From 8bd137d4c009d0aa214b839100f905e0c2f8bd14 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:54 +0200 Subject: [PATCH 01/14] dt/bindings: Document pinctrl-ingenic This commit adds documentation for the devicetree bindings of the pinctrl-ingenic driver, which handles pin configuration and pin muxing of the Ingenic SoCs currently supported by the Linux kernel. Signed-off-by: Paul Cercueil Acked-by: Rob Herring Signed-off-by: Linus Walleij --- .../bindings/pinctrl/ingenic,pinctrl.txt | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt new file mode 100644 index 000000000000..ca313a7aeaff --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -0,0 +1,41 @@ +Ingenic jz47xx pin controller + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may +be used as GPIOs, multiplexed device functions are configured within the +GPIO port configuration registers and it is typical to refer to pins using the +naming scheme "PxN" where x is a character identifying the GPIO port with +which the pin is associated and N is an integer from 0 to 31 identifying the +pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and +PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to +PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a +total of 192 pins. + + +Required properties: +-------------------- + + - compatible: One of: + - "ingenic,jz4740-pinctrl" + - "ingenic,jz4770-pinctrl" + - "ingenic,jz4780-pinctrl" + - reg: Address range of the pinctrl registers. + + +GPIO sub-nodes +-------------- + +The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver; +please refer to ../gpio/ingenic,gpio.txt. + + +Example: +-------- + +pinctrl: pin-controller@10010000 { + compatible = "ingenic,jz4740-pinctrl"; + reg = <0x10010000 0x400>; +}; From 592870e6ed7dd3491092b3124b17091bf65a1592 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:55 +0200 Subject: [PATCH 02/14] dt/bindings: Document gpio-ingenic This commit adds documentation for the devicetree bindings of the gpio-ingenic driver, which handles GPIOs of the Ingenic SoCs currently supported by the Linux kernel. Signed-off-by: Paul Cercueil Acked-by: Rob Herring Signed-off-by: Linus Walleij --- .../devicetree/bindings/gpio/ingenic,gpio.txt | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt new file mode 100644 index 000000000000..7988aeb725f4 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt @@ -0,0 +1,46 @@ +Ingenic jz47xx GPIO controller + +That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl +driver node. + +Required properties: +-------------------- + + - compatible: Must contain one of: + - "ingenic,jz4740-gpio" + - "ingenic,jz4770-gpio" + - "ingenic,jz4780-gpio" + - reg: The GPIO bank number. + - interrupt-controller: Marks the device node as an interrupt controller. + - interrupts: Interrupt specifier for the controllers interrupt. + - #interrupt-cells: Should be 2. Refer to + ../interrupt-controller/interrupts.txt for more details. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. Refer to + 'gpio.txt' in this directory for more details. + +Example: +-------- + +&pinctrl { + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4740-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <28>; + }; +}; From b5c23aa4653796d41aea43c3706e9129820c0b9a Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:56 +0200 Subject: [PATCH 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs This driver handles pin configuration and pin muxing for the JZ4740 and JZ4780 SoCs from Ingenic. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 9 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ingenic.c | 852 ++++++++++++++++++++++++++++++ 3 files changed, 862 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-ingenic.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 37af5e3029d5..2eac737b73a3 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -296,6 +296,15 @@ config PINCTRL_ZYNQ help This selects the pinctrl driver for Xilinx Zynq. +config PINCTRL_INGENIC + bool "Pinctrl driver for the Ingenic JZ47xx SoCs" + default y + depends on MACH_INGENIC || COMPILE_TEST + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select REGMAP_MMIO + source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" source "drivers/pinctrl/berlin/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 0e9b2226a7c2..bdf7ba9f676f 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o +obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-y += bcm/ diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c new file mode 100644 index 000000000000..d8473d929cb1 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -0,0 +1,852 @@ +/* + * Ingenic SoCs pinctrl driver + * + * Copyright (c) 2017 Paul Cercueil + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinconf.h" +#include "pinmux.h" + +#define JZ4740_GPIO_DATA 0x10 +#define JZ4740_GPIO_PULL_DIS 0x30 +#define JZ4740_GPIO_FUNC 0x40 +#define JZ4740_GPIO_SELECT 0x50 +#define JZ4740_GPIO_DIR 0x60 +#define JZ4740_GPIO_TRIG 0x70 +#define JZ4740_GPIO_FLAG 0x80 + +#define JZ4770_GPIO_INT 0x10 +#define JZ4770_GPIO_MSK 0x20 +#define JZ4770_GPIO_PAT1 0x30 +#define JZ4770_GPIO_PAT0 0x40 +#define JZ4770_GPIO_FLAG 0x50 +#define JZ4770_GPIO_PEN 0x70 + +#define REG_SET(x) ((x) + 0x4) +#define REG_CLEAR(x) ((x) + 0x8) + +#define PINS_PER_GPIO_CHIP 32 + +enum jz_version { + ID_JZ4740, + ID_JZ4770, + ID_JZ4780, +}; + +struct ingenic_chip_info { + unsigned int num_chips; + + const struct group_desc *groups; + unsigned int num_groups; + + const struct function_desc *functions; + unsigned int num_functions; + + const u32 *pull_ups, *pull_downs; +}; + +struct ingenic_pinctrl { + struct device *dev; + struct regmap *map; + struct pinctrl_dev *pctl; + struct pinctrl_pin_desc *pdesc; + enum jz_version version; + + const struct ingenic_chip_info *info; +}; + +static const u32 jz4740_pull_ups[4] = { + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, +}; + +static const u32 jz4740_pull_downs[4] = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, +}; + +static int jz4740_mmc_1bit_pins[] = { 0x69, 0x68, 0x6a, }; +static int jz4740_mmc_4bit_pins[] = { 0x6b, 0x6c, 0x6d, }; +static int jz4740_uart0_data_pins[] = { 0x7a, 0x79, }; +static int jz4740_uart0_hwflow_pins[] = { 0x7e, 0x7f, }; +static int jz4740_uart1_data_pins[] = { 0x7e, 0x7f, }; +static int jz4740_lcd_8bit_pins[] = { + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x52, 0x53, 0x54, +}; +static int jz4740_lcd_16bit_pins[] = { + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x55, +}; +static int jz4740_lcd_18bit_pins[] = { 0x50, 0x51, }; +static int jz4740_lcd_18bit_tft_pins[] = { 0x56, 0x57, 0x31, 0x32, }; +static int jz4740_nand_cs1_pins[] = { 0x39, }; +static int jz4740_nand_cs2_pins[] = { 0x3a, }; +static int jz4740_nand_cs3_pins[] = { 0x3b, }; +static int jz4740_nand_cs4_pins[] = { 0x3c, }; +static int jz4740_pwm_pwm0_pins[] = { 0x77, }; +static int jz4740_pwm_pwm1_pins[] = { 0x78, }; +static int jz4740_pwm_pwm2_pins[] = { 0x79, }; +static int jz4740_pwm_pwm3_pins[] = { 0x7a, }; +static int jz4740_pwm_pwm4_pins[] = { 0x7b, }; +static int jz4740_pwm_pwm5_pins[] = { 0x7c, }; +static int jz4740_pwm_pwm6_pins[] = { 0x7e, }; +static int jz4740_pwm_pwm7_pins[] = { 0x7f, }; + +static int jz4740_mmc_1bit_funcs[] = { 0, 0, 0, }; +static int jz4740_mmc_4bit_funcs[] = { 0, 0, 0, }; +static int jz4740_uart0_data_funcs[] = { 1, 1, }; +static int jz4740_uart0_hwflow_funcs[] = { 1, 1, }; +static int jz4740_uart1_data_funcs[] = { 2, 2, }; +static int jz4740_lcd_8bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; +static int jz4740_lcd_16bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, }; +static int jz4740_lcd_18bit_funcs[] = { 0, 0, }; +static int jz4740_lcd_18bit_tft_funcs[] = { 0, 0, 0, 0, }; +static int jz4740_nand_cs1_funcs[] = { 0, }; +static int jz4740_nand_cs2_funcs[] = { 0, }; +static int jz4740_nand_cs3_funcs[] = { 0, }; +static int jz4740_nand_cs4_funcs[] = { 0, }; +static int jz4740_pwm_pwm0_funcs[] = { 0, }; +static int jz4740_pwm_pwm1_funcs[] = { 0, }; +static int jz4740_pwm_pwm2_funcs[] = { 0, }; +static int jz4740_pwm_pwm3_funcs[] = { 0, }; +static int jz4740_pwm_pwm4_funcs[] = { 0, }; +static int jz4740_pwm_pwm5_funcs[] = { 0, }; +static int jz4740_pwm_pwm6_funcs[] = { 0, }; +static int jz4740_pwm_pwm7_funcs[] = { 0, }; + +#define INGENIC_PIN_GROUP(name, id) \ + { \ + name, \ + id##_pins, \ + ARRAY_SIZE(id##_pins), \ + id##_funcs, \ + } + +static const struct group_desc jz4740_groups[] = { + INGENIC_PIN_GROUP("mmc-1bit", jz4740_mmc_1bit), + INGENIC_PIN_GROUP("mmc-4bit", jz4740_mmc_4bit), + INGENIC_PIN_GROUP("uart0-data", jz4740_uart0_data), + INGENIC_PIN_GROUP("uart0-hwflow", jz4740_uart0_hwflow), + INGENIC_PIN_GROUP("uart1-data", jz4740_uart1_data), + INGENIC_PIN_GROUP("lcd-8bit", jz4740_lcd_8bit), + INGENIC_PIN_GROUP("lcd-16bit", jz4740_lcd_16bit), + INGENIC_PIN_GROUP("lcd-18bit", jz4740_lcd_18bit), + INGENIC_PIN_GROUP("lcd-18bit-tft", jz4740_lcd_18bit_tft), + { "lcd-no-pins", }, + INGENIC_PIN_GROUP("nand-cs1", jz4740_nand_cs1), + INGENIC_PIN_GROUP("nand-cs2", jz4740_nand_cs2), + INGENIC_PIN_GROUP("nand-cs3", jz4740_nand_cs3), + INGENIC_PIN_GROUP("nand-cs4", jz4740_nand_cs4), + INGENIC_PIN_GROUP("pwm0", jz4740_pwm_pwm0), + INGENIC_PIN_GROUP("pwm1", jz4740_pwm_pwm1), + INGENIC_PIN_GROUP("pwm2", jz4740_pwm_pwm2), + INGENIC_PIN_GROUP("pwm3", jz4740_pwm_pwm3), + INGENIC_PIN_GROUP("pwm4", jz4740_pwm_pwm4), + INGENIC_PIN_GROUP("pwm5", jz4740_pwm_pwm5), + INGENIC_PIN_GROUP("pwm6", jz4740_pwm_pwm6), + INGENIC_PIN_GROUP("pwm7", jz4740_pwm_pwm7), +}; + +static const char *jz4740_mmc_groups[] = { "mmc-1bit", "mmc-4bit", }; +static const char *jz4740_uart0_groups[] = { "uart0-data", "uart0-hwflow", }; +static const char *jz4740_uart1_groups[] = { "uart1-data", }; +static const char *jz4740_lcd_groups[] = { + "lcd-8bit", "lcd-16bit", "lcd-18bit", "lcd-18bit-tft", "lcd-no-pins", +}; +static const char *jz4740_nand_groups[] = { + "nand-cs1", "nand-cs2", "nand-cs3", "nand-cs4", +}; +static const char *jz4740_pwm0_groups[] = { "pwm0", }; +static const char *jz4740_pwm1_groups[] = { "pwm1", }; +static const char *jz4740_pwm2_groups[] = { "pwm2", }; +static const char *jz4740_pwm3_groups[] = { "pwm3", }; +static const char *jz4740_pwm4_groups[] = { "pwm4", }; +static const char *jz4740_pwm5_groups[] = { "pwm5", }; +static const char *jz4740_pwm6_groups[] = { "pwm6", }; +static const char *jz4740_pwm7_groups[] = { "pwm7", }; + +static const struct function_desc jz4740_functions[] = { + { "mmc", jz4740_mmc_groups, ARRAY_SIZE(jz4740_mmc_groups), }, + { "uart0", jz4740_uart0_groups, ARRAY_SIZE(jz4740_uart0_groups), }, + { "uart1", jz4740_uart1_groups, ARRAY_SIZE(jz4740_uart1_groups), }, + { "lcd", jz4740_lcd_groups, ARRAY_SIZE(jz4740_lcd_groups), }, + { "nand", jz4740_nand_groups, ARRAY_SIZE(jz4740_nand_groups), }, + { "pwm0", jz4740_pwm0_groups, ARRAY_SIZE(jz4740_pwm0_groups), }, + { "pwm1", jz4740_pwm1_groups, ARRAY_SIZE(jz4740_pwm1_groups), }, + { "pwm2", jz4740_pwm2_groups, ARRAY_SIZE(jz4740_pwm2_groups), }, + { "pwm3", jz4740_pwm3_groups, ARRAY_SIZE(jz4740_pwm3_groups), }, + { "pwm4", jz4740_pwm4_groups, ARRAY_SIZE(jz4740_pwm4_groups), }, + { "pwm5", jz4740_pwm5_groups, ARRAY_SIZE(jz4740_pwm5_groups), }, + { "pwm6", jz4740_pwm6_groups, ARRAY_SIZE(jz4740_pwm6_groups), }, + { "pwm7", jz4740_pwm7_groups, ARRAY_SIZE(jz4740_pwm7_groups), }, +}; + +static const struct ingenic_chip_info jz4740_chip_info = { + .num_chips = 4, + .groups = jz4740_groups, + .num_groups = ARRAY_SIZE(jz4740_groups), + .functions = jz4740_functions, + .num_functions = ARRAY_SIZE(jz4740_functions), + .pull_ups = jz4740_pull_ups, + .pull_downs = jz4740_pull_downs, +}; + +static const u32 jz4770_pull_ups[6] = { + 0x3fffffff, 0xfff0030c, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0xffa7f00f, +}; + +static const u32 jz4770_pull_downs[6] = { + 0x00000000, 0x000f0c03, 0x00000000, 0x0000b000, 0x00000483, 0x00580ff0, +}; + +static int jz4770_uart0_data_pins[] = { 0xa0, 0xa3, }; +static int jz4770_uart0_hwflow_pins[] = { 0xa1, 