAMERA_HF_AXI_CLK 16 +#define GCC_CAMERA_SF_AXI_CLK 17 +#define GCC_CAMERA_XO_CLK 18 +#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 19 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 20 +#define GCC_CPUSS_AHB_CLK 21 +#define GCC_CPUSS_AHB_CLK_SRC 22 +#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC 23 +#define GCC_CPUSS_CONFIG_NOC_SF_CLK 24 +#define GCC_DDRSS_GPU_AXI_CLK 25 +#define GCC_DDRSS_PCIE_SF_TBU_CLK 26 +#define GCC_DISP_AHB_CLK 27 +#define GCC_DISP_HF_AXI_CLK 28 +#define GCC_DISP_SF_AXI_CLK 29 +#define GCC_DISP_XO_CLK 30 +#define GCC_EUSB3_0_CLKREF_EN 31 +#define GCC_GP1_CLK 32 +#define GCC_GP1_CLK_SRC 33 +#define GCC_GP2_CLK 34 +#define GCC_GP2_CLK_SRC 35 +#define GCC_GP3_CLK 36 +#define GCC_GP3_CLK_SRC 37 +#define GCC_GPLL0 38 +#define GCC_GPLL0_OUT_EVEN 39 +#define GCC_GPLL4 40 +#define GCC_GPLL9 41 +#define GCC_GPU_CFG_AHB_CLK 42 +#define GCC_GPU_GPLL0_CLK_SRC 43 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 44 +#define GCC_GPU_MEMNOC_GFX_CLK 45 +#define GCC_GPU_SNOC_DVM_GFX_CLK 46 +#define GCC_PCIE_0_AUX_CLK 47 +#define GCC_PCIE_0_AUX_CLK_SRC 48 +#define GCC_PCIE_0_CFG_AHB_CLK 49 +#define GCC_PCIE_0_CLKREF_EN 50 +#define GCC_PCIE_0_MSTR_AXI_CLK 51 +#define GCC_PCIE_0_PHY_RCHNG_CLK 52 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 53 +#define GCC_PCIE_0_PIPE_CLK 54 +#define GCC_PCIE_0_PIPE_CLK_SRC 55 +#define GCC_PCIE_0_SLV_AXI_CLK 56 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 57 +#define GCC_PCIE_1_AUX_CLK 58 +#define GCC_PCIE_1_AUX_CLK_SRC 59 +#define GCC_PCIE_1_CFG_AHB_CLK 60 +#define GCC_PCIE_1_CLKREF_EN 61 +#define GCC_PCIE_1_MSTR_AXI_CLK 62 +#define GCC_PCIE_1_PHY_AUX_CLK 63 +#define GCC_PCIE_1_PHY_AUX_CLK_SRC 64 +#define GCC_PCIE_1_PHY_RCHNG_CLK 65 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 66 +#define GCC_PCIE_1_PIPE_CLK 67 +#define GCC_PCIE_1_PIPE_CLK_SRC 68 +#define GCC_PCIE_1_SLV_AXI_CLK 69 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 70 +#define GCC_PDM2_CLK 71 +#define GCC_PDM2_CLK_SRC 72 +#define GCC_PDM_AHB_CLK 73 +#define GCC_PDM_XO4_CLK 74 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 75 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 76 +#define GCC_QMIP_DISP_AHB_CLK 77 +#define GCC_QMIP_GPU_AHB_CLK 78 +#define GCC_QMIP_PCIE_AHB_CLK 79 +#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 80 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 81 +#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 82 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 83 +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 84 +#define GCC_QUPV3_WRAP0_CORE_CLK 85 +#define GCC_QUPV3_WRAP0_S0_CLK 86 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 87 +#define GCC_QUPV3_WRAP0_S1_CLK 88 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 89 +#define GCC_QUPV3_WRAP0_S2_CLK 90 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 91 +#define GCC_QUPV3_WRAP0_S3_CLK 92 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 93 +#define GCC_QUPV3_WRAP0_S4_CLK 94 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 95 +#define GCC_QUPV3_WRAP0_S5_CLK 96 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 97 +#define GCC_QUPV3_WRAP0_S6_CLK 98 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 99 +#define GCC_QUPV3_WRAP0_S7_CLK 100 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 101 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 102 +#define GCC_QUPV3_WRAP1_CORE_CLK 103 +#define GCC_QUPV3_WRAP1_S0_CLK 104 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 105 +#define GCC_QUPV3_WRAP1_S1_CLK 106 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 107 +#define GCC_QUPV3_WRAP1_S2_CLK 108 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 109 +#define GCC_QUPV3_WRAP1_S3_CLK 110 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 111 +#define GCC_QUPV3_WRAP1_S4_CLK 112 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 113 +#define GCC_QUPV3_WRAP1_S5_CLK 114 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 115 +#define GCC_QUPV3_WRAP1_S6_CLK 116 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 117 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 118 +#define GCC_QUPV3_WRAP2_CORE_CLK 119 +#define GCC_QUPV3_WRAP2_S0_CLK 120 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 121 +#define GCC_QUPV3_WRAP2_S1_CLK 122 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 123 +#define GCC_QUPV3_WRAP2_S2_CLK 124 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 125 +#define GCC_QUPV3_WRAP2_S3_CLK 126 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 127 +#define GCC_QUPV3_WRAP2_S4_CLK 128 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 129 +#define GCC_QUPV3_WRAP2_S5_CLK 130 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 131 +#define GCC_QUPV3_WRAP2_S6_CLK 132 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 133 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 134 