diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index d050adfe860a..52a5c0922c79 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -319,7 +319,6 @@ config USB_NET_DM9601
 config USB_NET_SR9700
 	tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
 	depends on USB_USBNET
-	select CRC32
 	help
 	  This option adds support for CoreChip-sz SR9700 based USB 1.1
 	  10/100 Ethernet adapters.
diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c
index 49764bcf0912..937e6fef3ac6 100644
--- a/drivers/net/usb/sr9700.c
+++ b/drivers/net/usb/sr9700.c
@@ -17,7 +17,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/usb.h>
-#include <linux/crc32.h>
 #include <linux/usb/usbnet.h>
 
 #include "sr9700.h"
@@ -231,31 +230,15 @@ static const struct ethtool_ops sr9700_ethtool_ops = {
 static void sr9700_set_multicast(struct net_device *netdev)
 {
 	struct usbnet *dev = netdev_priv(netdev);
-	/* We use the 20 byte dev->data for our 8 byte filter buffer
-	 * to avoid allocating memory that is tricky to free later
-	 */
-	u8 *hashes = (u8 *)&dev->data;
 	/* rx_ctl setting : enable, disable_long, disable_crc */
 	u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
 
-	memset(hashes, 0x00, SR_MCAST_SIZE);
-	/* broadcast address */
-	hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
-	if (netdev->flags & IFF_PROMISC) {
+	if (netdev->flags & IFF_PROMISC)
 		rx_ctl |= RCR_PRMSC;
-	} else if (netdev->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(netdev) > SR_MCAST_MAX) {
-		rx_ctl |= RCR_RUNT;
-	} else if (!netdev_mc_empty(netdev)) {
-		struct netdev_hw_addr *ha;
+	else if (netdev->flags & IFF_ALLMULTI || !netdev_mc_empty(netdev))
+		/* The chip has no multicast filter */
+		rx_ctl |= RCR_ALL;
 
-		netdev_for_each_mc_addr(ha, netdev) {
-			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
-			hashes[crc >> 3] |= 1 << (crc & 0x7);
-		}
-	}
-
-	sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes);
 	sr_write_reg_async(dev, SR_RCR, rx_ctl);
 }
 
diff --git a/drivers/net/usb/sr9700.h b/drivers/net/usb/sr9700.h
index 5c04ea0306c7..d1663cb1e8cd 100644
--- a/drivers/net/usb/sr9700.h
+++ b/drivers/net/usb/sr9700.h
@@ -101,9 +101,7 @@
 #define		WCR_LINKEN		(1 << 5)
 /* Physical Address Reg */
 #define	SR_PAR			0x10	/* 0x10 ~ 0x15 6 bytes for PAR */
-/* Multicast Address Reg */
-#define	SR_MAR			0x16	/* 0x16 ~ 0x1D 8 bytes for MAR */
-/* 0x1e unused */
+/* 0x16 --> 0x1E unused */
 /* Phy Reset Reg */
 #define	SR_PRR			0x1F
 #define		PRR_PHY_RST		(1 << 0)
@@ -158,9 +156,6 @@
 /* parameters */
 #define	SR_EEPROM_TIMEOUT	1000
 #define	SR_EEPROM_LEN		256
-#define	SR_MCAST_SIZE		8
-#define	SR_MCAST_ADDR_FLAG	0x80
-#define	SR_MCAST_MAX		64
 #define	SR_TX_OVERHEAD		2	/* 2bytes header */
 #define	SR_RX_OVERHEAD		7	/* 3bytes header + 4crc tail */