0xa2, }; +static int jz4770_uart1_data_pins[] = { 0x7a, 0x7c, }; +static int jz4770_uart1_hwflow_pins[] = { 0x7b, 0x7d, }; +static int jz4770_uart2_data_pins[] = { 0x66, 0x67, }; +static int jz4770_uart2_hwflow_pins[] = { 0x65, 0x64, }; +static int jz4770_uart3_data_pins[] = { 0x6c, 0x85, }; +static int jz4770_uart3_hwflow_pins[] = { 0x88, 0x89, }; +static int jz4770_uart4_data_pins[] = { 0x54, 0x4a, }; +static int jz4770_mmc0_8bit_a_pins[] = { 0x04, 0x05, 0x06, 0x07, 0x18, }; +static int jz4770_mmc0_4bit_a_pins[] = { 0x15, 0x16, 0x17, }; +static int jz4770_mmc0_1bit_a_pins[] = { 0x12, 0x13, 0x14, }; +static int jz4770_mmc0_4bit_e_pins[] = { 0x95, 0x96, 0x97, }; +static int jz4770_mmc0_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, }; +static int jz4770_mmc1_4bit_d_pins[] = { 0x75, 0x76, 0x77, }; +static int jz4770_mmc1_1bit_d_pins[] = { 0x78, 0x79, 0x74, }; +static int jz4770_mmc1_4bit_e_pins[] = { 0x95, 0x96, 0x97, }; +static int jz4770_mmc1_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, }; +static int jz4770_nemc_data_pins[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, +}; +static int jz4770_nemc_cle_ale_pins[] = { 0x20, 0x21, }; +static int jz4770_nemc_addr_pins[] = { 0x22, 0x23, 0x24, 0x25, }; +static int jz4770_nemc_rd_we_pins[] = { 0x10, 0x11, }; +static int jz4770_nemc_frd_fwe_pins[] = { 0x12, 0x13, }; +static int jz4770_nemc_cs1_pins[] = { 0x15, }; +static int jz4770_nemc_cs2_pins[] = { 0x16, }; +static int jz4770_nemc_cs3_pins[] = { 0x17, }; +static int jz4770_nemc_cs4_pins[] = { 0x18, }; +static int jz4770_nemc_cs5_pins[] = { 0x19, }; +static int jz4770_nemc_cs6_pins[] = { 0x1a, }; +static int jz4770_i2c0_pins[] = { 0x6e, 0x6f, }; +static int jz4770_i2c1_pins[] = { 0x8e, 0x8f, }; +static int jz4770_i2c2_pins[] = { 0xb0, 0xb1, }; +static int jz4770_i2c3_pins[] = { 0x6a, 0x6b, }; +static int jz4770_i2c4_e_pins[] = { 0x8c, 0x8d, }; +static int jz4770_i2c4_f_pins[] = { 0xb9, 0xb8, }; +static int jz4770_cim_pins[] = { + 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, +}; +static int jz4770_lcd_32bit_pins[] = { + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x51, +}; +static int jz4770_pwm_pwm0_pins[] = { 0x80, }; +static int jz4770_pwm_pwm1_pins[] = { 0x81, }; +static int jz4770_pwm_pwm2_pins[] = { 0x82, }; +static int jz4770_pwm_pwm3_pins[] = { 0x83, }; +static int jz4770_pwm_pwm4_pins[] = { 0x84, }; +static int jz4770_pwm_pwm5_pins[] = { 0x85, }; +static int jz4770_pwm_pwm6_pins[] = { 0x6a, }; +static int jz4770_pwm_pwm7_pins[] = { 0x6b, }; + +static int jz4770_uart0_data_funcs[] = { 0, 0, }; +static int jz4770_uart0_hwflow_funcs[] = { 0, 0, }; +static int jz4770_uart1_data_funcs[] = { 0, 0, }; +static int jz4770_uart1_hwflow_funcs[] = { 0, 0, }; +static int jz4770_uart2_data_funcs[] = { 1, 1, }; +static int jz4770_uart2_hwflow_funcs[] = { 1, 1, }; +static int jz4770_uart3_data_funcs[] = { 0, 1, }; +static int jz4770_uart3_hwflow_funcs[] = { 0, 0, }; +static int jz4770_uart4_data_funcs[] = { 2, 2, }; +static int jz4770_mmc0_8bit_a_funcs[] = { 1, 1, 1, 1, 1, }; +static int jz4770_mmc0_4bit_a_funcs[] = { 1, 1, 1, }; +static int jz4770_mmc0_1bit_a_funcs[] = { 1, 1, 0, }; +static int jz4770_mmc0_4bit_e_funcs[] = { 0, 0, 0, }; +static int jz4770_mmc0_1bit_e_funcs[] = { 0, 0, 0, }; +static int jz4770_mmc1_4bit_d_funcs[] = { 0, 0, 0, }; +static int jz4770_mmc1_1bit_d_funcs[] = { 0, 0, 0, }; +static int jz4770_mmc1_4bit_e_funcs[] = { 1, 1, 1, }; +static int jz4770_mmc1_1bit_e_funcs[] = { 1, 1, 1, }; +static int jz4770_nemc_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, }; +static int jz4770_nemc_cle_ale_funcs[] = { 0, 0, }; +static int jz4770_nemc_addr_funcs[] = { 0, 0, 0, 0, }; +static int jz4770_nemc_rd_we_funcs[] = { 0, 0, }; +static int jz4770_nemc_frd_fwe_funcs[] = { 0, 0, }; +static int jz4770_nemc_cs1_funcs[] = { 0, }; +static int jz4770_nemc_cs2_funcs[] = { 0, }; +static int jz4770_nemc_cs3_funcs[] = { 0, }; +static int jz4770_nemc_cs4_funcs[] = { 0, }; +static int jz4770_nemc_cs5_funcs[] = { 0, }; +static int jz4770_nemc_cs6_funcs[] = { 0, }; +static int jz4770_i2c0_funcs[] = { 0, 0, }; +static int jz4770_i2c1_funcs[] = { 0, 0, }; +static int jz4770_i2c2_funcs[] = { 2, 2, }; +static int jz4770_i2c3_funcs[] = { 1, 1, }; +static int jz4770_i2c4_e_funcs[] = { 1, 1, }; +static int jz4770_i2c4_f_funcs[] = { 1, 1, }; +static int jz4770_cim_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; +static int jz4770_lcd_32bit_funcs[] = { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, +}; +static int jz4770_pwm_pwm0_funcs[] = { 0, }; +static int jz4770_pwm_pwm1_funcs[] = { 0, }; +static int jz4770_pwm_pwm2_funcs[] = { 0, }; +static int jz4770_pwm_pwm3_funcs[] = { 0, }; +static int jz4770_pwm_pwm4_funcs[] = { 0, }; +static int jz4770_pwm_pwm5_funcs[] = { 0, }; +static int jz4770_pwm_pwm6_funcs[] = { 0, }; +static int jz4770_pwm_pwm7_funcs[] = { 0, }; + +static const struct group_desc jz4770_groups[] = { + INGENIC_PIN_GROUP("uart0-data", jz4770_uart0_data), + INGENIC_PIN_GROUP("uart0-hwflow", jz4770_uart0_hwflow), + INGENIC_PIN_GROUP("uart1-data", jz4770_uart1_data), + INGENIC_PIN_GROUP("uart1-hwflow", jz4770_uart1_hwflow), + INGENIC_PIN_GROUP("uart2-data", jz4770_uart2_data), + INGENIC_PIN_GROUP("uart2-hwflow", jz4770_uart2_hwflow), + INGENIC_PIN_GROUP("uart3-data", jz4770_uart3_data), + INGENIC_PIN_GROUP("uart3-hwflow", jz4770_uart3_hwflow), + INGENIC_PIN_GROUP("uart4-data", jz4770_uart4_data), + INGENIC_PIN_GROUP("mmc0-8bit-a", jz4770_mmc0_8bit_a), + INGENIC_PIN_GROUP("mmc0-4bit-a", jz4770_mmc0_4bit_a), + INGENIC_PIN_GROUP("mmc0-1bit-a", jz4770_mmc0_1bit_a), + INGENIC_PIN_GROUP("mmc0-4bit-e", jz4770_mmc0_4bit_e), + INGENIC_PIN_GROUP("mmc0-1bit-e", jz4770_mmc0_1bit_e), + INGENIC_PIN_GROUP("mmc1-4bit-d", jz4770_mmc1_4bit_d), + INGENIC_PIN_GROUP("mmc1-1bit-d", jz4770_mmc1_1bit_d), + INGENIC_PIN_GROUP("mmc1-4bit-e", jz4770_mmc1_4bit_e), + INGENIC_PIN_GROUP("mmc1-1bit-e", jz4770_mmc1_1bit_e), + INGENIC_PIN_GROUP("nemc-data", jz4770_nemc_data), + INGENIC_PIN_GROUP("nemc-cle-ale", jz4770_nemc_cle_ale), + INGENIC_PIN_GROUP("nemc-addr", jz4770_nemc_addr), + INGENIC_PIN_GROUP("nemc-rd-we", jz4770_nemc_rd_we), + INGENIC_PIN_GROUP("nemc-frd-fwe", jz4770_nemc_frd_fwe), + INGENIC_PIN_GROUP("nemc-cs1", jz4770_nemc_cs1), + INGENIC_PIN_GROUP("nemc-cs2", jz4770_nemc_cs2), + INGENIC_PIN_GROUP("nemc-cs3", jz4770_nemc_cs3), + INGENIC_PIN_GROUP("nemc-cs4", jz4770_nemc_cs4), + INGENIC_PIN_GROUP("nemc-cs5", jz4770_nemc_cs5), + INGENIC_PIN_GROUP("nemc-cs6", jz4770_nemc_cs6), + INGENIC_PIN_GROUP("i2c0-data", jz4770_i2c0), + INGENIC_PIN_GROUP("i2c1-data", jz4770_i2c1), + INGENIC_PIN_GROUP("i2c2-data", jz4770_i2c2), + INGENIC_PIN_GROUP("i2c3-data", jz4770_i2c3), + INGENIC_PIN_GROUP("i2c4-data-e", jz4770_i2c4_e), + INGENIC_PIN_GROUP("i2c4-data-f", jz4770_i2c4_f), + INGENIC_PIN_GROUP("cim-data", jz4770_cim), + INGENIC_PIN_GROUP("lcd-32bit", jz4770_lcd_32bit), + { "lcd-no-pins", }, + INGENIC_PIN_GROUP("pwm0", jz4770_pwm_pwm0), + INGENIC_PIN_GROUP("pwm1", jz4770_pwm_pwm1), + INGENIC_PIN_GROUP("pwm2", jz4770_pwm_pwm2), + INGENIC_PIN_GROUP("pwm3", jz4770_pwm_pwm3), + INGENIC_PIN_GROUP("pwm4", jz4770_pwm_pwm4), + INGENIC_PIN_GROUP("pwm5", jz4770_pwm_pwm5), + INGENIC_PIN_GROUP("pwm6", jz4770_pwm_pwm6), + INGENIC_PIN_GROUP("pwm7", jz4770_pwm_pwm7), +}; + +static const char *jz4770_uart0_groups[] = { "uart0-data", "uart0-hwflow", }; +static const char *jz4770_uart1_groups[] = { "uart1-data", "uart1-hwflow", }; +static const char *jz4770_uart2_groups[] = { "uart2-data", "uart2-hwflow", }; +static const char *jz4770_uart3_groups[] = { "uart3-data", "uart3-hwflow", }; +static const char *jz4770_uart4_groups[] = { "uart4-data", }; +static const char *jz4770_mmc0_groups[] = { + "mmc0-8bit-a", "mmc0-4bit-a", "mmc0-1bit-a", + "mmc0-1bit-e", "mmc0-4bit-e", +}; +static const char *jz4770_mmc1_groups[] = { + "mmc1-1bit-d", "mmc1-4bit-d", "mmc1-1bit-e", "mmc1-4bit-e", +}; +static const char *jz4770_nemc_groups[] = { + "nemc-data", "nemc-cle-ale", "nemc-addr", "nemc-rd-we", "nemc-frd-fwe", +}; +static const char *jz4770_cs1_groups[] = { "nemc-cs1", }; +static const char *jz4770_cs6_groups[] = { "nemc-cs6", }; +static const char *jz4770_i2c0_groups[] = { "i2c0-data", }; +static const char *jz4770_i2c1_groups[] = { "i2c1-data", }; +static const char *jz4770_i2c2_groups[] = { "i2c2-data", }; +static const char *jz4770_i2c3_groups[] = { "i2c3-data", }; +static const char *jz4770_i2c4_groups[] = { "i2c4-data-e", "i2c4-data-f", }; +static const char *jz4770_cim_groups[] = { "cim-data", }; +static const char *jz4770_lcd_groups[] = { "lcd-32bit", "lcd-no-pins", }; +static const char *jz4770_pwm0_groups[] = { "pwm0", }; +static const char *jz4770_pwm1_groups[] = { "pwm1", }; +static const char *jz4770_pwm2_groups[] = { "pwm2", }; +static const char *jz4770_pwm3_groups[] = { "pwm3", }; +static const char *jz4770_pwm4_groups[] = { "pwm4", }; +static const char *jz4770_pwm5_groups[] = { "pwm5", }; +static const char *jz4770_pwm6_groups[] = { "pwm6", }; +static const char *jz4770_pwm7_groups[] = { "pwm7", }; + +static const struct function_desc jz4770_functions[] = { + { "uart0", jz4770_uart0_groups, ARRAY_SIZE(jz4770_uart0_groups), }, + { "uart1", jz4770_uart1_groups, ARRAY_SIZE(jz4770_uart1_groups), }, + { "uart2", jz4770_uart2_groups, ARRAY_SIZE(jz4770_uart2_groups), }, + { "uart3", jz4770_uart3_groups, ARRAY_SIZE(jz4770_uart3_groups), }, + { "uart4", jz4770_uart4_groups, ARRAY_SIZE(jz4770_uart4_groups), }, + { "mmc0", jz4770_mmc0_groups, ARRAY_SIZE(jz4770_mmc0_groups), }, + { "mmc1", jz4770_mmc1_groups, ARRAY_SIZE(jz4770_mmc1_groups), }, + { "nemc", jz4770_nemc_groups, ARRAY_SIZE(jz4770_nemc_groups), }, + { "nemc-cs1", jz4770_cs1_groups, ARRAY_SIZE(jz4770_cs1_groups), }, + { "nemc-cs6", jz4770_cs6_groups, ARRAY_SIZE(jz4770_cs6_groups), }, + { "i2c0", jz4770_i2c0_groups, ARRAY_SIZE(jz4770_i2c0_groups), }, + { "i2c1", jz4770_i2c1_groups, ARRAY_SIZE(jz4770_i2c1_groups), }, + { "i2c2", jz4770_i2c2_groups, ARRAY_SIZE(jz4770_i2c2_groups), }, + { "i2c3", jz4770_i2c3_groups, ARRAY_SIZE(jz4770_i2c3_groups), }, + { "i2c4", jz4770_i2c4_groups, ARRAY_SIZE(jz4770_i2c4_groups), }, + { "cim", jz4770_cim_groups, ARRAY_SIZE(jz4770_cim_groups), }, + { "lcd", jz4770_lcd_groups, ARRAY_SIZE(jz4770_lcd_groups), }, + { "pwm0", jz4770_pwm0_groups, ARRAY_SIZE(jz4770_pwm0_groups), }, + { "pwm1", jz4770_pwm1_groups, ARRAY_SIZE(jz4770_pwm1_groups), }, + { "pwm2", jz4770_pwm2_groups, ARRAY_SIZE(jz4770_pwm2_groups), }, + { "pwm3", jz4770_pwm3_groups, ARRAY_SIZE(jz4770_pwm3_groups), }, + { "pwm4", jz4770_pwm4_groups, ARRAY_SIZE(jz4770_pwm4_groups), }, + { "pwm5", jz4770_pwm5_groups, ARRAY_SIZE(jz4770_pwm5_groups), }, + { "pwm6", jz4770_pwm6_groups, ARRAY_SIZE(jz4770_pwm6_groups), }, + { "pwm7", jz4770_pwm7_groups, ARRAY_SIZE(jz4770_pwm7_groups), }, +}; + +static const struct ingenic_chip_info jz4770_chip_info = { + .num_chips = 6, + .groups = jz4770_groups, + .num_groups = ARRAY_SIZE(jz4770_groups), + .functions = jz4770_functions, + .num_functions = ARRAY_SIZE(jz4770_functions), + .pull_ups = jz4770_pull_ups, + .pull_downs = jz4770_pull_downs, +}; + +static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc, + unsigned int pin, u8 reg, bool set) +{ + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + + regmap_write(jzpc->map, offt * 0x100 + + (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx)); +} + +static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc, + unsigned int pin, u8 reg) +{ + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + unsigned int val; + + regmap_read(jzpc->map, offt * 0x100 + reg, &val); + + return val & BIT(idx); +} + +static struct pinctrl_ops ingenic_pctlops = { + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc, + int pin, int func) +{ + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + + dev_dbg(jzpc->dev, "set pin P%c%u to function %u\n", + 'A' + offt, idx, func); + + if (jzpc->version >= ID_JZ4770) { + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, false); + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2); + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1); + } else { + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func > 0); + } + + return 0; +} + +static int ingenic_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned int selector, unsigned int group) +{ + struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev); + struct function_desc *func; + struct group_desc *grp; + unsigned int i; + + func = pinmux_generic_get_function(pctldev, selector); + if (!func) + return -EINVAL; + + grp = pinctrl_generic_get_group(pctldev, group); + if (!grp) + return -EINVAL; + + dev_dbg(pctldev->dev, "enable function %s group %s\n", + func->name, grp->name); + + for (i = 0; i < grp->num_pins; i++) { + int *pin_modes = grp->data; + + ingenic_pinmux_set_pin_fn(jzpc, grp->pins[i], pin_modes[i]); + } + + return 0; +} + +static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + + dev_dbg(pctldev->dev, "set pin P%c%u to %sput\n", + 'A' + offt, idx, input ? "in" : "out"); + + if (jzpc->version >= ID_JZ4770) { + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, true); + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); + } else { + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, input); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false); + } + + return 0; +} + +static struct pinmux_ops ingenic_pmxops = { + .get_functions_count = pinmux_generic_get_function_count, + .get_function_name = pinmux_generic_get_function_name, + .get_function_groups = pinmux_generic_get_function_groups, + .set_mux = ingenic_pinmux_set_mux, + .gpio_set_direction = ingenic_pinmux_gpio_set_direction, +}; + +static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + bool pull; + + if (jzpc->version >= ID_JZ4770) + pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN); + else + pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (pull) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (!pull || !(jzpc->info->pull_ups[offt] & BIT(idx))) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (!pull || !(jzpc->info->pull_downs[offt] & BIT(idx))) + return -EINVAL; + break; + + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, 1); + return 0; +} + +static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, + unsigned int pin, bool enabled) +{ + if (jzpc->version >= ID_JZ4770) + ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !enabled); + else + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled); +} + +static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int num_configs) +{ + struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int idx = pin % PINS_PER_GPIO_CHIP; + unsigned int offt = pin / PINS_PER_GPIO_CHIP; + unsigned int cfg; + + for (cfg = 0; cfg < num_configs; cfg++) { + switch (pinconf_to_config_param(configs[cfg])) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + continue; + default: + return -ENOTSUPP; + } + } + + for (cfg = 0; cfg < num_configs; cfg++) { + switch (pinconf_to_config_param(configs[cfg])) { + case PIN_CONFIG_BIAS_DISABLE: + dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n", + 'A' + offt, idx); + ingenic_set_bias(jzpc, pin, false); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (!(jzpc->info->pull_ups[offt] & BIT(idx))) + return -EINVAL; + dev_dbg(jzpc->dev, "set pull-up for pin P%c%u\n", + 'A' + offt, idx); + ingenic_set_bias(jzpc, pin, true); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (!(jzpc->info->pull_downs[offt] & BIT(idx))) + return -EINVAL; + dev_dbg(jzpc->dev, "set pull-down for pin P%c%u\n", + 'A' + offt, idx); + ingenic_set_bias(jzpc, pin, true); + break; + + default: + unreachable(); + } + } + + return 0; +} + +static int ingenic_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, unsigned long *config) +{ + const unsigned int *pins; + unsigned int i, npins, old = 0; + int ret; + + ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; i++) { + if (ingenic_pinconf_get(pctldev, pins[i], config)) + return -ENOTSUPP; + + /* configs do not match between two pins */ + if (i && (old != *config)) + return -ENOTSUPP; + + old = *config; + } + + return 0; +} + +static int ingenic_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int group, unsigned long *configs, + unsigned int num_configs) +{ + const unsigned int *pins; + unsigned int i, npins; + int ret; + + ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; i++) { + ret = ingenic_pinconf_set(pctldev, + pins[i], configs, num_configs); + if (ret) + return ret; + } + + return 0; +} + +static struct pinconf_ops ingenic_confops = { + .is_generic = true, + .pin_config_get = ingenic_pinconf_get, + .pin_config_set = ingenic_pinconf_set, + .pin_config_group_get = ingenic_pinconf_group_get, + .pin_config_group_set = ingenic_pinconf_group_set, +}; + +static const struct regmap_config ingenic_pinctrl_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static const struct of_device_id ingenic_pinctrl_of_match[] = { + { .compatible = "ingenic,jz4740-pinctrl", .data = (void *) ID_JZ4740 }, + { .compatible = "ingenic,jz4770-pinctrl", .data = (void *) ID_JZ4770 }, + { .compatible = "ingenic,jz4780-pinctrl", .data = (void *) ID_JZ4780 }, + {}, +}; + +int ingenic_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ingenic_pinctrl *jzpc; + struct pinctrl_desc *pctl_desc; + void __iomem *base; + const struct platform_device_id *id = platform_get_device_id(pdev); + const struct of_device_id *of_id = of_match_device( + ingenic_pinctrl_of_match, dev); + const struct ingenic_chip_info *chip_info; + unsigned int i; + int err; + + jzpc = devm_kzalloc(dev, sizeof(*jzpc), GFP_KERNEL); + if (!jzpc) + return -ENOMEM; + + base = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(base)) { + dev_err(dev, "Failed to ioremap registers\n"); + return PTR_ERR(base); + } + + jzpc->map = devm_regmap_init_mmio(dev, base, + &ingenic_pinctrl_regmap_config); + if (IS_ERR(jzpc->map)) { + dev_err(dev, "Failed to create regmap\n"); + return PTR_ERR(jzpc->map); + } + + jzpc->dev = dev; + + if (of_id) + jzpc->version = (enum jz_version)of_id->data; + else + jzpc->version = (enum jz_version)id->driver_data; + + if (jzpc->version >= ID_JZ4770) + chip_info = &jz4770_chip_info; + else + chip_info = &jz4740_chip_info; + jzpc->info = chip_info; + + pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL); + if (!pctl_desc) + return -ENOMEM; + + /* fill in pinctrl_desc structure */ + pctl_desc->name = dev_name(dev); + pctl_desc->owner = THIS_MODULE; + pctl_desc->pctlops = &ingenic_pctlops; + pctl_desc->pmxops = &ingenic_pmxops; + pctl_desc->confops = &ingenic_confops; + pctl_desc->npins = chip_info->num_chips * PINS_PER_GPIO_CHIP; + pctl_desc->pins = jzpc->pdesc = devm_kzalloc(&pdev->dev, + sizeof(*jzpc->pdesc) * pctl_desc->npins, GFP_KERNEL); + if (!jzpc->pdesc) + return -ENOMEM; + + for (i = 0; i < pctl_desc->npins; i++) { + jzpc->pdesc[i].number = i; + jzpc->pdesc[i].name = kasprintf(GFP_KERNEL, "P%c%d", + 'A' + (i / PINS_PER_GPIO_CHIP), + i % PINS_PER_GPIO_CHIP); + } + + jzpc->pctl = devm_pinctrl_register(dev, pctl_desc, jzpc); + if (!jzpc->pctl) { + dev_err(dev, "Failed to register pinctrl\n"); + return -EINVAL; + } + + for (i = 0; i < chip_info->num_groups; i++) { + const struct group_desc *group = &chip_info->groups[i]; + + err = pinctrl_generic_add_group(jzpc->pctl, group->name, + group->pins, group->num_pins, group->data); + if (err) { + dev_err(dev, "Failed to register group %s\n", + group->name); + return err; + } + } + + for (i = 0; i < chip_info->num_functions; i++) { + const struct function_desc *func = &chip_info->functions[i]; + + err = pinmux_generic_add_function(jzpc->pctl, func->name, + func->group_names, func->num_group_names, + func->data); + if (err) { + dev_err(dev, "Failed to register function %s\n", + func->name); + return err; + } + } + + dev_set_drvdata(dev, jzpc->map); + + if (dev->of_node) { + err = of_platform_populate(dev->of_node, NULL, NULL, dev); + if (err) { + dev_err(dev, "Failed to probe GPIO devices\n"); + return err; + } + } + + return 0; +} + +static const struct platform_device_id ingenic_pinctrl_ids[] = { + { "jz4740-pinctrl", ID_JZ4740 }, + { "jz4770-pinctrl", ID_JZ4770 }, + { "jz4780-pinctrl", ID_JZ4780 }, + {}, +}; + +static struct platform_driver ingenic_pinctrl_driver = { + .driver = { + .name = "pinctrl-ingenic", + .of_match_table = of_match_ptr(ingenic_pinctrl_of_match), + .suppress_bind_attrs = true, + }, + .probe = ingenic_pinctrl_probe, + .id_table = ingenic_pinctrl_ids, +}; + +static int __init ingenic_pinctrl_drv_register(void) +{ + return platform_driver_register(&ingenic_pinctrl_driver); +} +postcore_initcall(ingenic_pinctrl_drv_register); From b0653ce39a0d565cbb77c0f9a3f94ead2660927e Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:57 +0200 Subject: [PATCH 04/14] gpio: Add gpio-ingenic driver This driver handles the GPIOs of all the Ingenic JZ47xx SoCs currently supported by the upsteam Linux kernel. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 10 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ingenic.c | 394 ++++++++++++++++++++++++++++++++++++ 3 files changed, 405 insertions(+) create mode 100644 drivers/gpio/gpio-ingenic.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 23ca51ee6b28..45ed9acfd095 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -242,6 +242,16 @@ config GPIO_ICH If unsure, say N. +config GPIO_INGENIC + tristate "Ingenic JZ47xx SoCs GPIO support" + depends on MACH_INGENIC || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say yes here to support the GPIO functionality present on the + JZ4740 and JZ4780 SoCs from Ingenic. + + If unsure, say N. + config GPIO_IOP tristate "Intel IOP GPIO" depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 68b96277d9fa..d2939677b4fa 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o obj-$(CONFIG_GPIO_ICH) += gpio-ich.o +obj-$(CONFIG_GPIO_INGENIC) += gpio-ingenic.o obj-$(CONFIG_GPIO_IOP) += gpio-iop.o obj-$(CONFIG_GPIO_IT87) += gpio-it87.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c new file mode 100644 index 000000000000..254780730b95 --- /dev/null +++ b/drivers/gpio/gpio-ingenic.c @@ -0,0 +1,394 @@ +/* + * Ingenic JZ47xx GPIO driver + * + * Copyright (c) 2017 Paul Cercueil + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GPIO_PIN 0x00 +#define GPIO_MSK 0x20 + +#define JZ4740_GPIO_DATA 0x10 +#define JZ4740_GPIO_SELECT 0x50 +#define JZ4740_GPIO_DIR 0x60 +#define JZ4740_GPIO_TRIG 0x70 +#define JZ4740_GPIO_FLAG 0x80 + +#define JZ4770_GPIO_INT 0x10 +#define JZ4770_GPIO_PAT1 0x30 +#define JZ4770_GPIO_PAT0 0x40 +#define JZ4770_GPIO_FLAG 0x50 + +#define REG_SET(x) ((x) + 0x4) +#define REG_CLEAR(x) ((x) + 0x8) + +enum jz_version { + ID_JZ4740, + ID_JZ4770, + ID_JZ4780, +}; + +struct ingenic_gpio_chip { + struct regmap *map; + struct gpio_chip gc; + struct irq_chip irq_chip; + unsigned int irq, reg_base; + enum jz_version version; +}; + +static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg) +{ + unsigned int val; + + regmap_read(jzgc->map, jzgc->reg_base + reg, &val); + + return (u32) val; +} + +static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc, + u8 reg, u8 offset, bool set) +{ + if (set) + reg = REG_SET(reg); + else + reg = REG_CLEAR(reg); + + regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset)); +} + +static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset) +{ + unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN); + + return !!