diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 71019b167f8b..df6e09f7d242 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -609,6 +609,7 @@ config FB_TGA
 config FB_UVESA
 	tristate "Userspace VESA VGA graphics support"
 	depends on FB && CONNECTOR
+	depends on !UML
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2254,7 +2255,6 @@ config FB_SSD1307
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_DEFERRED_IO
-	select PWM
 	select FB_BACKLIGHT
 	help
 	  This driver implements support for the Solomon SSD1307
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 6bbcd9fc864e..77dbf94aae5f 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -376,7 +376,7 @@ static int read_control_sense(struct fb_info_control *p)
 #define CONTROL_PIXCLOCK_MIN	5000	/* ~ 200 MHz dot clock */
 
 /*
- * calculate the clock paramaters to be sent to CUDA according to given
+ * calculate the clock parameters to be sent to CUDA according to given
  * pixclock in pico second.
  */
 static int calc_clock_params(unsigned long clk, unsigned char *param)
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index c0143d38df83..14a7d404062c 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2450,7 +2450,8 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h, int charcount,
 
 	if (userfont) {
 		p->userfont = old_userfont;
-		REFCOUNT(data)--;
+		if (--REFCOUNT(data) == 0)
+			kfree(data - FONT_EXTRA_WORDS * sizeof(int));
 	}
 
 	vc->vc_font.width = old_width;
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 11922b009ed7..cd07e401b326 100644
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -1431,7 +1431,7 @@ static int fb_probe(struct platform_device *device)
 		dev_err(&device->dev,
 			"GLCD: kmalloc for frame buffer failed\n");
 		ret = -EINVAL;
-		goto err_release_fb;
+		goto err_disable_reg;
 	}
 
 	da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt;
@@ -1475,7 +1475,7 @@ static int fb_probe(struct platform_device *device)
 
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
-		goto err_release_fb;
+		goto err_disable_reg;
 	da8xx_fb_info->cmap.len = par->palette_sz;
 
 	/* initialize var_screeninfo */
@@ -1529,6 +1529,9 @@ static int fb_probe(struct platform_device *device)
 err_dealloc_cmap:
 	fb_dealloc_cmap(&da8xx_fb_info->cmap);
 
+err_disable_reg:
+	if (par->lcd_supply)
+		regulator_disable(par->lcd_supply);
 err_release_fb:
 	framebuffer_release(da8xx_fb_info);
 
diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 2398b3d48fed..305f1587bd89 100644
--- a/drivers/video/fbdev/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
@@ -552,12 +552,14 @@ static int ep93xxfb_probe(struct platform_device *pdev)
 
 	err = register_framebuffer(info);
 	if (err)
-		goto failed_check;
+		goto failed_framebuffer;
 
 	dev_info(info->dev, "registered. Mode = %dx%d-%d\n",
 		 info->var.xres, info->var.yres, info->var.bits_per_pixel);
 	return 0;
 
+failed_framebuffer:
+	clk_disable_unprepare(fbi->clk);
 failed_check:
 	if (fbi->mach_info->teardown)
 		fbi->mach_info->teardown(pdev);
diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index 2f8f0fb1dae2..b184085a78c2 100644
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
@@ -5,6 +5,7 @@
 config FB_GEODE
 	bool "AMD Geode family framebuffer support"
 	depends on FB && PCI && (X86_32 || (X86 && COMPILE_TEST))
+	depends on !UML
 	help
 	  Say 'Y' here to allow you to select framebuffer drivers for
 	  the AMD Geode family of processors.
diff --git a/drivers/video/fbdev/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
index f2e02958673d..727a10a59811 100644
--- a/drivers/video/fbdev/matrox/matroxfb_maven.c
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.c
@@ -1249,8 +1249,7 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
 	return 0;
 }
 
-static int maven_probe(struct i2c_client *client,
-		       const struct i2c_device_id *id)
+static int maven_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int err = -ENODEV;
@@ -1292,7 +1291,7 @@ static struct i2c_driver maven_driver={
 	.driver = {
 		.name	= "maven",
 	},
-	.probe		= maven_probe,
+	.probe_new	= maven_probe,
 	.remove		= maven_remove,
 	.id_table	= maven_id,
 };
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
index a9fd732f8103..0daaf9f89bab 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
@@ -178,53 +177,15 @@ static struct omap_dss_driver tvc_driver = {
 	.set_wss		= tvc_set_wss,
 };
 
-static int tvc_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_atv_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->invert_polarity = pdata->invert_polarity;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tvc_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tvc_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -232,16 +193,11 @@ static int tvc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tvc_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tvc_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = tvc_pal_timings;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
index 670b9c6eb5a9..8f9ff9fb4ca4 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <drm/drm_edid.h>
 
@@ -41,7 +42,7 @@ struct panel_drv_data {
 
 	struct omap_video_timings timings;
 
-	int hpd_gpio;
+	struct gpio_desc *hpd_gpio;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -155,8 +156,8 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	if (gpio_is_valid(ddata->hpd_gpio))
-		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	if (ddata->hpd_gpio)
+		return gpiod_get_value_cansleep(ddata->hpd_gpio);
 	else
 		return in->ops.hdmi->detect(in);
 }
@@ -197,31 +198,6 @@ static struct omap_dss_driver hdmic_driver = {
 	.set_hdmi_infoframe	= hdmic_set_infoframe,
 };
 
-static int hdmic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	/* HPD GPIO */
-	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
-	if (gpio_is_valid(gpio))
-		ddata->hpd_gpio = gpio;
-	else
-		ddata->hpd_gpio = -ENODEV;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int hdmic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -238,15 +214,18 @@ static int hdmic_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	r = hdmic_probe_of(pdev);
+	ddata->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->hpd_gpio);
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->hpd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
-				GPIOF_DIR_IN, "hdmi_hpd");
-		if (r)
-			goto err_reg;
+	gpiod_set_consumer_name(ddata->hpd_gpio, "hdmi_hpd");
+
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = hdmic_default_timings;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
index ba7ed4039f8a..dd29dc5c77ec 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
@@ -11,11 +11,11 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
index 09a59bd93d61..7bac420169a6 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -18,7 +19,8 @@ struct panel_drv_data {
 	struct omap_dss_device dssdev;
 	struct omap_dss_device *in;
 
-	int pd_gpio;
+	struct gpio_desc *pd_gpio;
+
 	int data_lines;
 
 	struct omap_video_timings timings;
@@ -86,8 +88,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -102,8 +104,8 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 1);
 
 	in->ops.dpi->disable(in);
 
@@ -162,33 +164,6 @@ static const struct omapdss_dvi_ops tfp410_dvi_ops = {
 	.get_timings	= tfp410_get_timings,
 };
 
-static int tfp410_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
-
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->pd_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse PD gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tfp410_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -204,18 +179,21 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	r = tfp410_probe_of(pdev);
-	if (r)
+	ddata->pd_gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+						 GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->pd_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request PD GPIO: %d\n", r);
 		return r;
+	}
 
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
-				GPIOF_OUT_INIT_LOW, "tfp410 PD");
-		if (r) {
-			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			goto err_gpio;
-		}
+	gpiod_set_consumer_name(ddata->pd_gpio, "tfp410 PD");
+
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
+		return r;
 	}
 
 	dssdev = &ddata->dssdev;
@@ -235,7 +213,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	return 0;
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
index ff3d1e8e1e7b..9790053c5877 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
@@ -6,15 +6,13 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 #include <video/of_display_timing.h>
 
 struct panel_drv_data {
@@ -25,9 +23,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -77,9 +72,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
 
 	gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -93,9 +85,6 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	in->ops.dpi->disable(in);
@@ -146,49 +135,6 @@ static struct omap_dss_driver panel_dpi_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int panel_dpi_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_dpi_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-	struct videomode vm;
-	int r;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	videomode_from_timing(pdata->display_timing, &vm);
-	videomode_to_omap_video_timings(&vm, &ddata->videomode);
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
-					GPIOF_OUT_INIT_LOW, "panel enable");
-	if (r)
-		goto err_gpio;
-
-	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
-
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
 static int panel_dpi_probe_of(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
@@ -205,8 +151,6 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	r = of_get_display_timing(node, "panel-timing", &timing);
 	if (r) {
 		dev_err(&pdev->dev, "failed to get video timing\n");
@@ -233,30 +177,18 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (ddata == NULL)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, ddata);
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = panel_dpi_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = panel_dpi_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
+	r = panel_dpi_probe_of(pdev);
+	if (r)
+		return r;
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = &pdev->dev;
@@ -275,7 +207,6 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index a2c7c5cb1523..4fc4b26a8d30 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -10,8 +10,9 @@
 
 #include <linux/backlight.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
@@ -20,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 #include <video/mipi_display.h>
@@ -53,8 +53,8 @@ struct panel_drv_data {
 	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
 
 	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *ext_te_gpio;
 
 	bool use_dsi_backlight;
 
@@ -250,8 +250,8 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	in->ops.dsi->disable(in, false, true);
 
@@ -292,8 +292,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 		goto err2;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -306,8 +306,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 
 	r = dsicm_panel_reset(ddata);
 	if (!r) {
-		if (gpio_is_valid(ddata->ext_te_gpio))
-			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+		if (ddata->ext_te_gpio)
+			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 		ddata->ulps_enabled = false;
 	}
 err1:
@@ -556,16 +556,19 @@ static const struct attribute_group dsicm_attr_group = {
 
 static void dsicm_hw_reset(struct panel_drv_data *ddata)
 {
-	if (!gpio_is_valid(ddata->reset_gpio))
-		return;
-
-	gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	udelay(10);
 	/* reset the panel */
-	gpio_set_value(ddata->reset_gpio, 0);
-	/* assert reset */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
+	/* keep reset asserted */
 	udelay(10);
-	gpio_set_value(ddata->reset_gpio, 1);
+	/* release reset line */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	/* wait after releasing reset */
 	usleep_range(5000, 10000);
 }
@@ -886,7 +889,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+	if (ddata->te_enabled && ddata->ext_te_gpio) {
 		schedule_delayed_work(&ddata->te_timeout_work,
 				msecs_to_jiffies(250));
 		atomic_set(&ddata->do_update, 1);
@@ -933,7 +936,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
 
-	if (!gpio_is_valid(ddata->ext_te_gpio))
+	if (!ddata->ext_te_gpio)
 		in->ops.dsi->enable_te(in, enable);
 
 	/* possible panel bug */
@@ -1115,41 +1118,6 @@ static struct omap_dss_driver dsicm_ops = {
 	.memory_read	= dsicm_memory_read,
 };
 
-static int dsicm_probe_of(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse reset gpio\n");
-		return gpio;
-	}
-	ddata->reset_gpio = gpio;
-
-	gpio = of_get_named_gpio(node, "te-gpios", 0);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ext_te_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse TE gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	/* TODO: ulps, backlight */
-
-	return 0;
-}
-
 static int dsicm_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
@@ -1171,9 +1139,12 @@ static int dsicm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->pdev = pdev;
 
-	r = dsicm_probe_of(pdev);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->timings.x_res = 864;
 	ddata->timings.y_res = 480;
@@ -1200,24 +1171,27 @@ static int dsicm_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->do_update, 0);
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dev, "failed to request reset gpio\n");
-			return r;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request reset gpio: %d\n", r);
+		return r;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dev, "GPIO request failed\n");
-			return r;
-		}
+	gpiod_set_consumer_name(ddata->reset_gpio, "taal rst");
 
-		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+	ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
+						     GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->ext_te_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request TE gpio: %d\n", r);
+		return r;
+	}
+
+	if (ddata->ext_te_gpio) {
+		gpiod_set_consumer_name(ddata->ext_te_gpio, "taal irq");
+
+		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
 				dsicm_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", ddata);
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
index 3ce1f9d2e7c4..e69856cb62d5 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <video/omapfb_dss.h>
 
