From 4598380f9c548aa161eb4e990a1583f0a7d1e0d7 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 6 Apr 2023 16:23:50 +0800 Subject: [PATCH 1/3] bonding: fix ns validation on backup slaves When arp_validate is set to 2, 3, or 6, validation is performed for backup slaves as well. As stated in the bond documentation, validation involves checking the broadcast ARP request sent out via the active slave. This helps determine which slaves are more likely to function in the event of an active slave failure. However, when the target is an IPv6 address, the NS message sent from the active interface is not checked on backup slaves. Additionally, based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr when checking the NS message. Note that when checking the NS message, the destination address is a multicast address. Therefore, we must convert the target address to solicited multicast in the bond_get_targets_ip6() function. Prior to the fix, the backup slaves had a mii status of "down", but after the fix, all of the slaves' mii status was updated to "UP". Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reviewed-by: Jonathan Toppins Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++-- include/net/bonding.h | 8 ++++++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 236e5219c811..8cc9a74789b7 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3269,7 +3269,8 @@ static int bond_na_rcv(const struct sk_buff *skb, struct bonding *bond, combined = skb_header_pointer(skb, 0, sizeof(_combined), &_combined); if (!combined || combined->ip6.nexthdr != NEXTHDR_ICMP || - combined->icmp6.icmp6_type != NDISC_NEIGHBOUR_ADVERTISEMENT) + (combined->icmp6.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION && + combined->icmp6.icmp6_type != NDISC_NEIGHBOUR_ADVERTISEMENT)) goto out; saddr = &combined->ip6.saddr; @@ -3291,7 +3292,7 @@ static int bond_na_rcv(const struct sk_buff *skb, struct bonding *bond, else if (curr_active_slave && time_after(slave_last_rx(bond, curr_active_slave), curr_active_slave->last_link_up)) - bond_validate_na(bond, slave, saddr, daddr); + bond_validate_na(bond, slave, daddr, saddr); else if (curr_arp_slave && bond_time_in_interval(bond, slave_last_tx(curr_arp_slave), 1)) bond_validate_na(bond, slave, saddr, daddr); diff --git a/include/net/bonding.h b/include/net/bonding.h index ea36ab7f9e72..c3843239517d 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -761,13 +761,17 @@ static inline int bond_get_targets_ip(__be32 *targets, __be32 ip) #if IS_ENABLED(CONFIG_IPV6) static inline int bond_get_targets_ip6(struct in6_addr *targets, struct in6_addr *ip) { + struct in6_addr mcaddr; int i; - for (i = 0; i < BOND_MAX_NS_TARGETS; i++) - if (ipv6_addr_equal(&targets[i], ip)) + for (i = 0; i < BOND_MAX_NS_TARGETS; i++) { + addrconf_addr_solict_mult(&targets[i], &mcaddr); + if ((ipv6_addr_equal(&targets[i], ip)) || + (ipv6_addr_equal(&mcaddr, ip))) return i; else if (ipv6_addr_any(&targets[i])) break; + } return -1; } From 481b56e0391ea46d6bf1a2604422a21063615901 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 6 Apr 2023 16:23:51 +0800 Subject: [PATCH 2/3] selftests: bonding: re-format bond option tests To improve the testing process for bond options, A new bond topology lib is added to our testing setup. The current option_prio.sh file will be renamed to bond_options.sh so that all bonding options can be tested here. Specifically, for priority testing, we will run all tests using modes 1, 5, and 6. These changes will help us streamline the testing process and ensure that our bond options are rigorously evaluated. Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Acked-by: Jonathan Toppins Signed-off-by: David S. Miller --- .