github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-10 07:32:29 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

xen/pciback: Fix proper FLR steps.

Browse Source 
commit 80ba77dfbc upstream.

When we do FLR and save PCI config we did it in the wrong order.
The end result was that if a PCI device was unbind from
its driver, then binded to xen-pciback, and then back to its
driver we would get:

> lspci -s 04:00.0
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
13:42:12 # 4 :~/
> echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind
> modprobe e1000e
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s L1
e1000e 0000:04:00.0: enabling device (0000 -> 0002)
xen: registering gsi 48 triggering 0 polarity 1
Already setup the GSI :48
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e: probe of 0000:04:00.0 failed with error -2

This fixes it by first saving the PCI configuration space, then
doing the FLR.

Reported-by: Ren, Yongjie <yongjie.ren@intel.com>
Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Konrad Rzeszutek Wilk 2012-09-05 16:35:20 -04:00 committed by Greg Kroah-Hartman
parent 095ac020be
commit bbebafa0d9
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/xen/xen-pciback/pci_stub.c
View File

@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
if (err)
goto config_release;
dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
__pci_reset_function_locked(dev);
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
dev_data->pci_saved_state = pci_store_saved_state(dev);
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
else {
dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
__pci_reset_function_locked(dev);
}
/* Now disable the device (this also ensures some private device
* data is setup before we export)
*/