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 135 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 136 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 137 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 138 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 139 +#define GCC_SDCC2_AHB_CLK 140 +#define GCC_SDCC2_APPS_CLK 141 +#define GCC_SDCC2_APPS_CLK_SRC 142 +#define GCC_SDCC2_AT_CLK 143 +#define GCC_SDCC4_AHB_CLK 144 +#define GCC_SDCC4_APPS_CLK 145 +#define GCC_SDCC4_APPS_CLK_SRC 146 +#define GCC_SDCC4_AT_CLK 147 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 148 +#define GCC_UFS_0_CLKREF_EN 149 +#define GCC_UFS_PHY_AHB_CLK 150 +#define GCC_UFS_PHY_AXI_CLK 151 +#define GCC_UFS_PHY_AXI_CLK_SRC 152 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 153 +#define GCC_UFS_PHY_ICE_CORE_CLK 154 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 155 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 156 +#define GCC_UFS_PHY_PHY_AUX_CLK 157 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 158 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 159 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 160 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 161 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 162 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 163 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 164 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 165 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 166 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 167 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 168 +#define GCC_USB30_PRIM_MASTER_CLK 169 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 170 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 171 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 172 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 173 +#define GCC_USB30_PRIM_SLEEP_CLK 174 +#define GCC_USB3_0_CLKREF_EN 175 +#define GCC_USB3_PRIM_PHY_AUX_CLK 176 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 177 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 178 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 179 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 180 +#define GCC_VIDEO_AHB_CLK 181 +#define GCC_VIDEO_AXI0_CLK 182 +#define GCC_VIDEO_AXI1_CLK 183 +#define GCC_VIDEO_XO_CLK 184 + +/* GCC resets */ +#define GCC_CAMERA_BCR 0 +#define GCC_DISPLAY_BCR 1 +#define GCC_GPU_BCR 2 +#define GCC_MMSS_BCR 3 +#define GCC_PCIE_0_BCR 4 +#define GCC_PCIE_0_LINK_DOWN_BCR 5 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 6 +#define GCC_PCIE_0_PHY_BCR 7 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 8 +#define GCC_PCIE_1_BCR 9 +#define GCC_PCIE_1_LINK_DOWN_BCR 10 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 11 +#define GCC_PCIE_1_PHY_BCR 12 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 13 +#define GCC_PCIE_PHY_BCR 14 +#define GCC_PCIE_PHY_CFG_AHB_BCR 15 +#define GCC_PCIE_PHY_COM_BCR 16 +#define GCC_PDM_BCR 17 +#define GCC_QUPV3_WRAPPER_0_BCR 18 +#define GCC_QUPV3_WRAPPER_1_BCR 19 +#define GCC_QUPV3_WRAPPER_2_BCR 20 +#define GCC_QUSB2PHY_PRIM_BCR 21 +#define GCC_QUSB2PHY_SEC_BCR 22 +#define GCC_SDCC2_BCR 23 +#define GCC_SDCC4_BCR 24 +#define GCC_UFS_PHY_BCR 25 +#define GCC_USB30_PRIM_BCR 26 +#define GCC_USB3_DP_PHY_PRIM_BCR 27 +#define GCC_USB3_DP_PHY_SEC_BCR 28 +#define GCC_USB3_PHY_PRIM_BCR 29 +#define GCC_USB3_PHY_SEC_BCR 30 +#define GCC_USB3PHY_PHY_PRIM_BCR 31 +#define GCC_USB3PHY_PHY_SEC_BCR 32 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 33 +#define GCC_VIDEO_AXI0_CLK_ARES 34 +#define GCC_VIDEO_AXI1_CLK_ARES 35 +#define GCC_VIDEO_BCR 36 + +/* GCC power domains */ +#define PCIE_0_GDSC 0 +#define PCIE_1_GDSC 1 +#define UFS_PHY_GDSC 2 +#define USB30_PRIM_GDSC 3 + +#endif From 8e6de09c716f37dbdc8181e803455603c89c4bd2 Mon Sep 17 00:00:00 2001 From: Caleb Connolly Date: Thu, 9 Dec 2021 22:59:38 +0000 Subject: [PATCH 69/92] arm64: dts: qcom: sdm845-oneplus-*: add msm-id and board-id The msm-id and board-id can be used to select the correct dtb when multiple are provided to the bootloader. Multiple DTBs can be provided on sdm845 devices using boot image header v1 by appending them all to the kernel image before creating the boot image. The bootloader then selects them like this: Best match DTB tags 321/00000008/0x00000000/20001/20014/20115/20018/0/(offset)0x79998E27/(size)0x000173CD Using pmic info 0x20014/0x20115/0x20018/0x0 for device 0x20014/0x20115/0x20018/0x0 Signed-off-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211209225938.2427342-1-caleb.connolly@linaro.org --- arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++ arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 73493079d13e..5936b47dee5f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -11,6 +11,8 @@ / { model = "OnePlus 6"; compatible = "oneplus,enchilada", "qcom,sdm845"; chassis-type = "handset"; + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <8 0 17819 22>; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index b63ebc48f62f..78a0b99144e6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -11,6 +11,8 @@ / { model = "OnePlus 6T"; compatible = "oneplus,fajita", "qcom,sdm845"; chassis-type = "handset"; + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <8 0 18801 41>; }; &display_panel { From c16160cfa5651039f886d5cc6a6d9129e1fe789d Mon Sep 17 00:00:00 2001 From: Katherine Perez Date: Thu, 9 Dec 2021 10:32:46 -0800 Subject: [PATCH 70/92] arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2 This is a minimal devicetree for Microsoft Surface Duo 2 with SM8350 Chipset Signed-off-by: Katherine Perez Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211209183246.842880-2-kaperez@linux.microsoft.com --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/sm8350-microsoft-surface-duo2.dts | 369 ++++++++++++++++++ 2 files changed, 370 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 693b30c51e33..a3eedb8b33ee 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts new file mode 100644 index 000000000000..9cb1d8455fd0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -0,0 +1,369 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2021, Microsoft Corporation + */ + +/dts-v1/; + +#include +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + model = "Microsoft Surface Duo 2"; + compatible = "microsoft,surface-duo2", "qcom,sm8350"; + chassis-type = "handset"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/adsp.mbn"; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l4c_uim1: ldo4 { + regulator-name = "vreg_l4c_uim1"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_uim2: ldo5 { + regulator-name = "vreg_l5c_uim2"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p96: ldo11 { + regulator-name = "vreg_l11c_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/cdsp.mbn"; +}; + +&ipa { + status = "okay"; + + memory-region = <&pil_ipa_fw_mem>; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/modem.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <4 4>, <12 4>, <56 4>, <76 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-max-microamp = <91600>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; From c02b360ca67ebeb9de07b47b2fe53f964c2561d1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 9 Dec 2021 17:53:41 +0000 Subject: [PATCH 71/92] arm64: dts: qcom: c630: Fix soundcard setup Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback. This setup has issues, ex if we try to play on headset the audio stream is also sent to SoundWire Speakers and we will hear sound in both headsets and speakers. Make a separate device for Speakers and Headset so that the streams are different and handled properly. Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support") Signed-off-by: Srinivas Kandagatla Tested-by: Steev Klimaszewski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211209175342.20386-2-srinivas.kandagatla@linaro.org --- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index d6b2ba4396f6..2e882a977e2c 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -523,6 +523,10 @@ dai@0 { dai@1 { reg = <1>; }; + + dai@2 { + reg = <2>; + }; }; &sound { @@ -535,6 +539,7 @@ &sound { "SpkrLeft IN", "SPK1 OUT", "SpkrRight IN", "SPK2 OUT", "MM_DL1", "MultiMedia1 Playback", + "MM_DL3", "MultiMedia3 Playback", "MultiMedia2 Capture", "MM_UL2"; mm1-dai-link { @@ -551,6 +556,13 @@ cpu { }; }; + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + slim-dai-link { link-name = "SLIM Playback"; cpu { @@ -580,6 +592,21 @@ codec { sound-dai = <&wcd9340 1>; }; }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; + }; + }; }; &tlmm { From ef10e1b89508d3315e47e23098fec60b33b1f6b3 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 9 Dec 2021 17:53:42 +0000 Subject: [PATCH 72/92] arm64: dts: qcom: c630: add headset jack and button detection support Add MBHC support available in WCD934X codec. Signed-off-by: Srinivas Kandagatla Tested-by: Steev Klimaszewski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211209175342.20386-3-srinivas.kandagatla@linaro.org --- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 2e882a977e2c..58845a14805f 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -771,6 +771,9 @@ &wcd9340{ vdd-tx-supply = <&vreg_s4a_1p8>; vdd-rx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; swm: swm@c85 { left_spkr: wsa8810-left{ From 202f69cd4e1dad6c86a35d8b29fc693877c6c91d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 2 Dec 2021 01:43:28 +0100 Subject: [PATCH 73/92] Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer" This reverts commit ed9500c1df59437856d43e657f185fb1eb5d817d. The clock-frequency property was meant to aid platforms with broken firmwares that don't set up the timer properly on their own. Don't include it where it is not the case. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211202004328.459899-1-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 7323ed74f41a..53b39e718fb6 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -3193,6 +3193,5 @@ timer { , , ; - clock-frequency = <19200000>; }; }; From 409fd3f10c0b71dabff735d5f290096d6bb6b4df Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Wed, 8 Dec 2021 19:47:06 +0100 Subject: [PATCH 74/92] arm64: qcom: dts: drop legacy property #stream-id-cells Property #stream-id-cells is legacy leftover and isn't currently documented nor used. Signed-off-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211208184707.100716-1-david@ixit.cz --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 - arch/arm64/boot/dts/qcom/msm8998.dtsi | 1 - arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 - arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 - arch/arm64/boot/dts/qcom/sdm630.dtsi | 1 - arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 - arch/arm64/boot/dts/qcom/sm8150.dtsi | 1 - arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 - 8 files changed, 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 1ac78d9909ab..91bc974aeb0a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -962,7 +962,6 @@ hdmi_phy: hdmi-phy@9a0600 { gpu: gpu@b00000 { compatible = "qcom,adreno-530.2", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0x00b00000 0x3f000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 408f265e277b..f273bc1ff629 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1446,7 +1446,6 @@ adreno_gpu: gpu@5000000 { iommus = <&adreno_smmu 0>; operating-points-v2 = <&gpu_opp_table>; power-domains = <&rpmpd MSM8998_VDDMX>; - #stream-id-cells = <16>; status = "disabled"; gpu_opp_table: opp-table { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index faf8b807d0ff..2151cd8c8c7a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1952,7 +1952,6 @@ glink-edge { gpu: gpu@5000000 { compatible = "qcom,adreno-618.0", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, <0 0x05061000 0 0x800>; reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 40b409f279f5..937c2e0e93eb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1753,7 +1753,6 @@ lpass_ag_noc: interconnect@3c40000 { gpu: gpu@3d00000 { compatible = "qcom,adreno-635.0", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0 0x03d00000 0 0x40000>, <0 0x03d9e000 0 0x1000>, <0 0x03d61000 0 0x800>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index b75bb87ed290..9217c3a51f79 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1019,7 +1019,6 @@ sd-cd { adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0x05000000 0x40000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 526087586ba4..ff344a9a81a6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4415,7 +4415,6 @@ dsi1_phy: dsi-phy@ae96400 { gpu: gpu@5000000 { compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; reg-names = "kgsl_3d0_reg_memory", "cx_mem"; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 81b4ff2cc4cd..6012322a5984 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1785,7 +1785,6 @@ gpu: gpu@2c00000 { compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; - #stream-id-cells = <16>; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 40f18d539d80..5617a46e5ccd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2399,7 +2399,6 @@ data2 { gpu: gpu@3d00000 { compatible = "qcom,adreno-650.2", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0 0x03d00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; From 4cc7c85cccc87e436a86b4281ddcd886eb0bf58f Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 4 Oct 2021 20:25:30 -0700 Subject: [PATCH 75/92] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is used to connect thermal zones with ADC channels. Signed-off-by: Bjorn Andersson Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20211005032531.2251928-4-bjorn.andersson@linaro.org --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 6f5bb6b37ec2..d09f2954b6f9 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -84,6 +84,16 @@ adc-chan@6 { }; }; + pm8998_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm-hc"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; From d5e12f3823aed1e35ee2411bdf0ab61dc1011387 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 4 Oct 2021 20:25:31 -0700 Subject: [PATCH 76/92] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones Downstream defines four ADC channels related to thermal sensors external to the PM8998 and two channels for internal voltage measurements. Add these to the upstream SDM845 MTP, describe the thermal monitor channels and add thermal_zones for these. Signed-off-by: Bjorn Andersson Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20211005032531.2251928-5-bjorn.andersson@linaro.org --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 140 ++++++++++++++++++++++++ 1 file changed, 