diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 815a90808901..90b3582b7619 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -100,6 +100,10 @@ properties:
           Built-in switch of the Airoha AN7583 SoC
         const: airoha,an7583-switch
 
+      - description:
+          Built-in switch of the EcoNet EN7528 SoC
+        const: econet,en7528-switch
+
   reg:
     maxItems: 1
 
@@ -318,6 +322,7 @@ allOf:
             - mediatek,mt7988-switch
             - airoha,en7581-switch
             - airoha,an7583-switch
+            - econet,en7528-switch
     then:
       $ref: "#/$defs/builtin-dsa-port"
       properties:
diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c
index 119fdd863d91..fd68b1cd0630 100644
--- a/drivers/net/dsa/mt7530-mmio.c
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -12,6 +12,7 @@
 static const struct of_device_id mt7988_of_match[] = {
 	{ .compatible = "airoha,an7583-switch", .data = &mt753x_table[ID_AN7583], },
 	{ .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], },
+	{ .compatible = "econet,en7528-switch", .data = &mt753x_table[ID_EN7528], },
 	{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
 	{ /* sentinel */ },
 };
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3c2a3029b10c..6c8ed00ee9e7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2912,6 +2912,30 @@ static void en7581_mac_port_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
+static void en7528_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	switch (port) {
+	/* Ports which are connected to switch PHYs. There is no MII pinout. */
+	case 1 ... 4:
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+		break;
+
+	/* Port 6 is connected to SoC's GMAC at 1000 Mbps full duplex. There
+	 * is no MII pinout.
+	 */
+	case 6:
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_1000FD;
+		break;
+	}
+}
+
 static void
 mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		  phy_interface_t interface)
@@ -3101,17 +3125,24 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
 				    struct phylink_config *config)
 {
 	struct mt7530_priv *priv = ds->priv;
-	u32 eeecr;
 
 	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
 
-	config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
-
-	eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
-	/* tx_lpi_timer should be in microseconds. The time units for
-	 * LPI threshold are unspecified.
+	/* The EN7528 GPHYs report EEE capability, but negotiating EEE with
+	 * common link partners (e.g. Realtek GbE NICs) results in an unstable
+	 * link with dropped frames. Leave the LPI capabilities empty so that
+	 * phylink disables EEE on these PHYs and refuses to enable it from
+	 * userspace.
 	 */
-	config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr);
+	if (priv->id != ID_EN7528) {
+		u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+
+		config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
+		/* tx_lpi_timer should be in microseconds. The time units for
+		 * LPI threshold are unspecified.
+		 */
+		config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr);
+	}
 
 	priv->info->mac_port_get_caps(ds, port, config);
 }
@@ -3254,7 +3285,8 @@ mt753x_conduit_state_change(struct dsa_switch *ds,
 	 * forwarded to the numerically smallest CPU port whose conduit
 	 * interface is up.
 	 */
-	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621 &&
+	    priv->id != ID_EN7528)
 		return;
 
 	mask = BIT(cpu_dp->index);
@@ -3459,6 +3491,16 @@ const struct mt753x_info mt753x_table[] = {
 		.phy_write_c45 = mt7531_ind_c45_phy_write,
 		.mac_port_get_caps = en7581_mac_port_get_caps,
 	},
+	[ID_EN7528] = {
+		.id = ID_EN7528,
+		.pcs_ops = &mt7530_pcs_ops,
+		.sw_setup = mt7988_setup,
+		.phy_read_c22 = mt7531_ind_c22_phy_read,
+		.phy_write_c22 = mt7531_ind_c22_phy_write,
+		.phy_read_c45 = mt7531_ind_c45_phy_read,
+		.phy_write_c45 = mt7531_ind_c45_phy_write,
+		.mac_port_get_caps = en7528_mac_port_get_caps,
+	},
 };
 EXPORT_SYMBOL_GPL(mt753x_table);
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index dd33b0df3419..5f1e841f42c0 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -21,6 +21,7 @@ enum mt753x_id {
 	ID_MT7988 = 3,
 	ID_EN7581 = 4,
 	ID_AN7583 = 5,
+	ID_EN7528 = 6,
 };
 
 #define	NUM_TRGMII_CTRL			5