@@ -46,9 +46,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -166,9 +163,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -185,9 +179,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	in->ops.dpi->disable(in);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -250,8 +241,6 @@ static int lb035q02_probe_of(struct spi_device *spi)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	in = omapdss_of_find_source_for_first_ep(node);
 	if (IS_ERR(in)) {
 		dev_err(&spi->dev, "failed to find video source\n");
@@ -284,13 +273,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
 	ddata->videomode = lb035q02_timings;
 
 	dssdev = &ddata->dssdev;
@@ -310,7 +292,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
index b407173e27b1..33563953b2ff 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
@@ -7,12 +7,12 @@
  * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/spi/spi.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
 
 #include <video/omapfb_dss.h>
 
@@ -24,8 +24,7 @@ struct panel_drv_data {
 
 	int data_lines;
 
-	int res_gpio;
-	int qvga_gpio;
+	struct gpio_desc *res_gpio;
 
 	struct spi_device *spi;
 };
@@ -155,8 +154,8 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 1);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 1);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -171,8 +170,8 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 0);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 0);
 
 	in->ops.dpi->disable(in);
 
@@ -222,35 +221,6 @@ static struct omap_dss_driver nec_8048_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int nec_8048_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->res_gpio = gpio;
-
-	/* XXX the panel spec doesn't mention any QVGA pin?? */
-	ddata->qvga_gpio = -ENOENT;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int nec_8048_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -281,24 +251,22 @@ static int nec_8048_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = nec_8048_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
-
-	if (gpio_is_valid(ddata->qvga_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
-		if (r)
-			goto err_gpio;
 	}
 
-	if (gpio_is_valid(ddata->res_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RES");
-		if (r)
-			goto err_gpio;
+	ddata->res_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->res_gpio);
+	if (r) {
+		dev_err(&spi->dev, "failed to request reset gpio: %d\n", r);
+		goto err_gpio;
 	}
 
+	gpiod_set_consumer_name(ddata->res_gpio, "lcd RES");
+
 	ddata->videomode = nec_8048_panel_timings;
 
 	dssdev = &ddata->dssdev;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
index f1072c319de8..cc30758300e2 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
@@ -7,10 +7,9 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index c0965bee12c5..685c63aa4e03 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -18,12 +18,10 @@
 #include <linux/sched.h>
 #include <linux/backlight.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 #define MIPID_CMD_READ_DISP_ID		0x04
 #define MIPID_CMD_READ_RED		0x06
@@ -57,7 +55,8 @@ struct panel_drv_data {
 	struct omap_dss_device	dssdev;
 	struct omap_dss_device *in;
 
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
+
 	int datapairs;
 
 	struct omap_video_timings videomode;
@@ -546,8 +545,13 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	/*FIXME tweak me */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	if (ddata->enabled) {
 		dev_dbg(&ddata->spi->dev, "panel already enabled\n");
@@ -596,8 +600,9 @@ static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
 	 */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	/* see comment in acx565akm_panel_power_on() */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	/* FIXME need to tweak this delay */
 	msleep(100);
@@ -688,48 +693,6 @@ static struct omap_dss_driver acx565akm_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int acx565akm_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_acx565akm_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->reset_gpio = pdata->reset_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->datapairs = pdata->datapairs;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int acx565akm_probe_of(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct device_node *np = spi->dev.of_node;
-
-	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
-
-	ddata->in = omapdss_of_find_source_for_first_ep(np);
-	if (IS_ERR(ddata->in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(ddata->in);
-	}
-
-	return 0;
-}
-
 static int acx565akm_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -741,6 +704,9 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	dev_dbg(&spi->dev, "%s\n", __func__);
 
+	if (!spi->dev.of_node)
+		return -ENODEV;
+
 	spi->mode = SPI_MODE_3;
 