(val & BIT(offset)); +} + +static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value) +{ + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value); +} + +static void irq_set_type(struct ingenic_gpio_chip *jzgc, + u8 offset, unsigned int type) +{ + u8 reg1, reg2; + + if (jzgc->version >= ID_JZ4770) { + reg1 = JZ4770_GPIO_PAT1; + reg2 = JZ4770_GPIO_PAT0; + } else { + reg1 = JZ4740_GPIO_TRIG; + reg2 = JZ4740_GPIO_DIR; + } + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + gpio_ingenic_set_bit(jzgc, reg2, offset, true); + gpio_ingenic_set_bit(jzgc, reg1, offset, true); + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_ingenic_set_bit(jzgc, reg2, offset, false); + gpio_ingenic_set_bit(jzgc, reg1, offset, true); + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_ingenic_set_bit(jzgc, reg2, offset, true); + gpio_ingenic_set_bit(jzgc, reg1, offset, false); + break; + case IRQ_TYPE_LEVEL_LOW: + default: + gpio_ingenic_set_bit(jzgc, reg2, offset, false); + gpio_ingenic_set_bit(jzgc, reg1, offset, false); + break; + } +} + +static void ingenic_gpio_irq_mask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true); +} + +static void ingenic_gpio_irq_unmask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false); +} + +static void ingenic_gpio_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true); + + ingenic_gpio_irq_unmask(irqd); +} + +static void ingenic_gpio_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + + ingenic_gpio_irq_mask(irqd); + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false); +} + +static void ingenic_gpio_irq_ack(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + int irq = irqd->hwirq; + bool high; + + if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) { + /* + * Switch to an interrupt for the opposite edge to the one that + * triggered the interrupt being ACKed. + */ + high = gpio_get_value(jzgc, irq); + if (high) + irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING); + else + irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING); + } + + if (jzgc->version >= ID_JZ4770) + gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false); + else + gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true); +} + +static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + irq_set_handler_locked(irqd, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + irq_set_handler_locked(irqd, handle_level_irq); + break; + default: + irq_set_handler_locked(irqd, handle_bad_irq); + } + + if (type == IRQ_TYPE_EDGE_BOTH) { + /* + * The hardware does not support interrupts on both edges. The + * best we can do is to set up a single-edge interrupt and then + * switch to the opposing edge when ACKing the interrupt. + */ + bool high = gpio_get_value(jzgc, irqd->hwirq); + + type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING; + } + + irq_set_type(jzgc, irqd->hwirq, type); + return 0; +} + +static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + return irq_set_irq_wake(jzgc->irq, on); +} + +static void ingenic_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data); + unsigned long flag, i; + + chained_irq_enter(irq_chip, desc); + + if (jzgc->version >= ID_JZ4770) + flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG); + else + flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG); + + for_each_set_bit(i, &flag, 32) + generic_handle_irq(irq_linear_revmap(gc->irqdomain, i)); + chained_irq_exit(irq_chip, desc); +} + +static void ingenic_gpio_set(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + gpio_set_value(jzgc, offset, value); +} + +static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); + + return (int) gpio_get_value(jzgc, offset); +} + +static int ingenic_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + return pinctrl_gpio_direction_input(gc->base + offset); +} + +static int ingenic_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + ingenic_gpio_set(gc, offset, value); + return pinctrl_gpio_direction_output(gc->base + offset); +} + +static const struct of_device_id ingenic_gpio_of_match[] = { + { .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 }, + { .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 }, + { .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 }, + {}, +}; +MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match); + +static int ingenic_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id = of_match_device( + ingenic_gpio_of_match, dev); + struct ingenic_gpio_chip *jzgc; + u32 bank; + int err; + + jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL); + if (!jzgc) + return -ENOMEM; + + jzgc->map = dev_get_drvdata(dev->parent); + if (!jzgc->map) { + dev_err(dev, "Cannot get parent regmap\n"); + return -ENXIO; + } + + err = of_property_read_u32(dev->of_node, "reg", &bank); + if (err) { + dev_err(dev, "Cannot read \"reg\" property: %i\n", err); + return err; + } + + jzgc->reg_base = bank * 0x100; + + jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank); + if (!jzgc->gc.label) + return -ENOMEM; + + /* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY + * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN + * INSTEAD. + */ + jzgc->gc.base = bank * 32; + + jzgc->gc.ngpio = 32; + jzgc->gc.parent = dev; + jzgc->gc.of_node = dev->of_node; + jzgc->gc.owner = THIS_MODULE; + jzgc->version = (enum jz_version)of_id->data; + + jzgc->gc.set = ingenic_gpio_set; + jzgc->gc.get = ingenic_gpio_get; + jzgc->gc.direction_input = ingenic_gpio_direction_input; + jzgc->gc.direction_output = ingenic_gpio_direction_output; + + if (of_property_read_bool(dev->of_node, "gpio-ranges")) { + jzgc->gc.request = gpiochip_generic_request; + jzgc->gc.free = gpiochip_generic_free; + } + + err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc); + if (err) + return err; + + jzgc->irq = irq_of_parse_and_map(dev->of_node, 0); + if (!jzgc->irq) + return -EINVAL; + + jzgc->irq_chip.name = jzgc->gc.label; + jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable; + jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable; + jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask; + jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask; + jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack; + jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type; + jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake; + jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND; + + err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0, + handle_level_irq, IRQ_TYPE_NONE); + if (err) + return err; + + gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip, + jzgc->irq, ingenic_gpio_irq_handler); + return 0; +} + +static int ingenic_gpio_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver ingenic_gpio_driver = { + .driver = { + .name = "gpio-ingenic", + .of_match_table = of_match_ptr(ingenic_gpio_of_match), + }, + .probe = ingenic_gpio_probe, + .remove = ingenic_gpio_remove, +}; + +static int __init ingenic_gpio_drv_register(void) +{ + return platform_driver_register(&ingenic_gpio_driver); +} +subsys_initcall(ingenic_gpio_drv_register); + +static void __exit ingenic_gpio_drv_unregister(void) +{ + platform_driver_unregister(&ingenic_gpio_driver); +} +module_exit(ingenic_gpio_drv_unregister); + +MODULE_AUTHOR("Paul Cercueil "); +MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver"); +MODULE_LICENSE("GPL"); From fa5ed6bc11153199b07b06a208a537e137df4e5d Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:03 +0200 Subject: [PATCH 05/14] mmc: jz4740: Let the pinctrl driver configure the pins Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil Acked-by: Ulf Hansson Signed-off-by: Linus Walleij --- drivers/mmc/host/jz4740_mmc.c | 44 ++++------------------------------- 1 file changed, 5 insertions(+), 39 deletions(-) diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 57e254aac48d..7db8c7a8d38d 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -27,7 +28,6 @@ #include #include -#include #include #include #include @@ -901,15 +901,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = { .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, }; -static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = { - JZ_GPIO_BULK_PIN(MSC_CMD), - JZ_GPIO_BULK_PIN(MSC_CLK), - JZ_GPIO_BULK_PIN(MSC_DATA0), - JZ_GPIO_BULK_PIN(MSC_DATA1), - JZ_GPIO_BULK_PIN(MSC_DATA2), - JZ_GPIO_BULK_PIN(MSC_DATA3), -}; - static int jz4740_mmc_request_gpio(struct device *dev, int gpio, const char *name, bool output, int value) { @@ -973,15 +964,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev) gpio_free(pdata->gpio_power); } -static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host) -{ - size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins); - if (host->pdata && host->pdata->data_1bit) - num_pins -= 3; - - return num_pins; -} - static int jz4740_mmc_probe(struct platform_device* pdev) { int ret; @@ -1022,15 +1004,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) goto err_free_host; } - ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - if (ret) { - dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret); - goto err_free_host; - } - ret = jz4740_mmc_request_gpios(mmc, pdev); if (ret) - goto err_gpio_bulk_free; + goto err_release_dma; mmc->ops = &jz4740_mmc_ops; mmc->f_min = JZ_MMC_CLK_RATE / 128; @@ -1086,10 +1062,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) free_irq(host->irq, host); err_free_gpios: jz4740_mmc_free_gpios(pdev); -err_gpio_bulk_free: +err_release_dma: if (host->use_dma) jz4740_mmc_release_dma_channels(host); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); err_free_host: mmc_free_host(mmc); @@ -1109,7 +1084,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev) free_irq(host->irq, host); jz4740_mmc_free_gpios(pdev); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); if (host->use_dma) jz4740_mmc_release_dma_channels(host); @@ -1123,20 +1097,12 @@ static int jz4740_mmc_remove(struct platform_device *pdev) static int jz4740_mmc_suspend(struct device *dev) { - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; + return pinctrl_pm_select_sleep_state(dev); } static int jz4740_mmc_resume(struct device *dev) { - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; + return pinctrl_pm_select_default_state(dev); } static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, From 47096d702c542b7cf4009e49cb492cab879d347f Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:06 +0200 Subject: [PATCH 06/14] pwm: jz4740: Let the pinctrl driver configure the pins Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. One inherent problem of this new approach is that the pinctrl framework does not allow us to configure each pin on demand, when the various PWM channels are requested or released. For instance, the PWM channels can be configured from sysfs, which would require all PWM pins to be configured properly beforehand for the PWM function, eventually causing conflicts with other platform or board drivers. The proper solution here would be to modify the pwm-jz4740 driver to handle only one PWM channel, and create an instance of this driver for each one of the 8 PWM channels. Then, it could use the pinctrl framework to dynamically configure the PWM pin it controls. Until this can be done, the only jz4740 board supported upstream (Qi lb60) can configure all of its connected PWM pins in PWM function mode, since those are not used by other drivers nor by GPIOs on the board. Signed-off-by: Paul Cercueil Acked-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/pwm/pwm-jz4740.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c index 76d13150283f..a75ff3622450 100644 --- a/drivers/pwm/pwm-jz4740.c +++ b/drivers/pwm/pwm-jz4740.c @@ -21,22 +21,10 @@ #include #include -#include #include #define NUM_PWM 8 -static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = { - JZ_GPIO_PWM0, - JZ_GPIO_PWM1, - JZ_GPIO_PWM2, - JZ_GPIO_PWM3, - JZ_GPIO_PWM4, - JZ_GPIO_PWM5, - JZ_GPIO_PWM6, - JZ_GPIO_PWM7, -}; - struct jz4740_pwm_chip { struct pwm_chip chip; struct clk *clk; @@ -49,9 +37,6 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip) static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { - unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; - int ret; - /* * Timers 0 and 1 are used for system tasks, so they are unavailable * for use as PWMs. @@ -59,15 +44,6 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) if (pwm->hwpwm < 2) return -EBUSY; - ret = gpio_request(gpio, pwm->label); - if (ret) { - dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n", - gpio, ret); - return ret; - } - - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM); - jz4740_timer_start(pwm->hwpwm); return 0; @@ -75,13 +51,8 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { - unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; - jz4740_timer_set_ctrl(pwm->hwpwm, 0); - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE); - gpio_free(gpio); - jz4740_timer_stop(pwm->hwpwm); } From 695ff98577aa629fecba28769c628c883681d051 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:05 +0200 Subject: [PATCH 07/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Linus Walleij --- drivers/video/fbdev/jz4740_fb.c | 104 +------------------------------- 1 file changed, 3 insertions(+), 101 deletions(-) diff --git a/drivers/video/fbdev/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c index 87790e9644d0..b57df83fdbd3 100644 --- a/drivers/video/fbdev/jz4740_fb.c +++ b/drivers/video/fbdev/jz4740_fb.