140 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 5e6e8f4fb5be..7713e8060c5b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -9,6 +9,8 @@ #include #include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; @@ -45,6 +47,68 @@ vreg_s4a_1p8: pm8998-smps4 { vin-supply = <&vph_pwr>; }; + + thermal-zones { + xo_thermal: xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 1>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + msm_thermal: msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 2>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + pa_thermal: pa-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 3>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + quiet_thermal: quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 4>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + }; }; &adsp_pas { @@ -467,6 +531,82 @@ &mss_pil { firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; }; +&pm8998_adc { + adc-chan@4c { + reg = ; + label = "xo_therm"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + adc-chan@4d { + reg = ; + label = "msm_therm"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + adc-chan@4f { + reg = ; + label = "pa_therm1"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + adc-chan@51 { + reg = ; + label = "quiet_therm"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + adc-chan@83 { + reg = ; + label = "vph_pwr"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + adc-chan@85 { + reg = ; + label = "vcoin"; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8998_adc_tm { + status = "okay"; + + xo-thermistor@1 { + reg = <1>; + io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + msm-thermistor@2 { + reg = <2>; + io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-thermistor@3 { + reg = <3>; + io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-thermistor@4 { + reg = <4>; + io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &qupv3_id_1 { status = "okay"; }; From c8b9d64bb262033775ff64dde6ca7cf18899651b Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Mon, 13 Dec 2021 20:02:28 +0100 Subject: [PATCH 77/92] arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible Use correct compatible according to dt-binding. Fixes + few other lines of `make qcom/sdm845-oneplus-fajita.dtb`: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: qfprom@784000: compatible: ['qcom,qfprom'] is too short From schema: Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml Signed-off-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211213190228.106924-1-david@ixit.cz --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index ff344a9a81a6..cfdeaa81f1bb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1078,7 +1078,7 @@ gcc: clock-controller@100000 { }; qfprom@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,sdm845-qfprom", "qcom,qfprom"; reg = <0 0x00784000 0 0x8ff>; #address-cells = <1>; #size-cells = <1>; From 72cb4c48a46a7cfa58eb5842c0d3672ddd5bd9ad Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 7 Dec 2021 09:27:10 +0200 Subject: [PATCH 78/92] arm64: dts: qcom: ipq6018: Fix gpio-ranges property There must be three parameters in gpio-ranges property. Fixes this not very helpful error message: OF: /soc/pinctrl@1000000: (null) = 3 found 3 Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") Cc: Sricharan R Signed-off-by: Baruch Siach Tested-by: Bryan O'Donoghue Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 933b56103a46..66ec5615651d 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { interrupts = ; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 80>; + gpio-ranges = <&tlmm 0 0 80>; interrupt-controller; #interrupt-cells = <2>; From 5188049c9b36d718124e2cce91803a26a34a0ad6 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:30 +0530 Subject: [PATCH 79/92] arm64: dts: qcom: Add base SM8450 DTSI This add based DTSI for SM8450 SoC and includes base description of CPUs, GCC, RPMHCC, UART, interuupt-controller which helps to boot to shell with console on boards with this SoC Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-2-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 476 +++++++++++++++++++++++++++ 1 file changed, 476 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi new file mode 100644 index 000000000000..96fbf4be3f89 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -0,0 +1,476 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <274>; + exit-latency-us = <480>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <327>; + exit-latency-us = <1502>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <584>; + exit-latency-us = <2332>; + min-residency-us = <6118>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2893>; + exit-latency-us = <4023>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = ; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; +}; From ec950d55728459248e78f5c70ab3e3c2f7c22e38 