 	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
@@ -753,28 +719,25 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	mutex_init(&ddata->mutex);
 
-	if (dev_get_platdata(&spi->dev)) {
-		r = acx565akm_probe_pdata(spi);
-		if (r)
-			return r;
-	} else if (spi->dev.of_node) {
-		r = acx565akm_probe_of(spi);
-		if (r)
-			return r;
-	} else {
-		dev_err(&spi->dev, "platform data missing!\n");
-		return -ENODEV;
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return r;
 	}
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd reset");
-		if (r)
-			goto err_gpio;
-	}
+	ddata->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+						    GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r)
+		goto err_gpio;
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	if (ddata->reset_gpio) {
+		gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
+		/* release the reset line */
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
+	}
 
 	/*
 	 * After reset we have to wait 5 msec before the first
@@ -786,8 +749,8 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	r = panel_detect(ddata);
 
-	if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	if (!ddata->enabled && ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	if (r) {
 		dev_err(&spi->dev, "%s panel detect error\n", __func__);
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
index 3c0f887d3092..c18d290693c1 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <video/omapfb_dss.h>
 
 struct panel_drv_data {
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
index c0e4e0315b6b..1eaa35c27835 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -10,10 +10,9 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -58,7 +57,7 @@ struct panel_drv_data {
 
 	struct spi_device *spi;
 	struct regulator *vcc_reg;
-	int nreset_gpio;
+	struct gpio_desc *reset_gpio;
 	u16 gamma[12];
 	u32 mode;
 	u32 hmirror:1;
@@ -296,8 +295,7 @@ static int tpo_td043_power_on(struct panel_drv_data *ddata)
 	/* wait for panel to stabilize */
 	msleep(160);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 1);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	tpo_td043_write(ddata->spi, 2,
 			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
@@ -320,8 +318,7 @@ static void tpo_td043_power_off(struct panel_drv_data *ddata)
 	tpo_td043_write(ddata->spi, 3,
 			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 0);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	/* wait for at least 2 vsyncs before cutting off power */
 	msleep(50);
@@ -454,32 +451,6 @@ static struct omap_dss_driver tpo_td043_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int tpo_td043_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->nreset_gpio = gpio;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tpo_td043_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -508,9 +479,12 @@ static int tpo_td043_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = tpo_td043_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->mode = TPO_R02_MODE_800x480;
 	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
@@ -521,16 +495,15 @@ static int tpo_td043_probe(struct spi_device *spi)
 		goto err_regulator;
 	}
 
-	if (gpio_is_valid(ddata->nreset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev,
-				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (r < 0) {
-			dev_err(&spi->dev, "couldn't request reset GPIO\n");
-			goto err_gpio_req;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&spi->dev, "couldn't request reset GPIO\n");
+		goto err_gpio_req;
 	}
 
+	gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
 	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
 	if (r) {
 		dev_err(&spi->dev, "failed to create sysfs files\n");
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
index cb63bc0e92ca..b33f62c5cb22 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
@@ -129,7 +129,6 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 {
 	void __iomem *base = core->base;
 	u8 cur_addr;
-	char checksum = 0;
 	const int retries = 1000;
 	u8 seg_ptr = ext / 2;
 	u8 edidbase = ((ext % 2) * 0x80);
@@ -178,7 +177,6 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 		}
 
 		pedid[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
-		checksum += pedid[cur_addr];
 	}
 
 	return 0;
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 0823c9de859a..47d212944f30 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -1533,8 +1533,10 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	info = framebuffer_alloc(sizeof(struct pm2fb_par), &pdev->dev);
-	if (!info)
-		return -ENOMEM;
+	if (!info) {
+		err = -ENOMEM;
+		goto err_exit_disable;
+	}
 	default_par = info->par;
 
 	switch (pdev->device) {
@@ -1715,6 +1717,8 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
  err_exit_neither:
 	framebuffer_release(info);
+ err_exit_disable:
+	pci_disable_device(pdev);
 	return retval;
 }
 
