mirror of
https://github.com/torvalds/linux.git
synced 2026-05-22 22:22:08 +02:00
phy: rockchip-naneng-combo: add rk3576 support
Rockchip RK3576 integrates two naneng-combo PHY, PHY0 is used for PCIE and SATA, PHY1 is used for PCIE, SATA and USB3. This adds device specific data support. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Test-by: Kever Yang <kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20241106021357.19782-2-frawang.cn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Kever Yang
Vinod Koul
parent
b136e9928d
commit
ba8ad7eece
|
|
@ -37,6 +37,10 @@
|
|||
#define PHYREG8 0x1C
|
||||
#define PHYREG8_SSC_EN BIT(4)
|
||||
|
||||
#define PHYREG10 0x24
|
||||
#define PHYREG10_SSC_PCM_MASK GENMASK(3, 0)
|
||||
#define PHYREG10_SSC_PCM_3500PPM 7
|
||||
|
||||
#define PHYREG11 0x28
|
||||
#define PHYREG11_SU_TRIM_0_7 0xF0
|
||||
|
||||
|
|
@ -61,17 +65,26 @@
|
|||
#define PHYREG16 0x3C
|
||||
#define PHYREG16_SSC_CNT_VALUE 0x5f
|
||||
|
||||
#define PHYREG17 0x40
|
||||
|
||||
#define PHYREG18 0x44
|
||||
#define PHYREG18_PLL_LOOP 0x32
|
||||
|
||||
#define PHYREG21 0x50
|
||||
#define PHYREG21_RX_SQUELCH_VAL 0x0D
|
||||
|
||||
#define PHYREG27 0x6C
|
||||
#define PHYREG27_RX_TRIM_RK3588 0x4C
|
||||
|
||||
#define PHYREG30 0x74
|
||||
|
||||
#define PHYREG32 0x7C
|
||||
#define PHYREG32_SSC_MASK GENMASK(7, 4)
|
||||
#define PHYREG32_SSC_DIR_MASK GENMASK(5, 4)
|
||||
#define PHYREG32_SSC_DIR_SHIFT 4
|
||||
#define PHYREG32_SSC_UPWARD 0
|
||||
#define PHYREG32_SSC_DOWNWARD 1
|
||||
#define PHYREG32_SSC_OFFSET_MASK GENMASK(7, 6)
|
||||
#define PHYREG32_SSC_OFFSET_SHIFT 6
|
||||
#define PHYREG32_SSC_OFFSET_500PPM 1
|
||||
|
||||
|
|
@ -79,6 +92,7 @@
|
|||
#define PHYREG33_PLL_KVCO_MASK GENMASK(4, 2)
|
||||
#define PHYREG33_PLL_KVCO_SHIFT 2
|
||||
#define PHYREG33_PLL_KVCO_VALUE 2
|
||||
#define PHYREG33_PLL_KVCO_VALUE_RK3576 4
|
||||
|
||||
struct rockchip_combphy_priv;
|
||||
|
||||
|
|
@ -98,6 +112,7 @@ struct rockchip_combphy_grfcfg {
|
|||
struct combphy_reg pipe_rxterm_set;
|
||||
struct combphy_reg pipe_txelec_set;
|
||||
struct combphy_reg pipe_txcomp_set;
|
||||
struct combphy_reg pipe_clk_24m;
|
||||
struct combphy_reg pipe_clk_25m;
|
||||
struct combphy_reg pipe_clk_100m;
|
||||
struct combphy_reg pipe_phymode_sel;
|
||||
|
|
@ -584,6 +599,266 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
|
|||
.combphy_cfg = rk3568_combphy_cfg,
|
||||
};
|
||||
|
||||
static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv)
|
||||
{
|
||||
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
||||
unsigned long rate;
|
||||
u32 val;
|
||||
|
||||
switch (priv->type) {
|
||||
case PHY_TYPE_PCIE:
|
||||
/* Set SSC downward spread spectrum */
|
||||
val = FIELD_PREP(PHYREG32_SSC_MASK, PHYREG32_SSC_DOWNWARD);
|
||||
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
|
||||
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
|
||||
break;
|
||||
|
||||
case PHY_TYPE_USB3:
|
||||
/* Set SSC downward spread spectrum */
|
||||
val = FIELD_PREP(PHYREG32_SSC_MASK, PHYREG32_SSC_DOWNWARD);
|
||||
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
|
||||
|
||||
/* Enable adaptive CTLE for USB3.0 Rx */
|
||||
val = readl(priv->mmio + PHYREG15);
|
||||
val |= PHYREG15_CTLE_EN;
|
||||
writel(val, priv->mmio + PHYREG15);
|
||||
|
||||
/* Set PLL KVCO fine tuning signals */
|
||||
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK, BIT(3), PHYREG33);
|
||||
|
||||
/* Set PLL LPF R1 to su_trim[10:7]=1001 */
|
||||
writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
|
||||
|
||||
/* Set PLL input clock divider 1/2 */
|
||||
val = FIELD_PREP(PHYREG6_PLL_DIV_MASK, PHYREG6_PLL_DIV_2);
|
||||
rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK, val, PHYREG6);
|
||||
|
||||
/* Set PLL loop divider */
|
||||
writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
|
||||
|
||||
/* Set PLL KVCO to min and set PLL charge pump current to max */
|
||||
writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
|
||||
|
||||
/* Set Rx squelch input filler bandwidth */
|
||||
writel(PHYREG21_RX_SQUELCH_VAL, priv->mmio + PHYREG21);
|
||||
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
|
||||
break;
|
||||
|
||||
case PHY_TYPE_SATA:
|
||||
/* Enable adaptive CTLE for SATA Rx */
|
||||
val = readl(priv->mmio + PHYREG15);
|
||||
val |= PHYREG15_CTLE_EN;
|
||||
writel(val, priv->mmio + PHYREG15);
|
||||
|
||||
/* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */
|
||||
val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
|
||||
val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
|
||||
writel(val, priv->mmio + PHYREG7);
|
||||
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
|
||||
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
|
||||
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
|
||||
break;
|
||||
|
||||
default:
|
||||
dev_err(priv->dev, "incompatible PHY type\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rate = clk_get_rate(priv->refclk);
|
||||
|
||||
switch (rate) {
|
||||
case REF_CLOCK_24MHz:
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true);
|
||||
if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
|
||||
/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */
|
||||
val = FIELD_PREP(PHYREG15_SSC_CNT_MASK, PHYREG15_SSC_CNT_VALUE);
|
||||
rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
|
||||
val, PHYREG15);
|
||||
|
||||
writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
|
||||
} else if (priv->type == PHY_TYPE_PCIE) {
|
||||
/* PLL KVCO tuning fine */
|
||||
val = FIELD_PREP(PHYREG33_PLL_KVCO_MASK, PHYREG33_PLL_KVCO_VALUE_RK3576);
|
||||
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
||||
val, PHYREG33);
|
||||
|
||||
/* Set up rx_pck invert and rx msb to disable */
|
||||
writel(0x00, priv->mmio + PHYREG27);
|
||||
|
||||
/*
|
||||
* Set up SU adjust signal:
|
||||
* su_trim[7:0], PLL KVCO adjust bits[2:0] to min
|
||||
* su_trim[15:8], PLL LPF R1 adujst bits[9:7]=3'b011
|
||||
* su_trim[31:24], CKDRV adjust
|
||||
*/
|
||||
writel(0x90, priv->mmio + PHYREG11);
|
||||
writel(0x02, priv->mmio + PHYREG12);
|
||||
writel(0x57, priv->mmio + PHYREG14);
|
||||
|
||||
writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
|
||||
}
|
||||
break;
|
||||
|
||||
case REF_CLOCK_25MHz:
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
|
||||
break;
|
||||
|
||||
case REF_CLOCK_100MHz:
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
|
||||
if (priv->type == PHY_TYPE_PCIE) {
|
||||
/* gate_tx_pck_sel length select work for L1SS */
|
||||
writel(0xc0, priv->mmio + PHYREG30);
|
||||
|
||||
/* PLL KVCO tuning fine */
|
||||
val = FIELD_PREP(PHYREG33_PLL_KVCO_MASK, PHYREG33_PLL_KVCO_VALUE_RK3576);
|
||||
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
||||
val, PHYREG33);
|
||||
|
||||
/* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
|
||||
writel(0x4c, priv->mmio + PHYREG27);
|
||||
|
||||
/*
|
||||
* Set up SU adjust signal:
|
||||
* su_trim[7:0], PLL KVCO adjust bits[2:0] to min
|
||||
* su_trim[15:8], bypass PLL loop divider code, and
|
||||
* PLL LPF R1 adujst bits[9:7]=3'b101
|
||||
* su_trim[23:16], CKRCV adjust
|
||||
* su_trim[31:24], CKDRV adjust
|
||||
*/
|
||||
writel(0x90, priv->mmio + PHYREG11);
|
||||
writel(0x43, priv->mmio + PHYREG12);
|
||||
writel(0x88, priv->mmio + PHYREG13);
|
||||
writel(0x56, priv->mmio + PHYREG14);
|
||||
} else if (priv->type == PHY_TYPE_SATA) {
|
||||
/* downward spread spectrum +500ppm */
|
||||
val = FIELD_PREP(PHYREG32_SSC_DIR_MASK, PHYREG32_SSC_DOWNWARD);
|
||||
val |= FIELD_PREP(PHYREG32_SSC_OFFSET_MASK, PHYREG32_SSC_OFFSET_500PPM);
|
||||
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
|
||||
|
||||
/* ssc ppm adjust to 3500ppm */
|
||||
rockchip_combphy_updatel(priv, PHYREG10_SSC_PCM_MASK,
|
||||
PHYREG10_SSC_PCM_3500PPM,
|
||||
PHYREG10);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (priv->ext_refclk) {
|
||||
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
|
||||
if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
|
||||
val = FIELD_PREP(PHYREG33_PLL_KVCO_MASK, PHYREG33_PLL_KVCO_VALUE_RK3576);
|
||||
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
||||
val, PHYREG33);
|
||||
|
||||
/* Set up rx_trim: PLL LPF C1 85pf R1 2.5kohm */
|
||||
writel(0x0c, priv->mmio + PHYREG27);
|
||||
|
||||
/*
|
||||
* Set up SU adjust signal:
|
||||
* su_trim[7:0], PLL KVCO adjust bits[2:0] to min
|
||||
* su_trim[15:8], bypass PLL loop divider code, and
|
||||
* PLL LPF R1 adujst bits[9:7]=3'b101.
