github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-02 11:33:28 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr

Browse Source 
The `cpu-release-addr` property is relevant only when the "spin-table"
enable method is used. It is the physical address where the bootloader
expects Linux to write the secondary CPU entry point's physical address.
On this platform, only the CFE bootloader uses this method: U-Boot uses
PSCI instead.

CFE actually walks the FDT to learn this address, so we're free to put
it wherever we want. We only need to make sure that it goes in a
reserved-memory block so that writing to it during early boot does not
risk conflicting with an unrelated memory allocation: this was not done.

Since the previous patch reserved the first page of memory for CFE's
secondary-CPU init stub, which is actually much smaller than a page,
just put this address at the end of that page and it shall be so
protected.

Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20241005050155.61103-3-CFSworks@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This commit is contained in:
Sam Edwards 2024-10-04 22:01:55 -07:00 committed by Florian Fainelli
parent cef313931d
commit 95d56dfaa0
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
View File

@ -30,7 +30,7 @@ cpu0: cpu@0 {
compatible = "brcm,brahma-b53";
reg = <0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0xfff8>;
cpu-release-addr = <0x0 0xff8>;
next-level-cache = <&l2>;
};
@ -39,7 +39,7 @@ cpu1: cpu@1 {
compatible = "brcm,brahma-b53";
reg = <0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0xfff8>;
cpu-release-addr = <0x0 0xff8>;
next-level-cache = <&l2>;
};
@ -48,7 +48,7 @@ cpu2: cpu@2 {
compatible = "brcm,brahma-b53";
reg = <0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0xfff8>;
cpu-release-addr = <0x0 0xff8>;
next-level-cache = <&l2>;
};
@ -57,7 +57,7 @@ cpu3: cpu@3 {
compatible = "brcm,brahma-b53";
reg = <0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0xfff8>;
cpu-release-addr = <0x0 0xff8>;
next-level-cache = <&l2>;
};