@@ -1739,6 +1743,7 @@ static void pm2fb_remove(struct pci_dev *pdev)
 	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	framebuffer_release(info);
+	pci_disable_device(pdev);
 }
 
 static const struct pci_device_id pm2fb_id_table[] = {
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 696ac5431180..c46ed78298ae 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2327,7 +2327,6 @@ static int pxafb_probe(struct platform_device *dev)
 
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
-		dev_err(&dev->dev, "no IRQ defined\n");
 		ret = -ENODEV;
 		goto failed_free_mem;
 	}
diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 6d00893d41f4..ad9323ed8e2e 100644
--- a/drivers/video/fbdev/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
@@ -1188,7 +1188,7 @@ overlay_alpha_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->alpha);
+	return sysfs_emit(buf, "%u\n", ovl->alpha);
 }
 
 static ssize_t
@@ -1226,7 +1226,7 @@ overlay_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->mode);
+	return sysfs_emit(buf, "%u\n", ovl->mode);
 }
 
 static ssize_t
@@ -1265,7 +1265,7 @@ overlay_position_show(struct device *dev, struct device_attribute *attr,
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%d,%d\n", ovl->pos_x, ovl->pos_y);
+	return sysfs_emit(buf, "%d,%d\n", ovl->pos_x, ovl->pos_y);
 }
 
 static ssize_t
@@ -1306,7 +1306,7 @@ overlay_rop3_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->rop3);
+	return sysfs_emit(buf, "%u\n", ovl->rop3);
 }
 
 static ssize_t
diff --git a/drivers/video/fbdev/smscufx.c b/drivers/video/fbdev/smscufx.c
index 9343b7a4ac89..2ad6e98ce10d 100644
--- a/drivers/video/fbdev/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
@@ -1622,7 +1622,7 @@ static int ufx_usb_probe(struct usb_interface *interface,
 	struct usb_device *usbdev;
 	struct ufx_data *dev;
 	struct fb_info *info;
-	int retval;
+	int retval = -ENOMEM;
 	u32 id_rev, fpga_rev;
 
 	/* usb initialization */
@@ -1654,15 +1654,17 @@ static int ufx_usb_probe(struct usb_interface *interface,
 
 	if (!ufx_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
 		dev_err(dev->gdev, "ufx_alloc_urb_list failed\n");
-		goto e_nomem;
+		goto put_ref;
 	}
 
 	/* We don't register a new USB class. Our client interface is fbdev */
 
 	/* allocates framebuffer driver structure, not framebuffer memory */
 	info = framebuffer_alloc(0, &usbdev->dev);
-	if (!info)
-		goto e_nomem;
+	if (!info) {
+		dev_err(dev->gdev, "framebuffer_alloc failed\n");
+		goto free_urb_list;
+	}
 
 	dev->info = info;
 	info->par = dev;
@@ -1705,22 +1707,34 @@ static int ufx_usb_probe(struct usb_interface *interface,
 	check_warn_goto_error(retval, "unable to find common mode for display and adapter");
 
 	retval = ufx_reg_set_bits(dev, 0x4000, 0x00000001);
-	check_warn_goto_error(retval, "error %d enabling graphics engine", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d enabling graphics engine", retval);
+		goto setup_modes;
+	}
 
 	/* ready to begin using device */
 	atomic_set(&dev->usb_active, 1);
 
 	dev_dbg(dev->gdev, "checking var");
 	retval = ufx_ops_check_var(&info->var, info);
-	check_warn_goto_error(retval, "error %d ufx_ops_check_var", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d ufx_ops_check_var", retval);
+		goto reset_active;
+	}
 
 	dev_dbg(dev->gdev, "setting par");
 	retval = ufx_ops_set_par(info);
-	check_warn_goto_error(retval, "error %d ufx_ops_set_par", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d ufx_ops_set_par", retval);
+		goto reset_active;
+	}
 
 	dev_dbg(dev->gdev, "registering framebuffer");
 	retval = register_framebuffer(info);
-	check_warn_goto_error(retval, "error %d register_framebuffer", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d register_framebuffer", retval);
+		goto reset_active;
+	}
 
 	dev_info(dev->gdev, "SMSC UDX USB device /dev/fb%d attached. %dx%d resolution."
 		" Using %dK framebuffer memory\n", info->node,
@@ -1728,21 +1742,23 @@ static int ufx_usb_probe(struct usb_interface *interface,
 
 	return 0;
 
