diff --git a/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi
index bfc58a6589d3..6a8f1accd260 100644
--- a/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi
@@ -75,6 +75,16 @@ pm8010_m_e1_temp_alarm: temp-alarm@2400 {
 			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
+
+		pm8010_m_e1_gpios: gpio@c000 {
+			compatible = "qcom,pm8010-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8010_m_e1_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8010_n_e1: pmic@d {
@@ -89,5 +99,15 @@ pm8010_n_e1_temp_alarm: temp-alarm@2400 {
 			interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
+
+		pm8010_n_e1_gpios: gpio@c000 {
+			compatible = "qcom,pm8010-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8010_n_e1_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index ef330194946b..031fcf38f3d1 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -64,6 +64,16 @@ pm8010_m_temp_alarm: temp-alarm@2400 {
 			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
+
+		pm8010_m_gpios: gpio@c000 {
+			compatible = "qcom,pm8010-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8010_m_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8010_n: pmic@d {
@@ -78,5 +88,15 @@ pm8010_n_temp_alarm: temp-alarm@2400 {
 			interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
+
+		pm8010_n_gpios: gpio@c000 {
+			compatible = "qcom,pm8010-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8010_n_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };