diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,abp2030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,abp2030pa.yaml
new file mode 100644
index 000000000000..e82897ffac3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,abp2030pa.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,abp2030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell abp2030pa pressure sensor
+
+maintainers:
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+description: |
+  Honeywell pressure sensor of model abp2030pa.
+
+  This sensor has an I2C and SPI interface.
+
+  There are many models with different pressure ranges available. The vendor
+  calls them "ABP2 series". All of them have an identical programming model and
+  differ in the pressure range and measurement unit.
+
+  To support different models one needs to specify its pressure triplet.
+
+  For custom silicon chips not covered by the Honeywell ABP2 series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+
+  Specifications about the devices can be found at:
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp2-series/documents/sps-siot-abp2-series-datasheet-32350268-en.pdf
+
+properties:
+  compatible:
+    const: honeywell,abp2030pa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Optional interrupt for indicating end of conversion.
+      SPI variants of ABP2 chips do not provide this feature.
+    maxItems: 1
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 008BA, 010BA, 012BA, 001BD,
+           1.6BD, 2.5BD, 004BD, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 008BG,
+           010BG, 012BG, 001GG, 1.2GG, 100KA, 160KA, 250KA, 001KD, 1.6KD,
+           2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD, 100KD,
+           160KD, 250KD, 400KD, 001KG, 1.6KG, 2.5KG, 004KG, 006KG, 010KG,
+           016KG, 025KG, 040KG, 060KG, 100KG, 160KG, 250KG, 400KG, 600KG,
+           800KG, 250LD, 600LD, 600LG, 2.5MD, 006MD, 010MD, 016MD, 025MD,
+           040MD, 060MD, 100MD, 160MD, 250MD, 400MD, 600MD, 006MG, 010MG,
+           016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG, 600MG,
+           001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND, 002NG, 004NG,
+           005NG, 010NG, 020NG, 030NG, 015PA, 030PA, 060PA, 100PA, 150PA,
+           175PA, 001PD, 005PD, 015PD, 030PD, 060PD, 001PG, 005PG, 015PG,
+           030PG, 060PG, 100PG, 150PG, 175PG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@18 {
+            compatible = "honeywell,abp2030pa";
+            reg = <0x18>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "001BA";
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,abp2030pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+
+            honeywell,pressure-triplet = "001PD";
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b11839cba9d..91e37589fde2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11505,6 +11505,12 @@ F:	lib/test_hmm*
 F:	mm/hmm*
 F:	tools/testing/selftests/mm/*hmm*
 
+HONEYWELL ABP2030PA PRESSURE SENSOR SERIES IIO DRIVER
+M:	Petre Rodan <petre.rodan@subdimension.ro>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/pressure/honeywell,abp2030pa.yaml
+
 HONEYWELL HSC030PA PRESSURE SENSOR SERIES IIO DRIVER
 M:	Petre Rodan <petre.rodan@subdimension.ro>
 L:	linux-iio@vger.kernel.org