mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 11:37:06 +02:00
arm64: dts: imx91-var-dart: Add support for Variscite Sonata board
Add device tree support for the Variscite Sonata carrier board with the DART-MX91 system on module. The Sonata board includes - uSD Card support - USB ports and OTG - Additional Gigabit Ethernet interface - Uart interfaces - GPIO Expanders - RTC module - TPM module Link: https://variscite.com/carrier-boards/sonata-board/ Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
This commit is contained in:
Stefano Radaelli
Frank Li
parent
d3ad2ce211
commit
a69ba865a7
|
|
@ -441,6 +441,7 @@ imx91-tqma9131-mba91xxca-lvds-tm070jvhg33-dtbs := imx91-tqma9131-mba91xxca.dtb i
|
|||
imx91-tqma9131-mba91xxca-rgb-cdtech-dc44-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtbo
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca-lvds-tm070jvhg33.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca-rgb-cdtech-dc44.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx91-var-dart-sonata.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
|
||||
|
||||
|
|
|
|||
471
arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
Normal file
471
arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
Normal file
|
|
@ -0,0 +1,471 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Variscite Sonata carrier board for DART-MX91
|
||||
*
|
||||
* Link: https://variscite.com/carrier-boards/sonata-board/
|
||||
*
|
||||
* Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx91-var-dart.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Variscite DART-MX91 on Sonata-Board";
|
||||
compatible = "variscite,var-dart-mx91-sonata",
|
||||
"variscite,var-dart-mx91",
|
||||
"fsl,imx91";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &eqos;
|
||||
ethernet1 = &fec;
|
||||
gpio0 = &gpio1;
|
||||
gpio1 = &gpio2;
|
||||
gpio2 = &gpio3;
|
||||
i2c0 = &lpi2c1;
|
||||
i2c1 = &lpi2c2;
|
||||
i2c2 = &lpi2c3;
|
||||
mmc0 = &usdhc1;
|
||||
mmc1 = &usdhc2;
|
||||
serial0 = &lpuart1;
|
||||
serial1 = &lpuart2;
|
||||
serial2 = &lpuart3;
|
||||
serial3 = &lpuart4;
|
||||
serial4 = &lpuart5;
|
||||
serial5 = &lpuart6;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &lpuart1;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-home {
|
||||
label = "Home";
|
||||
linux,code = <KEY_HOME>;
|
||||
gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-up {
|
||||
label = "Up";
|
||||
linux,code = <KEY_UP>;
|
||||
gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-down {
|
||||
label = "Down";
|
||||
linux,code = <KEY_DOWN>;
|
||||
gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-back {
|
||||
label = "Back";
|
||||
linux,code = <KEY_BACK>;
|
||||
gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-emmc {
|
||||
label = "eMMC";
|
||||
gpios = <&pca6408_2 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
};
|
||||
|
||||
reg_vref_1v8: regulator-adc-vref {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vref_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
||||
regulator-name = "VDD_SD2_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
off-on-delay-us = <20000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
ranges;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
alloc-ranges = <0 0x80000000 0 0x40000000>;
|
||||
reusable;
|
||||
size = <0 0x10000000>;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
vref-supply = <®_vref_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Use external instead of internal RTC */
|
||||
&bbnsm_rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&eqos {
|
||||
mdio {
|
||||
ethphy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <15000>;
|
||||
reset-deassert-us = <100000>;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&pinctrl_fec>;
|
||||
pinctrl-1 = <&pinctrl_fec_sleep>;
|
||||
/*
|
||||
* The required RGMII TX and RX 2ns delays are implemented directly
|
||||
* in hardware via passive delay elements on the SOM PCB.
|
||||
* No delay configuration is needed in software via PHY driver.