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_options.sh | 209 +++++++++++++++ .../drivers/net/bonding/bond_topo_3d1c.sh | 143 ++++++++++ .../drivers/net/bonding/option_prio.sh | 245 ------------------ 4 files changed, 354 insertions(+), 246 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_options.sh create mode 100644 tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh delete mode 100755 tools/testing/selftests/drivers/net/bonding/option_prio.sh diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index a39bb2560d9b..03f92d7aeb19 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -8,11 +8,12 @@ TEST_PROGS := \ dev_addr_lists.sh \ mode-1-recovery-updelay.sh \ mode-2-recovery-updelay.sh \ - option_prio.sh \ + bond_options.sh \ bond-eth-type-change.sh TEST_FILES := \ lag_lib.sh \ + bond_topo_3d1c.sh \ net_forwarding_lib.sh include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh new file mode 100755 index 000000000000..7213211d0bde --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -0,0 +1,209 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test bonding options with mode 1,5,6 + +ALL_TESTS=" + prio +" + +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source ${lib_dir}/net_forwarding_lib.sh +source ${lib_dir}/bond_topo_3d1c.sh + +skip_prio() +{ + local skip=1 + + # check if iproute support prio option + ip -n ${s_ns} link set eth0 type bond_slave prio 10 + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support prio option + ip -n ${s_ns} -d link show eth0 | grep -q "prio 10" + [[ $? -ne 0 ]] && skip=0 + + return $skip +} + +skip_ns() +{ + local skip=1 + + # check if iproute support ns_ip6_target option + ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6} + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support ns_ip6_target option + ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}" + [[ $? -ne 0 ]] && skip=0 + + ip -n ${s_ns} link del bond1 + + return $skip +} + +active_slave="" +check_active_slave() +{ + local target_active_slave=$1 + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + test "$active_slave" = "$target_active_slave" + check_err $? "Current active slave is $active_slave but not $target_active_slave" +} + + +# Test bonding prio option +prio_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + + # check bonding member prio value + ip -n ${s_ns} link set eth0 type bond_slave prio 0 + ip -n ${s_ns} link set eth1 type bond_slave prio 10 + ip -n ${s_ns} link set eth2 type bond_slave prio 11 + cmd_jq "ip -n ${s_ns} -d -j link show eth0" \ + ".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null + check_err $? "eth0 prio is not 0" + cmd_jq "ip -n ${s_ns} -d -j link show eth1" \ + ".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null + check_err $? "eth1 prio is not 10" + cmd_jq "ip -n ${s_ns} -d -j link show eth2" \ + ".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null + check_err $? "eth2 prio is not 11" + + bond_check_connection "setup" + + # active slave should be the primary slave + check_active_slave eth1 + + # active slave should be the higher prio slave + ip -n ${s_ns} link set $active_slave down + bond_check_connection "fail over" + check_active_slave eth2 + + # when only 1 slave is up + ip -n ${s_ns} link set $active_slave down + bond_check_connection "only 1 slave up" + check_active_slave eth0 + + # when a higher prio slave change to up + ip -n ${s_ns} link set eth2 up + bond_check_connection "higher prio slave up" + case $primary_reselect in + "0") + check_active_slave "eth2" + ;; + "1") + check_active_slave "eth0" + ;; + "2") + check_active_slave "eth0" + ;; + esac + local pre_active_slave=$active_slave + + # when the primary slave change to up + ip -n ${s_ns} link set eth1 up + bond_check_connection "primary slave up" + case $primary_reselect in + "0") + check_active_slave "eth1" + ;; + "1") + check_active_slave "$pre_active_slave" + ;; + "2") + check_active_slave "$pre_active_slave" + ip -n ${s_ns} link set $active_slave down + bond_check_connection "pre_active slave down" + check_active_slave "eth1" + ;; + esac + + # Test changing bond slave prio + if [[ "$primary_reselect" == "0" ]];then + ip -n ${s_ns} link set eth0 type bond_slave prio 1000000 + ip -n ${s_ns} link set eth1 type bond_slave prio 0 + ip -n ${s_ns} link set eth2 type bond_slave prio -50 + ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000' + check_err $? "eth0 prio is not 1000000" + ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0' + check_err $? "eth1 prio is not 0" + ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50' + check_err $? "eth3 prio is not -50" + check_active_slave "eth1" + + ip -n ${s_ns} link set $active_slave down + bond_check_connection "change slave prio" + check_active_slave "eth0" + fi +} + +prio_miimon() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode miimon primary_reselect $primary_reselect" + done +} + +prio_arp() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode active-backup arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect" + done +} + +prio_ns() +{ + local primary_reselect + local mode=$1 + + if skip_ns; then + log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for primary_reselect in 0 1 2; do + prio_test "mode active-backup arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect" + done +} + +prio() +{ + local mode modes="active-backup balance-tlb balance-alb" + + if skip_prio; then + log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'." + return 0 + fi + + for mode in $modes; do + prio_miimon $mode + prio_arp $mode + prio_ns $mode + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh new file mode 100644 index 000000000000..4045ca97fb22 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh @@ -0,0 +1,143 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Topology for Bond mode 1,5,6 testing +# +# +-------------------------------------+ +# | bond0 | +# | + | Server +# | eth0 | eth1 eth2 | 192.0.2.1/24 +# | +-------------------+ | 2001:db8::1/24 +# | | | | | +# +-------------------------------------+ +# | | | +# +-------------------------------------+ +# | | | | | +# | +---+---------+---------+---+ | Gateway +# | | br0 | | 192.0.2.254/24 +# | +-------------+-------------+ | 2001:db8::254/24 +# | | | +# +-------------------------------------+ +# | +# +-------------------------------------+ +# | | | Client +# | + | 192.0.2.10/24 +# | eth0 | 2001:db8::10/24 +# +-------------------------------------+ + +s_ns="s-$(mktemp -u XXXXXX)" +c_ns="c-$(mktemp -u XXXXXX)" +g_ns="g-$(mktemp -u XXXXXX)" +s_ip4="192.0.2.1" +c_ip4="192.0.2.10" +g_ip4="192.0.2.254" +s_ip6="2001:db8::1" +c_ip6="2001:db8::10" +g_ip6="2001:db8::254" + +gateway_create() +{ + ip netns add ${g_ns} + ip -n ${g_ns} link add br0 type bridge + ip -n ${g_ns} link set br0 up + ip -n ${g_ns} addr add ${g_ip4}/24 dev br0 + ip -n ${g_ns} addr add ${g_ip6}/24 dev br0 +} + +gateway_destroy() +{ + ip -n ${g_ns} link del br0 + ip netns del ${g_ns} +} + +server_create() +{ + ip netns add ${s_ns} + ip -n ${s_ns} link add bond0 type bond mode active-backup miimon 100 + + for i in $(seq 0 2); do + ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + + ip -n ${g_ns} link set s${i} up + ip -n ${g_ns} link set s${i} master br0 + ip -n ${s_ns} link set eth${i} master bond0 + done + + ip -n ${s_ns} link set bond0 up + ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0 + ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0 + sleep 2 +} + +# Reset bond with new mode and options +bond_reset() +{ + local param="$1" + + ip -n ${s_ns} link set bond0 down + ip -n ${s_ns} link del bond0 + + ip -n ${s_ns} link add bond0 type bond $param + for i in $(seq 0 2); do + ip -n ${s_ns} link set eth$i master bond0 + done + + ip -n ${s_ns} link set bond0 up + ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0 + ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0 + sleep 2 +} + +server_destroy() +{ + for i in $(seq 0 2); do + ip -n ${s_ns} link del eth${i} + done + ip netns del ${s_ns} +} + +client_create() +{ + ip netns add ${c_ns} + ip -n ${c_ns} link add eth0 type veth peer name c0 netns ${g_ns} + + ip -n ${g_ns} link set c0 up + ip -n ${g_ns} link set c0 master br0 + + ip -n ${c_ns} link set eth0 up + ip -n ${c_ns} addr add ${c_ip4}/24 dev eth0 + ip -n ${c_ns} addr add ${c_ip6}/24 dev eth0 +} + +client_destroy() +{ + ip -n ${c_ns} link del eth0 + ip netns del ${c_ns} +} + +setup_prepare() +{ + gateway_create + server_create + client_create +} + +cleanup() +{ + pre_cleanup + + client_destroy + server_destroy + gateway_destroy +} + +bond_check_connection() +{ + local msg=${1:-"check connection"} + + sleep 2 + ip netns exec ${s_ns} ping ${c_ip4} -c5 -i 0.1 &>/dev/null + check_err $? "${msg}: ping failed" + ip netns exec ${s_ns} ping6 ${c_ip6} -c5 -i 0.1 &>/dev/null + check_err $? "${msg}: ping6 failed" +} diff --git a/tools/testing/selftests/drivers/net/bonding/option_prio.sh b/tools/testing/selftests/drivers/net/bonding/option_prio.sh deleted file mode 100755 index c32eebff5005..000000000000 --- a/tools/testing/selftests/drivers/net/bonding/option_prio.sh +++ /dev/null @@ -1,245 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Test bonding option prio -# - -ALL_TESTS=" - prio_arp_ip_target_test - prio_miimon_test -" - -REQUIRE_MZ=no -REQUIRE_JQ=no -NUM_NETIFS=0 -lib_dir=$(dirname "$0") -source "$lib_dir"/net_forwarding_lib.sh - -destroy() -{ - ip link del bond0 &>/dev/null - ip link del br0 &>/dev/null - ip link del veth0 &>/dev/null - ip link del veth1 &>/dev/null - ip link del veth2 &>/dev/null - ip netns del ns1 &>/dev/null - ip link del veth3 &>/dev/null -} - -cleanup() -{ - pre_cleanup - - destroy -} - -skip() -{ - local skip=1 - ip link add name bond0 type bond mode 1 miimon 100 &>/dev/null - ip link add name veth0 type veth peer name veth0_p - ip link set veth0 master bond0 - - # check if iproute support prio option - ip link set dev veth0 type bond_slave prio 10 - [[ $? -ne 0 ]] && skip=0 - - # check if bonding support prio option - ip -d link show veth0 | grep -q "prio 10" - [[ $? -ne 0 ]] && skip=0 - - ip link del bond0 &>/dev/null - ip link del veth0 - - return $skip -} - -active_slave="" -check_active_slave() -{ - local target_active_slave=$1 - active_slave="$(cat /sys/class/net/bond0/bonding/active_slave)" - test "$active_slave" = "$target_active_slave" - check_err $? "Current active slave is $active_slave but not $target_active_slave" -} - - -# Test bonding prio option with mode=$mode monitor=$monitor -# and primary_reselect=$primary_reselect -prio_test() -{ - RET=0 - - local monitor=$1 - local mode=$2 - local primary_reselect=$3 - - local bond_ip4="192.169.1.2" - local peer_ip4="192.169.1.1" - local bond_ip6="2009:0a:0b::02" - local peer_ip6="2009:0a:0b::01" - - - # create veths - ip link add name veth0 type veth peer name veth0_p - ip link add name veth1 type veth peer name veth1_p - ip link add name veth2 type veth peer name veth2_p - - # create bond - if [[ "$monitor" == "miimon" ]];then - ip link add name bond0 type bond mode $mode miimon 100 primary veth1 primary_reselect $primary_reselect - elif [[ "$monitor" == "arp_ip_target" ]];then - ip link add name bond0 type bond mode $mode arp_interval 1000 arp_ip_target $peer_ip4 primary veth1 primary_reselect $primary_reselect - elif [[ "$monitor" == "ns_ip6_target" ]];then - ip link add name bond0 type bond mode $mode arp_interval 1000 ns_ip6_target $peer_ip6 primary veth1 primary_reselect $primary_reselect - fi - ip link set bond0 up - ip link set veth0 master bond0 - ip link set veth1 master bond0 - ip link set veth2 master bond0 - # check bonding member prio value - ip link set dev veth0 type bond_slave prio 0 - ip link set dev veth1 type bond_slave prio 10 - ip link set dev veth2 type bond_slave prio 11 - ip -d link show veth0 | grep -q 'prio 0' - check_err $? "veth0 prio is not 0" - ip -d link show veth1 | grep -q 'prio 10' - check_err $? "veth0 prio is not 10" - ip -d link show veth2 | grep -q 'prio 11' - check_err $? "veth0 prio is not 11" - - ip link set veth0 up - ip link set veth1 up - ip link set veth2 up - ip link set veth0_p up - ip link set veth1_p up - ip link set veth2_p up - - # prepare ping target - ip link add name br0 type bridge - ip link set br0 up - ip link set veth0_p master br0 - ip link set veth1_p master br0 - ip link set veth2_p master br0 - ip link add name veth3 type veth peer name veth3_p - ip netns add ns1 - ip link set veth3_p master br0 up - ip link set veth3 netns ns1 up - ip netns exec ns1 ip addr add $peer_ip4/24 dev veth3 - ip netns exec ns1 ip addr add $peer_ip6/64 dev veth3 - ip addr add $bond_ip4/24 dev bond0 - ip addr add $bond_ip6/64 dev bond0 - sleep 5 - - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 1." - ping6 $peer_ip6 -c5 -I bond0 &>/dev/null - check_err $? "ping6 failed 1." - - # active