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -27,7 +28,6 @@ #include #include -#include #define JZ_REG_LCD_CFG 0x00 #define JZ_REG_LCD_VSYNC 0x04 @@ -146,93 +146,6 @@ static const struct fb_fix_screeninfo jzfb_fix = { .accel = FB_ACCEL_NONE, }; -static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = { - JZ_GPIO_BULK_PIN(LCD_PCLK), - JZ_GPIO_BULK_PIN(LCD_HSYNC), - JZ_GPIO_BULK_PIN(LCD_VSYNC), - JZ_GPIO_BULK_PIN(LCD_DE), - JZ_GPIO_BULK_PIN(LCD_PS), - JZ_GPIO_BULK_PIN(LCD_REV), - JZ_GPIO_BULK_PIN(LCD_CLS), - JZ_GPIO_BULK_PIN(LCD_SPL), -}; - -static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = { - JZ_GPIO_BULK_PIN(LCD_DATA0), - JZ_GPIO_BULK_PIN(LCD_DATA1), - JZ_GPIO_BULK_PIN(LCD_DATA2), - JZ_GPIO_BULK_PIN(LCD_DATA3), - JZ_GPIO_BULK_PIN(LCD_DATA4), - JZ_GPIO_BULK_PIN(LCD_DATA5), - JZ_GPIO_BULK_PIN(LCD_DATA6), - JZ_GPIO_BULK_PIN(LCD_DATA7), - JZ_GPIO_BULK_PIN(LCD_DATA8), - JZ_GPIO_BULK_PIN(LCD_DATA9), - JZ_GPIO_BULK_PIN(LCD_DATA10), - JZ_GPIO_BULK_PIN(LCD_DATA11), - JZ_GPIO_BULK_PIN(LCD_DATA12), - JZ_GPIO_BULK_PIN(LCD_DATA13), - JZ_GPIO_BULK_PIN(LCD_DATA14), - JZ_GPIO_BULK_PIN(LCD_DATA15), - JZ_GPIO_BULK_PIN(LCD_DATA16), - JZ_GPIO_BULK_PIN(LCD_DATA17), -}; - -static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb) -{ - unsigned int num; - - switch (jzfb->pdata->lcd_type) { - case JZ_LCD_TYPE_GENERIC_16_BIT: - num = 4; - break; - case JZ_LCD_TYPE_GENERIC_18_BIT: - num = 4; - break; - case JZ_LCD_TYPE_8BIT_SERIAL: - num = 3; - break; - case JZ_LCD_TYPE_SPECIAL_TFT_1: - case JZ_LCD_TYPE_SPECIAL_TFT_2: - case JZ_LCD_TYPE_SPECIAL_TFT_3: - num = 8; - break; - default: - num = 0; - break; - } - return num; -} - -static unsigned int jzfb_num_data_pins(struct jzfb *jzfb) -{ - unsigned int num; - - switch (jzfb->pdata->lcd_type) { - case JZ_LCD_TYPE_GENERIC_16_BIT: - num = 16; - break; - case JZ_LCD_TYPE_GENERIC_18_BIT: - num = 18; - break; - case JZ_LCD_TYPE_8BIT_SERIAL: - num = 8; - break; - case JZ_LCD_TYPE_SPECIAL_TFT_1: - case JZ_LCD_TYPE_SPECIAL_TFT_2: - case JZ_LCD_TYPE_SPECIAL_TFT_3: - if (jzfb->pdata->bpp == 18) - num = 18; - else - num = 16; - break; - default: - num = 0; - break; - } - return num; -} - /* Based on CNVT_TOHW macro from skeletonfb.c */ static inline uint32_t jzfb_convert_color_to_hw(unsigned val, struct fb_bitfield *bf) @@ -487,8 +400,7 @@ static void jzfb_enable(struct jzfb *jzfb) clk_prepare_enable(jzfb->ldclk); - jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb)); - jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb)); + pinctrl_pm_select_default_state(&jzfb->pdev->dev); writel(0, jzfb->base + JZ_REG_LCD_STATE); @@ -511,8 +423,7 @@ static void jzfb_disable(struct jzfb *jzfb) ctrl = readl(jzfb->base + JZ_REG_LCD_STATE); } while (!(ctrl & JZ_LCD_STATE_DISABLED)); - jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb)); - jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb)); + pinctrl_pm_select_sleep_state(&jzfb->pdev->dev); clk_disable_unprepare(jzfb->ldclk); } @@ -701,9 +612,6 @@ static int jzfb_probe(struct platform_device *pdev) fb->mode = NULL; jzfb_set_par(fb); - jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb)); - jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb)); - ret = register_framebuffer(fb); if (ret) { dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret); @@ -715,9 +623,6 @@ static int jzfb_probe(struct platform_device *pdev) return 0; err_free_devmem: - jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb)); - jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb)); - fb_dealloc_cmap(&fb->cmap); jzfb_free_devmem(jzfb); err_framebuffer_release: @@ -731,9 +636,6 @@ static int jzfb_remove(struct platform_device *pdev) jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb); - jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb)); - jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb)); - fb_dealloc_cmap(&jzfb->fb->cmap); jzfb_free_devmem(jzfb); From cf2fd519e6ec1fc5eb0fc15d2544fb26c4fd8e11 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:04 +0200 Subject: [PATCH 08/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins Before, this NAND driver would set itself the configuration of the chip-select pins for the various NAND banks. Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil Acked-by: Boris Brezillon Signed-off-by: Linus Walleij --- drivers/mtd/nand/jz4740_nand.c | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 5551c36adbdf..0d06a1f07d82 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -25,7 +25,6 @@ #include -#include #include #define JZ_REG_NAND_CTRL 0x50 @@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev, uint8_t *nand_dev_id) { int ret; - int gpio; - char gpio_name[9]; char res_name[6]; uint32_t ctrl; struct nand_chip *chip = &nand->chip; struct mtd_info *mtd = nand_to_mtd(chip); - /* Request GPIO port. */ - gpio = JZ_GPIO_MEM_CS0 + bank - 1; - sprintf(gpio_name, "NAND CS%d", bank); - ret = gpio_request(gpio, gpio_name); - if (ret) { - dev_warn(&pdev->dev, - "Failed to request %s gpio %d: %d\n", - gpio_name, gpio, ret); - goto notfound_gpio; - } - /* Request I/O resource. */ sprintf(res_name, "bank%d", bank); ret = jz_nand_ioremap_resource(pdev, res_name, &nand->bank_mem[bank - 1], &nand->bank_base[bank - 1]); if (ret) - goto notfound_resource; + return ret; /* Enable chip in bank. */ - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0); ctrl = readl(nand->base + JZ_REG_NAND_CTRL); ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1); writel(ctrl, nand->base + JZ_REG_NAND_CTRL); @@ -377,12 +362,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev, dev_info(&pdev->dev, "No chip found on bank %i\n", bank); ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1)); writel(ctrl, nand->base + JZ_REG_NAND_CTRL); - jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE); jz_nand_iounmap_resource(nand->bank_mem[bank - 1], nand->bank_base[bank - 1]); -notfound_resource: - gpio_free(gpio); -notfound_gpio: return ret; } @@ -503,7 +484,6 @@ static int jz_nand_probe(struct platform_device *pdev) err_unclaim_banks: while (chipnr--) { unsigned char bank = nand->banks[chipnr]; - gpio_free(JZ_GPIO_MEM_CS0 + bank - 1); jz_nand_iounmap_resource(nand->bank_mem[bank - 1], nand->bank_base[bank - 1]); } @@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev) if (bank != 0) { jz_nand_iounmap_resource(nand->bank_mem[bank - 1], nand->bank_base[bank - 1]); - gpio_free(JZ_GPIO_MEM_CS0 + bank - 1); } } From 37b4c3ca559f0c5cc2f0e7478e438e486ba57e05 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:58 +0200 Subject: [PATCH 09/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs There is a pinctrl driver for each of the Ingenic SoCs supported by the upstream Linux kernel. In order to switch away from the old GPIO platform code, we now enable the pinctrl drivers by default for the Ingenic SoCs. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2828ecde133d..45bcd1cfcec0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -364,6 +364,7 @@ config MACH_INGENIC select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_MIPS_CPU + select PINCTRL select GPIOLIB select COMMON_CLK select GENERIC_IRQ_CHIP From 3951cbb548b2d2fdb1178ad5158fb1d65a8a15df Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:52:59 +0200 Subject: [PATCH 10/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers For a description of the pinctrl devicetree node, please read Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt For a description of the gpio devicetree nodes, please read Documentation/devicetree/bindings/gpio/ingenic,gpio.txt Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/boot/dts/ingenic/jz4740.dtsi | 68 ++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 3e1587f1f77a..2ca7ce7481f1 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -55,6 +55,74 @@ rtc_dev: rtc@10003000 { clock-names = "rtc"; }; + pinctrl: pin-controller@10010000 { + compatible = "ingenic,jz4740-pinctrl"; + reg = <0x10010000 0x400>; + + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4740-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <28>; + }; + + gpb: gpio@1 { + compatible = "ingenic,jz4740-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <27>; + }; + + gpc: gpio@2 { + compatible = "ingenic,jz4740-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <26>; + }; + + gpd: gpio@3 { + compatible = "ingenic,jz4740-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <25>; + }; + }; + uart0: serial@10030000 { compatible = "ingenic,jz4740-uart"; reg = <0x10030000 0x100>; From d32613c33705ca0a022657a7b3d2cf94c2e08e08 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:00 +0200 Subject: [PATCH 11/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers For a description of the devicetree node, please read Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt For a description of the gpio devicetree nodes, please read Documentation/devicetree/bindings/gpio/ingenic,gpio.txt Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/boot/dts/ingenic/jz4780.dtsi | 98 ++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index b868b429add2..4853ef67b3ab 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -44,6 +44,104 @@ cgu: jz4780-cgu@10000000 { #clock-cells = <1>; }; + pinctrl: pin-controller@10010000 { + compatible = "ingenic,jz4780-pinctrl"; + reg = <0x10010000 0x600>; + + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4780-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + + gpb: gpio@1 { + compatible = "ingenic,jz4780-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <16>; + }; + + gpc: gpio@2 { + compatible = "ingenic,jz4780-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <15>; + }; + + gpd: gpio@3 { + compatible = "ingenic,jz4780-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <14>; + }; + + gpe: gpio@4 { + compatible = "ingenic,jz4780-gpio"; + reg = <4>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <13>; + }; + + gpf: gpio@5 { + compatible = "ingenic,jz4780-gpio"; + reg = <5>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 160 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <12>; + }; + }; + uart0: serial@10030000 { compatible = "ingenic,jz4780-uart"; reg = <0x10030000 0x100>; From 636f8ba67fb606a4a0ab4deedb39c71d1ea5dc8a Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:01 +0200 Subject: [PATCH 12/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers We set the pin configuration for the jz4740-nand, jz4740-mmc, jz4740-fb, jz4740-pwm and jz4740-uart drivers. This will permit those drivers to be cleaned out of the custom GPIO code that they currently use. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/boot/dts/ingenic/qi_lb60.dts | 13 +++++++ arch/mips/jz4740/board-qi_lb60.c | 48 +++++++++++++++++++------- 2 files changed, 49 insertions(+), 12 deletions(-) diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts index be1a7d3a3e1b..b715ee2ac2ee 100644 --- a/arch/mips/boot/dts/ingenic/qi_lb60.dts +++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts @@ -17,3 +17,16 @@ &ext { &rtc_dev { system-power-controller; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; +}; + +&pinctrl { + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; +}; diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index a5bd94b95263..6d7f97552200 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include #include #include @@ -159,7 +161,7 @@ static struct jz_nand_platform_data qi_lb60_nand_pdata = { static struct gpiod_lookup_table qi_lb60_nand_gpio_table = { .dev_id = "jz4740-nand.0", .table = { - GPIO_LOOKUP("Bank C", 30, "busy", 0), + GPIO_LOOKUP("GPIOC", 30, "busy", 0), { }, }, }; @@ -421,8 +423,8 @@ static struct platform_device qi_lb60_audio_device = { static struct gpiod_lookup_table qi_lb60_audio_gpio_table = { .dev_id = "qi-lb60-audio", .table = { - GPIO_LOOKUP("Bank B", 29, "snd", 0), - GPIO_LOOKUP("Bank D", 4, "amp", 0), + GPIO_LOOKUP("GPIOB", 29, "snd", 0), + GPIO_LOOKUP("GPIOD", 4, "amp", 0), { }, }, }; @@ -447,13 +449,36 @@ static struct platform_device *jz_platform_devices[] __initdata = { &qi_lb60_audio_device, }; -static void __init board_gpio_setup(void) -{ - /* We only need to enable/disable pullup here for pins used in generic - * drivers. Everything else is done by the drivers themselves. */ - jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N); - jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD); -} +static unsigned long pin_cfg_bias_disable[] = { + PIN_CONFIG_BIAS_DISABLE, +}; + +static struct pinctrl_map pin_map[] __initdata = { + /* NAND pin configuration */ + PIN_MAP_MUX_GROUP_DEFAULT("jz4740-nand", + "10010000.jz4740-pinctrl", "nand", "nand-cs1"), + + /* fbdev pin configuration */ + PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_DEFAULT, + "10010000.jz4740-pinctrl", "lcd", "lcd-8bit"), + PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_SLEEP, + "10010000.jz4740-pinctrl", "lcd", "lcd-no-pins"), + + /* MMC pin configuration */ + PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0", + "10010000.jz4740-pinctrl", "mmc", "mmc-1bit"), + PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0", + "10010000.jz4740-pinctrl", "mmc", "mmc-4bit"), + PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0", + "10010000.jz4740-pinctrl", "PD0", pin_cfg_bias_disable), + PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0", + "10010000.jz4740-pinctrl", "PD2", pin_cfg_bias_disable), + + /* PWM pin configuration */ + PIN_MAP_MUX_GROUP_DEFAULT("jz4740-pwm", + "10010000.jz4740-pinctrl", "pwm4", "pwm4"), +}; + static int __init qi_lb60_init_platform_devices(void) { @@ -469,6 +494,7 @@ static int __init qi_lb60_init_platform_devices(void) ARRAY_SIZE(qi_lb60_spi_board_info)); pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup)); + pinctrl_register_mappings(pin_map, ARRAY_SIZE(pin_map)); return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices)); @@ -479,8 +505,6 @@ static int __init qi_lb60_board_setup(void) { printk(KERN_INFO "Qi Hardware JZ4740 QI LB60 setup\n"); - board_gpio_setup(); - if (qi_lb60_init_platform_devices()) panic("Failed to initialize platform devices"); From 89a6139cd802dc40729b19559effb7a2900b0df6 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:02 +0200 Subject: [PATCH 13/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers We set the pin configuration for the jz4780-nand and jz4780-uart drivers. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/boot/dts/ingenic/ci20.dts | 60 +++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 1652d8d60b1e..fd138d9978c1 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -29,18 +29,30 @@ &ext { &uart0 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; }; &uart1 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1>; }; &uart3 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; }; &uart4 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart4>; }; &nemc { @@ -61,6 +73,13 @@ nandc: nand-controller@1 { ingenic,nemc-tAW = <15>; ingenic,nemc-tSTRV = <100>; + /* + * Only CLE/ALE are needed for the devices that are connected, rather + * than the full address line set. + */ + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + nand@1 { reg = <1>; @@ -69,6 +88,9 @@ nand@1 { nand-ecc-mode = "hw"; nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + partitions { compatible = "fixed-partitions"; #address-cells = <2>; @@ -106,3 +128,41 @@ partition@0x8c00000 { &bch { status = "okay"; }; + +&pinctrl { + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; + + pins_uart1: uart1 { + function = "uart1"; + groups = "uart1-data"; + bias-disable; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + + pins_uart4: uart4 { + function = "uart4"; + groups = "uart4-data"; + bias-disable; + }; + + pins_nemc: nemc { + function = "nemc"; + groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; + bias-disable; + }; + + pins_nemc_cs1: nemc-cs1 { + function = "nemc-cs1"; + groups = "nemc-cs1"; + bias-disable; + }; +}; From e25f2af64679581f22b3b9a4681964bd0bb8e417 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 12 May 2017 18:53:07 +0200 Subject: [PATCH 14/14] MIPS: jz4740: Remove custom GPIO code All the drivers for the various hardware elements of the jz4740 SoC have been modified to use the pinctrl framework for their pin configuration needs. As such, this platform code is now unused and can be deleted. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- arch/mips/include/asm/mach-jz4740/gpio.h | 371 ---------------- arch/mips/jz4740/Makefile | 2 - arch/mips/jz4740/gpio.c | 519 ----------------------- 3 files changed, 892 deletions(-) delete mode 100644 arch/mips/jz4740/gpio.c diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h index 7c7708a23baa..fd847c984701 100644 --- a/arch/mips/include/asm/mach-jz4740/gpio.h +++ b/arch/mips/include/asm/mach-jz4740/gpio.h @@ -16,380 +16,9 @@ #ifndef _JZ_GPIO_H #define _JZ_GPIO_H -#include - -enum jz_gpio_function { - JZ_GPIO_FUNC_NONE, - JZ_GPIO_FUNC1, - JZ_GPIO_FUNC2, - JZ_GPIO_FUNC3, -}; - -/* - Usually a driver for a SoC component has to request several gpio pins and - configure them as function pins. - jz_gpio_bulk_request can be used to ease this process. - Usually one would do something like: - - static const struct jz_gpio_bulk_request i2c_pins[] = { - JZ_GPIO_BULK_PIN(I2C_SDA), - JZ_GPIO_BULK_PIN(I2C_SCK), - }; - - inside the probe function: - - ret = jz_gpio_bulk_request(i2c_pins, ARRAY_SIZE(i2c_pins)); - if (ret) { - ... - - inside the remove function: - - jz_gpio_bulk_free(i2c_pins, ARRAY_SIZE(i2c_pins)); - -*/ - -struct jz_gpio_bulk_request { - int gpio; - const char *name; - enum jz_gpio_function function; -}; - -#define JZ_GPIO_BULK_PIN(pin) { \ - .gpio = JZ_GPIO_ ## pin, \ - .name = #pin, \ - .function = JZ_GPIO_FUNC_ ## pin \ -} - -int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num); -void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num); -void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num); -void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num); -void jz_gpio_enable_pullup(unsigned gpio); -void jz_gpio_disable_pullup(unsigned gpio); -int jz_gpio_set_function(int gpio, enum jz_gpio_function function); - -int jz_gpio_port_direction_input(int port, uint32_t mask); -int jz_gpio_port_direction_output(int port, uint32_t mask); -void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask); -uint32_t jz_gpio_port_get_value(int port, uint32_t mask); - #define JZ_GPIO_PORTA(x) ((x) + 32 * 0) #define JZ_GPIO_PORTB(x) ((x) + 32 * 1) #define JZ_GPIO_PORTC(x) ((x) + 32 * 2) #define JZ_GPIO_PORTD(x) ((x) + 32 * 3) -/* Port A function pins */ -#define JZ_GPIO_MEM_DATA0 JZ_GPIO_PORTA(0) -#define JZ_GPIO_MEM_DATA1 JZ_GPIO_PORTA(1) -#define JZ_GPIO_MEM_DATA2 JZ_GPIO_PORTA(2) -#define JZ_GPIO_MEM_DATA3 JZ_GPIO_PORTA(3) -#define JZ_GPIO_MEM_DATA4 JZ_GPIO_PORTA(4) -#define JZ_GPIO_MEM_DATA5 JZ_GPIO_PORTA(5) -#define JZ_GPIO_MEM_DATA6 JZ_GPIO_PORTA(6) -#define JZ_GPIO_MEM_DATA7 JZ_GPIO_PORTA(7) -#define JZ_GPIO_MEM_DATA8 JZ_GPIO_PORTA(8) -#define JZ_GPIO_MEM_DATA9 JZ_GPIO_PORTA(9) -#define JZ_GPIO_MEM_DATA10 JZ_GPIO_PORTA(10) -#define JZ_GPIO_MEM_DATA11 JZ_GPIO_PORTA(11) -#define JZ_GPIO_MEM_DATA12 JZ_GPIO_PORTA(12) -#define JZ_GPIO_MEM_DATA13 JZ_GPIO_PORTA(13) -#define JZ_GPIO_MEM_DATA14 JZ_GPIO_PORTA(14) -#define JZ_GPIO_MEM_DATA15 JZ_GPIO_PORTA(15) -#define JZ_GPIO_MEM_DATA16 JZ_GPIO_PORTA(16) -#define JZ_GPIO_MEM_DATA17 JZ_GPIO_PORTA(17) -#define JZ_GPIO_MEM_DATA18 JZ_GPIO_PORTA(18) -#define JZ_GPIO_MEM_DATA19 JZ_GPIO_PORTA(19) -#define JZ_GPIO_MEM_DATA20 JZ_GPIO_PORTA(20) -#define JZ_GPIO_MEM_DATA21 JZ_GPIO_PORTA(21) -#define JZ_GPIO_MEM_DATA22 JZ_GPIO_PORTA(22) -#define JZ_GPIO_MEM_DATA23 JZ_GPIO_PORTA(23) -#define JZ_GPIO_MEM_DATA24 JZ_GPIO_PORTA(24) -#define JZ_GPIO_MEM_DATA25 JZ_GPIO_PORTA(25) -#define JZ_GPIO_MEM_DATA26 JZ_GPIO_PORTA(26) -#define JZ_GPIO_MEM_DATA27 JZ_GPIO_PORTA(27) -#define JZ_GPIO_MEM_DATA28 JZ_GPIO_PORTA(28) -#define JZ_GPIO_MEM_DATA29 JZ_GPIO_PORTA(29) -#define JZ_GPIO_MEM_DATA30 JZ_GPIO_PORTA(30) -#define JZ_GPIO_MEM_DATA31 JZ_GPIO_PORTA(31) - -#define JZ_GPIO_FUNC_MEM_DATA0 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA1 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA2 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA3 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA4 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA5 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA6 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA7 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA8 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA9 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA10 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA11 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA12 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA13 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA14 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA15 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA16 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA17 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA18 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA19 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA20 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA21 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA22 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA23 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA24 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA25 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA26 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA27 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA28 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA29 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA30 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DATA31 JZ_GPIO_FUNC1 - -/* Port B function pins */ -#define JZ_GPIO_MEM_ADDR0 JZ_GPIO_PORTB(0) -#define JZ_GPIO_MEM_ADDR1 JZ_GPIO_PORTB(1) -#define JZ_GPIO_MEM_ADDR2 JZ_GPIO_PORTB(2) -#define JZ_GPIO_MEM_ADDR3 JZ_GPIO_PORTB(3) -#define JZ_GPIO_MEM_ADDR4 JZ_GPIO_PORTB(4) -#define JZ_GPIO_MEM_ADDR5 JZ_GPIO_PORTB(5) -#define JZ_GPIO_MEM_ADDR6 JZ_GPIO_PORTB(6) -#define JZ_GPIO_MEM_ADDR7 JZ_GPIO_PORTB(7) -#define JZ_GPIO_MEM_ADDR8 JZ_GPIO_PORTB(8) -#define JZ_GPIO_MEM_ADDR9 JZ_GPIO_PORTB(9) -#define JZ_GPIO_MEM_ADDR10 JZ_GPIO_PORTB(10) -#define JZ_GPIO_MEM_ADDR11 JZ_GPIO_PORTB(11) -#define JZ_GPIO_MEM_ADDR12 JZ_GPIO_PORTB(12) -#define JZ_GPIO_MEM_ADDR13 JZ_GPIO_PORTB(13) -#define JZ_GPIO_MEM_ADDR14 JZ_GPIO_PORTB(14) -#define JZ_GPIO_MEM_ADDR15 JZ_GPIO_PORTB(15) -#define JZ_GPIO_MEM_ADDR16 JZ_GPIO_PORTB(16) -#define JZ_GPIO_LCD_CLS JZ_GPIO_PORTB(17) -#define JZ_GPIO_LCD_SPL JZ_GPIO_PORTB(18) -#define JZ_GPIO_MEM_DCS JZ_GPIO_PORTB(19) -#define JZ_GPIO_MEM_RAS JZ_GPIO_PORTB(20) -#define JZ_GPIO_MEM_CAS JZ_GPIO_PORTB(21) -#define JZ_GPIO_MEM_SDWE JZ_GPIO_PORTB(22) -#define JZ_GPIO_MEM_CKE JZ_GPIO_PORTB(23) -#define JZ_GPIO_MEM_CKO JZ_GPIO_PORTB(24) -#define JZ_GPIO_MEM_CS0 JZ_GPIO_PORTB(25) -#define JZ_GPIO_MEM_CS1 JZ_GPIO_PORTB(26) -#define JZ_GPIO_MEM_CS2 JZ_GPIO_PORTB(27) -#define JZ_GPIO_MEM_CS3 JZ_GPIO_PORTB(28) -#define JZ_GPIO_MEM_RD JZ_GPIO_PORTB(29) -#define JZ_GPIO_MEM_WR JZ_GPIO_PORTB(30) -#define