dpll: add phase-offset-monitor feature to netlink spec

Add enum dpll_feature_state for control over features.

Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/driver-api/dpll.rst

@@ -214,6 +214,24 @@ offset values are fractional with 3-digit decimal places and shell be
 divided with ``DPLL_PIN_PHASE_OFFSET_DIVIDER`` to get integer part and
 modulo divided to get fractional part.
 
+Phase offset monitor
+====================
+
+Phase offset measurement is typically performed against the current active
+source. However, some DPLL (Digital Phase-Locked Loop) devices may offer
+the capability to monitor phase offsets across all available inputs.
+The attribute and current feature state shall be included in the response
+message of the ``DPLL_CMD_DEVICE_GET`` command for supported DPLL devices.
+In such cases, users can also control the feature using the
+``DPLL_CMD_DEVICE_SET`` command by setting the ``enum dpll_feature_state``
+values for the attribute.
+Once enabled the phase offset measurements for the input shall be returned
+in the ``DPLL_A_PIN_PHASE_OFFSET`` attribute.
+
+  =============================== ========================
+  ``DPLL_A_PHASE_OFFSET_MONITOR`` attr state of a feature
+  =============================== ========================
+
 Embedded SYNC
 =============
 

Documentation/netlink/specs/dpll.yaml

@@ -240,6 +240,20 @@ definitions:
       integer part of a measured phase offset value.
       Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
       fractional part of a measured phase offset value.
+  -
+    type: enum
+    name: feature-state
+    doc: |
+      Allow control (enable/disable) and status checking over features.
+    entries:
+      -
+        name: disable
+        doc: |
+          feature shall be disabled
+      -
+        name: enable
+        doc: |
+          feature shall be enabled
 
 attribute-sets:
   -
@@ -293,6 +307,14 @@ attribute-sets:
           be put to message multiple times to indicate possible parallel
           quality levels (e.g. one specified by ITU option 1 and another
           one specified by option 2).
+      -
+        name: phase-offset-monitor
+        type: u32
+        enum: feature-state
+        doc: Receive or request state of phase offset monitor feature.
+          If enabled, dpll device shall monitor and notify all currently
+          available inputs for changes of their phase offset against the
+          dpll device.
   -
     name: pin
     enum-name: dpll_a_pin
@@ -483,6 +505,7 @@ operations:
             - temp
             - clock-id
             - type
+            - phase-offset-monitor
 
       dump:
         reply: *dev-attrs
@@ -499,6 +522,7 @@ operations:
         request:
           attributes:
             - id
+            - phase-offset-monitor
     -
       name: device-create-ntf
       doc: Notification about device appearing

drivers/dpll/dpll_nl.c

@@ -37,8 +37,9 @@ static const struct nla_policy dpll_device_get_nl_policy[DPLL_A_ID + 1] = {
 };
 
 /* DPLL_CMD_DEVICE_SET - do */
-static const struct nla_policy dpll_device_set_nl_policy[DPLL_A_ID + 1] = {
+static const struct nla_policy dpll_device_set_nl_policy[DPLL_A_PHASE_OFFSET_MONITOR + 1] = {
 	[DPLL_A_ID] = { .type = NLA_U32, },
+	[DPLL_A_PHASE_OFFSET_MONITOR] = NLA_POLICY_MAX(NLA_U32, 1),
 };
 
 /* DPLL_CMD_PIN_ID_GET - do */
@@ -105,7 +106,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
 		.doit		= dpll_nl_device_set_doit,
 		.post_doit	= dpll_post_doit,
 		.policy		= dpll_device_set_nl_policy,
-		.maxattr	= DPLL_A_ID,
+		.maxattr	= DPLL_A_PHASE_OFFSET_MONITOR,
 		.flags		= GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
 	},
 	{

include/uapi/linux/dpll.h

@@ -192,6 +192,17 @@ enum dpll_pin_capabilities {
 
 #define DPLL_PHASE_OFFSET_DIVIDER	1000
 
+/**
+ * enum dpll_feature_state - Allow control (enable/disable) and status checking
+ *   over features.
+ * @DPLL_FEATURE_STATE_DISABLE: feature shall be disabled
+ * @DPLL_FEATURE_STATE_ENABLE: feature shall be enabled
+ */
+enum dpll_feature_state {
+	DPLL_FEATURE_STATE_DISABLE,
+	DPLL_FEATURE_STATE_ENABLE,
+};
+
 enum dpll_a {
 	DPLL_A_ID = 1,
 	DPLL_A_MODULE_NAME,
@@ -204,6 +215,7 @@ enum dpll_a {
 	DPLL_A_TYPE,
 	DPLL_A_LOCK_STATUS_ERROR,
 	DPLL_A_CLOCK_QUALITY_LEVEL,
+	DPLL_A_PHASE_OFFSET_MONITOR,
 
 	__DPLL_A_MAX,
 	DPLL_A_MAX = (__DPLL_A_MAX - 1)