github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-28 17:13:52 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

i.MX ARM device tree change for 6.6:

Browse Source 
- New device tree for TQ-Systems MBLS102xA board.
 - A bunch of dtschema warning fixes from Fabio Estevam and
   Krzysztof Kozlowski.
 - Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
 - Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
 - Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
   for phycore and pfla02 boards.
 - Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmTYiAkUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7yWwf+IH6IzUJdwMCbQIsB2yyqj1l/emqz
 aZF38kaLAp/XuY4wwjY9Kr0fmr9igh/TAdsF4JSfZUURY5XNFm6orb3CCA/Dxkm2
 cMYwJTL5ynb+RsrK1T+W6gaVoLPuSWte2neIpYj3NCKGg5z0TQnaZ0tqVWeEZL6N
 4zD3aBgR1eRndSX0fH88Vr+Wj6fMNXumOYA6tjP4t4p41Qz+7i/SIhGTJuOp8WLN
 DqfslwDWWPjM5zw+Hbf7t9Nkx122raQbzCF38XWZa5SE8SIZYu3Jabn24FB3WGCp
 FZDu9fwImjdJ1mrBtubfGhku6ebnPDoAVDV0M5Sr8Afn/ptavRFKm9og6Q==
 =HRtG
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTanvAACgkQYKtH/8kJ
 UifZQBAA1jpnAWuYfMP5nJ2SVu6JxE9KXcZXwacfmEJDKuMOb8Mv/aNCE0V3J3zJ
 KhNZHrNFKTK/EMqXHeFJmTpEEx/bqDaqP86CeaEUkFF10mMO0KW1oiHWipNLym1+
 jYnYQSXkh78PPmtG9pXrPGt4YQq0HuEvDREcWYSqHtO3huPs1TzzY3VLewAIRiX0
 a5Mpbg5mlNskP3OBtL1z0WlAERuDzg57vm/9AfW2yDvzTEX3awb7VXDHXpO8h3nI
 WWRLGJYqRBDS3szyZt3uvf4JLMuKJM/kZJfRobUibg7wdQ9jo//LlhDgnop2e//d
 fX1MuNiNPrsObhksVvhEOwz4cgkvPTEhq7b9sG6UB/OGWfQYbvvQSlgRKOFSiGLP
 HUNgOmdNEXqyF1TycWmfoF4PUBu1T3XjJj7gSkMW1/jrjHux7tYTvb08MMO7mxub
 dL0QwI980QxkeRW2YA64ca35Q/p18cJ2kk+/uYAi8GSJawAoAOVGo8SxstgU3B+6
 uooXO28IvUW3LT32lnH9+1i4xhjh1MjEBQWYfbQKIPnLYPyTlaMrves+S5gXdRho
 d337UGhMfk4RNHi39XE8c4a8mvUdIh4FSMc/KhTOcapQbskgnea9w9Cp/7OmOSao
 Z0SjMZjdhnGKNFmhHh+mvlgUJKEcWcdduQlQdyUuU/hNMtVfN5g=
 =qeo8
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree change for 6.6:

- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
  Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
  for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.

* tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
  ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
  ARM: dts: imx6ul: Fix nand-controller #size-cells
  ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
  ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
  ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
  ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
  ARM: dts: imx53-smd: Remove invalid SPI flash entry
  ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
  ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: imx: Remove 'compatible' from the pfuze nodes
  ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
  ARM: dts: nxp: mxs: split interrupts per cells
  ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
  ARM: dts: imx28: drop incorrect reg in fixed regulators
  ARM: dts: imx27: drop incorrect reg in fixed regulators
  ARM: dts: imx25: drop incorrect reg in fixed regulators
  ARM: dts: imx23: drop incorrect reg in fixed regulators
  ARM: dts: imx50-kobo-aura: switch to enable-gpios
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2023-08-14 23:38:26 +02:00
commit a5c3378290
106 changed files with 1424 additions and 1180 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
View File

@ -58,10 +58,8 @@ eth: eth@4,c00000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eth>;
compatible = "davicom,dm9000";
reg = <
4 0x00c00000 0x2
4 0x00c00002 0x2
>;
reg = <4 0x00c00000 0x2>,
<4 0x00c00002 0x2>;
interrupt-parent = <&gpio2>;
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
fsl,weim-cs-timing = <0x0000c700 0x19190d01>;

25
arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
View File

@ -30,22 +30,15 @@ qvga_timings: 320x240 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_lcd_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd_3v3: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};

71
arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
View File

@ -14,20 +14,13 @@ chosen {
stdout-path = &uart1;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_phy: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-phy";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 9 0>;
enable-active-high;
};
reg_fec_phy: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "fec-phy";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 9 0>;
enable-active-high;
};
memory@80000000 {
@ -39,46 +32,46 @@ memory@80000000 {
&iomuxc {
pinctrl_uart1: uart1grp {
fsl,pins = <
MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
MX25_PAD_UART1_TXD__UART1_TXD 0x00000020
MX25_PAD_UART1_RXD__UART1_RXD 0x000000a0
MX25_PAD_UART1_CTS__UART1_CTS 0x00000060
MX25_PAD_UART1_RTS__UART1_RTS 0x000000e0
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
MX25_PAD_D11__GPIO_4_9 0x00000021 /* FEC PHY power on pin */
MX25_PAD_D13__GPIO_4_7 0x000000a1 /* FEC reset */
MX25_PAD_FEC_MDC__FEC_MDC 0x00000060
MX25_PAD_FEC_MDIO__FEC_MDIO 0x000001f0
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x00000060
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x00000060
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x00000060
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x000000c1
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x000000c0
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x000000c0
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x000000c0
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX25_PAD_NF_CE0__NF_CE0 0x80000000
MX25_PAD_NF_CE0__NF_CE0 0x00000001
MX25_PAD_NFWE_B__NFWE_B 0x80000000
MX25_PAD_NFRE_B__NFRE_B 0x80000000
MX25_PAD_NFALE__NFALE 0x80000000
MX25_PAD_NFCLE__NFCLE 0x80000000
MX25_PAD_NFWP_B__NFWP_B 0x80000000
MX25_PAD_NFRB__NFRB 0x80000000
MX25_PAD_D7__D7 0x80000000
MX25_PAD_D6__D6 0x80000000
MX25_PAD_D5__D5 0x80000000
MX25_PAD_D4__D4 0x80000000
MX25_PAD_D3__D3 0x80000000
MX25_PAD_D2__D2 0x80000000
MX25_PAD_D1__D1 0x80000000
MX25_PAD_D0__D0 0x80000000
MX25_PAD_NFRB__NFRB 0x000000e0
MX25_PAD_D7__D7 0x00000080
MX25_PAD_D6__D6 0x00000080
MX25_PAD_D5__D5 0x00000080
MX25_PAD_D4__D4 0x00000080
MX25_PAD_D3__D3 0x00000080
MX25_PAD_D2__D2 0x00000080
MX25_PAD_D1__D1 0x00000000
MX25_PAD_D0__D0 0x00000080
>;
};
};

62
arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
View File

@ -16,45 +16,35 @@ memory@80000000 {
reg = <0x80000000 0x4000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_3v3: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 3 0>;
enable-active-high;
};
reg_fec_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 3 0>;
enable-active-high;
};
reg_2p5v: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_2p5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_3p3v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 6 0>;
};
reg_can_3v3: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 6 0>;
};
sound {

19
arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
View File

@ -54,19 +54,12 @@ user {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_max5821: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "max5821-reg";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_max5821: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "max5821-reg";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
};

25
arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
View File

@ -54,22 +54,15 @@ led2 {
};
};
regulators {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-bus";
reg_lcd: regulator@0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdreg>;
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "LCD";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdreg>;
regulator-name = "LCD";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};

19
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
View File

@ -33,19 +33,12 @@ timing0: 640x480 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3v3: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};

21
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
View File

@ -37,18 +37,15 @@ timing0: 240x320 {
};
};
regulators {
regulator@2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csien>;
reg = <2>;
regulator-name = "CSI_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
regulator-2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csien>;
regulator-name = "CSI_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
usbphy {

30
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
View File

@ -15,26 +15,18 @@ memory@a0000000 {
reg = <0xa0000000 0x08000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_5v0: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_5v0: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
usbphy {

2
arch/arm/boot/dts/nxp/imx/imx27.dtsi
View File

@ -534,7 +534,7 @@ sahara2: crypto@10025000 {
clock-names = "ipg", "ahb";
};
clks: ccm@10027000{
clks: ccm@10027000 {
compatible = "fsl,imx27-ccm";
reg = <0x10027000 0x1000>;
#clock-cells = <1>;

2
arch/arm/boot/dts/nxp/imx/imx31.dtsi
View File

@ -232,7 +232,7 @@ bus@53f00000 { /* AIPS2 */
reg = <0x53f00000 0x100000>;
ranges;
clks: ccm@53f80000{
clks: ccm@53f80000 {
compatible = "fsl,imx31-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>, <53>;

2
arch/arm/boot/dts/nxp/imx/imx50-evk.dts
View File

@ -23,7 +23,7 @@ &cspi {
cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
status = "okay";
flash: m25p32@1 {
flash: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p32", "jedec,spi-nor";

2
arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
View File

@ -73,7 +73,7 @@ sd2_vmmc: gpio-regulator {
states = <3300000 0>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
enable-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
};
};

2
arch/arm/boot/dts/nxp/imx/imx50.dtsi
View File

@ -335,7 +335,7 @@ src: reset-controller@53fd0000 {
#reset-cells = <1>;
};
clks: ccm@53fd4000{
clks: ccm@53fd4000 {
compatible = "fsl,imx50-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;

25
arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
View File

@ -173,22 +173,15 @@ led-diagnostic {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_hub_reset: regulator@0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgreg>;
reg = <0>;
regulator-name = "hub_reset";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_hub_reset: regulator-hub-reset {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgreg>;
regulator-name = "hub_reset";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {

23
arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
View File

@ -45,21 +45,14 @@ led1 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_can: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "CAN_RST";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <20000>;
enable-active-high;
};
reg_can: regulator-can {
compatible = "regulator-fixed";
regulator-name = "CAN_RST";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <20000>;
enable-active-high;
};
sound {

2
arch/arm/boot/dts/nxp/imx/imx51.dtsi
View File

@ -455,7 +455,7 @@ src: reset-controller@73fd0000 {
#reset-cells = <1>;
};
clks: ccm@73fd4000{
clks: ccm@73fd4000 {
compatible = "fsl,imx51-ccm";
reg = <0x73fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;

19
arch/arm/boot/dts/nxp/imx/imx53-ard.dts
View File

@ -43,19 +43,12 @@ ethernet@f4000000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
gpio-keys {

34
arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
View File

@ -15,28 +15,20 @@ memory@70000000 {
<0xb0000000 0x20000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p2v: regulator-3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_3p2v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_backlight: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd-supply";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_backlight: regulator-backlight {
compatible = "regulator-fixed";
regulator-name = "lcd-supply";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
};

34
arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
View File

@ -65,28 +65,20 @@ led-user2 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 0>;
};
reg_usbh1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 0>;
};
reg_usb_otg_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 4 0>;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 4 0>;
};
sound {

33
arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
View File

@ -38,27 +38,19 @@ display1_in: endpoint {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_backlight: regulator-backlight {
compatible = "regulator-fixed";
regulator-name = "lcd-supply";
gpio = <&gpio2 5 0>;
startup-delay-us = <5000>;
};
reg_backlight: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "lcd-supply";
gpio = <&gpio2 5 0>;
startup-delay-us = <5000>;
};
reg_3p2v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_3p2v: regulator-3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
sound {
@ -169,6 +161,7 @@ &i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;

65
arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
View File

@ -16,6 +16,13 @@ memory@70000000 {
<0xb0000000 0x20000000>;
};
backlight_parallel: backlight-parallel {
compatible = "pwm-backlight";
pwms = <&pwm2 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
display0: disp0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
@ -80,6 +87,10 @@ led-user {
panel {
compatible = "sii,43wvf1g";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display_power>;
backlight = <&backlight_parallel>;
enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
@ -88,29 +99,21 @@ panel_in: endpoint {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p2v: regulator-3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_3p2v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_usb_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 8 0>;
enable-active-high;
};
reg_usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 8 0>;
enable-active-high;
};
sound {
@ -202,6 +205,12 @@ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
>;
};
pinctrl_display_power: displaypowergrp {
fsl,pins = <
MX53_PAD_EIM_D24__GPIO3_24 0x1e4
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
@ -292,6 +301,12 @@ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX53_PAD_GPIO_1__PWM2_PWMO 0x5
>;
};
pinctrl_vga_sync: vgasync-grp {
fsl,pins = <
/* VGA_HSYNC, VSYNC with max drive strength */
@ -367,6 +382,12 @@ &fec {
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&sata {
status = "okay";
};

4
arch/arm/boot/dts/nxp/imx/imx53-smd.dts
View File

@ -67,10 +67,10 @@ zigbee: mc1323@0 {
reg = <0>;
};
flash: m25p32@1 {
flash: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;

19
arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
View File

@ -15,19 +15,12 @@ memory@70000000 {
reg = <0x70000000 0x40000000>; /* Up to 1GiB */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};

36
arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
View File

@ -15,29 +15,21 @@ memory@70000000 {
<0xb0000000 0x20000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 31 0>; /* PEN */
enable-active-high;
};
reg_usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 31 0>; /* PEN */
enable-active-high;
};
};

2
arch/arm/boot/dts/nxp/imx/imx53.dtsi
View File

@ -595,7 +595,7 @@ src: reset-controller@53fd0000 {
#reset-cells = <1>;
};
clks: ccm@53fd4000{
clks: ccm@53fd4000 {
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;

2
arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
View File

@ -257,7 +257,7 @@ sound {
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,widgets = "Speaker", "Ext Spk";
simple-audio-card,audio-routing = "Ext Spk", "LINE";
simple-audio-card,routing = "Ext Spk", "LINE";
simple-audio-card,cpu {
sound-dai = <&ssi1>;

1
arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
View File

@ -172,6 +172,7 @@ &i2c1 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

36
arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
View File

@ -17,29 +17,21 @@ memory@10000000 {
reg = <0x10000000 0x80000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
leds {

2
arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
View File

@ -314,7 +314,6 @@ sw2_reg: sw2 {
};
sw3a_reg: sw3a {
compatible = "regulator-fixed";
regulator-name = "DDR_1V5a";
regulator-boot-on;
regulator-always-on;
@ -322,7 +321,6 @@ sw3a_reg: sw3a {
};
sw3b_reg: sw3b {
compatible = "regulator-fixed";
regulator-name = "DDR_1V5b";
regulator-boot-on;
regulator-always-on;

1
arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
View File

@ -228,6 +228,7 @@ mux1_i2c4: i2c@3 {
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&mclk>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;

2
arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
View File

@ -263,7 +263,7 @@ &ecspi1 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};

55
arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
View File

@ -28,40 +28,31 @@ memory@10000000 {
reg = <0x10000000 0x80000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_switch: regulator-usb-otg-switch {
compatible = "regulator-fixed";
regulator-name = "usb_otg_switch";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 12 0>;
regulator-boot-on;
regulator-always-on;
};
reg_usb_otg_switch: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_otg_switch";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 12 0>;
regulator-boot-on;
regulator-always-on;
};
reg_usb_host1: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_host1_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 31 0>;
enable-active-high;
};
reg_usb_host1: regulator-usb-host1 {
compatible = "regulator-fixed";
regulator-name = "usb_host1_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 31 0>;
enable-active-high;
};
gpio-leds {

1
arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
View File

@ -96,6 +96,7 @@ &i2c1 {
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
lrclk-strength = <0x3>;
VDDA-supply = <&reg_1p8v>;

19
arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
View File

@ -19,19 +19,12 @@ memory@10000000 {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
gpio-keys {

67
arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
View File

@ -67,47 +67,37 @@ pps {
status = "okay";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_1p0v: regulator-1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_1p0v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_h1_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {
@ -320,6 +310,7 @@ accelerometer: mma8450@1c {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
View File

@ -179,6 +179,7 @@ rtc: pcf8523@68 {
sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_h100_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;

1
arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
View File

@ -196,6 +196,7 @@ codec: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_1p8v>;

5
arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
View File

@ -359,8 +359,11 @@ &usdhc2 {
keep-power-in-suspend;
status = "okay";
wifi {
#address-cells = <1>;
#size-cells = <0>;
wifi@2 {
compatible = "ti,wl1271";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi>;
interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;

1
arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
View File

@ -141,6 +141,7 @@ sgtl5000: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};

1
arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
View File

@ -181,6 +181,7 @@ &i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;

4
arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
View File

@ -301,12 +301,12 @@ &i2c4 {
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
eeprom@50{
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@57{
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};

2
arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
View File

@ -26,7 +26,7 @@ backlight: backlight {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
id-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};

30
arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
View File

@ -2,26 +2,18 @@
#include <dt-bindings/gpio/gpio.h>
/ {
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
dummy_reg: regulator-dummy {
compatible = "regulator-fixed";
regulator-name = "dummy-supply";
};
dummy_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "dummy-supply";
};
reg_usb_otg_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
chosen {

1
arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
View File

@ -455,6 +455,7 @@ &i2c3 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
View File

@ -452,6 +452,7 @@ &i2c3 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;

85
arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
View File

@ -114,57 +114,47 @@ pps {
status = "okay";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_1p0v: regulator-1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_1p0v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_h1_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound-analog {
@ -509,6 +499,7 @@ &i2c3 {
sgtl5000: audio-codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;

6
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
View File

@ -36,21 +36,21 @@ gpio_buttons: gpio-buttons {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiobuttons>;
button1 {
button-1 {
label = "s6";
linux,code = <KEY_F6>;
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
wakeup-source;
};
button2 {
button-2 {
label = "s7";
linux,code = <KEY_F7>;
gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
wakeup-source;
};
button3 {
button-3 {
label = "s8";
linux,code = <KEY_F8>;
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;

2
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
View File

@ -15,6 +15,7 @@ &i2c1 {
lm75: temperature-sensor@49 {
compatible = "national,lm75";
reg = <0x49>;
vs-supply = <&reg_mba6_3p3v>;
};
m24c64_57: eeprom@57 {
@ -23,6 +24,7 @@ m24c64_57: eeprom@57 {
pagesize = <32>;
#address-cells = <1>;
#size-cells = <1>;
vcc-supply = <&reg_mba6_3p3v>;
mba_mac_address: mac-address@20 {
reg = <0x20 0x6>;

2
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
View File

@ -25,6 +25,7 @@ &i2c3 {
lm75: temperature-sensor@49 {
compatible = "national,lm75";
reg = <0x49>;
vs-supply = <&reg_mba6_3p3v>;
};
m24c64_57: eeprom@57 {
@ -33,6 +34,7 @@ m24c64_57: eeprom@57 {
pagesize = <32>;
#address-cells = <1>;
#size-cells = <1>;
vcc-supply = <&reg_mba6_3p3v>;
mba_mac_address: mac-address@20 {
reg = <0x20 0x6>;

75
arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
View File

@ -15,51 +15,41 @@ memory@10000000 {
reg = <0x10000000 0x20000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_2p5v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_wlan_vmmc: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_wlan_vmmc: regulator-wlan-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
gpio-keys {
@ -236,6 +226,7 @@ codec: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

130
arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
View File

@ -15,83 +15,70 @@ memory@10000000 {
reg = <0x10000000 0xF0000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_2p5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_h1_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_wlan_vmmc: regulator-wlan-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_wlan_vmmc: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_can_xcvr: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_can_xcvr: regulator-can-xcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
gpio-keys {
@ -378,6 +365,7 @@ codec: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
View File

@ -286,6 +286,7 @@ codec: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

115
arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
View File

@ -17,74 +17,62 @@ memory@10000000 {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_2p5v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_can_xcvr: regulator-can-xcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_can_xcvr: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_wlan_vmmc: regulator-wlan-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_wlan_vmmc: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_usb_h1_vbus: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
gpio-keys {
@ -309,6 +297,7 @@ &i2c1 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

26
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
View File

@ -10,22 +10,18 @@ chosen {
stdout-path = &uart4;
};
regulators {
sound_1v8: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "i2s-audio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
sound_1v8: regulator-sound-1v8 {
compatible = "regulator-fixed";
regulator-name = "i2s-audio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
sound_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "i2s-audio-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
sound_3v3: regulator-sound-3v3 {
compatible = "regulator-fixed";
regulator-name = "i2s-audio-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
tlv320_mclk: oscillator {

50
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
View File

@ -14,32 +14,24 @@ memory@10000000 {
reg = <0x10000000 0x80000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
enable-active-high;
};
reg_usb_h1_vbus: regulator@1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
reg = <1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
enable-active-high;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
enable-active-high;
};
gpio_leds: leds {
@ -464,3 +456,11 @@ &usdhc3 {
vmmc-supply = <&vdd_sd0_reg>;
status = "disabled";
};
&wdog1 {
/*
* Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
* used for reboot, does not reset all external PMIC voltages on reset.
*/
status = "disabled";
};

8
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
View File

@ -309,3 +309,11 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
};
&wdog1 {
/*
* Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
* used for reboot, does not reset all external PMIC voltages on reset.
*/
status = "disabled";
};

58
arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
View File

@ -13,41 +13,32 @@ chosen {
stdout-path = &uart1;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbh1_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
pinctrl-names = "default";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-otg-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
leds {
@ -120,6 +111,7 @@ &i2c1 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;

137
arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
View File

@ -24,88 +24,74 @@ memory@10000000 {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_2p5v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_usb_otg_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
reg_can_xcvr: regulator-can-xcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_can_xcvr: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_1p5v: regulator-1p5v {
compatible = "regulator-fixed";
regulator-name = "1P5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reg_1p5v: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "1P5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_1p8v: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_2p8v: regulator-2p8v {
compatible = "regulator-fixed";
regulator-name = "2P8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
reg_2p8v: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "2P8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
reg_usb_h1_vbus: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
mipi_xclk: mipi_xclk {
@ -334,6 +320,7 @@ &i2c1 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
View File

@ -30,6 +30,7 @@ pmic: pmic@8 {
sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
vs-supply = <&reg_3p3v>;
};
eeprom@50 {

1
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
View File

@ -23,6 +23,7 @@ pmic: pmic@8 {
sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
vs-supply = <&reg_3p3v>;
};
eeprom@50 {

1
arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
View File

@ -235,6 +235,7 @@ sgtl5000: codec@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;

36
arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
View File

@ -59,29 +59,21 @@ panel_in: endpoint {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
gpio = <&gpio7 12 0>;
};
reg_usb_h1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
gpio = <&gpio7 12 0>;
};
reg_panel: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd_panel";
enable-active-high;
gpio = <&gpio1 2 0>;
};
reg_panel: regulator-panel {
compatible = "regulator-fixed";
regulator-name = "lcd_panel";
enable-active-high;
gpio = <&gpio1 2 0>;
};
sound {

1
arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
View File

@ -119,6 +119,7 @@ codec: sgtl5000@a {
pinctrl-0 = <&pinctrl_mclk>;
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

2
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
View File

@ -72,7 +72,6 @@ reg_wlan: regulator-wlan {
pinctrl-0 = <&pinctrl_reg_wlan>;
compatible = "regulator-fixed";
clocks = <&clks IMX6SX_CLK_CKO>;
clock-names = "slow";
regulator-name = "wlan-en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -196,6 +195,7 @@ codec: sgtl5000@a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6SX_CLK_CKO2>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_1p8v>;

6
arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
View File

@ -221,7 +221,7 @@ dma_apbh: dma-controller@1804000 {
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
gpmi: nand-controller@1806000{
gpmi: nand-controller@1806000 {
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@ -1306,6 +1306,10 @@ lcdif1: lcdif@2220000 {
<&clks IMX6SX_CLK_LCDIF_APB>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clks IMX6SX_CLK_LCDIF1_PRE_SEL>,
<&clks IMX6SX_CLK_LCDIF1_SEL>;
assigned-clock-parents = <&clks IMX6SX_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6SX_CLK_LCDIF1_PODF>;
power-domains = <&pd_disp>;
status = "disabled";

4
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
View File

@ -442,14 +442,14 @@ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
>;
};
pinctrl_flexcan1: flexcan1grp{
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
>;
};
pinctrl_flexcan2: flexcan2grp{
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020

2
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
View File

@ -145,7 +145,7 @@ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051
>;
};
pinctrl_flexcan1: flexcan1grp{
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020
MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020

6
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
View File

@ -291,20 +291,20 @@ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp{
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
>;
};
pinctrl_flexcan2: flexcan2grp{
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
>;
};
pinctrl_goodix_touch: goodixgrp{
pinctrl_goodix_touch: goodixgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
>;

1
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
View File

@ -114,7 +114,6 @@ vrefddr: vrefddr {
};
vdda_adc_3v3: vldo1 {
compatible = "regulator-fixed";
regulator-name = "vref-adc-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

1
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
View File

@ -148,7 +148,6 @@ sgtl5000: codec@a {
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clks IMX6UL_CLK_OSC>;
clock-names = "mclk";
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p8v>;

2
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
View File

@ -272,7 +272,7 @@ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp{
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020

1
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
View File

@ -40,6 +40,7 @@ &i2c2 {
sgtl5000: audio-codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
View File

@ -51,6 +51,7 @@ &i2c2 {
sgtl5000: codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
View File

@ -51,6 +51,7 @@ &i2c2 {
sgtl5000: codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

2
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
View File

@ -133,7 +133,7 @@ &lcdif {
pinctrl-0 = <&pinctrl_disp0_3>;
};
&reg_usbotg_vbus{
&reg_usbotg_vbus {
status = "disabled";
};

2
arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
View File

@ -179,7 +179,7 @@ dma_apbh: dma-controller@1804000 {
gpmi: nand-controller@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
#size-cells = <0>;
reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;

1
arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
View File

@ -102,7 +102,6 @@ reg_eth_phy: regulator-eth-phy {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "+V3.3_ETH";
regulator-type = "voltage";
vin-supply = <&reg_module_3v3>;
clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
startup-delay-us = <150000>;

2
arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
View File

@ -29,7 +29,7 @@ chosen {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
id-gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};

1
arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
View File

@ -40,6 +40,7 @@ &i2c1 {
sgtl5000: audio-codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

1
arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
View File

@ -51,6 +51,7 @@ &i2c1 {
sgtl5000: audio-codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;

2
arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
View File

@ -509,7 +509,7 @@ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
>;
};
pinctrl_pwm4: pwm4grp{
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x7f
>;

5
arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
View File

@ -10,6 +10,11 @@ / {
model = "Freescale i.MX7 SabreSD Board";
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
aliases {
ethernet0 = &fec1;
ethernet1 = &fec2;
};
chosen {
stdout-path = &uart1;
};

2
arch/arm/boot/dts/nxp/imx/imx7s.dtsi
View File

@ -1269,7 +1269,7 @@ dma_apbh: dma-controller@33000000 {
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
};
gpmi: nand-controller@33002000{
gpmi: nand-controller@33002000 {
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;

3
arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
View File

@ -277,10 +277,9 @@ analog_touch: touchscreen@41 {
reg = <0x41>;
interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio4>;
interrupt-controller;
status = "disabled";
stmpe_touchscreen {
touchscreen {
compatible = "st,stmpe-ts";
st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
st,ave-ctrl = <3>; /* 8 sample average control */

1
arch/arm/boot/dts/nxp/ls/Makefile
View File

@ -3,5 +3,6 @@ dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-iot.dtb \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
ls1021a-tqmls1021a-mbls1021a.dtb \
ls1021a-tsn.dtb \
ls1021a-twr.dtb

10
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
View File

@ -62,19 +62,19 @@ simple-audio-card,codec {
};
};
&can0{
&can0 {
status = "disabled";
};
&can1{
&can1 {
status = "disabled";
};
&can2{
&can2 {
status = "disabled";
};
&can3{
&can3 {
status = "okay";
};
@ -125,7 +125,7 @@ &enet2 {
status = "okay";
};
&esdhc{
&esdhc {
status = "okay";
};

405
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts Normal file
View File