-error:
-	fb_dealloc_cmap(&info->cmap);
-destroy_modedb:
+reset_active:
+	atomic_set(&dev->usb_active, 0);
+setup_modes:
 	fb_destroy_modedb(info->monspecs.modedb);
 	vfree(info->screen_base);
 	fb_destroy_modelist(&info->modelist);
+error:
+	fb_dealloc_cmap(&info->cmap);
+destroy_modedb:
 	framebuffer_release(info);
+free_urb_list:
+	if (dev->urbs.count > 0)
+		ufx_free_urb_list(dev);
 put_ref:
 	kref_put(&dev->kref, ufx_free); /* ref for framebuffer */
 	kref_put(&dev->kref, ufx_free); /* last ref from kref_init */
 	return retval;
-
-e_nomem:
-	retval = -ENOMEM;
-	goto put_ref;
 }
 
 static void ufx_usb_disconnect(struct usb_interface *interface)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 5c891aa00d59..046b9990d27c 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -803,10 +803,8 @@ static int ssd1307fb_probe(struct i2c_client *client)
 bl_init_error:
 	unregister_framebuffer(info);
 panel_init_error:
-	if (par->device_info->need_pwm) {
-		pwm_disable(par->pwm);
-		pwm_put(par->pwm);
-	}
+	pwm_disable(par->pwm);
+	pwm_put(par->pwm);
 regulator_enable_error:
 	if (par->vbat_reg)
 		regulator_disable(par->vbat_reg);
@@ -827,10 +825,8 @@ static void ssd1307fb_remove(struct i2c_client *client)
 	backlight_device_unregister(info->bl_dev);
 
 	unregister_framebuffer(info);
-	if (par->device_info->need_pwm) {
-		pwm_disable(par->pwm);
-		pwm_put(par->pwm);
-	}
+	pwm_disable(par->pwm);
+	pwm_put(par->pwm);
 	if (par->vbat_reg)
 		regulator_disable(par->vbat_reg);
 	fb_deferred_io_cleanup(info);
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 00d789b6c0fa..f09f483c219b 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -1580,7 +1580,7 @@ static ssize_t uvesafb_show_vendor(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_vendor_name_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_vendor_name_ptr);
 	else
 		return 0;
@@ -1595,7 +1595,7 @@ static ssize_t uvesafb_show_product_name(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_product_name_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_product_name_ptr);
 	else
 		return 0;
@@ -1610,7 +1610,7 @@ static ssize_t uvesafb_show_product_rev(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_product_rev_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_product_rev_ptr);
 	else
 		return 0;
@@ -1625,7 +1625,7 @@ static ssize_t uvesafb_show_oem_string(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_string_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n",
+		return sysfs_emit(buf, "%s\n",
 			(char *)(&par->vbe_ib) + par->vbe_ib.oem_string_ptr);
 	else
 		return 0;
@@ -1639,7 +1639,7 @@ static ssize_t uvesafb_show_nocrtc(struct device *dev,
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct uvesafb_par *par = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", par->nocrtc);
+	return sysfs_emit(buf, "%d\n", par->nocrtc);
 }
 
 static ssize_t uvesafb_store_nocrtc(struct device *dev,
@@ -1758,6 +1758,7 @@ static int uvesafb_probe(struct platform_device *dev)
 out_unmap:
 	iounmap(info->screen_base);
 out_mem:
+	arch_phys_wc_del(par->mtrr_handle);
 	release_mem_region(info->fix.smem_start, info->fix.smem_len);
 out_reg:
 	release_region(0x3c0, 32);
@@ -1776,25 +1777,23 @@ static int uvesafb_probe(struct platform_device *dev)
 static int uvesafb_remove(struct platform_device *dev)
 {
 	struct fb_info *info = platform_get_drvdata(dev);
+	struct uvesafb_par *par = info->par;
 
