From 859e02a369ab328a77dfcabf59562100e55f9c5c Mon Sep 17 00:00:00 2001 From: Sneh Mankad Date: Tue, 16 Jun 2026 17:24:53 +0530 Subject: [PATCH 1/2] pinctrl: qcom: Unconditionally mark gpio as wakeup enable GPIO interrupts that are wakeup capable need to be forwarded to wakeup capable parent irqchip. This is done via writing to it's wakeup_enable bit. Currently the bit is set only for PDC irqchip by checking skip_wake_irqs. skip_wake_irqs is set to differentiate between parent irqchips MPM and PDC. It is set when the parent irqchip is PDC to inform pinctrl about skipping the IRQ setting up at TLMM. However, the functionality to forward GPIO interrupts during SoC low power mode is needed regardless of which parent irqchip it is. Without the functionality it is impossible for MPM irqchip to detect the GPIO interrupt during SoC low power mode since for MPM irqchip the skip_wake_irqs is always false. Remove skip_wake_irqs condition when setting wakeup enable bit to allow forwarding GPIO interrupts for SoCs using MPM irqchip too. Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits") Signed-off-by: Sneh Mankad Reviewed-by: Maulik Shah Reviewed-by: Linus Walleij Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/pinctrl-msm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 11db6564c44d..fd0add4e71da 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -1240,12 +1240,12 @@ static int msm_gpio_irq_reqres(struct irq_data *d) /* * If the wakeup_enable bit is present and marked as available for the * requested GPIO, it should be enabled when the GPIO is marked as - * wake irq in order to allow the interrupt event to be transfered to - * the PDC HW. + * wake irq in order to allow the interrupt event to be transferred to + * the PDC/MPM HW. * While the name implies only the wakeup event, it's also required for * the interrupt event. */ - if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) { + if (g->intr_wakeup_present_bit) { u32 intr_cfg; raw_spin_lock_irqsave(&pctrl->lock, flags); @@ -1273,7 +1273,7 @@ static void msm_gpio_irq_relres(struct irq_data *d) unsigned long flags; /* Disable the wakeup_enable bit if it has been set in msm_gpio_irq_reqres() */ - if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) { + if (g->intr_wakeup_present_bit) { u32 intr_cfg; raw_spin_lock_irqsave(&pctrl->lock, flags); From 437a8d2aa1aa442c4a176fdf4700a9b3bb0c8794 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Fri, 26 Jun 2026 15:08:05 +0200 Subject: [PATCH 2/2] pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151 Pins 143 and 151 were not included in the PDC wakeup map. They are normally used for PCIe2A and PCIe3a PERST# respectively, so they're unlikely to be excercised in practice, but still add them for the sake of completeness. Fixes: c0e4c71a9e7c ("pinctrl: qcom: Introduce sc8280xp TLMM driver") Signed-off-by: Konrad Dybcio Link: https://patch.msgid.link/20260626-topic-8280_pinctrl_wakeup-v1-1-2ccb267148f5@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/pinctrl-sc8280xp.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c index 4056b9fa32f8..e018bd11626c 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c +++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c @@ -1881,16 +1881,17 @@ static const struct msm_gpio_wakeirq_map sc8280xp_pdc_map[] = { { 126, 200 }, { 127, 225 }, { 128, 262 }, { 129, 201 }, { 130, 209 }, { 131, 173 }, { 132, 202 }, { 136, 210 }, { 138, 171 }, { 139, 226 }, { 140, 227 }, { 142, 228 }, - { 144, 229 }, { 145, 230 }, { 146, 231 }, { 148, 232 }, - { 149, 233 }, { 150, 234 }, { 152, 235 }, { 154, 212 }, - { 157, 213 }, { 161, 219 }, { 170, 236 }, { 171, 221 }, - { 174, 222 }, { 175, 237 }, { 176, 223 }, { 177, 170 }, - { 180, 238 }, { 181, 239 }, { 182, 240 }, { 183, 241 }, - { 184, 242 }, { 185, 243 }, { 190, 178 }, { 193, 184 }, - { 196, 185 }, { 198, 186 }, { 200, 174 }, { 201, 175 }, - { 205, 176 }, { 206, 177 }, { 208, 187 }, { 210, 198 }, - { 211, 199 }, { 212, 204 }, { 215, 205 }, { 220, 188 }, - { 221, 194 }, { 223, 195 }, { 225, 196 }, { 227, 197 }, + { 143, 261 }, { 144, 229 }, { 145, 230 }, { 146, 231 }, + { 148, 232 }, { 149, 233 }, { 150, 234 }, { 151, 264 }, + { 152, 235 }, { 154, 212 }, { 157, 213 }, { 161, 219 }, + { 170, 236 }, { 171, 221 }, { 174, 222 }, { 175, 237 }, + { 176, 223 }, { 177, 170 }, { 180, 238 }, { 181, 239 }, + { 182, 240 }, { 183, 241 }, { 184, 242 }, { 185, 243 }, + { 190, 178 }, { 193, 184 }, { 196, 185 }, { 198, 186 }, + { 200, 174 }, { 201, 175 }, { 205, 176 }, { 206, 177 }, + { 208, 187 }, { 210, 198 }, { 211, 199 }, { 212, 204 }, + { 215, 205 }, { 220, 188 }, { 221, 194 }, { 223, 195 }, + { 225, 196 }, { 227, 197 }, }; static struct msm_pinctrl_soc_data sc8280xp_pinctrl = {