github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-28 17:13:52 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

dt-bindings: iio: adc: adi,ad7606: normalize textwidth

Browse Source 
Normalize textwidth to 80 columns on the descriptions.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Guillaume Stols 2024-07-02 17:34:05 +00:00 committed by Jonathan Cameron
parent 43ebc481ab
commit a3b4a48fd5
1 changed files with 24 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
View File

@ -40,60 +40,58 @@ properties:
adi,conversion-start-gpios:
description:
Must be the device tree identifier of the CONVST pin.
This logic input is used to initiate conversions on the analog
input channels. As the line is active high, it should be marked
GPIO_ACTIVE_HIGH.
Must be the device tree identifier of the CONVST pin. This logic input is
used to initiate conversions on the analog input channels. As the line is
active high, it should be marked GPIO_ACTIVE_HIGH.
maxItems: 1
reset-gpios:
description:
Must be the device tree identifier of the RESET pin. If specified,
it will be asserted during driver probe. As the line is active high,
it should be marked GPIO_ACTIVE_HIGH.
Must be the device tree identifier of the RESET pin. If specified, it will
be asserted during driver probe. As the line is active high, it should be
marked GPIO_ACTIVE_HIGH.
maxItems: 1
standby-gpios:
description:
Must be the device tree identifier of the STBY pin. This pin is used
to place the AD7606 into one of two power-down modes, Standby mode or
Must be the device tree identifier of the STBY pin. This pin is used to
place the AD7606 into one of two power-down modes, Standby mode or
Shutdown mode. As the line is active low, it should be marked
GPIO_ACTIVE_LOW.
maxItems: 1
adi,first-data-gpios:
description:
Must be the device tree identifier of the FRSTDATA pin.
The FRSTDATA output indicates when the first channel, V1, is
being read back on either the parallel, byte or serial interface.
As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA
output indicates when the first channel, V1, is being read back on either
the parallel, byte or serial interface. As the line is active high, it
should be marked GPIO_ACTIVE_HIGH.
maxItems: 1
adi,range-gpios:
description:
Must be the device tree identifier of the RANGE pin. The polarity on
this pin determines the input range of the analog input channels. If
this pin is tied to a logic high, the analog input range is ±10V for
all channels. If this pin is tied to a logic low, the analog input range
is ±5V for all channels. As the line is active high, it should be marked
Must be the device tree identifier of the RANGE pin. The polarity on this
pin determines the input range of the analog input channels. If this pin
is tied to a logic high, the analog input range is ±10V for all channels.
If this pin is tied to a logic low, the analog input range is ±5V for all
channels. As the line is active high, it should be marked
GPIO_ACTIVE_HIGH.
maxItems: 1
adi,oversampling-ratio-gpios:
description:
Must be the device tree identifier of the over-sampling
mode pins. As the line is active high, it should be marked
GPIO_ACTIVE_HIGH.
Must be the device tree identifier of the over-sampling mode pins. As the
line is active high, it should be marked GPIO_ACTIVE_HIGH.
maxItems: 3
adi,sw-mode:
description:
Software mode of operation, so far available only for ad7616 and ad7606b.
It is enabled when all three oversampling mode pins are connected to
high level. The device is configured by the corresponding registers. If the
adi,oversampling-ratio-gpios property is defined, then the driver will set the
oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired
to VDD.
It is enabled when all three oversampling mode pins are connected to high
level. The device is configured by the corresponding registers. If the
adi,oversampling-ratio-gpios property is defined, then the driver will set
the oversampling gpios to high. Otherwise, it is assumed that the pins are
hardwired to VDD.
type: boolean
required: