github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-21 13:27:57 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

eth: Fix typo 'accelaration'. 'exprienced' and 'rewritting'

Browse Source 
There are some spelling mistakes of 'accelaration', 'exprienced' and
'rewritting' in comments which should be 'acceleration', 'experienced'
and 'rewriting'.

Suggested-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20241017162846.GA51712@kernel.org/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <90D42CB167CA0842+20241018021910.31359-1-wangyuli@uniontech.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This commit is contained in:
WangYuli 2024-10-18 10:19:10 +08:00 committed by Andrew Lunn
parent c4e64095c0
commit 9e2ffec543
3 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/net/ethernet/broadcom/bnxt/bnxt.c
View File

@ -12881,7 +12881,7 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev,
if (features & NETIF_F_GRO_HW)
features &= ~NETIF_F_LRO;
/* Both CTAG and STAG VLAN accelaration on the RX side have to be
/* Both CTAG and STAG VLAN acceleration on the RX side have to be
* turned on or off together.
*/
vlan_features = features & BNXT_HW_FEATURE_VLAN_ALL_RX;
@ -16131,7 +16131,7 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
* At this point, the card has exprienced a hard reset,
* At this point, the card has experienced a hard reset,
* followed by fixups by BIOS, and has its config space
* set up identically to what it was at cold boot.
*/
@ -16159,7 +16159,7 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
pci_set_master(pdev);
/* Upon fatal error, our device internal logic that latches to
* BAR value is getting reset and will restore only upon
* rewritting the BARs.
* rewriting the BARs.
*
* As pci_restore_state() does not re-write the BARs if the
* value is same as saved value earlier, driver needs to

2
drivers/net/ethernet/broadcom/tg3.c
View File

@ -18275,7 +18275,7 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev,
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
* At this point, the card has exprienced a hard reset,
* At this point, the card has experienced a hard reset,
* followed by fixups by BIOS, and has its config space
* set up identically to what it was at cold boot.
*/

2
drivers/net/ethernet/neterion/s2io.c
View File

@ -8523,7 +8523,7 @@ static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
* At this point, the card has exprienced a hard reset,
* At this point, the card has experienced a hard reset,
* followed by fixups by BIOS, and has its config space
* set up identically to what it was at cold boot.
*/