github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-08 14:42:37 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

ARM: dts: ux500: Fix up TVK R3 sensors

Browse Source 
[ Upstream commit aeceecd40d ]

The TVK1281618 R3 sensors are different from the R2 board,
some incorrectness is fixed and some new sensors added, we
also rename the nodes appropriately with accelerometer@
etc.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Linus Walleij 2021-03-26 10:19:11 +01:00 committed by Greg Kroah-Hartman
parent 3f571ae706
commit af79dc5ad9
1 changed files with 52 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
View File

@ -8,37 +8,43 @@
/ { / {
soc { soc {
i2c@80128000 { i2c@80128000 {
/* Marked: accelerometer@19 {
* 129 compatible = "st,lsm303dlhc-accel";
* M35
* L3GD20
*/
l3gd20@6a {
/* Gyroscope */
compatible = "st,l3gd20";
status = "disabled";
st,drdy-int-pin = <1>; st,drdy-int-pin = <1>;
drive-open-drain; reg = <0x19>;
reg = <0x6a>; // 0x6a or 0x6b vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
interrupt-parent = <&gpio2>;
interrupts = <18 IRQ_TYPE_EDGE_RISING>,
<19 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
};
magnetometer@1e {
compatible = "st,lsm303dlm-magn";
st,drdy-int-pin = <1>;
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
// This interrupt is not properly working with the driver
// interrupt-parent = <&gpio1>;
// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&magn_tvk_mode>;
};
gyroscope@68 {
/* Gyroscope */
compatible = "st,l3g4200d-gyro";
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>; vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>; vddio-supply = <&db8500_vsmps2_reg>;
}; };
/* pressure@5c {
* Marked: /* Barometer/pressure sensor */
* 2122 compatible = "st,lps001wp-press";
* C3H reg = <0x5c>;
* DQEEE
* LIS3DH?
*/
lis3dh@18 {
/* Accelerometer */
compatible = "st,lis3dh-accel";
st,drdy-int-pin = <1>;
reg = <0x18>;
vdd-supply = <&ab8500_ldo_aux1_reg>; vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>; vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
}; };
}; };
@ -54,5 +60,26 @@ panel {
}; };
}; };
}; };
pinctrl {
accelerometer {
accel_tvk_mode: accel_tvk {
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
pins = "GPIO82_C1", "GPIO83_D3";
ste,config = <&gpio_in_pd>;
};
};
};
magnetometer {
magn_tvk_mode: magn_tvk {
/* GPIO 32 used for DRDY, pull this down */
tvk_cfg {
pins = "GPIO32_V2";
ste,config = <&gpio_in_pd>;
};
};
};
};
}; };
}; };