wifi: ath12k: Add ath12k_hw_params for IPQ5424

Add ath12k_hw_params for the ath12k AHB-based WiFi 7 device IPQ5424.
The WiFi device IPQ5424 is similar to IPQ5332. Most of the hardware
parameters like hw_ops, wmi_init, ring_mask, etc., are the same between
IPQ5424 and IPQ5332, hence use these same parameters for IPQ5424.
Some parameters are specific to IPQ5424; initially set these to
0 or NULL, and populate them in subsequent patches.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5424 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1

Signed-off-by: Saravanakumar Duraisamy <quic_saradura@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-2-8e96aa660ec4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This commit is contained in:
Saravanakumar Duraisamy 2026-04-07 10:56:29 +05:30 committed by Jeff Johnson
parent 3ebaf730b5
commit b1ad1a052b
2 changed files with 80 additions and 0 deletions

View File

@ -157,6 +157,7 @@ enum ath12k_hw_rev {
ATH12K_HW_WCN7850_HW20,
ATH12K_HW_IPQ5332_HW10,
ATH12K_HW_QCC2072_HW10,
ATH12K_HW_IPQ5424_HW10,
};
enum ath12k_firmware_mode {

View File

@ -753,6 +753,85 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = {
.dp_primary_link_only = false,
},
{
.name = "ipq5424 hw1.0",
.hw_rev = ATH12K_HW_IPQ5424_HW10,
.fw = {
.dir = "IPQ5424/hw1.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
.m3_loader = ath12k_m3_fw_loader_remoteproc,
.download_aux_ucode = false,
},
.max_radios = 1,
.single_pdev_only = false,
.qmi_service_ins_id = ATH12K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ5332,
.internal_sleep_clock = false,
.hw_ops = &qcn9274_ops,
.ring_mask = &ath12k_wifi7_hw_ring_mask_ipq5332,
.host_ce_config = ath12k_wifi7_host_ce_config_ipq5332,
.ce_count = 12,
.target_ce_config = ath12k_wifi7_target_ce_config_wlan_ipq5332,
.target_ce_count = 12,
.svc_to_ce_map =
ath12k_wifi7_target_service_to_ce_map_wlan_ipq5332,
.svc_to_ce_map_len = 18,
.rxdma1_enable = true,
.num_rxdma_per_pdev = 1,
.num_rxdma_dst_ring = 0,
.rx_mac_buf_ring = false,
.vdev_start_delay = false,
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT),
.supports_monitor = true,
.idle_ps = false,
.download_calib = true,
.supports_suspend = false,
.tcl_ring_retry = true,
.reoq_lut_support = false,
.supports_shadow_regs = false,
.num_tcl_banks = 48,
.max_tx_ring = 4,
.mhi_config = NULL,
.wmi_init = &ath12k_wifi7_wmi_init_qcn9274,
.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
.rfkill_pin = 0,
.rfkill_cfg = 0,
.rfkill_on_level = 0,
.rddm_size = 0,
.def_num_link = 0,
.max_mlo_peer = 256,
.otp_board_id_register = 0,
.supports_sta_ps = false,
.acpi_guid = NULL,
.supports_dynamic_smps_6ghz = false,
.iova_mask = 0,
.supports_aspm = false,
.ce_ie_addr = NULL,
.ce_remap = NULL,
.bdf_addr_offset = 0x940000,
.current_cc_support = false,
.dp_primary_link_only = true,
},
};
/* Note: called under rcu_read_lock() */