diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 333b8b463704..c3f9add98333 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -223,6 +223,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+	{ USB_DEVICE(0x1B1C, 0x1C02) }, /* Corsair AX1500i Power Supply */
 	{ USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */
 	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index dc2b39810a26..3b4df3ac7c73 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -52,6 +52,7 @@
 #define QT2_XMIT_FLUSH      0x05  /* no following info */
 #define QT2_CONTROL_ESCAPE  0xff  /* pass through previous 2 control bytes */
 
+#define  MIN_BAUD_RATE              50
 #define  MAX_BAUD_RATE              921600
 #define  DEFAULT_BAUD_RATE          9600
 
@@ -156,7 +157,7 @@ static inline int calc_baud_divisor(int baudrate)
 
 static inline int qt2_set_port_config(struct usb_device *dev,
 				      unsigned char port_number,
-				      u16 baudrate, u16 lcr)
+				      speed_t baudrate, u16 lcr)
 {
 	int divisor = calc_baud_divisor(baudrate);
 	u16 index = ((u16) (lcr << 8) | (u16) (port_number));
@@ -257,9 +258,9 @@ static void qt2_set_termios(struct tty_struct *tty,
 	struct usb_device *dev = port->serial->dev;
 	struct qt2_port_private *port_priv;
 	struct ktermios *termios = &tty->termios;
-	u16 baud;
 	unsigned int cflag = termios->c_cflag;
 	u16 new_lcr = 0;
+	speed_t baud;
 	int status;
 
 	port_priv = usb_get_serial_port_data(port);
@@ -277,6 +278,18 @@ static void qt2_set_termios(struct tty_struct *tty,
 	if (!baud)
 		baud = 9600;
 
+	if (baud < MIN_BAUD_RATE || baud > MAX_BAUD_RATE) {
+		if (old_termios)
+			baud = tty_termios_baud_rate(old_termios);
+		else
+			baud = clamp(baud, MIN_BAUD_RATE, MAX_BAUD_RATE);
+
+		tty_encode_baud_rate(tty, baud, baud);
+
+		if (!baud)
+			baud = 9600;
+	}
+
 	status = qt2_set_port_config(dev, port_priv->device_port, baud,
 				     new_lcr);
 	if (status < 0)
@@ -373,7 +386,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 	port_priv->device_port = (u8) device_port;
 
 	if (tty)
-		qt2_set_termios(tty, port, &tty->termios);
+		qt2_set_termios(tty, port, NULL);
 
 	return 0;
 
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index b0d51558b73c..8c5b9ef708b3 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -32,6 +32,7 @@
 
 #define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
 
+#define  MIN_BAUD_RATE              50
 #define  MAX_BAUD_RATE              460800
 
 #define ATC_DISABLED                0x00
@@ -217,9 +218,10 @@ static void ssu100_set_termios(struct tty_struct *tty,
 {
 	struct usb_device *dev = port->serial->dev;
 	struct ktermios *termios = &tty->termios;
-	u16 baud, divisor, remainder;
+	speed_t baud, remainder;
 	unsigned int cflag = termios->c_cflag;
 	u16 urb_value = 0; /* will hold the new flags */
+	u16 divisor;
 	int result;
 
 	if (cflag & PARENB) {
@@ -235,6 +237,18 @@ static void ssu100_set_termios(struct tty_struct *tty,
 	if (!baud)
 		baud = 9600;
 
+	if (baud < MIN_BAUD_RATE || baud > MAX_BAUD_RATE) {
+		if (old_termios)
+			baud = tty_termios_baud_rate(old_termios);
+		else
+			baud = clamp(baud, MIN_BAUD_RATE, MAX_BAUD_RATE);
+
+		tty_encode_baud_rate(tty, baud, baud);
+
+		if (!baud)
+			baud = 9600;
+	}
+
 	dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud);
 
 
@@ -310,7 +324,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
 
 	if (tty)
-		ssu100_set_termios(tty, port, &tty->termios);
+		ssu100_set_termios(tty, port, NULL);
 
 	return usb_serial_generic_open(tty, port);
 }