-	if (info) {
-		struct uvesafb_par *par = info->par;
+	sysfs_remove_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
+	unregister_framebuffer(info);
+	release_region(0x3c0, 32);
+	iounmap(info->screen_base);
+	arch_phys_wc_del(par->mtrr_handle);
+	release_mem_region(info->fix.smem_start, info->fix.smem_len);
+	fb_destroy_modedb(info->monspecs.modedb);
+	fb_dealloc_cmap(&info->cmap);
 
-		sysfs_remove_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
-		unregister_framebuffer(info);
-		release_region(0x3c0, 32);
-		iounmap(info->screen_base);
-		arch_phys_wc_del(par->mtrr_handle);
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-		fb_destroy_modedb(info->monspecs.modedb);
-		fb_dealloc_cmap(&info->cmap);
+	kfree(par->vbe_modes);
+	kfree(par->vbe_state_orig);
+	kfree(par->vbe_state_saved);
 
-		kfree(par->vbe_modes);
-		kfree(par->vbe_state_orig);
-		kfree(par->vbe_state_saved);
+	framebuffer_release(info);
 
-		framebuffer_release(info);
-	}
 	return 0;
 }
 
diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 1465fb7b619e..0374ee6b6d03 100644
--- a/drivers/video/fbdev/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
@@ -278,8 +278,10 @@ static int vmlfb_get_gpu(struct vml_par *par)
 
 	mutex_unlock(&vml_mutex);
 
-	if (pci_enable_device(par->gpu) < 0)
+	if (pci_enable_device(par->gpu) < 0) {
+		pci_dev_put(par->gpu);
 		return -ENODEV;
+	}
 
 	return 0;
 }
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 32a6399b080b..2c1803eb196f 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -733,7 +733,14 @@ static int __init via_core_init(void)
 		return ret;
 	viafb_i2c_init();
 	viafb_gpio_init();
-	return pci_register_driver(&via_driver);
+	ret = pci_register_driver(&via_driver);
+	if (ret) {
+		viafb_gpio_exit();
+		viafb_i2c_exit();
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit via_core_exit(void)
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
deleted file mode 100644
index 42b77249ee14..000000000000
--- a/include/video/omap-panel-data.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header containing platform_data structs for omap panels
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *	   Archit Taneja <archit@ti.com>
- *
- * Copyright (C) 2011 Texas Instruments
- * Author: Mayuresh Janorkar <mayur@ti.com>
- *
- * Copyright (C) 2010 Canonical Ltd.
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-
-#ifndef __OMAP_PANEL_DATA_H
-#define __OMAP_PANEL_DATA_H
-
-#include <video/display_timing.h>
-
-/**
- * connector_atv platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @invert_polarity: invert signal polarity
- */
-struct connector_atv_platform_data {
-	const char *name;
-	const char *source;
-
-	bool invert_polarity;
-};
-
-/**
- * panel_dpi platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @data_lines: number of DPI datalines
- * @display_timing: timings for this panel
- * @backlight_gpio: gpio to enable/disable the backlight (or -1)
- * @enable_gpio: gpio to enable/disable the panel (or -1)
- */
-struct panel_dpi_platform_data {
-	const char *name;
-	const char *source;
-
-	int data_lines;
-
-	const struct display_timing *display_timing;
-
-	int backlight_gpio;
-	int enable_gpio;
-};
-
-/**
- * panel_acx565akm platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @reset_gpio: gpio to reset the panel (or -1)
- * @datapairs: number of SDI datapairs
- */
-struct panel_acx565akm_platform_data {
-	const char *name;
-	const char *source;
-
-	int reset_gpio;
-
-	int datapairs;
-};
-
-#endif /* __OMAP_PANEL_DATA_H */