From b8efcfca4370d1392e23c0ca84111bff26fe3926 Mon Sep 17 00:00:00 2001
From: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Date: Thu, 30 Jul 2026 09:03:33 +0800
Subject: [PATCH] dt-bindings: hwmon: (pmbus/max20830): add VOUT feedback
 resistor properties and complete examples

Add adi,vout-rfb1-ohms and adi,vout-rfb2-ohms properties to support
external voltage divider configuration for VOUT sensing. When the
desired output voltage is higher than VREF, a resistor divider (RFB1
and RFB2) is required to reach the intended value.

The properties use a dependency constraint to ensure both resistors
are specified together, or neither. This prevents misconfiguration
where only one resistor value is provided.

This patch also adds missing entries in the examples.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260730-dev-max20830c-v5-1-a7553f84ee74@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 .../bindings/hwmon/pmbus/adi,max20830.yaml    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
index 1625dd59417f..01b7275f5b34 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
@@ -44,15 +44,32 @@ properties:
       GPIO connected to the power-good status output pin.
     maxItems: 1
 
+  adi,vout-rfb1-ohms:
+    description:
+      Top feedback resistor (RFB1) value in ohms for VOUT sensing divider.
+      When the desired output voltage is higher than VREF, a resistor divider
+      is required. VOUT = VREF × (1 + RFB1/RFB2)
+
+  adi,vout-rfb2-ohms:
+    description:
+      Bottom feedback resistor (RFB2) value in ohms for VOUT sensing divider.
+      Datasheet recommends that RFB2 does not exceed 2.5kΩ.
+
 required:
   - compatible
   - reg
   - vddh-supply
 
+dependencies:
+  adi,vout-rfb1-ohms: ['adi,vout-rfb2-ohms']
+  adi,vout-rfb2-ohms: ['adi,vout-rfb1-ohms']
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -61,6 +78,11 @@ examples:
             compatible = "adi,max20830";
             reg = <0x30>;
             vddh-supply = <&vddh>;
+            avdd-supply = <&avdd>;
+            ldoin-supply = <&ldoin>;
+            pwr-good-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+            adi,vout-rfb1-ohms = <10000>;
+            adi,vout-rfb2-ohms = <2000>;
         };
     };
 ...