mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 19:13:47 +02:00
arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support
TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC, equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212 WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port, one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and infrared input. It was released by Ultrapower(UQSoft) as a blockchain-based terminal and is now discontinued and no longer supported. https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html Hardware schematics are not available at this time; however, the dts from the vendor firmware is provided for reference [1]. Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM can be confirmed as AZW, and the overall hardware circuit design is highly similar to the Beelink GS1. Tested, works: - debug UART - status LED - USB 3.0 Type-A port - USB 2.0 Type-A port - Micro USB port (Host) - MicroSD - eMMC - WiFi/Bluetooth - HDMI video output Does not work: - Ethernet (requires AC200 MFD/EPHY driver) - HDMI audio Untested: - SPDIF - IR receiver [1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patch.msgid.link/20260304073430.438835-4-jerrysteve1101@gmail.com Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This commit is contained in:
Jun Yan
Chen-Yu Tsai
parent
f3208874f3
commit
b912e48bee
|
|
@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
|
|||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-taiqicat-a01.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
|
||||
|
|
|
|||
361
arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
Normal file
361
arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
Normal file
|
|
@ -0,0 +1,361 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-h6.dtsi"
|
||||
#include "sun50i-h6-cpu-opp.dtsi"
|
||||
#include "sun50i-h6-gpu-opp.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "TaiqiCat (TQC) A01";
|
||||
compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
|
||||
|
||||
aliases {
|
||||
ethernet1 = &sdio_wifi;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
connector {
|
||||
compatible = "hdmi-connector";
|
||||
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ext_osc32k: ext-osc32k-clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "ext_osc32k";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "taiqicat:blue:power";
|
||||
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
reg_vcc5v: vcc5v {
|
||||
/* board wide 5V supply directly from the DC jack */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sound-spdif {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "sun50i-h6-spdif";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_out>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out: spdif-out {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "linux,spdif-dit";
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rtc CLK_OSC32K_FANOUT>;
|
||||
clock-names = "ext_clock";
|
||||
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
|
||||
post-power-on-delay-ms = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdca>;
|
||||
};
|
||||
|
||||
&de {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <®_dcdcc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
hvcc-supply = <®_bldo2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
vmmc-supply = <®_cldo1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <®_cldo3>;
|
||||
vqmmc-supply = <®_bldo3>;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
|
||||
sdio_wifi: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&r_pio>;
|
||||
interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
vmmc-supply = <®_cldo1>;
|
||||
vqmmc-supply = <®_bldo2>;
|
||||
cap-mmc-hw-reset;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
vcc-pc-supply = <®_bldo2>;
|
||||
vcc-pd-supply = <®_cldo1>;
|
||||
vcc-pg-supply = <®_bldo3>;
|
||||
};
|
||||
|
||||
&r_i2c {
|
||||
status = "okay";
|
||||
|
||||
axp805: pmic@36 {
|
||||
compatible = "x-powers,axp805", "x-powers,axp806";
|
||||
reg = <0x36>;
|
||||
interrupt-parent = <&r_intc>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
x-powers,self-working-mode;
|
||||
vina-supply = <®_vcc5v>;
|
||||
vinb-supply = <®_vcc5v>;
|
||||
vinc-supply = <®_vcc5v>;
|
||||
vind-supply = <®_vcc5v>;
|
||||
vine-supply = <®_vcc5v>;
|
||||
aldoin-supply = <®_vcc5v>;
|
||||
bldoin-supply = <®_vcc5v>;
|
||||
cldoin-supply = <®_vcc5v>;
|
||||
|
||||
regulators {
|
||||
reg_aldo1: aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pl-led-ir-pg-pm-ts";
|
||||
};
|
||||
|
||||
reg_aldo2: aldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-ac200";
|
||||
regulator-enable-ramp-delay = <100000>;
|
||||
};
|
||||
|
||||
aldo3 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_bldo1: bldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18-dram-bias-pll";
|
||||
};
|
||||
|
||||
reg_bldo2: bldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-pc-emmc-efuse-hdmi";
|
||||
};
|
||||
|
||||
reg_bldo3: bldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-pg-wifiio";
|
||||
};
|
||||
|
||||
bldo4 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_cldo1: cldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc33-io-pd-emmc-sd-usb-uart";
|
||||
};
|
||||
|
||||
/* This regulator is connected with CLDO3 */
|
||||
reg_cldo2: cldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-1";
|
||||
};
|
||||
|
||||
reg_cldo3: cldo3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-2";
|
||||
};
|
||||
|
||||
reg_dcdca: dcdca {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1160000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
reg_dcdcc: dcdcc {
|
||||
regulator-enable-ramp-delay = <32000>;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
reg_dcdcd: dcdcd {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <960000>;
|
||||
regulator-max-microvolt = <960000>;
|
||||
regulator-name = "vdd-sys-hdmi-usb";
|
||||
};
|
||||
|
||||
reg_dcdce: dcdce {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
sw {
|
||||
/* unused */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&r_ir {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
/*
|
||||
* PL0 and PL1 are used for PMIC I2C
|
||||
* don't enable the pl-supply else
|
||||
* it will fail at boot
|
||||
*
|
||||
* vcc-pl-supply = <®_aldo1>;
|
||||
*/
|
||||
vcc-pm-supply = <®_aldo1>;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
clocks = <&ext_osc32k>;
|
||||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spdif_tx_pin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ph_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43430a1-bt";
|
||||
clocks = <&rtc CLK_OSC32K_FANOUT>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <®_cldo3>;
|
||||
vddio-supply = <®_bldo3>;
|
||||
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
|
||||
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
|
||||
shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
|
||||
max-speed = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb2otg {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy {
|
||||
usb0_vbus-supply = <®_vcc5v>;
|
||||
usb3_vbus-supply = <®_vcc5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3phy {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user