ALSA: usb-audio: Add quirk for Shanling UP4

The Shanling UP4 (0a12:1244, CSR-based, UAC1, full speed) sets the
MaxPacketsOnly bit in its AS isochronous endpoint descriptor. With
UAC_EP_CS_ATTR_FILL_MAX set, the driver fills every 1 ms packet up to
wMaxPacketSize, i.e. 48 frames, regardless of the sample rate. At
44.1 kHz the device expects 44/45 frames per packet and outputs only
silence. 48 kHz works because both packet sizes are the same there.

Measured with aplay on hw:UP4,0, 4 s of S16_LE stereo:

  before: 44.1 kHz consumed at ~48030 frames/s, done in 3.68 s, silent
  after:  44.1 kHz consumed at ~44220 frames/s, done in 4.00 s, audible

48 kHz plays fine both before and after the change. Regular music
playback at 44.1 kHz through PipeWire sounds fine as well.

Clear the attribute for this device, as is already done for the MOTU
MicroBook IIc. Since the packet sizes are equal at 48 kHz, this does
not change anything for other devices that may share this CSR USB ID
and only use 48 kHz.

Link: https://lore.kernel.org/all/CAPHAwzdUNRbZjBQuYKLf18EK_QGq0gR6Vx3YMZ=ffYKBogUtLA@mail.gmail.com/
Signed-off-by: Vadym Shevchuk <0xsheff@gmail.com>
Link: https://patch.msgid.link/20261005125953.190316-1-0xsheff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Vadym Shevchuk 2026-10-05 15:59:53 +03:00 committed by Takashi Iwai
parent 6f4cbf5f91
commit b42663cecd

View File

@ -2381,6 +2381,14 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;
case USB_ID(0x0a12, 0x1244): /* Shanling UP4 */
/*
* MaxPacketsOnly is set, but the device expects nominal-size
* packets. Filling 48 frames per packet at 44.1 kHz results
* in silence. No effect at 48 kHz, where both sizes match.
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;
case USB_ID(0x1224, 0x2a25): /* Jieli Technology USB PHY 2.0 */
/* mic works only when ep packet size is set to wMaxPacketSize */
fp->attributes |= UAC_EP_CS_ATTR_FILL_MAX;