|
||||
* su_trim[23:16], CKRCV adjust
|
||||
* su_trim[31:24], CKDRV adjust
|
||||
*/
|
||||
writel(0x90, priv->mmio + PHYREG11);
|
||||
writel(0x43, priv->mmio + PHYREG12);
|
||||
writel(0x88, priv->mmio + PHYREG13);
|
||||
writel(0x56, priv->mmio + PHYREG14);
|
||||
}
|
||||
}
|
||||
|
||||
if (priv->enable_ssc) {
|
||||
val = readl(priv->mmio + PHYREG8);
|
||||
val |= PHYREG8_SSC_EN;
|
||||
writel(val, priv->mmio + PHYREG8);
|
||||
|
||||
if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) {
|
||||
/* Set PLL loop divider */
|
||||
writel(0x00, priv->mmio + PHYREG17);
|
||||
writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
|
||||
|
||||
/* Set up rx_pck invert and rx msb to disable */
|
||||
writel(0x00, priv->mmio + PHYREG27);
|
||||
|
||||
/*
|
||||
* Set up SU adjust signal:
|
||||
* su_trim[7:0], PLL KVCO adjust bits[2:0] to min
|
||||
* su_trim[15:8], PLL LPF R1 adujst bits[9:7]=3'b101
|
||||
* su_trim[23:16], CKRCV adjust
|
||||
* su_trim[31:24], CKDRV adjust
|
||||
*/
|
||||
writel(0x90, priv->mmio + PHYREG11);
|
||||
writel(0x02, priv->mmio + PHYREG12);
|
||||
writel(0x08, priv->mmio + PHYREG13);
|
||||
writel(0x57, priv->mmio + PHYREG14);
|
||||
writel(0x40, priv->mmio + PHYREG15);
|
||||
|
||||
writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
|
||||
|
||||
val = FIELD_PREP(PHYREG33_PLL_KVCO_MASK, PHYREG33_PLL_KVCO_VALUE_RK3576);
|
||||
writel(val, priv->mmio + PHYREG33);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = {
|
||||
/* pipe-phy-grf */
|
||||
.pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 },
|
||||
.usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 },
|
||||
.pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 },
|
||||
.pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 },
|
||||
.pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 },
|
||||
.pipe_clk_24m = { 0x0004, 14, 13, 0x00, 0x00 },
|
||||
.pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 },
|
||||
.pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 },
|
||||
.pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 },
|
||||
.pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 },
|
||||
.pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 },
|
||||
.pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 },
|
||||
.pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 },
|
||||
.pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 },
|
||||
.pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 },
|
||||
.con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 },
|
||||
.con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 },
|
||||
.con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 },
|
||||
.con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 },
|
||||
.con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 },
|
||||
.con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 },
|
||||
.con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 },
|
||||
.con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 },
|
||||
/* php-grf */
|
||||
.pipe_con0_for_sata = { 0x001C, 2, 0, 0x00, 0x2 },
|
||||
.pipe_con1_for_sata = { 0x0020, 2, 0, 0x00, 0x2 },
|
||||
};
|
||||
|
||||
static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = {
|
||||
.num_phys = 2,
|
||||
.phy_ids = {
|
||||
0x2b050000,
|
||||
0x2b060000
|
||||
},
|
||||
.grfcfg = &rk3576_combphy_grfcfgs,
|
||||
.combphy_cfg = rk3576_combphy_cfg,
|
||||
};
|
||||
|
||||
static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
|
||||
{
|
||||
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
||||
|
|
@ -775,6 +1050,10 @@ static const struct of_device_id rockchip_combphy_of_match[] = {
|
|||
.compatible = "rockchip,rk3568-naneng-combphy",
|
||||
.data = &rk3568_combphy_cfgs,
|
||||
},
|
||||
{
|
||||
.compatible = "rockchip,rk3576-naneng-combphy",
|
||||
.data = &rk3576_combphy_cfgs,
|
||||
},
|
||||
{
|
||||
.compatible = "rockchip,rk3588-naneng-combphy",
|
||||
.data = &rk3588_combphy_cfgs,
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user