diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index 809d0e9d0a15..929f6f8e4534 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -104,6 +104,20 @@ patternProperties:
             description:
               Configure the RMII reference clock to be a clock output
               rather than an input. Only applicable for RMII mode.
+          tx-internal-delay-ps:
+            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
+            description:
+              RGMII TX Clock Delay defined in pico seconds.
+              The delay lines adjust the MII clock vs. data timing.
+              If this property is not present the delay is determined by
+              the interface mode.
+          rx-internal-delay-ps:
+            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
+            description:
+              RGMII RX Clock Delay defined in pico seconds.
+              The delay lines adjust the MII clock vs. data timing.
+              If this property is not present the delay is determined by
+              the interface mode.
 
 required:
   - compatible
@@ -127,8 +141,10 @@ examples:
                     port@0 {
                             reg = <0>;
                             label = "lan3";
-                            phy-mode = "rgmii";
+                            phy-mode = "rgmii-id";
                             phy-handle = <&phy0>;
+                            tx-internal-delay-ps = <2000>;
+                            rx-internal-delay-ps = <2000>;
                     };
 
                     port@1 {