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:31 +0530 Subject: [PATCH 80/92] arm64: dts: qcom: sm8450: Add tlmm nodes Add tlmm node found in SM8450 SoC and uart pin configuration Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-3-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 96fbf4be3f89..fb93d53d3433 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -343,6 +343,8 @@ uart7: serial@99c000 { reg = <0 0x0099c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -366,6 +368,32 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + }; + intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; From 285f97bc4b017b013d273a69ba3ee12252990812 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:32 +0530 Subject: [PATCH 81/92] arm64: dts: qcom: sm8450: Add reserved memory nodes Add the reserved memory nodes for SM8450. This is based on the downstream documentation. Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-4-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 221 +++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index fb93d53d3433..d9439c6ebfa2 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -310,6 +310,227 @@ CLUSTER_PD: cpu-cluster0 { }; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + camera_mem: memory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; From 892d5395396d5515c42e502810884225776b3b10 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:33 +0530 Subject: [PATCH 82/92] arm64: dts: qcom: sm8450: add smmu nodes Add the apps smmu node as found in the SM8450 SoC Signed-off-by: Vinod Koul Acked-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-5-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 103 +++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d9439c6ebfa2..d29680c405bf 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -615,6 +615,109 @@ qup_uart7_tx: qup-uart7-tx { }; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; From 24de05c38e6bfe80fccc3b632c142accfaa7232d Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:34 +0530 Subject: [PATCH 83/92] arm64: dts: qcom: Add base SM8450 QRD DTS Add DTS for Qualcomm QRD platform which uses SM8450 SoC and mark the reserved nodes. Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-6-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 33 +++++++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index a3eedb8b33ee..f7232052d286 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -121,3 +121,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts new file mode 100644 index 000000000000..8dcd41c4e5ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include "sm8450.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 QRD"; + compatible = "qcom,sm8450-qrd", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +}; + +&uart7 { + status = "okay"; +}; From 128914ad230354ab4af9c3b86fdce2147f467553 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:35 +0530 Subject: [PATCH 84/92] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes Add the RPMH regulators found in QRD-SM8450 platform Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-7-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 322 ++++++++++++++++++++++++ 1 file changed, 322 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 8dcd41c4e5ab..2ab19608a455 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include #include "sm8450.dtsi" / { @@ -18,6 +19,327 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; }; &qupv3_id_0 { From 07fa917a335e139a108e94085c6beac3098e3874 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:36 +0530 Subject: [PATCH 85/92] arm64: dts: qcom: sm8450: add ufs nodes Add the UFS and QMP PHY node for SM8450 SoC Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-8-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 72 ++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d29680c405bf..9556d2fc46e0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -815,6 +815,78 @@ rpmhcc: clock-controller { clocks = <&xo_board>; }; }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; }; timer { From 8f8f98c881686d21fc937f469d3a198f2f9bb9ba Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 15 Dec 2021 10:04:37 +0530 Subject: [PATCH 86/92] arm64: dts: qcom: sm8450-qrd: enable ufs nodes Enable the UFS and phy node and add the regulators used by them. Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-9-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 2ab19608a455..4b7ad190d538 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -353,3 +353,23 @@ &tlmm { &uart7 { status = "okay"; }; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; From 61eba74e473ed4cd64ec17440092f4a98913cda3 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 15 Dec 2021 10:04:38 +0530 Subject: [PATCH 87/92] arm64: dts: qcom: sm8450: Add rpmhpd node This adds RPMH power domain found in SM8450 SoC Signed-off-by: Dmitry Baryshkov Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-10-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 9556d2fc46e0..8fff4d54933f 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include / { @@ -814,6 +815,56 @@ rpmhcc: clock-controller { clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; }; ufs_mem_hc: ufshc@1d84000 { From 015a89f0d317dce4d2174059155c2fc39db7cbc8 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 15 Dec 2021 10:04:39 +0530 Subject: [PATCH 88/92] arm64: dts: qcom: sm8450: add cpufreq support The change adds a description of a SM8450 cpufreq-epss controller and references to it from CPU nodes. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-11-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 8fff4d54933f..56e3e8f771bd 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -44,6 +44,7 @@ CPU0: cpu@0 { next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -61,6 +62,7 @@ CPU1: cpu@100 { next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -75,6 +77,7 @@ CPU2: cpu@200 { next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -89,6 +92,7 @@ CPU3: cpu@300 { next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -103,6 +107,7 @@ CPU4: cpu@400 { next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -117,6 +122,7 @@ CPU5: cpu@500 { next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -132,6 +138,7 @@ CPU6: cpu@600 { next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -146,6 +153,7 @@ CPU7: cpu@700 { next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -867,6 +875,21 @@ rpmhpd_opp_turbo_l1: opp10 { }; }; + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; From bf0a257a9418ebcbe6ab2a73728f76969942e52a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 15 Dec 2021 10:04:40 +0530 Subject: [PATCH 89/92] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes Add device tree nodes for two i2c blocks: i2c13 and i2c14. Signed-off-by: Dmitry Baryshkov Signed-off-by: Vinod Koul Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211215043440.605624-12-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 52 ++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 56e3e8f771bd..62082ed5335d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -582,6 +582,44 @@ uart7: serial@99c000 { }; }; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -609,6 +647,20 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + qup_uart7_rx: qup-uart7-rx { pins = "gpio26"; function = "qup7"; From 19fd04fb9247fb5dce01919fa83ed037ec569247 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 16 Dec 2021 16:38:12 +0530 Subject: [PATCH 90/92] arm64: dts: qcom: sm8450: Add usb nodes SM8450 features a single USB controller which connects to both HS and SS phy. Add the USB and the phy nodes for Qualcomm SM8450 SoC. Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211216110813.658384-1-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 89 ++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 62082ed5335d..10c25ad2d0c7 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -626,6 +626,52 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -1013,6 +1059,49 @@ ufs_mem_phy_lanes: lanes@1d87400 { #clock-cells = <0>; }; }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; timer { From 27a0d0b846d9add93a65c25149aae14ec3f75524 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 16 Dec 2021 16:38:13 +0530 Subject: [PATCH 91/92] arm64: dts: qcom: sm8450-qrd: Enable USB nodes Enable the usb phy and usb controller in peripheral mode. This helps to get the adb working with the QRD board. Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211216110813.658384-2-vkoul@kernel.org --- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 4b7ad190d538..b68ab247e6ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -373,3 +373,26 @@ &ufs_mem_phy { vdda-max-microamp = <173000>; vdda-pll-max-microamp = <24900>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; From c23f1b77358c173a25ef21303d2a8cc893e9ce22 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 22 Dec 2021 09:08:13 -0600 Subject: [PATCH 92/92] arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX The SM6125_VDDCX constant is introduced through a separate branch and is not available in the dts branch. Temporarily replace the constant with it's value to avoid the build breakage. Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm6125.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index e81b2a7794fb..49e6bca646c2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -449,7 +449,7 @@ sdhc_1: sdhci@4744000 { <&xo_board>; clock-names = "iface", "core", "xo"; - power-domains = <&rpmpd SM6125_VDDCX>; + power-domains = <&rpmpd 0>; bus-width = <8>; non-removable; @@ -474,7 +474,7 @@ sdhc_2: sdhci@4784000 { pinctrl-1 = <&sdc2_state_off>; pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd SM6125_VDDCX>; + power-domains = <&rpmpd 0>; bus-width = <4>; status = "disabled";