github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-01 19:13:47 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: rockchip: add overlay for qnap-ts233 device revision

Browse Source 
TS233 devices received a board revision adding gpios for per hard-disk
presence-detection and power-control. These boards have a PCB-id of at
least 12 (mainboard) and 11 (backplane), which can be read from an EEPROM.

The presence detection is not really necessary and there are also no
existing bindings for doing something with it. So add them as gpio hogs
to at least document them and allow their state to be read from debugfs.

The power-control is modelled as regulators, with the hdd1+hdd2 variants
connected to the RK3568's SATA controllers as target-supplies.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260201191804.41421-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Heiko Stuebner 2026-02-01 20:18:03 +01:00
parent 406c5515eb
commit a12bd8d24f
2 changed files with 98 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
arch/arm64/boot/dts/rockchip/Makefile
View File

@ -151,6 +151,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233-pcb-12-11.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433-pcb-12-10.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-cm3j-rpi-cm4.dtb
@ -263,6 +264,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2-screen.dtb
rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \
rk3399-rockpro64-screen.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233-pcb-12-11.dtb
rk3568-qnap-ts233-pcb-12-11-dtbs := rk3568-qnap-ts233.dtb \
rk3568-qnap-ts233-pcb-12-11.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433-pcb-12-10.dtb
rk3568-qnap-ts433-pcb-12-10-dtbs := rk3568-qnap-ts433.dtb \
rk3568-qnap-ts433-pcb-12-10.dtbo

93
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233-pcb-12-11.dtso Normal file
View File

@ -0,0 +1,93 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device tree overlay for TS233 board PCBs-12-11 revision.
*
* Copyright (C) 2025 Heiko Stuebner <heiko@sntech.de>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
&{/} {
/*
* The default hardware-state of this gpio causes the drive
* to be already running when entering the kernel.
* regulator-boot-on is needed to prevent one additional
* power-cycle on the drive.
*
* With regulator-boot-on we get the expected 1 cycle
* per boot, without it we end up with 2 cycles as seen
* via smartctl.
*/
hdd1_pwr: regulator-hdd1-power {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hdd1_power_pin>;
regulator-name = "hdd1-power";
regulator-boot-on;
vin-supply = <&dc_12v>;
};
hdd2_pwr: regulator-hdd2-power {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hdd2_power_pin>;
regulator-name = "hdd2-power";
regulator-boot-on;
vin-supply = <&dc_12v>;
};
};
&gpio2 {
hdd1-present-hog {
gpios = <RK_PA2 GPIO_ACTIVE_LOW>;
gpio-hog;
input;
line-name = "hdd1-present";
};
hdd2-present-hog {
gpios = <RK_PA1 GPIO_ACTIVE_LOW>;
gpio-hog;
input;
line-name = "hdd2-present";
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&hdd1_present_pin &hdd2_present_pin>;
hdd-power {
hdd1_power_pin: hdd1-power-pin {
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
hdd2_power_pin: hdd2-power-pin {
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdd-present {
hdd1_present_pin: hdd1-present-pin {
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
hdd2_present_pin: hdd2-present-pin {
rockchip,pins = <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&sata1_port0 {
target-supply = <&hdd2_pwr>;
};
&sata2_port0 {
target-supply = <&hdd1_pwr>;
};