dt-bindings: dma: convert atmel-dma.txt to YAML

Add a description, required properties, appropriate compatibles and
missing properties like clocks and clock-names which are not defined in
the text binding for all the SoCs that are supported by microchip.
Update the text binding name `atmel-dma.txt` to
`atmel,at91sam9g45-dma.yaml` for the files which reference to
`atmel-dma.txt`. Drop Tudor name from maintainers.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203-test-v4-1-a9ec3eded1c7@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/atmel,at91sam9g45-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Direct Memory Access Controller (DMA)
+
+maintainers:
+  - Ludovic Desroches <ludovic.desroches@microchip.com>
+
+description:
+  The Atmel Direct Memory Access Controller (DMAC) transfers data from a source
+  peripheral to a destination peripheral over one or more AMBA buses. One channel
+  is required for each source/destination pair. In the most basic configuration,
+  the DMAC has one master interface and one channel. The master interface reads
+  the data from a source and writes it to a destination. Two AMBA transfers are
+  required for each DMAC data transfer. This is also known as a dual-access transfer.
+  The DMAC is programmed via the APB interface.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9g45-dma
+      - atmel,at91sam9rl-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    description:
+      Must be <2>, used to represent the number of integer cells in the dma
+      property of client devices. The two cells in order are
+      1. The first cell represents the channel number.
+      2. The second cell is 0 for RX and 1 for TX transfers.
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-controller@ffffec00 {
+        compatible = "atmel,at91sam9g45-dma";
+        reg = <0xffffec00 0x200>;
+        interrupts = <21>;
+        #dma-cells = <2>;
+        clocks = <&pmc 2 20>;
+        clock-names = "dma_clk";
+    };
+
+...

Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -1,42 +0,0 @@
-* Atmel Direct Memory Access Controller (DMA)
-
-Required properties:
-- compatible: Should be "atmel,<chip>-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <2>, used to represent the number of integer cells in
-the dmas property of client devices.
-
-Example:
-
-dma0: dma@ffffec00 {
-	compatible = "atmel,at91sam9g45-dma";
-	reg = <0xffffec00 0x200>;
-	interrupts = <21>;
-	#dma-cells = <2>;
-};
-
-DMA clients connected to the Atmel DMA controller must use the format
-described in the dma.txt file, using a three-cell specifier for each channel:
-a phandle plus two integer cells.
-The three cells in order are:
-
-1. A phandle pointing to the DMA controller.
-2. The memory interface (16 most significant bits), the peripheral interface
-(16 less significant bits).
-3. Parameters for the at91 DMA configuration register which are device
-dependent:
-  - bit 7-0: peripheral identifier for the hardware handshaking interface. The
-  identifier can be different for tx and rx.
-  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
-
-Example:
-
-i2c0@i2c@f8010000 {
-	compatible = "atmel,at91sam9x5-i2c";
-	reg = <0xf8010000 0x100>;
-	interrupts = <9 4 6>;
-	dmas = <&dma0 1 7>,
-	       <&dma0 1 8>;
-	dma-names = "tx", "rx";
-};

Documentation/devicetree/bindings/misc/atmel-ssc.txt

@@ -14,7 +14,7 @@ Required properties:
 Required properties for devices compatible with "atmel,at91sam9g45-ssc":
 - dmas: DMA specifier, consisting of a phandle to DMA controller node,
   the memory interface and SSC DMA channel ID (for tx and rx).
-  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+  See Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml for details.
 - dma-names: Must be "tx", "rx".
 
 Optional properties:

MAINTAINERS

@@ -15347,7 +15347,7 @@ M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	dmaengine@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/dma/atmel-dma.txt
+F:	Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml
 F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_xdmac.c
 F:	include/dt-bindings/dma/at91.h