diff --git a/MAINTAINERS b/MAINTAINERS
index 4036b64ed7b0..7d767c1c9e4a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6226,6 +6226,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
 F:	drivers/gpu/drm/bridge/chipone-icn6211.c
 
+DRM DRIVER FOR EBBG FT8719 PANEL
+M:	Joel Selvaraj <jo@jsfamily.in>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
+F:	drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 4f1f004b3c54..a9043eacce97 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -115,6 +115,17 @@ config DRM_PANEL_EDP
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.
 
+config DRM_PANEL_EBBG_FT8719
+	tristate "EBBG FT8719 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the EBBG FT8719
+	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
+	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
+	  interface to the host.
+
 config DRM_PANEL_ELIDA_KD35T133
 	tristate "Elida KD35T133 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 42a7ab54234b..34e717382dbb 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o
+obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
new file mode 100644
index 000000000000..386f8321b930
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Joel Selvaraj <jo@jsfamily.in>
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+static const char * const regulator_names[] = {
+	"vddio",
+	"vddpos",
+	"vddneg",
+};
+
+static const unsigned long regulator_enable_loads[] = {
+	62000,
+	100000,
+	100000
+};
+
+struct ebbg_ft8719 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+
+	struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+	struct gpio_desc *reset_gpio;
+};
+
+static inline
+struct ebbg_ft8719 *to_ebbg_ft8719(struct drm_panel *panel)
+{
+	return container_of(panel, struct ebbg_ft8719, panel);
+}
+
+static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(4000, 5000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(15000, 16000);
+}
+
+static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display brightness: %d\n", ret);
+		return ret;
+	}
+
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(90);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	usleep_range(10000, 11000);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(90);
+
+	return 0;
+}
+
+static int ebbg_ft8719_prepare(struct drm_panel *panel)
+{
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ebbg_ft8719_reset(ctx);
+
+	ret = ebbg_ft8719_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_unprepare(struct drm_panel *panel)
+{
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = ebbg_ft8719_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		dev_err(panel->dev, "Failed to disable regulators: %d\n", ret);
+
+	return 0;
+}
+
+static const struct drm_display_mode ebbg_ft8719_mode = {
+	.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 4,
+	.htotal = 1080 + 28 + 4 + 16,
+	.vdisplay = 2246,
+	.vsync_start = 2246 + 120,
+	.vsync_end = 2246 + 120 + 4,
+	.vtotal = 2246 + 120 + 4 + 12,
+	.width_mm = 68,
+	.height_mm = 141,
+};
+
+static int ebbg_ft8719_get_modes(struct drm_panel *panel,
+				     struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &ebbg_ft8719_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
+	.prepare = ebbg_ft8719_prepare,
+	.unprepare = ebbg_ft8719_unprepare,
+	.get_modes = ebbg_ft8719_get_modes,
+};
+
+static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct ebbg_ft8719 *ctx;
+	int i, ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+		ctx->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+						regulator_enable_loads[i]);
+		if (ret)
+			return dev_err_probe(dev, ret,
+						 "Failed to set regulator load\n");
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &ebbg_ft8719_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_remove(struct mipi_dsi_device *dsi)
+{
+	struct ebbg_ft8719 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id ebbg_ft8719_of_match[] = {
+	{ .compatible = "ebbg,ft8719" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ebbg_ft8719_of_match);
+
+static struct mipi_dsi_driver ebbg_ft8719_driver = {
+	.probe = ebbg_ft8719_probe,
+	.remove = ebbg_ft8719_remove,
+	.driver = {
+		.name = "panel-ebbg-ft8719",
+		.of_match_table = ebbg_ft8719_of_match,
+	},
+};
+module_mipi_dsi_driver(ebbg_ft8719_driver);
+
+MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
+MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
+MODULE_LICENSE("GPL v2");