@ -0,0 +1,405 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
* Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Alexander Stein
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/leds/leds-pca9532.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "ls1021a-tqmls1021a.dtsi"
/ {
model = "TQMLS102xA SOM on MBLS102xA";
compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
audio_mclk: audio-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
backlight_dcu: backlight {
compatible = "gpio-backlight";
gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
status = "disabled";
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
switch-1 {
label = "S6";
linux,code = <BTN_0>;
gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
};
btn2: switch-2 {
label = "S7";
linux,code = <BTN_1>;
gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
};
switch-3 {
label = "S8";
linux,code = <BTN_2>;
gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
function-enumerator = <0>;
gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
function-enumerator = <1>;
gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
function-enumerator = <2>;
gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_HEARTBEAT;
function-enumerator = <0>;
gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
lvds_encoder: lvds-encoder {
compatible = "ti,sn75lvds83", "lvds-encoder";
power-supply = <&reg_3p3v>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds_encoder_in: endpoint {};
};
port@1 {
reg = <1>;
lvds_encoder_out: endpoint {};
};
};
};
reg_1p2v: regulator-1p2v {
compatible = "regulator-fixed";
regulator-name = "1P2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
vin-supply = <&reg_3p3v>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
hdmi_out: hdmi {
compatible = "hdmi-connector";
type = "a";
ddc-i2c-bus = <&i2c0>;
status = "disabled";
port {
hdmi_in: endpoint {
remote-endpoint = <&sii9022a_out>;
};
};
};
display: panel {
backlight = <&backlight_dcu>;
enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
port {
panel_in: endpoint {};
};
};
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
model = "ls1021a-mbls1021a-tlv320aic32";
ssi-controller = <&sai1>;
audio-codec = <&tlv320aic32x4>;
};
};
&can0 {
xceiver-supply = <&reg_3p3v>;
status = "okay";
};
&can1 {
xceiver-supply = <&reg_3p3v>;
status = "okay";
};
&dspi0 {
status = "okay";
};
&enet0 {
phy-handle = <&rgmii_phy0c>;
phy-mode = "rgmii-id";
mac-address = [ 00 00 00 00 00 00 ];
status = "okay";
};
&enet1 {
tbi-handle = <&tbi1>;
phy-handle = <&sgmii_phy03>;
phy-mode = "sgmii";
mac-address = [ 00 00 00 00 00 00 ];
status = "okay";
};
&enet2 {
phy-handle = <&rgmii_phy04>;
phy-mode = "rgmii-id";
mac-address = [ 00 00 00 00 00 00 ];
status = "okay";
};
&i2c0 {
status = "okay";
tlv320aic32x4: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
clocks = <&audio_mclk>;
clock-names = "mclk";
ldoin-supply = <&reg_3p3v>;
iov-supply = <&reg_3p3v>;
};
pca9554_0: gpio-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
vcc-supply = <&reg_3p3v>;
gpio-line-names = "BUTTON0", "BUTTON1",
"BUTTON2", "EMMC_SEL",
"DIP2", "DIP3",
"EXT_TOUCH_INT", "GPIO_1";
};
pca9554_1: gpio-expander@21 {
compatible = "nxp,pca9554";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
vcc-supply = <&reg_3p3v>;
gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
"MPCIE_WAKE#", "LCD_BLT_EN",
"LCD_PWR_EN", "EC1_PHY_PWDN",
"EC3_PHY_PWDN", "SGMII_PHY_PWDN";
};
pca9554_2: gpio-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&extirq>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
vcc-supply = <&reg_3p3v>;
gpio-line-names = "MUX_SEL0", "MUX_SEL1",
"MUX_SEL2", "MUX_SEL3",
"V95", "V96", "V97", "V98";
};
sii9022a: hdmi-transmitter@3b {
compatible = "sil,sii9022";
reg = <0x3b>;
iovcc-supply = <&reg_3p3v>;
cvcc12-supply = <&reg_1p2v>;
interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
#sound-dai-cells = <0>;
sil,i2s-data-lanes = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
sii9022a_in: endpoint {};
};
port@1 {
reg = <1>;
sii9022a_out: endpoint {
remote-endpoint = <&hdmi_in>;
};
};
};
};
stmpe811: port-expander@41 {
compatible = "st,stmpe811";
reg = <0x41>;
interrupt-parent = <&gpio0>;
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&reg_3p3v>;
vio-supply = <&reg_3p3v>;
gpio {
compatible = "st,stmpe-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
/* GPIO 5-7 used for touch */
st,norequest-mask = <0xf0>;
gpio-line-names = "GPIO_ADC_I2C1_1",
"GPIO_ADC_I2C1_2",
"GPIO_ADC_I2C1_3",
"GPIO_ADC_I2C1_4";
};
touchscreen {
compatible = "st,stmpe-ts";
status = "disabled";
};
};
pca9530: leds@60 {
compatible = "nxp,pca9530";
reg = <0x60>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "PWM_0", "PWM_1";
led-0 {
type = <PCA9532_TYPE_GPIO>;
};
led-1 {
type = <PCA9532_TYPE_GPIO>;
};
};
};
&i2c1 {
status = "okay";
};
&lpuart0 {
linux,rs485-enabled-at-boot-time;
status = "okay";
};
&mdio0 {
sgmii_phy03: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x03>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
ti,dp83867-rxctrl-strap-quirk;
};
rgmii_phy04: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x04>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
rgmii_phy0c: ethernet-phy@c {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0c>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
&pwm6 {
status = "okay";
};
&pwm7 {
status = "okay";
};
&sai1 {
status = "okay";
};
&sata {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb3 {
/*
* Although DR connector, VBUS is always driven, so
* restrict to host mode.
*/
dr_mode = "host";
status = "okay";
};