|
||||
*/
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <ðphy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&flexcan1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flexcan1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpi2c1 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "sleep", "gpio";
|
||||
pinctrl-0 = <&pinctrl_lpi2c1>;
|
||||
pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
|
||||
pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
|
||||
scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
status = "okay";
|
||||
|
||||
pca6408_1: gpio@20 {
|
||||
compatible = "nxp,pcal6408";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
pca6408_2: gpio@21 {
|
||||
compatible = "nxp,pcal6408";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
pca9534: gpio@22 {
|
||||
compatible = "nxp,pca9534";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
st33ktpm2xi2c: tpm@2e {
|
||||
compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
|
||||
reg = <0x2e>;
|
||||
};
|
||||
|
||||
/* Capacitive touch controller */
|
||||
ft5x06_ts: touchscreen@38 {
|
||||
compatible = "edt,edt-ft5206";
|
||||
reg = <0x38>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_captouch>;
|
||||
reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
|
||||
touchscreen-size-x = <800>;
|
||||
touchscreen-size-y = <480>;
|
||||
touchscreen-inverted-x;
|
||||
touchscreen-inverted-y;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
/* USB Type-C Controller */
|
||||
typec@3d {
|
||||
compatible = "nxp,ptn5150";
|
||||
reg = <0x3d>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_extcon>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
port {
|
||||
typec1_dr_sw: endpoint {
|
||||
remote-endpoint = <&usb1_drd_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1337";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Console (J10) */
|
||||
&lpuart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Header (J12.4, J12.6) */
|
||||
&lpuart6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart6>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "otg";
|
||||
hnp-disable;
|
||||
srp-disable;
|
||||
adp-disable;
|
||||
usb-role-switch;
|
||||
disable-over-current;
|
||||
samsung,picophy-pre-emp-curr-control = <3>;
|
||||
samsung,picophy-dc-vol-level-adjust = <7>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
usb1_drd_sw: endpoint {
|
||||
remote-endpoint = <&typec1_dr_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
disable-over-current;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SD */
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
|
||||
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* GPIO Expanders shared IRQ */
|
||||
MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_captouch: captouchgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_extcon: extcongrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_fec: fecgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x57e
|
||||
MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x57e
|
||||
MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x57e
|
||||
MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x37e
|
||||
MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x5fe
|
||||
MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e
|
||||
MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x57e
|
||||
MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x57e
|
||||
MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x57e
|
||||
MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x57e
|
||||
MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x5fe
|
||||
MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x57e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_fec_sleep: fecsleepgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_ENET2_RD0__GPIO4_IO24 0x51e
|
||||
MX91_PAD_ENET2_RD1__GPIO4_IO25 0x51e
|
||||
MX91_PAD_ENET2_RD2__GPIO4_IO26 0x51e
|
||||
MX91_PAD_ENET2_RD3__GPIO4_IO27 0x31e
|
||||
MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e
|
||||
MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
|
||||
MX91_PAD_ENET2_TD0__GPIO4_IO19 0x51e
|
||||
MX91_PAD_ENET2_TD1__GPIO4_IO18 0x51e
|
||||
MX91_PAD_ENET2_TD2__GPIO4_IO17 0x51e
|
||||
MX91_PAD_ENET2_TD3__GPIO4_IO16 0x51e
|
||||
MX91_PAD_ENET2_TXC__GPIO4_IO21 0x51e
|
||||
MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan1: flexcan1grp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_PDM_CLK__CAN1_TX 0x139e
|
||||
MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lpi2c1: lpi2c1grp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
|
||||
MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lpi2c1_gpio: lpi2c1-gpiogrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_I2C1_SCL__GPIO1_IO0 0x31e
|
||||
MX91_PAD_I2C1_SDA__GPIO1_IO1 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_CCM_CLKO3__GPIO4_IO28 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_UART1_RXD__LPUART1_RX 0x31e
|
||||
MX91_PAD_UART1_TXD__LPUART1_TX 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart6: uart6grp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_GPIO_IO05__LPUART6_RX 0x31e
|
||||
MX91_PAD_GPIO_IO04__LPUART6_TX 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582
|
||||
MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382
|
||||
MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382
|
||||
MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382
|
||||
MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382
|
||||
MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382
|
||||
MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e
|
||||
MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e
|
||||
MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
|
||||
MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
|
||||
MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
|
||||
MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
|
||||
MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe
|
||||
MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe
|
||||
MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
|
||||
MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
|
||||
MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
|
||||
MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
|
||||
MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_sleep: usdhc2sleepgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CLK__GPIO3_IO1 0x51e
|
||||
MX91_PAD_SD2_CMD__GPIO3_IO2 0x51e
|
||||
MX91_PAD_SD2_DATA0__GPIO3_IO3 0x51e
|
||||
MX91_PAD_SD2_DATA1__GPIO3_IO4 0x51e
|
||||
MX91_PAD_SD2_DATA2__GPIO3_IO5 0x51e
|
||||
MX91_PAD_SD2_DATA3__GPIO3_IO6 0x51e
|
||||
MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
|
||||
fsl,pins = <
|
||||
MX91_PAD_SD2_CD_B__GPIO3_IO0 0x51e
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user