salve should be the primary slave - check_active_slave veth1 - - # active slave should be the higher prio slave - ip link set $active_slave down - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 2." - check_active_slave veth2 - - # when only 1 slave is up - ip link set $active_slave down - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 3." - check_active_slave veth0 - - # when a higher prio slave change to up - ip link set veth2 up - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 4." - case $primary_reselect in - "0") - check_active_slave "veth2" - ;; - "1") - check_active_slave "veth0" - ;; - "2") - check_active_slave "veth0" - ;; - esac - local pre_active_slave=$active_slave - - # when the primary slave change to up - ip link set veth1 up - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 5." - case $primary_reselect in - "0") - check_active_slave "veth1" - ;; - "1") - check_active_slave "$pre_active_slave" - ;; - "2") - check_active_slave "$pre_active_slave" - ip link set $active_slave down - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 6." - check_active_slave "veth1" - ;; - esac - - # Test changing bond salve prio - if [[ "$primary_reselect" == "0" ]];then - ip link set dev veth0 type bond_slave prio 1000000 - ip link set dev veth1 type bond_slave prio 0 - ip link set dev veth2 type bond_slave prio -50 - ip -d link show veth0 | grep -q 'prio 1000000' - check_err $? "veth0 prio is not 1000000" - ip -d link show veth1 | grep -q 'prio 0' - check_err $? "veth1 prio is not 0" - ip -d link show veth2 | grep -q 'prio -50' - check_err $? "veth3 prio is not -50" - check_active_slave "veth1" - - ip link set $active_slave down - ping $peer_ip4 -c5 -I bond0 &>/dev/null - check_err $? "ping failed 7." - check_active_slave "veth0" - fi - - cleanup - - log_test "prio_test" "Test bonding option 'prio' with mode=$mode monitor=$monitor and primary_reselect=$primary_reselect" -} - -prio_miimon_test() -{ - local mode - local primary_reselect - - for mode in 1 5 6; do - for primary_reselect in 0 1 2; do - prio_test "miimon" $mode $primary_reselect - done - done -} - -prio_arp_ip_target_test() -{ - local primary_reselect - - for primary_reselect in 0 1 2; do - prio_test "arp_ip_target" 1 $primary_reselect - done -} - -if skip;then - log_test_skip "option_prio.sh" "Current iproute doesn't support 'prio'." - exit 0 -fi - -trap cleanup EXIT - -tests_run - -exit "$EXIT_STATUS" From 2e825f8accb4491466677162cd9893fe77aea2f9 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 6 Apr 2023 16:23:52 +0800 Subject: [PATCH 3/3] selftests: bonding: add arp validate test This patch add bonding arp validate tests with mode active backup, monitor arp_ip_target and ns_ip6_target. It also checks mii_status to make sure all slaves are UP. Acked-by: Jonathan Toppins Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- .../drivers/net/bonding/bond_options.sh | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 7213211d0bde..db29a3146a86 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -5,6 +5,7 @@ ALL_TESTS=" prio + arp_validate " REQUIRE_MZ=no @@ -200,6 +201,60 @@ prio() done } +arp_validate_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + + bond_check_connection + [ $RET -ne 0 ] && log_test "arp_validate" "$retmsg" + + # wait for a while to make sure the mii status stable + sleep 5 + for i in $(seq 0 2); do + mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status") + if [ ${mii_status} != "UP" ]; then + RET=1 + log_test "arp_validate" "interface eth$i mii_status $mii_status" + fi + done +} + +arp_validate_arp() +{ + local mode=$1 + local val + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} arp_validate $val" + log_test "arp_validate" "$mode arp_ip_target arp_validate $val" + done +} + +arp_validate_ns() +{ + local mode=$1 + local val + + if skip_ns; then + log_test_skip "arp_validate ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val" + log_test "arp_validate" "$mode ns_ip6_target arp_validate $val" + done +} + +arp_validate() +{ + arp_validate_arp "active-backup" + arp_validate_ns "active-backup" +} + trap cleanup EXIT setup_prepare