107
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi Normal file
View File

@ -0,0 +1,107 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
* Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Alexander Stein
*/
#include "ls1021a.dtsi"
/ {
model = "TQMLS102xA SOM";
compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
reg_3p3v_som: regulator-3p3v-som {
compatible = "regulator-fixed";
regulator-name = "3P3V_SOM";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&esdhc {
/* e-MMC over 8 data lines */
bus-width = <8>;
status = "okay";
};
&i2c0 {
status = "okay";
/* MC34VR500 DC/DC regulator at 0x8, managed by PMIC */
/* On-board PMC at 0x11 */
sa56004: temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&reg_3p3v_som>;
};
rtc0: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <12500>;
};
m24c64_54: eeprom@54 {
compatible = "atmel,24c64";
reg = <0x54>;
pagesize = <32>;
read-only;
vcc-supply = <&reg_3p3v_som>;
};
};
&mdio0 {
tbi1: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
&qspi {
status = "okay";
qflash0: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot@0 {
label = "U-Boot-PBL";
reg = <0x0 0xe0000>;
};
env@e0000 {
label = "U-Boot Environment";
reg = <0xe0000 0x10000>;
};
dtb@f0000 {
label = "DTB";
reg = <0xf0000 0x10000>;
};
linux@100000 {
label = "Linux";
reg = <0x100000 0x700000>;
};
rootfs@800000 {
label = "RootFS";
reg = <0x800000 0x3800000>;
};
};
};
};

23
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
View File

@ -101,21 +101,14 @@ usb0: usb@80080000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
gpio = <&gpio0 17 0>;
};
reg_usb0_vbus: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
gpio = <&gpio0 17 0>;
};
leds {

19
arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
View File

@ -59,18 +59,11 @@ duart: serial@80070000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_vddio_sd0: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
};

21
arch/arm/boot/dts/nxp/mxs/imx23.dtsi
View File

@ -62,8 +62,8 @@ icoll: interrupt-controller@80000000 {
dma_apbh: dma-controller@80004000 {
compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 0x2000>;
interrupts = <0 14 20 0
13 13 13 13>;
interrupts = <0>, <14>, <20>, <0>,
<13>, <13>, <13>, <13>;
#dma-cells = <1>;
dma-channels = <8>;
clocks = <&clks 15>;
@ -415,10 +415,10 @@ emi@80020000 {
dma_apbx: dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 0x2000>;
interrupts = <7 5 9 26
19 0 25 23
60 58 9 0
0 0 0 0>;
interrupts = <7>, <5>, <9>, <26>,
<19>, <0>, <25>, <23>,
<60>, <58>, <9>, <0>,
<0>, <0>, <0>, <0>;
interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
"saif0", "empty", "auart0-rx", "auart0-tx",
"auart1-rx", "auart1-tx", "saif1", "empty",
@ -431,7 +431,7 @@ dma_apbx: dma-apbx@80024000 {
dcp: crypto@80028000 {
compatible = "fsl,imx23-dcp";
reg = <0x80028000 0x2000>;
interrupts = <53 54>;
interrupts = <53>, <54>;
status = "okay";
};
@ -456,7 +456,7 @@ axi-ahb@8002e000 {
lcdif@80030000 {
compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
interrupts = <46 45>;
interrupts = <46>, <45>;
clocks = <&clks 38>;
status = "disabled";
};
@ -525,7 +525,8 @@ audio-in@8004c000 {
lradc: lradc@80050000 {
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
interrupts = <36>, <37>, <38>, <39>, <40>,
<41>, <42>, <43>, <44>;
status = "disabled";
clocks = <&clks 26>;
#io-channel-cells = <1>;
@ -568,7 +569,7 @@ pwm: pwm@80064000 {
timrot@80068000 {
compatible = "fsl,imx23-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <28 29 30 31>;
interrupts = <28>, <29>, <30>, <31>;
clocks = <&clks 28>;
};

34
arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
View File

@ -10,28 +10,20 @@ / {
model = "Armadeus Systems APF28Dev docking/development board";
compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb0_vbus: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 23 1>;
enable-active-high;
};
reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 23 1>;
enable-active-high;
};
reg_can0_vcc: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "can0_vcc";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_can0_vcc: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "can0_vcc";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
leds {

23
arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
View File

@ -64,20 +64,13 @@ mac0: ethernet@800f0000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
reg_usb1_vbus: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
};

23
arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
View File

@ -78,21 +78,14 @@ pca9555: pca9555@20 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
reg_usb1_vbus: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
spi-2 {

23
arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
View File

@ -14,21 +14,14 @@ / {
model = "Crystalfontz CFA-10057 Board";
compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
reg_usb1_vbus: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
backlight {

23
arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
View File

@ -14,21 +14,14 @@ / {
model = "Crystalfontz CFA-10058 Board";
compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb1_vbus: regulator@0 {
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10058>;
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
reg_usb1_vbus: regulator-0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10058>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
backlight {

2
arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
View File

@ -47,7 +47,7 @@ &mac0 {
status = "okay";
};
&pinctrl{
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_cpuimx283>;

82
arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
View File

@ -69,55 +69,45 @@ led1 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_lcd_3v3: regulator-1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb0_vbus: regulator-2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb0_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
pinctrl-names = "default";
pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb1_vbus: regulator-3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {

19
arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
View File

@ -14,19 +14,12 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};

Some files were not shown because too many files have changed in this diff Show More