JZ_GPIO_MEM_WE0 JZ_GPIO_PORTB(31) - -#define JZ_GPIO_FUNC_MEM_ADDR0 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR1 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR2 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR3 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR4 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR5 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR6 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR7 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR8 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR9 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR10 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR11 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR12 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR13 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR14 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR15 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_ADDR16 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_CLS JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_SPL JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_DCS JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_RAS JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CAS JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_SDWE JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CKE JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CKO JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CS0 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CS1 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CS2 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_CS3 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_RD JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WR JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WE0 JZ_GPIO_FUNC1 - - -#define JZ_GPIO_MEM_ADDR21 JZ_GPIO_PORTB(17) -#define JZ_GPIO_MEM_ADDR22 JZ_GPIO_PORTB(18) - -#define JZ_GPIO_FUNC_MEM_ADDR21 JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_ADDR22 JZ_GPIO_FUNC2 - -/* Port C function pins */ -#define JZ_GPIO_LCD_DATA0 JZ_GPIO_PORTC(0) -#define JZ_GPIO_LCD_DATA1 JZ_GPIO_PORTC(1) -#define JZ_GPIO_LCD_DATA2 JZ_GPIO_PORTC(2) -#define JZ_GPIO_LCD_DATA3 JZ_GPIO_PORTC(3) -#define JZ_GPIO_LCD_DATA4 JZ_GPIO_PORTC(4) -#define JZ_GPIO_LCD_DATA5 JZ_GPIO_PORTC(5) -#define JZ_GPIO_LCD_DATA6 JZ_GPIO_PORTC(6) -#define JZ_GPIO_LCD_DATA7 JZ_GPIO_PORTC(7) -#define JZ_GPIO_LCD_DATA8 JZ_GPIO_PORTC(8) -#define JZ_GPIO_LCD_DATA9 JZ_GPIO_PORTC(9) -#define JZ_GPIO_LCD_DATA10 JZ_GPIO_PORTC(10) -#define JZ_GPIO_LCD_DATA11 JZ_GPIO_PORTC(11) -#define JZ_GPIO_LCD_DATA12 JZ_GPIO_PORTC(12) -#define JZ_GPIO_LCD_DATA13 JZ_GPIO_PORTC(13) -#define JZ_GPIO_LCD_DATA14 JZ_GPIO_PORTC(14) -#define JZ_GPIO_LCD_DATA15 JZ_GPIO_PORTC(15) -#define JZ_GPIO_LCD_DATA16 JZ_GPIO_PORTC(16) -#define JZ_GPIO_LCD_DATA17 JZ_GPIO_PORTC(17) -#define JZ_GPIO_LCD_PCLK JZ_GPIO_PORTC(18) -#define JZ_GPIO_LCD_HSYNC JZ_GPIO_PORTC(19) -#define JZ_GPIO_LCD_VSYNC JZ_GPIO_PORTC(20) -#define JZ_GPIO_LCD_DE JZ_GPIO_PORTC(21) -#define JZ_GPIO_LCD_PS JZ_GPIO_PORTC(22) -#define JZ_GPIO_LCD_REV JZ_GPIO_PORTC(23) -#define JZ_GPIO_MEM_WE1 JZ_GPIO_PORTC(24) -#define JZ_GPIO_MEM_WE2 JZ_GPIO_PORTC(25) -#define JZ_GPIO_MEM_WE3 JZ_GPIO_PORTC(26) -#define JZ_GPIO_MEM_WAIT JZ_GPIO_PORTC(27) -#define JZ_GPIO_MEM_FRE JZ_GPIO_PORTC(28) -#define JZ_GPIO_MEM_FWE JZ_GPIO_PORTC(29) - -#define JZ_GPIO_FUNC_LCD_DATA0 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA1 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA2 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA3 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA4 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA5 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA6 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA7 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA8 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA9 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA10 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA11 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA12 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA13 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA14 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA15 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA16 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DATA17 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_PCLK JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_VSYNC JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_HSYNC JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_DE JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_PS JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_REV JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WE1 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WE2 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WE3 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_WAIT JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_FRE JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MEM_FWE JZ_GPIO_FUNC1 - - -#define JZ_GPIO_MEM_ADDR19 JZ_GPIO_PORTB(22) -#define JZ_GPIO_MEM_ADDR20 JZ_GPIO_PORTB(23) - -#define JZ_GPIO_FUNC_MEM_ADDR19 JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_ADDR20 JZ_GPIO_FUNC2 - -/* Port D function pins */ -#define JZ_GPIO_CIM_DATA0 JZ_GPIO_PORTD(0) -#define JZ_GPIO_CIM_DATA1 JZ_GPIO_PORTD(1) -#define JZ_GPIO_CIM_DATA2 JZ_GPIO_PORTD(2) -#define JZ_GPIO_CIM_DATA3 JZ_GPIO_PORTD(3) -#define JZ_GPIO_CIM_DATA4 JZ_GPIO_PORTD(4) -#define JZ_GPIO_CIM_DATA5 JZ_GPIO_PORTD(5) -#define JZ_GPIO_CIM_DATA6 JZ_GPIO_PORTD(6) -#define JZ_GPIO_CIM_DATA7 JZ_GPIO_PORTD(7) -#define JZ_GPIO_MSC_CMD JZ_GPIO_PORTD(8) -#define JZ_GPIO_MSC_CLK JZ_GPIO_PORTD(9) -#define JZ_GPIO_MSC_DATA0 JZ_GPIO_PORTD(10) -#define JZ_GPIO_MSC_DATA1 JZ_GPIO_PORTD(11) -#define JZ_GPIO_MSC_DATA2 JZ_GPIO_PORTD(12) -#define JZ_GPIO_MSC_DATA3 JZ_GPIO_PORTD(13) -#define JZ_GPIO_CIM_MCLK JZ_GPIO_PORTD(14) -#define JZ_GPIO_CIM_PCLK JZ_GPIO_PORTD(15) -#define JZ_GPIO_CIM_VSYNC JZ_GPIO_PORTD(16) -#define JZ_GPIO_CIM_HSYNC JZ_GPIO_PORTD(17) -#define JZ_GPIO_SPI_CLK JZ_GPIO_PORTD(18) -#define JZ_GPIO_SPI_CE0 JZ_GPIO_PORTD(19) -#define JZ_GPIO_SPI_DT JZ_GPIO_PORTD(20) -#define JZ_GPIO_SPI_DR JZ_GPIO_PORTD(21) -#define JZ_GPIO_SPI_CE1 JZ_GPIO_PORTD(22) -#define JZ_GPIO_PWM0 JZ_GPIO_PORTD(23) -#define JZ_GPIO_PWM1 JZ_GPIO_PORTD(24) -#define JZ_GPIO_PWM2 JZ_GPIO_PORTD(25) -#define JZ_GPIO_PWM3 JZ_GPIO_PORTD(26) -#define JZ_GPIO_PWM4 JZ_GPIO_PORTD(27) -#define JZ_GPIO_PWM5 JZ_GPIO_PORTD(28) -#define JZ_GPIO_PWM6 JZ_GPIO_PORTD(30) -#define JZ_GPIO_PWM7 JZ_GPIO_PORTD(31) - -#define JZ_GPIO_FUNC_CIM_DATA JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_CIM_DATA0 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA1 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA2 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA3 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA4 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA5 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA6 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_CIM_DATA7 JZ_GPIO_FUNC_CIM_DATA -#define JZ_GPIO_FUNC_MSC_CMD JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MSC_CLK JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MSC_DATA JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_MSC_DATA0 JZ_GPIO_FUNC_MSC_DATA -#define JZ_GPIO_FUNC_MSC_DATA1 JZ_GPIO_FUNC_MSC_DATA -#define JZ_GPIO_FUNC_MSC_DATA2 JZ_GPIO_FUNC_MSC_DATA -#define JZ_GPIO_FUNC_MSC_DATA3 JZ_GPIO_FUNC_MSC_DATA -#define JZ_GPIO_FUNC_CIM_MCLK JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_CIM_PCLK JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_CIM_VSYNC JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_CIM_HSYNC JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_SPI_CLK JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_SPI_CE0 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_SPI_DT JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_SPI_DR JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_SPI_CE1 JZ_GPIO_FUNC1 - -#define JZ_GPIO_FUNC_PWM JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_PWM0 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM1 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM2 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM3 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM4 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM5 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM6 JZ_GPIO_FUNC_PWM -#define JZ_GPIO_FUNC_PWM7 JZ_GPIO_FUNC_PWM - -#define JZ_GPIO_MEM_SCLK_RSTN JZ_GPIO_PORTD(18) -#define JZ_GPIO_MEM_BCLK JZ_GPIO_PORTD(19) -#define JZ_GPIO_MEM_SDATO JZ_GPIO_PORTD(20) -#define JZ_GPIO_MEM_SDATI JZ_GPIO_PORTD(21) -#define JZ_GPIO_MEM_SYNC JZ_GPIO_PORTD(22) -#define JZ_GPIO_I2C_SDA JZ_GPIO_PORTD(23) -#define JZ_GPIO_I2C_SCK JZ_GPIO_PORTD(24) -#define JZ_GPIO_UART0_TXD JZ_GPIO_PORTD(25) -#define JZ_GPIO_UART0_RXD JZ_GPIO_PORTD(26) -#define JZ_GPIO_MEM_ADDR17 JZ_GPIO_PORTD(27) -#define JZ_GPIO_MEM_ADDR18 JZ_GPIO_PORTD(28) -#define JZ_GPIO_UART0_CTS JZ_GPIO_PORTD(30) -#define JZ_GPIO_UART0_RTS JZ_GPIO_PORTD(31) - -#define JZ_GPIO_FUNC_MEM_SCLK_RSTN JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_BCLK JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_SDATO JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_SDATI JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_SYNC JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_I2C_SDA JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_I2C_SCK JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_UART0_TXD JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_UART0_RXD JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_ADDR17 JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_MEM_ADDR18 JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_UART0_CTS JZ_GPIO_FUNC2 -#define JZ_GPIO_FUNC_UART0_RTS JZ_GPIO_FUNC2 - -#define JZ_GPIO_UART1_RXD JZ_GPIO_PORTD(30) -#define JZ_GPIO_UART1_TXD JZ_GPIO_PORTD(31) - -#define JZ_GPIO_FUNC_UART1_RXD JZ_GPIO_FUNC3 -#define JZ_GPIO_FUNC_UART1_TXD JZ_GPIO_FUNC3 - #endif diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile index 39d70bde8cfe..6b9c1f7c31c9 100644 --- a/arch/mips/jz4740/Makefile +++ b/arch/mips/jz4740/Makefile @@ -7,8 +7,6 @@ obj-y += prom.o time.o reset.o setup.o \ platform.o timer.o -obj-$(CONFIG_MACH_JZ4740) += gpio.o - CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt # board specific support diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c deleted file mode 100644 index cac1ccde2214..000000000000 --- a/arch/mips/jz4740/gpio.