From 86eb94bf8006a85738f0ccf49e3ce894e03922a6 Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Wed, 29 Mar 2023 16:54:25 -0400 Subject: [PATCH 1/4] scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously" This reverts commit 7dafc3e007918384c8693ff8d70381b5c1e9c247. This patch introduced a regression [1] where hba->pwr_info is used before being initialized, which could create issues in ufshcd_scale_gear(). Revert it until a better solution is found. [1] https://lore.kernel.org/all/CAGaU9a_PMZhqv+YJ0r3w-hJMsR922oxW6Kg59vw+oen-NZ6Otw@mail.gmail.com Signed-off-by: Adrien Thierry Link: https://lore.kernel.org/r/20230329205426.46393-1-athierry@redhat.com Reviewed-by: Stanley Chu Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 47 +++++++++++++-------------------------- include/ufs/ufshcd.h | 1 - 2 files changed, 16 insertions(+), 32 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 37e178a9ac47..70b112038792 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -1409,13 +1409,6 @@ static int ufshcd_devfreq_target(struct device *dev, struct ufs_clk_info *clki; unsigned long irq_flags; - /* - * Skip devfreq if UFS initialization is not finished. - * Otherwise ufs could be in a inconsistent state. - */ - if (!smp_load_acquire(&hba->logical_unit_scan_finished)) - return 0; - if (!ufshcd_is_clkscaling_supported(hba)) return -EINVAL; @@ -8399,6 +8392,22 @@ static int ufshcd_add_lus(struct ufs_hba *hba) if (ret) goto out; + /* Initialize devfreq after UFS device is detected */ + if (ufshcd_is_clkscaling_supported(hba)) { + memcpy(&hba->clk_scaling.saved_pwr_info.info, + &hba->pwr_info, + sizeof(struct ufs_pa_layer_attr)); + hba->clk_scaling.saved_pwr_info.is_valid = true; + hba->clk_scaling.is_allowed = true; + + ret = ufshcd_devfreq_init(hba); + if (ret) + goto out; + + hba->clk_scaling.is_enabled = true; + ufshcd_init_clk_scaling_sysfs(hba); + } + ufs_bsg_probe(hba); ufshpb_init(hba); scsi_scan_host(hba->host); @@ -8670,12 +8679,6 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) if (ret) { pm_runtime_put_sync(hba->dev); ufshcd_hba_exit(hba); - } else { - /* - * Make sure that when reader code sees UFS initialization has finished, - * all initialization steps have really been executed. - */ - smp_store_release(&hba->logical_unit_scan_finished, true); } } @@ -10316,30 +10319,12 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) */ ufshcd_set_ufs_dev_active(hba); - /* Initialize devfreq */ - if (ufshcd_is_clkscaling_supported(hba)) { - memcpy(&hba->clk_scaling.saved_pwr_info.info, - &hba->pwr_info, - sizeof(struct ufs_pa_layer_attr)); - hba->clk_scaling.saved_pwr_info.is_valid = true; - hba->clk_scaling.is_allowed = true; - - err = ufshcd_devfreq_init(hba); - if (err) - goto rpm_put_sync; - - hba->clk_scaling.is_enabled = true; - ufshcd_init_clk_scaling_sysfs(hba); - } - async_schedule(ufshcd_async_scan, hba); ufs_sysfs_add_nodes(hba->dev); device_enable_async_suspend(dev); return 0; -rpm_put_sync: - pm_runtime_put_sync(dev); free_tmf_queue: blk_mq_destroy_queue(hba->tmf_queue); blk_put_queue(hba->tmf_queue); diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h index 25aab8ec4f86..431c3afb2ce0 100644 --- a/include/ufs/ufshcd.h +++ b/include/ufs/ufshcd.h @@ -979,7 +979,6 @@ struct ufs_hba { struct completion *uic_async_done; enum ufshcd_state ufshcd_state; - bool logical_unit_scan_finished; u32 eh_flags; u32 intr_mask; u16 ee_ctrl_mask; From a3d27dfdcfc27ac3f46de5391bb6d24f04af7941 Mon Sep 17 00:00:00 2001 From: Ranjan Kumar Date: Fri, 31 Mar 2023 17:53:17 +0530 Subject: [PATCH 2/4] scsi: mpi3mr: Handle soft reset in progress fault code (0xF002) The driver is exiting from the fault watchdog thread if it sees the 0xF002 (Soft reset in progress) fault code. If the driver initiates the soft reset, then the driver restarts the watchdog at the end of the soft reset completion. However, if the soft reset is initiated by the firmware asynchronously, then the driver will never restart the watchdog and never re-initialize the controller after the asynchronous soft reset completion. Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index a565817aa56d..d109a4ceb72b 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -2526,7 +2526,7 @@ static void mpi3mr_watchdog_work(struct work_struct *work) mrioc->unrecoverable = 1; goto schedule_work; case MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS: - return; + goto schedule_work; case MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET: reset_reason = MPI3MR_RESET_FROM_CIACTIV_FAULT; break; From 85ade4010e13ef152ea925c74d94253db92e5428 Mon Sep 17 00:00:00 2001 From: Li Zetao Date: Sat, 25 Mar 2023 11:00:04 +0000 Subject: [PATCH 3/4] scsi: qla2xxx: Fix memory leak in qla2x00_probe_one() There is a memory leak reported by kmemleak: unreferenced object 0xffffc900003f0000 (size 12288): comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110 [<0000000001906886>] __vmalloc_node+0xbd/0x150 [<000000005bb4dc34>] vmalloc+0x25/0x30 [<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx] [<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx] [<00000000641ccc04>] local_pci_probe+0xeb/0x1a0 The root cause is traced to an error-handling path in qla2x00_probe_one() when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is used to record the port information and it is allocated in qla2x00_create_host(). However, it is not released in the error handling path "probe_failed". Fix this by freeing the memory of "scan.l" when an error occurs in the adapter initialization process. Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by: Li Zetao Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index bee1b8a82020..d0cdbfe771a9 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3617,6 +3617,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) probe_failed: qla_enode_stop(base_vha); qla_edb_stop(base_vha); + vfree(base_vha->scan.l); if (base_vha->gnl.l) { dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size, base_vha->gnl.l, base_vha->gnl.ldma); From 48b19b79cfa37b1e50da3b5a8af529f994c08901 Mon Sep 17 00:00:00 2001 From: Zhong Jinghua Date: Wed, 29 Mar 2023 15:17:39 +0800 Subject: [PATCH 4/4] scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param() The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment. Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Zhong Jinghua Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/iscsi_tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index c76f82fb8b63..15f452908926 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -771,13 +771,12 @@ static int iscsi_sw_tcp_conn_set_param(struct iscsi_cls_conn *cls_conn, iscsi_set_param(cls_conn, param, buf, buflen); break; case ISCSI_PARAM_DATADGST_EN: - iscsi_set_param(cls_conn, param, buf, buflen); - mutex_lock(&tcp_sw_conn->sock_lock); if (!tcp_sw_conn->sock) { mutex_unlock(&tcp_sw_conn->sock_lock); return -ENOTCONN; } + iscsi_set_param(cls_conn, param, buf, buflen); tcp_sw_conn->sendpage = conn->datadgst_en ? sock_no_sendpage : tcp_sw_conn->sock->ops->sendpage; mutex_unlock(&tcp_sw_conn->sock_lock);