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * Copyright (C) 2009-2010, Lars-Peter Clausen - * JZ4740 platform GPIO support - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include - -#include -#include -/* FIXME: needed for gpio_request(), try to remove consumer API from driver */ -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#define JZ4740_GPIO_BASE_A (32*0) -#define JZ4740_GPIO_BASE_B (32*1) -#define JZ4740_GPIO_BASE_C (32*2) -#define JZ4740_GPIO_BASE_D (32*3) - -#define JZ4740_GPIO_NUM_A 32 -#define JZ4740_GPIO_NUM_B 32 -#define JZ4740_GPIO_NUM_C 31 -#define JZ4740_GPIO_NUM_D 32 - -#define JZ4740_IRQ_GPIO_BASE_A (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_A) -#define JZ4740_IRQ_GPIO_BASE_B (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_B) -#define JZ4740_IRQ_GPIO_BASE_C (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_C) -#define JZ4740_IRQ_GPIO_BASE_D (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_D) - -#define JZ_REG_GPIO_PIN 0x00 -#define JZ_REG_GPIO_DATA 0x10 -#define JZ_REG_GPIO_DATA_SET 0x14 -#define JZ_REG_GPIO_DATA_CLEAR 0x18 -#define JZ_REG_GPIO_MASK 0x20 -#define JZ_REG_GPIO_MASK_SET 0x24 -#define JZ_REG_GPIO_MASK_CLEAR 0x28 -#define JZ_REG_GPIO_PULL 0x30 -#define JZ_REG_GPIO_PULL_SET 0x34 -#define JZ_REG_GPIO_PULL_CLEAR 0x38 -#define JZ_REG_GPIO_FUNC 0x40 -#define JZ_REG_GPIO_FUNC_SET 0x44 -#define JZ_REG_GPIO_FUNC_CLEAR 0x48 -#define JZ_REG_GPIO_SELECT 0x50 -#define JZ_REG_GPIO_SELECT_SET 0x54 -#define JZ_REG_GPIO_SELECT_CLEAR 0x58 -#define JZ_REG_GPIO_DIRECTION 0x60 -#define JZ_REG_GPIO_DIRECTION_SET 0x64 -#define JZ_REG_GPIO_DIRECTION_CLEAR 0x68 -#define JZ_REG_GPIO_TRIGGER 0x70 -#define JZ_REG_GPIO_TRIGGER_SET 0x74 -#define JZ_REG_GPIO_TRIGGER_CLEAR 0x78 -#define JZ_REG_GPIO_FLAG 0x80 -#define JZ_REG_GPIO_FLAG_CLEAR 0x14 - -#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f) -#define GPIO_TO_REG(gpio, reg) (gpio_to_jz_gpio_chip(gpio)->base + (reg)) -#define CHIP_TO_REG(chip, reg) (gpio_chip_to_jz_gpio_chip(chip)->base + (reg)) - -struct jz_gpio_chip { - unsigned int irq; - unsigned int irq_base; - uint32_t edge_trigger_both; - - void __iomem *base; - - struct gpio_chip gpio_chip; -}; - -static struct jz_gpio_chip jz4740_gpio_chips[]; - -static inline struct jz_gpio_chip *gpio_to_jz_gpio_chip(unsigned int gpio) -{ - return &jz4740_gpio_chips[gpio >> 5]; -} - -static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gc) -{ - return gpiochip_get_data(gc); -} - -static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); - return gc->private; -} - -static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg) -{ - writel(GPIO_TO_BIT(gpio), GPIO_TO_REG(gpio, reg)); -} - -int jz_gpio_set_function(int gpio, enum jz_gpio_function function) -{ - if (function == JZ_GPIO_FUNC_NONE) { - jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_CLEAR); - jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR); - jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR); - } else { - jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET); - jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR); - switch (function) { - case JZ_GPIO_FUNC1: - jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR); - break; - case JZ_GPIO_FUNC3: - jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_SET); - case JZ_GPIO_FUNC2: /* Falltrough */ - jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_SET); - break; - default: - BUG(); - break; - } - } - - return 0; -} -EXPORT_SYMBOL_GPL(jz_gpio_set_function); - -int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num) -{ - size_t i; - int ret; - - for (i = 0; i < num; ++i, ++request) { - ret = gpio_request(request->gpio, request->name); - if (ret) - goto err; - jz_gpio_set_function(request->gpio, request->function); - } - - return 0; - -err: - for (--request; i > 0; --i, --request) { - gpio_free(request->gpio); - jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); - } - - return ret; -} -EXPORT_SYMBOL_GPL(jz_gpio_bulk_request); - -void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num) -{ - size_t i; - - for (i = 0; i < num; ++i, ++request) { - gpio_free(request->gpio); - jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); - } - -} -EXPORT_SYMBOL_GPL(jz_gpio_bulk_free); - -void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num) -{ - size_t i; - - for (i = 0; i < num; ++i, ++request) { - jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); - jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR); - jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET); - } -} -EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend); - -void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num) -{ - size_t i; - - for (i = 0; i < num; ++i, ++request) - jz_gpio_set_function(request->gpio, request->function); -} -EXPORT_SYMBOL_GPL(jz_gpio_bulk_resume); - -void jz_gpio_enable_pullup(unsigned gpio) -{ - jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_CLEAR); -} -EXPORT_SYMBOL_GPL(jz_gpio_enable_pullup); - -void jz_gpio_disable_pullup(unsigned gpio) -{ - jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_SET); -} -EXPORT_SYMBOL_GPL(jz_gpio_disable_pullup); - -static int jz_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -{ - return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio)); -} - -static void jz_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -{ - uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET); - reg += !value; - writel(BIT(gpio), reg); -} - -static int jz_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, - int value) -{ - writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET)); - jz_gpio_set_value(chip, gpio, value); - - return 0; -} - -static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR)); - - return 0; -} - -static int jz_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -{ - struct jz_gpio_chip *jz_gpio = gpiochip_get_data(chip); - - return jz_gpio->irq_base + gpio; -} - -int jz_gpio_port_direction_input(int port, uint32_t mask) -{ - writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR)); - - return 0; -} -EXPORT_SYMBOL(jz_gpio_port_direction_input); - -int jz_gpio_port_direction_output(int port, uint32_t mask) -{ - writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_SET)); - - return 0; -} -EXPORT_SYMBOL(jz_gpio_port_direction_output); - -void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask) -{ - writel(~value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_CLEAR)); - writel(value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_SET)); -} -EXPORT_SYMBOL(jz_gpio_port_set_value); - -uint32_t jz_gpio_port_get_value(int port, uint32_t mask) -{ - uint32_t value = readl(GPIO_TO_REG(port, JZ_REG_GPIO_PIN)); - - return value & mask; -} -EXPORT_SYMBOL(jz_gpio_port_get_value); - -#define IRQ_TO_BIT(irq) BIT((irq - JZ4740_IRQ_GPIO(0)) & 0x1f) - -static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq) -{ - uint32_t value; - void __iomem *reg; - uint32_t mask = IRQ_TO_BIT(irq); - - if (!(chip->edge_trigger_both & mask)) - return; - - reg = chip->base; - - value = readl(chip->base + JZ_REG_GPIO_PIN); - if (value & mask) - reg += JZ_REG_GPIO_DIRECTION_CLEAR; - else - reg += JZ_REG_GPIO_DIRECTION_SET; - - writel(mask, reg); -} - -static void jz_gpio_irq_demux_handler(struct irq_desc *desc) -{ - uint32_t flag; - unsigned int gpio_irq; - struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc); - - flag = readl(chip->base + JZ_REG_GPIO_FLAG); - if (!flag) - return; - - gpio_irq = chip->irq_base + __fls(flag); - - jz_gpio_check_trigger_both(chip, gpio_irq); - - generic_handle_irq(gpio_irq); -}; - -static inline void jz_gpio_set_irq_bit(struct irq_data *data, unsigned int reg) -{ - struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); - writel(IRQ_TO_BIT(data->irq), chip->base + reg); -} - -static void jz_gpio_irq_unmask(struct irq_data *data) -{ - struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); - - jz_gpio_check_trigger_both(chip, data->irq); - irq_gc_unmask_enable_reg(data); -}; - -/* TODO: Check if function is gpio */ -static unsigned int jz_gpio_irq_startup(struct irq_data *data) -{ - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_SET); - jz_gpio_irq_unmask(data); - return 0; -} - -static void jz_gpio_irq_shutdown(struct irq_data *data) -{ - irq_gc_mask_disable_reg(data); - - /* Set direction to input */ - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR); - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR); -} - -static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type) -{ - struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); - unsigned int irq = data->irq; - - if (flow_type == IRQ_TYPE_EDGE_BOTH) { - uint32_t value = readl(chip->base + JZ_REG_GPIO_PIN); - if (value & IRQ_TO_BIT(irq)) - flow_type = IRQ_TYPE_EDGE_FALLING; - else - flow_type = IRQ_TYPE_EDGE_RISING; - chip->edge_trigger_both |= IRQ_TO_BIT(irq); - } else { - chip->edge_trigger_both &= ~IRQ_TO_BIT(irq); - } - - switch (flow_type) { - case IRQ_TYPE_EDGE_RISING: - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_SET); - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_SET); - break; - case IRQ_TYPE_EDGE_FALLING: - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR); - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_SET); - break; - case IRQ_TYPE_LEVEL_HIGH: - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_SET); - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_CLEAR); - break; - case IRQ_TYPE_LEVEL_LOW: - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR); - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_CLEAR); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on) -{ - struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); - - irq_gc_set_wake(data, on); - irq_set_irq_wake(chip->irq, on); - - return 0; -} - -#define JZ4740_GPIO_CHIP(_bank) { \ - .irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \ - .gpio_chip = { \ - .label = "Bank " # _bank, \ - .owner = THIS_MODULE, \ - .set = jz_gpio_set_value, \ - .get = jz_gpio_get_value, \ - .direction_output = jz_gpio_direction_output, \ - .direction_input = jz_gpio_direction_input, \ - .to_irq = jz_gpio_to_irq, \ - .base = JZ4740_GPIO_BASE_ ## _bank, \ - .ngpio = JZ4740_GPIO_NUM_ ## _bank, \ - }, \ -} - -static struct jz_gpio_chip jz4740_gpio_chips[] = { - JZ4740_GPIO_CHIP(A), - JZ4740_GPIO_CHIP(B), - JZ4740_GPIO_CHIP(C), - JZ4740_GPIO_CHIP(D), -}; - -static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100); - - chip->irq = JZ4740_IRQ_INTC_GPIO(id); - irq_set_chained_handler_and_data(chip->irq, - jz_gpio_irq_demux_handler, chip); - - gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base, - chip->base, handle_level_irq); - - gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio); - gc->private = chip; - - ct = gc->chip_types; - ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR; - ct->regs.disable = JZ_REG_GPIO_MASK_SET; - ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR; - - ct->chip.name = "GPIO"; - ct->chip.irq_mask = irq_gc_mask_disable_reg; - ct->chip.irq_unmask = jz_gpio_irq_unmask; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_suspend = ingenic_intc_irq_suspend; - ct->chip.irq_resume = ingenic_intc_irq_resume; - ct->chip.irq_startup = jz_gpio_irq_startup; - ct->chip.irq_shutdown = jz_gpio_irq_shutdown; - ct->chip.irq_set_type = jz_gpio_irq_set_type; - ct->chip.irq_set_wake = jz_gpio_irq_set_wake; - ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; - - irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio), - IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL); - - gpiochip_add_data(&chip->gpio_chip, chip); -} - -static int __init jz4740_gpio_init(void) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i) - jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i); - - printk(KERN_INFO "JZ4740 GPIO initialized\n"); - - return 0; -} -arch_initcall(jz4740_gpio_init); - -#ifdef CONFIG_DEBUG_FS - -static inline void gpio_seq_reg(struct seq_file *s, struct jz_gpio_chip *chip, - const char *name, unsigned int reg) -{ - seq_printf(s, "\t%s: %08x\n", name, readl(chip->base + reg)); -} - -static int gpio_regs_show(struct seq_file *s, void *unused) -{ - struct jz_gpio_chip *chip = jz4740_gpio_chips; - int i; - - for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i, ++chip) { - seq_printf(s, "==GPIO %d==\n", i); - gpio_seq_reg(s, chip, "Pin", JZ_REG_GPIO_PIN); - gpio_seq_reg(s, chip, "Data", JZ_REG_GPIO_DATA); - gpio_seq_reg(s, chip, "Mask", JZ_REG_GPIO_MASK); - gpio_seq_reg(s, chip, "Pull", JZ_REG_GPIO_PULL); - gpio_seq_reg(s, chip, "Func", JZ_REG_GPIO_FUNC); - gpio_seq_reg(s, chip, "Select", JZ_REG_GPIO_SELECT); - gpio_seq_reg(s, chip, "Direction", JZ_REG_GPIO_DIRECTION); - gpio_seq_reg(s, chip, "Trigger", JZ_REG_GPIO_TRIGGER); - gpio_seq_reg(s, chip, "Flag", JZ_REG_GPIO_FLAG); - } - - return 0; -} - -static int gpio_regs_open(struct inode *inode, struct file *file) -{ - return single_open(file, gpio_regs_show, NULL); -} - -static const struct file_operations gpio_regs_operations = { - .open = gpio_regs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init gpio_debugfs_init(void) -{ - (void) debugfs_create_file("jz_regs_gpio", S_IFREG | S_IRUGO, - NULL, NULL, &gpio_regs_operations); - return 0; -} -subsys_initcall(gpio_debugfs_init); - -#endif